[v2,1/1] video: initial support for ADV7180
Commit Message
On Tue, 11 Aug 2009 16:40:24 +0200
Richard R__jfors <richard.rojfors@mocean-labs.com> wrote:
> This is an initial driver for Analog Devices ADV7180 Video Decoder.
>
> So far it only supports setting the chip in autodetect mode and query
> the detected standard.
>
> Signed-off-by: Richard R__jfors <richard.rojfors.ext@mocean-labs.com>
> ---
> diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
> index 84b6fc1..ac9f636 100644
> --- a/drivers/media/video/Kconfig
> +++ b/drivers/media/video/Kconfig
> @@ -265,6 +265,15 @@ config VIDEO_SAA6588
>
> comment "Video decoders"
>
> +config VIDEO_ADV7180
> + tristate "Analog Devices ADV7180 decoder"
> + depends on VIDEO_V4L2 && I2C
> + ---help---
> + Support for the Analog Devices ADV7180 video decoder.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called adv7180.
> +
> config VIDEO_BT819
> tristate "BT819A VideoStream decoder"
> depends on VIDEO_V4L2 && I2C
> diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
> index 9f2e321..aac0884 100644
> --- a/drivers/media/video/Makefile
> +++ b/drivers/media/video/Makefile
> @@ -45,6 +45,7 @@ obj-$(CONFIG_VIDEO_SAA7185) += saa7185.o
> obj-$(CONFIG_VIDEO_SAA7191) += saa7191.o
> obj-$(CONFIG_VIDEO_ADV7170) += adv7170.o
> obj-$(CONFIG_VIDEO_ADV7175) += adv7175.o
> +obj-$(CONFIG_VIDEO_ADV7180) += adv7180.o
> obj-$(CONFIG_VIDEO_ADV7343) += adv7343.o
> obj-$(CONFIG_VIDEO_VPX3220) += vpx3220.o
> obj-$(CONFIG_VIDEO_BT819) += bt819.o
Something made a mess of that hunk.
> diff --git a/drivers/media/video/adv7180.c b/drivers/media/video/adv7180.c
> new file mode 100644
> index 0000000..6607321
> --- /dev/null
> +++ b/drivers/media/video/adv7180.c
> @@ -0,0 +1,202 @@
> +/*
> + * adv7180.c Analog Devices ADV7180 video decoder driver
> + * Copyright (c) 2009 Intel Corporation
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/init.h>
> +#include <linux/errno.h>
> +#include <linux/kernel.h>
> +#include <linux/interrupt.h>
> +#include <linux/i2c.h>
> +#include <linux/i2c-id.h>
> +#include <media/v4l2-ioctl.h>
> +#include <linux/videodev2.h>
> +#include <media/v4l2-device.h>
> +#include <media/v4l2-chip-ident.h>
> +
> +#define DRIVER_NAME "adv7180"
> +
> +#define ADV7180_INPUT_CONTROL_REG 0x00
> +#define ADV7180_INPUT_CONTROL_PAL_BG_NTSC_J_SECAM 0x00
> +#define ADV7180_AUTODETECT_ENABLE_REG 0x07
> +#define ADV7180_AUTODETECT_DEFAULT 0x7f
> +
> +
> +#define ADV7180_STATUS1_REG 0x10
> +#define ADV7180_STATUS1_AUTOD_MASK 0x70
> +#define ADV7180_STATUS1_AUTOD_NTSM_M_J 0x00
> +#define ADV7180_STATUS1_AUTOD_NTSC_4_43 0x10
> +#define ADV7180_STATUS1_AUTOD_PAL_M 0x20
> +#define ADV7180_STATUS1_AUTOD_PAL_60 0x30
> +#define ADV7180_STATUS1_AUTOD_PAL_B_G 0x40
> +#define ADV7180_STATUS1_AUTOD_SECAM 0x50
> +#define ADV7180_STATUS1_AUTOD_PAL_COMB 0x60
> +#define ADV7180_STATUS1_AUTOD_SECAM_525 0x70
> +
> +#define ADV7180_IDENT_REG 0x11
> +#define ADV7180_ID_7180 0x18
> +
> +
> +struct adv7180_state {
> + struct v4l2_subdev sd;
> +};
> +
> +static v4l2_std_id determine_norm(struct i2c_client *client)
> +{
