diff mbox series

[v5,1/3] media: i2c: imx274: Fix Y_OUT_SIZE register setting

Message ID 1599012278-10203-2-git-send-email-skomatineni@nvidia.com (mailing list archive)
State Changes Requested, archived
Delegated to: Sakari Ailus
Headers
Series IMX274 fixes and power on and off implementation |

Commit Message

Sowjanya Komatineni Sept. 2, 2020, 2:04 a.m. UTC 
  As per Sony IMX274 Y_OUT_SIZE should be the height of effective
image output from the sensor which are the actual total lines
sent over MIPI CSI to receiver.

So, Y_OUT_SIZE should be same as crop height and this patch fixes it.

Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
---
 drivers/media/i2c/imx274.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/media/i2c/imx274.c b/drivers/media/i2c/imx274.c
index 6011cec..a4b9dfd 100644
--- a/drivers/media/i2c/imx274.c
+++ b/drivers/media/i2c/imx274.c
@@ -1163,7 +1163,7 @@  static int imx274_apply_trimming(struct stimx274 *imx274)
 		(-imx274->crop.top / 2) : (imx274->crop.top / 2);
 	v_cut = (IMX274_MAX_HEIGHT - imx274->crop.height) / 2;
 	write_v_size = imx274->crop.height + 22;
-	y_out_size   = imx274->crop.height + 14;
+	y_out_size   = imx274->crop.height;
 
 	err = imx274_write_mbreg(imx274, IMX274_HMAX_REG_LSB, hmax, 2);
 	if (!err)