New Terratec Cinergy S2 Box usb-id
Commit Message
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256
Dear all,
I am currently figuring out how to get the Terratec Cinergy S2 USB Box
up and running. I already modified a patch to previous version (see
attachment) to include the new ID in the device driver, module is also
loading with the ds3000 firmware. However, when using w_scan, the
reported frequency range is .95GHz ... 2.15Ghz which is roughly a
factor of 10 lower than I expected (Astra is 12.515Ghz e.g.). Since
the tuner seems to tune in correctly but in the wrong frequency range,
I feel that is the reason for me not getting in any channels.
Can you help me with what to change in the driver to get this working
? I feel like an additional .frequency_div should do the job, however
I am unable to find further informaion on that...
Best
Maximilian Imgrund
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iF4EAREIAAYFAlXkOFIACgkQR/X5cR0fI/6sfAD+OVauTyLw0oWSMr8ONzmrguF+
Ci/vg4uO9mxZwzjgGXkA/ipgQ/IuX+8n2CSScHg6CFjt9tIBbFOAVzStuUrOpwx2
=AAXS
-----END PGP SIGNATURE-----
Comments
On 08/31/2015 01:19 PM, Maximilian Imgrund wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA256
>
> Dear all,
>
> I am currently figuring out how to get the Terratec Cinergy S2 USB Box
> up and running. I already modified a patch to previous version (see
> attachment) to include the new ID in the device driver, module is also
> loading with the ds3000 firmware. However, when using w_scan, the
> reported frequency range is .95GHz ... 2.15Ghz which is roughly a
> factor of 10 lower than I expected (Astra is 12.515Ghz e.g.). Since
> the tuner seems to tune in correctly but in the wrong frequency range,
> I feel that is the reason for me not getting in any channels.
>
> Can you help me with what to change in the driver to get this working
> ? I feel like an additional .frequency_div should do the job, however
> I am unable to find further informaion on that...
>
> Best
> Maximilian Imgrund
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v2
>
> iF4EAREIAAYFAlXkOFIACgkQR/X5cR0fI/6sfAD+OVauTyLw0oWSMr8ONzmrguF+
> Ci/vg4uO9mxZwzjgGXkA/ipgQ/IuX+8n2CSScHg6CFjt9tIBbFOAVzStuUrOpwx2
> =AAXS
> -----END PGP SIGNATURE-----
>
The driver has to tune to the intermediate frequency
that's output by the LNB. (There is a local oscillator+downmixer in there...)
This is what the one here has
info = {
name = "ST STV0299 DVB-S", '\000' <repeats 111 times>, type = FE_QPSK,
frequency_min = 950000, frequency_max = 2150000,
frequency_stepsize = 125, frequency_tolerance = 0,
symbol_rate_min = 1000000, symbol_rate_max = 45000000,
symbol_rate_tolerance = 500, notifier_delay = 0,
caps = (FE_CAN_INVERSION_AUTO | FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | FE_CAN_QPSK)},
Frequency_min and max match yours.
Try a different scan tool, and make sure you get a signal out of your LNB.
Proper DISH ALIGNMENT is important,
and don't forget a grounding bloc.
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
@@ -1657,6 +1657,7 @@
GOTVIEW_SAT_HD,
GENIATECH_T220,
TECHNOTREND_S2_4600,
+ TERRATEC_CINERGY_S2_R3,
};
static struct usb_device_id dw2102_table[] = {
@@ -1682,6 +1683,7 @@
[GENIATECH_T220] = {USB_DEVICE(0x1f4d, 0xD220)},
[TECHNOTREND_S2_4600] = {USB_DEVICE(USB_VID_TECHNOTREND,
USB_PID_TECHNOTREND_CONNECT_S2_4600)},
+ [TERRATEC_CINERGY_S2_R3] = {USB_DEVICE(USB_VID_TERRATEC, 0x0105)},
{ }
};
@@ -2085,7 +2087,7 @@
}},
}
},
- .num_device_descs = 5,
+ .num_device_descs = 6,
.devices = {
{ "SU3000HD DVB-S USB2.0",
{ &dw2102_table[GENIATECH_SU3000], NULL },
@@ -2107,6 +2109,10 @@
{ &dw2102_table[GOTVIEW_SAT_HD], NULL },
{ NULL },
},
+ { "Terratec Cinergy S2 USB HD Rev.3",
+ { &dw2102_table[TERRATEC_CINERGY_S2_R3], NULL },
+ { NULL },
+ },
}
};