[v4,1/2] media: dt-bindings: media: Add bindings for IMX283
Commit Message
- Add dt-bindings documentation for Sony IMX283 sensor driver
- Add MAINTAINERS entry for Sony IMX283 binding documentation
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
---
.../devicetree/bindings/media/i2c/sony,imx283.yaml | 107 +++++++++++++++++++++
MAINTAINERS | 8 ++
2 files changed, 115 insertions(+)
new file mode 100644
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2024 Ideas on Board Oy
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/sony,imx283.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony IMX283 Sensor
+
+maintainers:
+ - Kieran Bingham <kieran.bingham@ideasonboard.com>
+ - Umang Jain <umang.jain@ideasonboard.com>
+
+description:
+ IMX283 sensor is a Sony CMOS active pixel digital image sensor with an active
+ array size of 5472H x 3648V. It is programmable through I2C interface. The
+ I2C client address is fixed to 0x1a as per sensor data sheet. Image data is
+ sent through MIPI CSI-2.
+
+properties:
+ compatible:
+ const: sony,imx283
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ description: Clock frequency from 6 to 24 MHz.
+ maxItems: 1
+
+ vadd-supply:
+ description: Analog power supply (2.9V)
+
+ vdd1-supply:
+ description: Interface power supply (1.8V)
+
+ vdd2-supply:
+ description: Digital power supply (1.2V)
+
+ reset-gpios:
+ description: Sensor reset (XCLR) GPIO
+ maxItems: 1
+
+ port:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ additionalProperties: false
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ data-lanes:
+ anyOf:
+ - items:
+ - const: 1
+ - const: 2
+ - const: 3
+ - const: 4
+
+ link-frequencies: true
+
+ required:
+ - data-lanes
+ - link-frequencies
+
+ required:
+ - endpoint
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ camera@1a {
+ compatible = "sony,imx283";
+ reg = <0x1a>;
+ clocks = <&imx283_clk>;
+
+ assigned-clocks = <&imx283_clk>;
+ assigned-clock-parents = <&imx283_clk_parent>;
+ assigned-clock-rates = <12000000>;
+
+ vadd-supply = <&camera_vadd_2v9>;
+ vdd1-supply = <&camera_vdd1_1v8>;
+ vdd2-supply = <&camera_vdd2_1v2>;
+
+ port {
+ imx283: endpoint {
+ remote-endpoint = <&cam>;
+ data-lanes = <1 2 3 4>;
+ link-frequencies = /bits/ 64 <360000000>;
+ };
+ };
+ };
+ };
+...
@@ -20367,6 +20367,14 @@ T: git git://linuxtv.org/media_tree.git
F: Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml
F: drivers/media/i2c/imx274.c
+SONY IMX283 SENSOR DRIVER
+M: Kieran Bingham <kieran.bingham@ideasonboard.com>
+M: Umang Jain <umang.jain@ideasonboard.com>
+L: linux-media@vger.kernel.org
+S: Maintained
+T: git git://linuxtv.org/media_tree.git
+F: Documentation/devicetree/bindings/media/i2c/sony,imx283.yaml
+
SONY IMX290 SENSOR DRIVER
M: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
L: linux-media@vger.kernel.org