> + u8 status1 = i2c_smbus_read_byte_data(client, ADV7180_STATUS1_REG);
> +
> + switch (status1 & ADV7180_STATUS1_AUTOD_MASK) {
> + case ADV7180_STATUS1_AUTOD_NTSM_M_J:
> + return V4L2_STD_NTSC_M_JP;
> + case ADV7180_STATUS1_AUTOD_NTSC_4_43:
> + return V4L2_STD_NTSC_443;
> + case ADV7180_STATUS1_AUTOD_PAL_M:
> + return V4L2_STD_PAL_M;
> + case ADV7180_STATUS1_AUTOD_PAL_60:
> + return V4L2_STD_PAL_60;
> + case ADV7180_STATUS1_AUTOD_PAL_B_G:
> + return V4L2_STD_PAL;
> + case ADV7180_STATUS1_AUTOD_SECAM:
> + return V4L2_STD_SECAM;
> + case ADV7180_STATUS1_AUTOD_PAL_COMB:
> + return V4L2_STD_PAL_Nc | V4L2_STD_PAL_N;
> + case ADV7180_STATUS1_AUTOD_SECAM_525:
> + return V4L2_STD_SECAM;
> + default:
> + return V4L2_STD_UNKNOWN;
> + }
> +}
> +
> +static inline struct adv7180_state *to_state(struct v4l2_subdev *sd)
> +{
> + return container_of(sd, struct adv7180_state, sd);
> +}
> +
> +static int adv7180_querystd(struct v4l2_subdev *sd, v4l2_std_id *std)
> +{
> + struct i2c_client *client = v4l2_get_subdevdata(sd);
> +
> + *(v4l2_std_id *)std = determine_norm(client);
That cast appears to be unneeded?
I queued a patch to remove it.
> + return 0;
> +}
> +
> +static int adv7180_g_chip_ident(struct v4l2_subdev *sd,
> + struct v4l2_dbg_chip_ident *chip)
> +{
> + struct i2c_client *client = v4l2_get_subdevdata(sd);
> +
> + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_ADV7180, 0);
> +}
> +
> +static const struct v4l2_subdev_video_ops adv7180_video_ops = {
> + .querystd = adv7180_querystd,
> +};
> +
> +static const struct v4l2_subdev_core_ops adv7180_core_ops = {
> + .g_chip_ident = adv7180_g_chip_ident,
> +};
> +
> +static const struct v4l2_subdev_ops adv7180_ops = {
> + .core = &adv7180_core_ops,
> + .video = &adv7180_video_ops,
> +};
> +
> +/*
> + * Generic i2c probe
> + * concerning the addresses: i2c wants 7 bit (without the r/w bit), so
> '>>1'
Your email client wordwrapped the patch.
Here's what you changed since v1:
drivers/media/video/adv7180.c | 95 ++++++++++++--------------------
1 file changed, 38 insertions(+), 57 deletions(-)
@@ -27,8 +27,8 @@
#include <linux/videodev2.h>
#include <media/v4l2-device.h>
#include <media/v4l2-chip-ident.h>
-#include <media/v4l2-i2c-drv.h>
+#define DRIVER_NAME "adv7180"
#define ADV7180_INPUT_CONTROL_REG 0x00
#define ADV7180_INPUT_CONTROL_PAL_BG_NTSC_J_SECAM 0x00
@@ -51,10 +51,6 @@
#define ADV7180_ID_7180 0x18
-static unsigned short normal_i2c[] = { 0x42 >> 1, I2C_CLIENT_END };
-
-I2C_CLIENT_INSMOD;
-
struct adv7180_state {
struct v4l2_subdev sd;
};
@@ -98,16 +94,6 @@ static int adv7180_querystd(struct v4l2_
return 0;
}
-static int adv7180_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
-{
- return -EINVAL;
-}
-
-static int adv7180_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
-{
- return -EINVAL;
-}
-
static int adv7180_g_chip_ident(struct v4l2_subdev *sd,
struct v4l2_dbg_chip_ident *chip)
{
@@ -116,26 +102,12 @@ static int adv7180_g_chip_ident(struct v
return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_ADV7180, 0);
}
-static int adv7180_log_status(struct v4l2_subdev *sd)
