[2/5] media: i2c: imx219: Switch from open to init_cfg
Commit Message
From: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Use the init_cfg pad level operation instead of the internal subdev
open operation to set default formats on the pads.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
---
drivers/media/i2c/imx219.c | 58 +++++++++++++++++---------------------
1 file changed, 26 insertions(+), 32 deletions(-)
Comments
Hi Jacopo
Thanks for the patch.
On Tue, 4 Jul 2023 at 11:41, Jacopo Mondi <jacopo.mondi@ideasonboard.com> wrote:
>
> From: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
>
> Use the init_cfg pad level operation instead of the internal subdev
> open operation to set default formats on the pads.
>
> Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
> Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
> ---
> drivers/media/i2c/imx219.c | 58 +++++++++++++++++---------------------
> 1 file changed, 26 insertions(+), 32 deletions(-)
>
> diff --git a/drivers/media/i2c/imx219.c b/drivers/media/i2c/imx219.c
> index 998a673a4290..191cb4a427cc 100644
> --- a/drivers/media/i2c/imx219.c
> +++ b/drivers/media/i2c/imx219.c
> @@ -608,34 +608,6 @@ static void imx219_set_default_format(struct imx219 *imx219)
> fmt->field = V4L2_FIELD_NONE;
> }
>
> -static int imx219_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
> -{
> - struct imx219 *imx219 = to_imx219(sd);
> - struct v4l2_mbus_framefmt *try_fmt =
> - v4l2_subdev_get_try_format(sd, fh->state, 0);
> - struct v4l2_rect *try_crop;
> -
> - mutex_lock(&imx219->mutex);
> -
> - /* Initialize try_fmt */
> - try_fmt->width = supported_modes[0].width;
> - try_fmt->height = supported_modes[0].height;
> - try_fmt->code = imx219_get_format_code(imx219,
> - MEDIA_BUS_FMT_SRGGB10_1X10);
> - try_fmt->field = V4L2_FIELD_NONE;
> -
> - /* Initialize try_crop rectangle. */
> - try_crop = v4l2_subdev_get_try_crop(sd, fh->state, 0);
> - try_crop->top = IMX219_PIXEL_ARRAY_TOP;
> - try_crop->left = IMX219_PIXEL_ARRAY_LEFT;
> - try_crop->width = IMX219_PIXEL_ARRAY_WIDTH;
> - try_crop->height = IMX219_PIXEL_ARRAY_HEIGHT;
> -
> - mutex_unlock(&imx219->mutex);
> -
> - return 0;
> -}
> -
> static int imx219_set_ctrl(struct v4l2_ctrl *ctrl)
> {
> struct imx219 *imx219 =
> @@ -725,6 +697,31 @@ static const struct v4l2_ctrl_ops imx219_ctrl_ops = {
> .s_ctrl = imx219_set_ctrl,
> };
>
> +static int imx219_init_cfg(struct v4l2_subdev *sd,
> + struct v4l2_subdev_state *state)
> +{
> + struct imx219 *imx219 = to_imx219(sd);
> + struct v4l2_mbus_framefmt *format;
> + struct v4l2_rect *try_crop;
> +
> + /* Initialize try_fmt */
> + format = v4l2_subdev_get_try_format(sd, state, 0);
> + format->width = supported_modes[0].width;
> + format->height = supported_modes[0].height;
> + format->code = imx219_get_format_code(imx219,
> + MEDIA_BUS_FMT_SRGGB10_1X10);
> + format->field = V4L2_FIELD_NONE;
> +
> + /* Initialize try_crop rectangle. */
> + try_crop = v4l2_subdev_get_try_crop(sd, state, 0);
> + try_crop->top = IMX219_PIXEL_ARRAY_TOP;
> + try_crop->left = IMX219_PIXEL_ARRAY_LEFT;
> + try_crop->width = IMX219_PIXEL_ARRAY_WIDTH;
> + try_crop->height = IMX219_PIXEL_ARRAY_HEIGHT;
> +
> + return 0;
> +}
> +
> static int imx219_enum_mbus_code(struct v4l2_subdev *sd,
> struct v4l2_subdev_state *sd_state,
> struct v4l2_subdev_mbus_code_enum *code)
> @@ -1235,6 +1232,7 @@ static const struct v4l2_subdev_video_ops imx219_video_ops = {
> };
>
> static const struct v4l2_subdev_pad_ops imx219_pad_ops = {
> + .init_cfg = imx219_init_cfg,
> .enum_mbus_code = imx219_enum_mbus_code,
> .get_fmt = imx219_get_pad_format,
> .set_fmt = imx219_set_pad_format,
> @@ -1248,9 +1246,6 @@ static const struct v4l2_subdev_ops imx219_subdev_ops = {
> .pad = &imx219_pad_ops,
> };
>
> -static const struct v4l2_subdev_internal_ops imx219_internal_ops = {
> - .open = imx219_open,
> -};
>
> static unsigned long imx219_get_pixel_rate(struct imx219 *imx219)
> {
> @@ -1509,7 +1504,6 @@ static int imx219_probe(struct i2c_client *client)
> goto error_power_off;
>
> /* Initialize subdev */
> - imx219->sd.internal_ops = &imx219_internal_ops;
> imx219->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE |
> V4L2_SUBDEV_FL_HAS_EVENTS;
> imx219->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
> --
> 2.40.1
>
Hi Jacopo,
Thank you for the patch.
