[RFC,v2,1/6] drm/i2c: tda998x: Add the required port property
Commit Message
According to the media video interface, the video source and sink
ports must be identified by mutual phandles.
This patch adds the 'port' property of the tda998x (sink side).
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
---
Documentation/devicetree/bindings/drm/i2c/tda998x.txt | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
@@ -17,13 +17,22 @@ Optional properties:
- video-ports: 24 bits value which defines how the video controller
output is wired to the TDA998x input - default: <0x230145>
+Required nodes:
+ - port: reference of the video source as described in media/video-interfaces
+
Example:
- tda998x: hdmi-encoder {
+ hdmi: hdmi-encoder {
compatible = "nxp,tda19988";
reg = <0x70>;
interrupt-parent = <&gpio0>;
interrupts = <27 2>; /* falling edge */
pinctrl-0 = <&pmx_camera>;
pinctrl-names = "default";
+
+ port {
+ hdmi_0: endpoint@0 {
+ remote-endpoint = <&lcd0_0>;
+ };
+ };
};