-{
- v4l2_info(sd, "Normal operation\n");
- return 0;
-}
-
-static irqreturn_t adv7180_irq(int irq, void *devid)
-{
- return IRQ_NONE;
-}
-
static const struct v4l2_subdev_video_ops adv7180_video_ops = {
.querystd = adv7180_querystd,
};
static const struct v4l2_subdev_core_ops adv7180_core_ops = {
- .log_status = adv7180_log_status,
.g_chip_ident = adv7180_g_chip_ident,
- .g_ctrl = adv7180_g_ctrl,
- .s_ctrl = adv7180_s_ctrl,
};
static const struct v4l2_subdev_ops adv7180_ops = {
@@ -153,6 +125,7 @@ static int adv7180_probe(struct i2c_clie
{
struct adv7180_state *state;
struct v4l2_subdev *sd;
+ int ret;
/* Check if the adapter supports the needed features */
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
@@ -161,32 +134,26 @@ static int adv7180_probe(struct i2c_clie
v4l_info(client, "chip found @ 0x%02x (%s)\n",
client->addr << 1, client->adapter->name);
- state = kmalloc(sizeof(struct adv7180_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct adv7180_state), GFP_KERNEL);
if (state == NULL)
return -ENOMEM;
sd = &state->sd;
v4l2_i2c_subdev_init(sd, client, &adv7180_ops);
/* Initialize adv7180 */
-
- /* register interrupt, can be used later */
- if (client->irq > 0) {
- /* we can use IRQ */
- int err = request_irq(client->irq, adv7180_irq, IRQF_SHARED,
- "adv7180", sd);
- if (err) {
- printk(KERN_ERR "adv7180: Failed to request IRQ\n");
- v4l2_device_unregister_subdev(sd);
- kfree(state);
- return err;
- }
- }
-
/* enable autodetection */
- i2c_smbus_write_byte_data(client, ADV7180_INPUT_CONTROL_REG,
+ ret = i2c_smbus_write_byte_data(client, ADV7180_INPUT_CONTROL_REG,
ADV7180_INPUT_CONTROL_PAL_BG_NTSC_J_SECAM);
- i2c_smbus_write_byte_data(client, ADV7180_AUTODETECT_ENABLE_REG,
- ADV7180_AUTODETECT_DEFAULT);
+ if (ret > 0)
+ ret = i2c_smbus_write_byte_data(client,
+ ADV7180_AUTODETECT_ENABLE_REG,
+ ADV7180_AUTODETECT_DEFAULT);
+ if (ret < 0) {
+ printk(KERN_ERR DRIVER_NAME
+ ": Failed to communicate to chip: %d\n", ret);
+ return ret;
+ }
+
return 0;
}
@@ -194,27 +161,41 @@ static int adv7180_remove(struct i2c_cli
{
struct v4l2_subdev *sd = i2c_get_clientdata(client);
- if (client->irq > 0)
- free_irq(client->irq, sd);
-
v4l2_device_unregister_subdev(sd);
kfree(to_state(sd));
return 0;
}
static const struct i2c_device_id adv7180_id[] = {
- { "adv7180", 0 },
- { }
+ {DRIVER_NAME, 0},
+ {},
};
+
MODULE_DEVICE_TABLE(i2c, adv7180_id);
-static struct v4l2_i2c_driver_data v4l2_i2c_data = {
- .name = "adv7180",
- .probe = adv7180_probe,
- .remove = adv7180_remove,
- .id_table = adv7180_id,
+static struct i2c_driver adv7180_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = DRIVER_NAME,
+ },
+ .probe = adv7180_probe,
+ .remove = adv7180_remove,
+ .id_table = adv7180_id,
};
+static __init int adv7180_init(void)
+{
+ return i2c_add_driver(&adv7180_driver);
+}
+
+static __exit void adv7180_exit(void)
+{
+ i2c_del_driver(&adv7180_driver);
+}
+
+module_init(adv7180_init);
+module_exit(adv7180_exit);
+
MODULE_DESCRIPTION("Analog Devices ADV7180 video decoder driver");
MODULE_AUTHOR("Mocean Laboratories");
MODULE_LICENSE("GPL v2");