On Tue, Jul 04, 2023 at 12:40:54PM +0200, Jacopo Mondi wrote:
> From: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
>
> Use the init_cfg pad level operation instead of the internal subdev
> open operation to set default formats on the pads.
>
> Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
> Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
> ---
> drivers/media/i2c/imx219.c | 58 +++++++++++++++++---------------------
> 1 file changed, 26 insertions(+), 32 deletions(-)
>
> diff --git a/drivers/media/i2c/imx219.c b/drivers/media/i2c/imx219.c
> index 998a673a4290..191cb4a427cc 100644
> --- a/drivers/media/i2c/imx219.c
> +++ b/drivers/media/i2c/imx219.c
> @@ -608,34 +608,6 @@ static void imx219_set_default_format(struct imx219 *imx219)
> fmt->field = V4L2_FIELD_NONE;
> }
>
> -static int imx219_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
> -{
> - struct imx219 *imx219 = to_imx219(sd);
> - struct v4l2_mbus_framefmt *try_fmt =
> - v4l2_subdev_get_try_format(sd, fh->state, 0);
> - struct v4l2_rect *try_crop;
> -
> - mutex_lock(&imx219->mutex);
> -
> - /* Initialize try_fmt */
> - try_fmt->width = supported_modes[0].width;
> - try_fmt->height = supported_modes[0].height;
> - try_fmt->code = imx219_get_format_code(imx219,
> - MEDIA_BUS_FMT_SRGGB10_1X10);
> - try_fmt->field = V4L2_FIELD_NONE;
> -
> - /* Initialize try_crop rectangle. */
> - try_crop = v4l2_subdev_get_try_crop(sd, fh->state, 0);
> - try_crop->top = IMX219_PIXEL_ARRAY_TOP;
> - try_crop->left = IMX219_PIXEL_ARRAY_LEFT;
> - try_crop->width = IMX219_PIXEL_ARRAY_WIDTH;
> - try_crop->height = IMX219_PIXEL_ARRAY_HEIGHT;
> -
> - mutex_unlock(&imx219->mutex);
> -
> - return 0;
> -}
> -
> static int imx219_set_ctrl(struct v4l2_ctrl *ctrl)
> {
> struct imx219 *imx219 =
> @@ -725,6 +697,31 @@ static const struct v4l2_ctrl_ops imx219_ctrl_ops = {
> .s_ctrl = imx219_set_ctrl,
> };
>
> +static int imx219_init_cfg(struct v4l2_subdev *sd,
> + struct v4l2_subdev_state *state)
> +{
> + struct imx219 *imx219 = to_imx219(sd);
> + struct v4l2_mbus_framefmt *format;
> + struct v4l2_rect *try_crop;
> +
> + /* Initialize try_fmt */
> + format = v4l2_subdev_get_try_format(sd, state, 0);
This should be v4l2_subdev_get_pad_format(). The two functions are
identical, but v4l2_subdev_get_try_format() implies it access formats in
the try state only, while .init_cfg() will be used for the active state
too later in this series. The comment should also be updated, or just
dropped.
