[v4,2/3] media: i2c: imx412: Add bulk regulator support
Commit Message
Depending on the platform we may need to enable and disable three separate
regulators for the imx412.
- DOVDD
Digital I/O power
- AVDD
Analog power
- DVDD
Digital core power
The addition of these regulators shouldn't affect existing users using
fixed-on/firmware-controlled regulators.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
drivers/media/i2c/imx412.c | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
Comments
Hello Bryan,
On Thu, Apr 14, 2022 at 03:11:07PM +0100, Bryan O'Donoghue wrote:
> Depending on the platform we may need to enable and disable three separate
> regulators for the imx412.
>
> - DOVDD
> Digital I/O power
>
> - AVDD
> Analog power
>
> - DVDD
> Digital core power
>
> The addition of these regulators shouldn't affect existing users using
> fixed-on/firmware-controlled regulators.
>
> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
> ---
> drivers/media/i2c/imx412.c | 28 ++++++++++++++++++++++++++++
> 1 file changed, 28 insertions(+)
>
> diff --git a/drivers/media/i2c/imx412.c b/drivers/media/i2c/imx412.c
> index be3f6ea55559..6d0746d6c634 100644
> --- a/drivers/media/i2c/imx412.c
> +++ b/drivers/media/i2c/imx412.c
> @@ -11,6 +11,7 @@
> #include <linux/i2c.h>
> #include <linux/module.h>
> #include <linux/pm_runtime.h>
> +#include <linux/regulator/consumer.h>
>
> #include <media/v4l2-ctrls.h>
> #include <media/v4l2-fwnode.h>
> @@ -101,6 +102,12 @@ struct imx412_mode {
> struct imx412_reg_list reg_list;
> };
>
> +static const char * const imx412_supply_names[] = {
> + "dovdd", /* Digital I/O power */
> + "avdd", /* Analog power */
> + "dvdd", /* Digital core power */
> +};
> +
> /**
> * struct imx412 - imx412 sensor device structure
> * @dev: Pointer to generic device
> @@ -128,6 +135,8 @@ struct imx412 {
> struct media_pad pad;
> struct gpio_desc *reset_gpio;
y> struct clk *inclk;
> + struct regulator_bulk_data supplies[ARRAY_SIZE(imx412_supply_names)];
> + unsigned int num_supplies;
> struct v4l2_ctrl_handler ctrl_handler;
> struct v4l2_ctrl *link_freq_ctrl;
> struct v4l2_ctrl *pclk_ctrl;
> @@ -946,6 +955,16 @@ static int imx412_parse_hw_config(struct imx412 *imx412)
> return -EINVAL;
> }
>
> + /* Get optional DT defined regulators */
> + imx412->num_supplies = ARRAY_SIZE(imx412_supply_names);
Just one drive-by comment: is num_supplies needed ?
It seems to be initialized here and never changed. I think you can use
ARRAY_SIZE(imx412_supply_names). Or since the macro is also used to
initialize the 'supplies' array, define a IMX412_NUM_SUPPLIES or
similar.
Thanks
j
> + for (i = 0; i < imx412->num_supplies; i++)
> + imx412->supplies[i].supply = imx412_supply_names[i];
> +
> + ret = devm_regulator_bulk_get(imx412->dev, imx412->num_supplies,
> + imx412->supplies);
> + if (ret)
> + return ret;
> +
> ep = fwnode_graph_get_next_endpoint(fwnode, NULL);
> if (!ep)
> return -ENXIO;
> @@ -1011,6 +1030,12 @@ static int imx412_power_on(struct device *dev)
> struct imx412 *imx412 = to_imx412(sd);
> int ret;
>
> + ret = regulator_bulk_enable(imx412->num_supplies, imx412->supplies);
> + if (ret < 0) {
> + dev_err(dev, "failed to enable regulators\n");
> + return ret;
> + }
> +
> gpiod_set_value_cansleep(imx412->reset_gpio, 1);
>
> ret = clk_prepare_enable(imx412->inclk);
> @@ -1025,6 +1050,7 @@ static int imx412_power_on(struct device *dev)
>
> error_reset:
> gpiod_set_value_cansleep(imx412->reset_gpio, 0);
> + regulator_bulk_disable(imx412->num_supplies, imx412->supplies);
>
> return ret;
> }
> @@ -1044,6 +1070,8 @@ static int imx412_power_off(struct device *dev)
>
> clk_disable_unprepare(imx412->inclk);
>
> + regulator_bulk_disable(imx412->num_supplies, imx412->supplies);
> +
> return 0;
> }
>
> --
> 2.35.1
>
@@ -11,6 +11,7 @@
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/pm_runtime.h>
+#include <linux/regulator/consumer.h>
#include <media/v4l2-ctrls.h>
#include <media/v4l2-fwnode.h>
@@ -101,6 +102,12 @@ struct imx412_mode {
struct imx412_reg_list reg_list;
};
+static const char * const imx412_supply_names[] = {
+ "dovdd", /* Digital I/O power */
+ "avdd", /* Analog power */
+ "dvdd", /* Digital core power */
+};
+
/**
* struct imx412 - imx412 sensor device structure
* @dev: Pointer to generic device
@@ -128,6 +135,8 @@ struct imx412 {
struct media_pad pad;
struct gpio_desc *reset_gpio;
struct clk *inclk;
+ struct regulator_bulk_data supplies[ARRAY_SIZE(imx412_supply_names)];
+ unsigned int num_supplies;
struct v4l2_ctrl_handler ctrl_handler;
struct v4l2_ctrl *link_freq_ctrl;
struct v4l2_ctrl *pclk_ctrl;
@@ -946,6 +955,16 @@ static int imx412_parse_hw_config(struct imx412 *imx412)
return -EINVAL;
}
+ /* Get optional DT defined regulators */
+ imx412->num_supplies = ARRAY_SIZE(imx412_supply_names);
+ for (i = 0; i < imx412->num_supplies; i++)
+ imx412->supplies[i].supply = imx412_supply_names[i];
+
+ ret = devm_regulator_bulk_get(imx412->dev, imx412->num_supplies,
+ imx412->supplies);
+ if (ret)
+ return ret;
+
ep = fwnode_graph_get_next_endpoint(fwnode, NULL);
if (!ep)
return -ENXIO;
@@ -1011,6 +1030,12 @@ static int imx412_power_on(struct device *dev)
struct imx412 *imx412 = to_imx412(sd);
int ret;
+ ret = regulator_bulk_enable(imx412->num_supplies, imx412->supplies);
+ if (ret < 0) {
+ dev_err(dev, "failed to enable regulators\n");
+ return ret;
+ }
+
gpiod_set_value_cansleep(imx412->reset_gpio, 1);
ret = clk_prepare_enable(imx412->inclk);
@@ -1025,6 +1050,7 @@ static int imx412_power_on(struct device *dev)
error_reset:
gpiod_set_value_cansleep(imx412->reset_gpio, 0);
+ regulator_bulk_disable(imx412->num_supplies, imx412->supplies);
return ret;
}
@@ -1044,6 +1070,8 @@ static int imx412_power_off(struct device *dev)
clk_disable_unprepare(imx412->inclk);
+ regulator_bulk_disable(imx412->num_supplies, imx412->supplies);
+
return 0;
}