[2/2] media: i2c: adv7180: fix adv7280 BT.656-4 compatibility
Commit Message
From: Matthew Michilot <matthew.michilot@gmail.com>
Captured video would be out of sync when using the adv7280 with
the BT.656-4 protocol. Certain registers (0x04, 0x31, 0xE6) had to
be configured properly to ensure BT.656-4 compatibility.
An error in the adv7280 reference manual suggested that EAV/SAV mode
was enabled by default, however upon inspecting register 0x31, it was
determined to be disabled by default.
Signed-off-by: Matthew Michilot <matthew.michilot@gmail.com>
Reviewed-by: Tim Harvey <tharvey@gateworks.com>
[fabio: Introduce "adv,adv7182-force-bt656-4"]
Signed-off-by: Fabio Estevam <festevam@gmail.com>
---
Changes since v1:
- Only force BT656-4 when the DT property is present.
drivers/media/i2c/adv7180.c | 30 ++++++++++++++++++++++++++----
1 file changed, 26 insertions(+), 4 deletions(-)
@@ -94,6 +94,7 @@
#define ADV7180_REG_SHAP_FILTER_CTL_1 0x0017
#define ADV7180_REG_CTRL_2 0x001d
#define ADV7180_REG_VSYNC_FIELD_CTL_1 0x0031
+#define ADV7180_VSYNC_FIELD_CTL_1_NEWAV 0x12
#define ADV7180_REG_MANUAL_WIN_CTL_1 0x003d
#define ADV7180_REG_MANUAL_WIN_CTL_2 0x003e
#define ADV7180_REG_MANUAL_WIN_CTL_3 0x003f
@@ -216,6 +217,7 @@ struct adv7180_state {
struct i2c_client *vpp_client;
const struct adv7180_chip_info *chip_info;
enum v4l2_field field;
+ bool force_bt656_4;
};
#define to_adv7180_sd(_ctrl) (&container_of(_ctrl->handler, \
struct adv7180_state, \
@@ -963,10 +965,26 @@ static int adv7182_init(struct adv7180_state *state)
adv7180_write(state, ADV7180_REG_EXTENDED_OUTPUT_CONTROL, 0x57);
adv7180_write(state, ADV7180_REG_CTRL_2, 0xc0);
} else {
- if (state->chip_info->flags & ADV7180_FLAG_V2)
- adv7180_write(state,
- ADV7180_REG_EXTENDED_OUTPUT_CONTROL,
- 0x17);
+ if (state->chip_info->flags & ADV7180_FLAG_V2) {
+ if (state->force_bt656_4) {
+ /* ITU-R BT.656-4 compatible */
+ adv7180_write(state,
+ ADV7180_REG_EXTENDED_OUTPUT_CONTROL,
+ ADV7180_EXTENDED_OUTPUT_CONTROL_NTSCDIS);
+ /* Manually set NEWAVMODE */
+ adv7180_write(state,
+ ADV7180_REG_VSYNC_FIELD_CTL_1,
+ ADV7180_VSYNC_FIELD_CTL_1_NEWAV);
+ /* Manually set V bit end position in NTSC mode */
+ adv7180_write(state,
+ ADV7180_REG_NTSC_V_BIT_END,
+ ADV7180_NTSC_V_BIT_END_MANUAL_NVEND);
+ } else {
+ adv7180_write(state,
+ ADV7180_REG_EXTENDED_OUTPUT_CONTROL,
+ 0x17);
+ }
+ }
else
adv7180_write(state,
ADV7180_REG_EXTENDED_OUTPUT_CONTROL,
@@ -1314,6 +1332,7 @@ static int init_device(struct adv7180_state *state)
static int adv7180_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
+ struct device_node *np = client->dev.of_node;
struct adv7180_state *state;
struct v4l2_subdev *sd;
int ret;
@@ -1338,6 +1357,9 @@ static int adv7180_probe(struct i2c_client *client,
return ret;
}
+ if (of_property_read_bool(np, "adv,adv7182-force-bt656-4"))
+ state->force_bt656_4 = true;
+
if (state->chip_info->flags & ADV7180_FLAG_MIPI_CSI2) {
state->csi_client = i2c_new_dummy_device(client->adapter,
ADV7180_DEFAULT_CSI_I2C_ADDR);