@@ -309,16 +309,14 @@ static int ciintf_poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int open
/* read from attribute memory in reset/ready state to know when the CAM is ready */
if (budget_av->slot_status == SLOTSTATUS_RESET) {
result = ciintf_read_attribute_mem(ca, slot, 0);
- if (result == 0x1d) {
+ if (result == 0x1d)
budget_av->slot_status = SLOTSTATUS_READY;
- }
}
/* work out correct return code */
if (budget_av->slot_status != SLOTSTATUS_NONE) {
- if (budget_av->slot_status & SLOTSTATUS_READY) {
+ if (budget_av->slot_status & SLOTSTATUS_READY)
return DVB_CA_EN50221_POLL_CAM_PRESENT | DVB_CA_EN50221_POLL_CAM_READY;
- }
return DVB_CA_EN50221_POLL_CAM_PRESENT;
}
return 0;
@@ -452,8 +450,9 @@ static int saa7113_setinput(struct budget_av *budget_av, int input)
} else if (input == 0) {
i2c_writereg(&budget->i2c_adap, 0x4a, 0x02, 0xc0);
i2c_writereg(&budget->i2c_adap, 0x4a, 0x09, 0x00);
- } else
+ } else {
return -EINVAL;
+ }
budget_av->cur_input = input;
return 0;
@@ -1237,15 +1236,13 @@ static void frontend_init(struct budget_av *budget_av)
if (saa->pci->subsystem_vendor == 0x1894) {
fe = dvb_attach(stv0299_attach, &cinergy_1200s_1894_0010_config,
&budget_av->budget.i2c_adap);
- if (fe) {
+ if (fe)
dvb_attach(tua6100_attach, fe, 0x60, &budget_av->budget.i2c_adap);
- }
} else {
fe = dvb_attach(stv0299_attach, &typhoon_config,
&budget_av->budget.i2c_adap);
- if (fe) {
+ if (fe)
fe->ops.tuner_ops.set_params = philips_su1278_ty_ci_tuner_set_params;
- }
}
break;
@@ -1257,19 +1254,17 @@ static void frontend_init(struct budget_av *budget_av)
case SUBID_DVBS_EASYWATCH_2:
fe = dvb_attach(stv0299_attach, &philips_sd1878_config,
&budget_av->budget.i2c_adap);
- if (fe) {
+ if (fe)
dvb_attach(dvb_pll_attach, fe, 0x60,
&budget_av->budget.i2c_adap,
DVB_PLL_PHILIPS_SD1878_TDA8261);
- }
break;
case SUBID_DVBS_TYPHOON:
fe = dvb_attach(stv0299_attach, &typhoon_config,
&budget_av->budget.i2c_adap);
- if (fe) {
+ if (fe)
fe->ops.tuner_ops.set_params = philips_su1278_ty_ci_tuner_set_params;
- }
break;
case SUBID_DVBS2_KNC1:
case SUBID_DVBS2_KNC1_OEM:
@@ -1282,9 +1277,8 @@ static void frontend_init(struct budget_av *budget_av)
case SUBID_DVBS_CINERGY1200:
fe = dvb_attach(stv0299_attach, &cinergy_1200s_config,
&budget_av->budget.i2c_adap);
- if (fe) {
+ if (fe)
fe->ops.tuner_ops.set_params = philips_su1278_ty_ci_tuner_set_params;
- }
break;
case SUBID_DVBC_KNC1:
@@ -1300,9 +1294,8 @@ static void frontend_init(struct budget_av *budget_av)
fe = dvb_attach(tda10021_attach, &philips_cu1216_config_altaddress,
&budget_av->budget.i2c_adap,
read_pwm(budget_av));
- if (fe) {
+ if (fe)
fe->ops.tuner_ops.set_params = philips_cu1216_tuner_set_params;
- }
break;
case SUBID_DVBC_EASYWATCH_MK3:
@@ -1316,9 +1309,8 @@ static void frontend_init(struct budget_av *budget_av)
&philips_cu1216_tda10023_config,
&budget_av->budget.i2c_adap,
read_pwm(budget_av));
- if (fe) {
+ if (fe)
fe->ops.tuner_ops.set_params = philips_cu1216_tuner_set_params;
- }
break;
