[2/2] media: rc: reduce useless padding in struct rc_dev and lirc_fh
Commit Message
Reorder the fields in these structs so that we waste less space due to
padding. pahole shows that lirc_fh is 8 bytes smaller, and rc_dev is 32
bytes smaller.
Signed-off-by: Sean Young <sean@mess.org>
---
include/media/rc-core.h | 46 ++++++++++++++++++++---------------------
1 file changed, 23 insertions(+), 23 deletions(-)
@@ -57,11 +57,11 @@ enum rc_filter_type {
* struct lirc_fh - represents an open lirc file
* @list: list of open file handles
* @rc: rcdev for this lirc chardev
- * @carrier_low: when setting the carrier range, first the low end must be
- * set with an ioctl and then the high end with another ioctl
* @rawir: queue for incoming raw IR
* @scancodes: queue for incoming decoded scancodes
* @wait_poll: poll struct for lirc device
+ * @carrier_low: when setting the carrier range, first the low end must be
+ * set with an ioctl and then the high end with another ioctl
* @send_mode: lirc mode for sending, either LIRC_MODE_SCANCODE or
* LIRC_MODE_PULSE
* @rec_mode: lirc mode for receiving, either LIRC_MODE_SCANCODE or
@@ -70,10 +70,10 @@ enum rc_filter_type {
struct lirc_fh {
struct list_head list;
struct rc_dev *rc;
- int carrier_low;
DECLARE_KFIFO_PTR(rawir, unsigned int);
DECLARE_KFIFO_PTR(scancodes, struct lirc_scancode);
wait_queue_head_t wait_poll;
+ int carrier_low;
u8 send_mode;
u8 rec_mode;
};
@@ -82,6 +82,12 @@ struct lirc_fh {
* struct rc_dev - represents a remote control device
* @dev: driver model's view of this device
* @managed_alloc: devm_rc_allocate_device was used to create rc_dev
+ * @registered: set to true by rc_register_device(), false by
+ * rc_unregister_device
+ * @idle: used to keep track of RX state
+ * @encode_wakeup: wakeup filtering uses IR encode API, therefore the allowed
+ * wakeup protocols is the set of all raw encoders
+ * @minor: unique minor remote control device number
* @sysfs_groups: sysfs attribute groups
* @device_name: name of the rc child device
* @input_phys: physical path to the input child device
@@ -91,13 +97,10 @@ struct lirc_fh {
* @rc_map: current scan/key table
* @lock: used to ensure we've filled in all protocol details before
* anyone can call show_protocols or store_protocols
- * @minor: unique minor remote control device number
* @raw: additional data for raw pulse/space devices
* @input_dev: the input child device used to communicate events to userspace
* @driver_type: specifies if protocol decoding is done in hardware or software
- * @idle: used to keep track of RX state
- * @encode_wakeup: wakeup filtering uses IR encode API, therefore the allowed
- * wakeup protocols is the set of all raw encoders
+ * @users: number of current users of the device
* @allowed_protocols: bitmask with the supported RC_PROTO_BIT_* protocols
* @enabled_protocols: bitmask with the enabled RC_PROTO_BIT_* protocols
* @allowed_wakeup_protocols: bitmask with the supported RC_PROTO_BIT_* wakeup
@@ -111,18 +114,17 @@ struct lirc_fh {
* anything with it. Yet, as the same keycode table can be used with other
* devices, a mask is provided to allow its usage. Drivers should generally
* leave this field in blank
- * @users: number of current users of the device
* @priv: driver-specific data
* @keylock: protects the remaining members of the struct
* @keypressed: whether a key is currently pressed
+ * @last_toggle: toggle value of last command
+ * @last_keycode: keycode of last keypress
+ * @last_protocol: protocol of last keypress
+ * @last_scancode: scancode of last keypress
* @keyup_jiffies: time (in jiffies) when the current keypress should be released
* @timer_keyup: timer for releasing a keypress
* @timer_repeat: timer for autorepeat events. This is needed for CEC, which
* has non-standard repeats.
- * @last_keycode: keycode of last keypress
- * @last_protocol: protocol of last keypress
- * @last_scancode: scancode of last keypress
- * @last_toggle: toggle value of last command
* @timeout: optional time after which device stops sending data
* @min_timeout: minimum timeout supported by device
* @max_timeout: maximum timeout supported by device
@@ -132,8 +134,6 @@ struct lirc_fh {
* @gap_start: start time for gap after timeout if non-zero
* @lirc_fh_lock: protects lirc_fh list
* @lirc_fh: list of open files
- * @registered: set to true by rc_register_device(), false by
- * rc_unregister_device
* @change_protocol: allow changing the protocol used on hardware decoders
* @open: callback to allow drivers to enable polling/irq when IR input device
* is opened.
@@ -157,6 +157,10 @@ struct lirc_fh {
struct rc_dev {
struct device dev;
bool managed_alloc;
+ bool registered;
+ bool idle;
+ bool encode_wakeup;
+ unsigned int minor;
const struct attribute_group *sysfs_groups[5];
const char *device_name;
const char *input_phys;
@@ -165,12 +169,10 @@ struct rc_dev {
const char *map_name;
struct rc_map rc_map;
struct mutex lock;
- unsigned int minor;
struct ir_raw_event_ctrl *raw;
struct input_dev *input_dev;
enum rc_driver_type driver_type;
- bool idle;
- bool encode_wakeup;
+ u32 users;
u64 allowed_protocols;
u64 enabled_protocols;
u64 allowed_wakeup_protocols;
@@ -178,17 +180,16 @@ struct rc_dev {
struct rc_scancode_filter scancode_filter;
struct rc_scancode_filter scancode_wakeup_filter;
u32 scancode_mask;
- u32 users;
void *priv;
spinlock_t keylock;
bool keypressed;
- unsigned long keyup_jiffies;
- struct timer_list timer_keyup;
- struct timer_list timer_repeat;
+ u8 last_toggle;
u32 last_keycode;
enum rc_proto last_protocol;
u64 last_scancode;
- u8 last_toggle;
+ unsigned long keyup_jiffies;
+ struct timer_list timer_keyup;
+ struct timer_list timer_repeat;
u32 timeout;
u32 min_timeout;
u32 max_timeout;
@@ -200,7 +201,6 @@ struct rc_dev {
spinlock_t lirc_fh_lock;
struct list_head lirc_fh;
#endif
- bool registered;
int (*change_protocol)(struct rc_dev *dev, u64 *rc_proto);
int (*open)(struct rc_dev *dev);
void (*close)(struct rc_dev *dev);