[v2,4/5] media: ov2680: Add hblank control
Commit Message
Add hblank control so that the sensor has all the mandatory
controls for libcamera.
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
Changes in v2:
- Add error checking to __v4l2_ctrl_modify_range() and
set read-only flag after checking hdl->error
---
drivers/media/i2c/ov2680.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
@@ -130,6 +130,7 @@ struct ov2680_ctrls {
struct v4l2_ctrl *link_freq;
struct v4l2_ctrl *pixel_rate;
struct v4l2_ctrl *vblank;
+ struct v4l2_ctrl *hblank;
};
struct ov2680_mode {
@@ -689,6 +690,12 @@ static int ov2680_set_fmt(struct v4l2_subdev *sd,
/* exposure range depends on vts which may have changed */
ret = ov2680_exposure_update_range(sensor);
+ if (ret)
+ goto unlock;
+
+ /* adjust hblank value for new width */
+ def = OV2680_PIXELS_PER_LINE - width;
+ ret = __v4l2_ctrl_modify_range(sensor->ctrls.hblank, def, def, 1, def);
unlock:
mutex_unlock(&sensor->lock);
@@ -993,6 +1000,10 @@ static int ov2680_v4l2_register(struct ov2680_dev *sensor)
ctrls->vblank = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_VBLANK,
OV2680_MIN_VBLANK, max, 1, def);
+ def = OV2680_PIXELS_PER_LINE - OV2680_DEFAULT_WIDTH;
+ ctrls->hblank = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_HBLANK,
+ def, def, 1, def);
+
if (hdl->error) {
ret = hdl->error;
goto cleanup_entity;
@@ -1001,6 +1012,7 @@ static int ov2680_v4l2_register(struct ov2680_dev *sensor)
ctrls->vflip->flags |= V4L2_CTRL_FLAG_MODIFY_LAYOUT;
ctrls->hflip->flags |= V4L2_CTRL_FLAG_MODIFY_LAYOUT;
ctrls->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY;
+ ctrls->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY;
sensor->sd.ctrl_handler = hdl;