case SUBID_DVBT_EASYWATCH:
@@ -412,24 +412,21 @@ static int ciintf_poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int open
flags = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 1, 0);
if (flags & CICONTROL_CAMDETECT) {
// mark it as present if it wasn't before
- if (budget_ci->slot_status & SLOTSTATUS_NONE) {
+ if (budget_ci->slot_status & SLOTSTATUS_NONE)
budget_ci->slot_status = SLOTSTATUS_PRESENT;
- }
// during a RESET, we check if we can read from IO memory to see when CAM is ready
if (budget_ci->slot_status & SLOTSTATUS_RESET) {
- if (ciintf_read_attribute_mem(ca, slot, 0) == 0x1d) {
+ if (ciintf_read_attribute_mem(ca, slot, 0) == 0x1d)
budget_ci->slot_status = SLOTSTATUS_READY;
- }
}
} else {
budget_ci->slot_status = SLOTSTATUS_NONE;
}
if (budget_ci->slot_status != SLOTSTATUS_NONE) {
- if (budget_ci->slot_status & SLOTSTATUS_READY) {
+ if (budget_ci->slot_status & SLOTSTATUS_READY)
return DVB_CA_EN50221_POLL_CAM_PRESENT | DVB_CA_EN50221_POLL_CAM_READY;
- }
return DVB_CA_EN50221_POLL_CAM_PRESENT;
}
@@ -494,11 +491,10 @@ static int ciintf_init(struct budget_ci *budget_ci)
// Setup CI slot IRQ
if (budget_ci->ci_irq) {
tasklet_setup(&budget_ci->ciintf_irq_tasklet, ciintf_interrupt);
- if (budget_ci->slot_status != SLOTSTATUS_NONE) {
+ if (budget_ci->slot_status != SLOTSTATUS_NONE)
saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQLO);
- } else {
+ else
saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQHI);
- }
SAA7146_IER_ENABLE(saa, MASK_03);
}
@@ -857,9 +853,9 @@ static int dvbc_philips_tdm1316l_tuner_set_params(struct dvb_frontend *fe)
// determine charge pump
tuner_frequency = p->frequency + 36125000;
- if (tuner_frequency < 87000000)
+ if (tuner_frequency < 87000000) {
return -EINVAL;
- else if (tuner_frequency < 130000000) {
+ } else if (tuner_frequency < 130000000) {
cp = 3;
band = 1;
} else if (tuner_frequency < 160000000) {
@@ -886,8 +882,9 @@ static int dvbc_philips_tdm1316l_tuner_set_params(struct dvb_frontend *fe)
} else if (tuner_frequency < 895000000) {
cp = 7;
band = 4;
- } else
+ } else {
return -EINVAL;
+ }
// assume PLL filter should always be 8MHz for the moment.
filter = 1;
@@ -100,9 +100,9 @@ static int SendDiSEqCMsg(struct budget *budget, int len, u8 *msg, unsigned long
mdelay(16);
if (burst != -1) {
- if (burst)
+ if (burst) {
DiseqcSendByte(budget, 0xff);
- else {
+ } else {
saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI);
mdelay(12);
udelay(500);
@@ -229,8 +229,7 @@ static int alps_bsrv2_tuner_set_params(struct dvb_frontend *fe)
return 0;
}
-static struct ves1x93_config alps_bsrv2_config =
-{
+static struct ves1x93_config alps_bsrv2_config = {
.demod_address = 0x08,
.xin = 90100000UL,
.invert_pwm = 0,
@@ -786,9 +785,8 @@ static int budget_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_d
int err;
budget = kmalloc(sizeof(struct budget), GFP_KERNEL);
- if (NULL == budget) {
+ if (NULL == budget)
return -ENOMEM;
- }
dprintk(2, "dev:%p, info:%p, budget:%p\n", dev, info, budget);