diff mbox series

[1/8] media: mceusb: fix control-message timeouts

Message ID 20211025121641.6759-2-johan@kernel.org (mailing list archive)
State Accepted, archived
Delegated to: Hans Verkuil
Headers
Series media: fix control-message timeouts |

Commit Message

Johan Hovold Oct. 25, 2021, 12:16 p.m. UTC 
  USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.

Fixes: 66e89522aff7 ("V4L/DVB: IR: add mceusb IR receiver driver")
Cc: stable@vger.kernel.org      # 2.6.36
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/media/rc/mceusb.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c
index e03dd1f0144f..7a8a889d54a2 100644
--- a/drivers/media/rc/mceusb.c
+++ b/drivers/media/rc/mceusb.c
@@ -1429,7 +1429,7 @@  static void mceusb_gen1_init(struct mceusb_dev *ir)
 	 */
 	ret = usb_control_msg(ir->usbdev, usb_rcvctrlpipe(ir->usbdev, 0),
 			      USB_REQ_SET_ADDRESS, USB_TYPE_VENDOR, 0, 0,
-			      data, USB_CTRL_MSG_SZ, HZ * 3);
+			      data, USB_CTRL_MSG_SZ, 3000);
 	dev_dbg(dev, "set address - ret = %d", ret);
 	dev_dbg(dev, "set address - data[0] = %d, data[1] = %d",
 						data[0], data[1]);
@@ -1437,20 +1437,20 @@  static void mceusb_gen1_init(struct mceusb_dev *ir)
 	/* set feature: bit rate 38400 bps */
 	ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0),
 			      USB_REQ_SET_FEATURE, USB_TYPE_VENDOR,
-			      0xc04e, 0x0000, NULL, 0, HZ * 3);
+			      0xc04e, 0x0000, NULL, 0, 3000);
 
 	dev_dbg(dev, "set feature - ret = %d", ret);
 
 	/* bRequest 4: set char length to 8 bits */
 	ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0),
 			      4, USB_TYPE_VENDOR,
-			      0x0808, 0x0000, NULL, 0, HZ * 3);
+			      0x0808, 0x0000, NULL, 0, 3000);
 	dev_dbg(dev, "set char length - retB = %d", ret);
 
 	/* bRequest 2: set handshaking to use DTR/DSR */
 	ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0),
 			      2, USB_TYPE_VENDOR,
-			      0x0000, 0x0100, NULL, 0, HZ * 3);
+			      0x0000, 0x0100, NULL, 0, 3000);
 	dev_dbg(dev, "set handshake  - retC = %d", ret);
 
 	/* device resume */