[v3,06/11] media: adv748x-csi2: Validate the image format

Message ID 20240509161403.111789-7-jacopo.mondi@ideasonboard.com (mailing list archive)
State New
Delegated to: Laurent Pinchart
Headers
Series media: renesas: rcar-csi2: Use the subdev active state |

Commit Message

Jacopo Mondi May 9, 2024, 4:13 p.m. UTC
  The adv748x-csi2 driver configures the CSI-2 transmitter to
automatically infer the image stream format from the connected
frontend (HDMI or AFE).

Setting a new format on the subdevice hence does not actually control
the CSI-2 output format, but it's only there for the purpose of
pipeline validation.

However, there is currently no validation that the supplied media bus
code is valid and supported by the device.

With the introduction of enum_mbus_codes a list of supported format is
now available, use it to validate that the supplied format is correct
and use the default UYVY8 one if that's not the case.

Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/media/i2c/adv748x/adv748x-csi2.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

--
2.44.0
  

Comments

Niklas Söderlund May 9, 2024, 10:42 p.m. UTC | #1
Hi Jacopo,

Thanks for your work.

On 2024-05-09 18:13:56 +0200, Jacopo Mondi wrote:
> The adv748x-csi2 driver configures the CSI-2 transmitter to
> automatically infer the image stream format from the connected
> frontend (HDMI or AFE).
> 
> Setting a new format on the subdevice hence does not actually control
> the CSI-2 output format, but it's only there for the purpose of
> pipeline validation.
> 
> However, there is currently no validation that the supplied media bus
> code is valid and supported by the device.
> 
> With the introduction of enum_mbus_codes a list of supported format is
> now available, use it to validate that the supplied format is correct
> and use the default UYVY8 one if that's not the case.
> 
> Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

With the reordering of patches to avoid breaking bisect talked about in 
patch 8/11 fixed.

Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>

> ---
>  drivers/media/i2c/adv748x/adv748x-csi2.c | 23 +++++++++++++++++++++++
>  1 file changed, 23 insertions(+)
> 
> diff --git a/drivers/media/i2c/adv748x/adv748x-csi2.c b/drivers/media/i2c/adv748x/adv748x-csi2.c
> index 29b18b6c8b0e..0cdb397d9e0a 100644
> --- a/drivers/media/i2c/adv748x/adv748x-csi2.c
> +++ b/drivers/media/i2c/adv748x/adv748x-csi2.c
> @@ -218,6 +218,22 @@ static int adv748x_csi2_get_format(struct v4l2_subdev *sd,
>  	return 0;
>  }
> 
> +static bool adv748x_csi2_is_fmt_supported(struct adv748x_csi2 *tx, u32 code)
> +{
> +	const unsigned int *codes = is_txa(tx) ?
> +				    adv748x_csi2_txa_fmts :
> +				    adv748x_csi2_txb_fmts;
> +	size_t num_fmts = is_txa(tx) ? ARRAY_SIZE(adv748x_csi2_txa_fmts)
> +				     : ARRAY_SIZE(adv748x_csi2_txb_fmts);
> +
> +	for (unsigned int i = 0; i < num_fmts; i++) {
> +		if (codes[i] == code)
> +			return true;
> +	}
> +
> +	return false;
> +}
> +
>  static int adv748x_csi2_set_format(struct v4l2_subdev *sd,
>  				   struct v4l2_subdev_state *sd_state,
>  				   struct v4l2_subdev_format *sdformat)
> @@ -227,6 +243,13 @@ static int adv748x_csi2_set_format(struct v4l2_subdev *sd,
>  	struct v4l2_mbus_framefmt *mbusformat;
>  	int ret = 0;
> 
> +	/*
> +	 * Make sure the format is supported, if not default it to
> +	 * UYVY8 as it's supported by both TXes.
> +	 */
> +	if (!adv748x_csi2_is_fmt_supported(tx, sdformat->format.code))
> +		sdformat->format.code = MEDIA_BUS_FMT_UYVY8_1X16;
> +
>  	mbusformat = adv748x_csi2_get_pad_format(sd, sd_state, sdformat->pad,
>  						 sdformat->which);
>  	if (!mbusformat)
> --
> 2.44.0
>
  

Patch

diff --git a/drivers/media/i2c/adv748x/adv748x-csi2.c b/drivers/media/i2c/adv748x/adv748x-csi2.c
index 29b18b6c8b0e..0cdb397d9e0a 100644
--- a/drivers/media/i2c/adv748x/adv748x-csi2.c
+++ b/drivers/media/i2c/adv748x/adv748x-csi2.c
@@ -218,6 +218,22 @@  static int adv748x_csi2_get_format(struct v4l2_subdev *sd,
 	return 0;
 }

+static bool adv748x_csi2_is_fmt_supported(struct adv748x_csi2 *tx, u32 code)
+{
+	const unsigned int *codes = is_txa(tx) ?
+				    adv748x_csi2_txa_fmts :
+				    adv748x_csi2_txb_fmts;
+	size_t num_fmts = is_txa(tx) ? ARRAY_SIZE(adv748x_csi2_txa_fmts)
+				     : ARRAY_SIZE(adv748x_csi2_txb_fmts);
+
+	for (unsigned int i = 0; i < num_fmts; i++) {
+		if (codes[i] == code)
+			return true;
+	}
+
+	return false;
+}
+
 static int adv748x_csi2_set_format(struct v4l2_subdev *sd,
 				   struct v4l2_subdev_state *sd_state,
 				   struct v4l2_subdev_format *sdformat)
@@ -227,6 +243,13 @@  static int adv748x_csi2_set_format(struct v4l2_subdev *sd,
 	struct v4l2_mbus_framefmt *mbusformat;
 	int ret = 0;

+	/*
+	 * Make sure the format is supported, if not default it to
+	 * UYVY8 as it's supported by both TXes.
+	 */
+	if (!adv748x_csi2_is_fmt_supported(tx, sdformat->format.code))
+		sdformat->format.code = MEDIA_BUS_FMT_UYVY8_1X16;
+
 	mbusformat = adv748x_csi2_get_pad_format(sd, sd_state, sdformat->pad,
 						 sdformat->which);
 	if (!mbusformat)