> + format->width = supported_modes[0].width;
> + format->height = supported_modes[0].height;
> + format->code = imx219_get_format_code(imx219,
> + MEDIA_BUS_FMT_SRGGB10_1X10);
> + format->field = V4L2_FIELD_NONE;
> +
> + /* Initialize try_crop rectangle. */
> + try_crop = v4l2_subdev_get_try_crop(sd, state, 0);
Same here, an the variable should be renamed to crop.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> + try_crop->top = IMX219_PIXEL_ARRAY_TOP;
> + try_crop->left = IMX219_PIXEL_ARRAY_LEFT;
> + try_crop->width = IMX219_PIXEL_ARRAY_WIDTH;
> + try_crop->height = IMX219_PIXEL_ARRAY_HEIGHT;
> +
> + return 0;
> +}
> +
> static int imx219_enum_mbus_code(struct v4l2_subdev *sd,
> struct v4l2_subdev_state *sd_state,
> struct v4l2_subdev_mbus_code_enum *code)
> @@ -1235,6 +1232,7 @@ static const struct v4l2_subdev_video_ops imx219_video_ops = {
> };
>
> static const struct v4l2_subdev_pad_ops imx219_pad_ops = {
> + .init_cfg = imx219_init_cfg,
> .enum_mbus_code = imx219_enum_mbus_code,
> .get_fmt = imx219_get_pad_format,
> .set_fmt = imx219_set_pad_format,
> @@ -1248,9 +1246,6 @@ static const struct v4l2_subdev_ops imx219_subdev_ops = {
> .pad = &imx219_pad_ops,
> };
>
> -static const struct v4l2_subdev_internal_ops imx219_internal_ops = {
> - .open = imx219_open,
> -};
>
> static unsigned long imx219_get_pixel_rate(struct imx219 *imx219)
> {
> @@ -1509,7 +1504,6 @@ static int imx219_probe(struct i2c_client *client)
> goto error_power_off;
>
> /* Initialize subdev */
> - imx219->sd.internal_ops = &imx219_internal_ops;
> imx219->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE |
> V4L2_SUBDEV_FL_HAS_EVENTS;
> imx219->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
@@ -608,34 +608,6 @@ static void imx219_set_default_format(struct imx219 *imx219)
fmt->field = V4L2_FIELD_NONE;
}
-static int imx219_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
-{
- struct imx219 *imx219 = to_imx219(sd);
- struct v4l2_mbus_framefmt *try_fmt =
- v4l2_subdev_get_try_format(sd, fh->state, 0);
- struct v4l2_rect *try_crop;
-
- mutex_lock(&imx219->mutex);
-
- /* Initialize try_fmt */
- try_fmt->width = supported_modes[0].width;
- try_fmt->height = supported_modes[0].height;
- try_fmt->code = imx219_get_format_code(imx219,
- MEDIA_BUS_FMT_SRGGB10_1X10);
- try_fmt->field = V4L2_FIELD_NONE;
-
- /* Initialize try_crop rectangle. */
- try_crop = v4l2_subdev_get_try_crop(sd, fh->state, 0);
- try_crop->top = IMX219_PIXEL_ARRAY_TOP;
- try_crop->left = IMX219_PIXEL_ARRAY_LEFT;
- try_crop->width = IMX219_PIXEL_ARRAY_WIDTH;
- try_crop->height = IMX219_PIXEL_ARRAY_HEIGHT;
-
- mutex_unlock(&imx219->mutex);
-
- return 0;
-}
-
static int imx219_set_ctrl(struct v4l2_ctrl *ctrl)
{
struct imx219 *imx219 =
@@ -725,6 +697,31 @@ static const struct v4l2_ctrl_ops imx219_ctrl_ops = {
.s_ctrl = imx219_set_ctrl,
};
+static int imx219_init_cfg(struct v4l2_subdev *sd,
+ struct v4l2_subdev_state *state)
+{
+ struct imx219 *imx219 = to_imx219(sd);
+ struct v4l2_mbus_framefmt *format;
+ struct v4l2_rect *try_crop;
+
+ /* Initialize try_fmt */
+ format = v4l2_subdev_get_try_format(sd, state, 0);
+ format->width = supported_modes[0].width;
+ format->height = supported_modes[0].height;
+ format->code = imx219_get_format_code(imx219,
+ MEDIA_BUS_FMT_SRGGB10_1X10);
+ format->field = V4L2_FIELD_NONE;
+
+ /* Initialize try_crop rectangle. */
+ try_crop = v4l2_subdev_get_try_crop(sd, state, 0);
+ try_crop->top = IMX219_PIXEL_ARRAY_TOP;
+ try_crop->left = IMX219_PIXEL_ARRAY_LEFT;
+ try_crop->width = IMX219_PIXEL_ARRAY_WIDTH;
+ try_crop->height = IMX219_PIXEL_ARRAY_HEIGHT;
+
+ return 0;
+}
+
static int imx219_enum_mbus_code(struct v4l2_subdev *sd,
struct v4l2_subdev_state *sd_state,
struct v4l2_subdev_mbus_code_enum *code)
@@ -1235,6 +1232,7 @@ static const struct v4l2_subdev_video_ops imx219_video_ops = {
};
static const struct v4l2_subdev_pad_ops imx219_pad_ops = {
+ .init_cfg = imx219_init_cfg,
.enum_mbus_code = imx219_enum_mbus_code,
.get_fmt = imx219_get_pad_format,
.set_fmt = imx219_set_pad_format,
@@ -1248,9 +1246,6 @@ static const struct v4l2_subdev_ops imx219_subdev_ops = {
.pad = &imx219_pad_ops,
};
-static const struct v4l2_subdev_internal_ops imx219_internal_ops = {
- .open = imx219_open,
-};
static unsigned long imx219_get_pixel_rate(struct imx219 *imx219)
{
@@ -1509,7 +1504,6 @@ static int imx219_probe(struct i2c_client *client)
goto error_power_off;
/* Initialize subdev */
- imx219->sd.internal_ops = &imx219_internal_ops;
imx219->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE |
V4L2_SUBDEV_FL_HAS_EVENTS;
imx219->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;