[PATCHv3,1/2] tda18250: support for new silicon tuner
Commit Message
From: Olli Salonen <olli.salonen@iki.fi>
NXP TDA18250 silicon tuner driver.
Version 3 removes regmap_exit as I was pointed out that device
management code automatically frees the regmap.
Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
---
drivers/media/tuners/Kconfig | 7 +
drivers/media/tuners/Makefile | 1 +
drivers/media/tuners/tda18250.c | 921 +++++++++++++++++++++++++++++++++++
drivers/media/tuners/tda18250.h | 51 ++
drivers/media/tuners/tda18250_priv.h | 153 ++++++
5 files changed, 1133 insertions(+)
create mode 100644 drivers/media/tuners/tda18250.c
create mode 100644 drivers/media/tuners/tda18250.h
create mode 100644 drivers/media/tuners/tda18250_priv.h
Comments
On Wed, Aug 2, 2017 at 9:00 AM, <olli.salonen@iki.fi> wrote:
> From: Olli Salonen <olli.salonen@iki.fi>
>
> NXP TDA18250 silicon tuner driver.
>
> Version 3 removes regmap_exit as I was pointed out that device
> management code automatically frees the regmap.
>
> Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Reviewed-by: Michael Ira Krufky <mkrufky@linuxtv.org>
> ---
> drivers/media/tuners/Kconfig | 7 +
> drivers/media/tuners/Makefile | 1 +
> drivers/media/tuners/tda18250.c | 921 +++++++++++++++++++++++++++++++++++
> drivers/media/tuners/tda18250.h | 51 ++
> drivers/media/tuners/tda18250_priv.h | 153 ++++++
> 5 files changed, 1133 insertions(+)
> create mode 100644 drivers/media/tuners/tda18250.c
> create mode 100644 drivers/media/tuners/tda18250.h
> create mode 100644 drivers/media/tuners/tda18250_priv.h
Olli,
Pardon the multiple copies of this email -- I had some trouble with my
mailer (and forgot to keep the mailing list cc'd)
Thank you for your contribution. Things look good, I just have a
question, see inline below:
>
> diff --git a/drivers/media/tuners/Kconfig b/drivers/media/tuners/Kconfig
> index 05998f0..6687514 100644
> --- a/drivers/media/tuners/Kconfig
> +++ b/drivers/media/tuners/Kconfig
> @@ -26,6 +26,13 @@ config MEDIA_TUNER_SIMPLE
> help
> Say Y here to include support for various simple tuners.
>
> +config MEDIA_TUNER_TDA18250
> + tristate "NXP TDA18250 silicon tuner"
> + depends on MEDIA_SUPPORT && I2C
> + default m if !MEDIA_SUBDRV_AUTOSELECT
> + help
> + Say Y here to include support for TDA18250 tuner.
> +
> config MEDIA_TUNER_TDA8290
> tristate "TDA 8290/8295 + 8275(a)/18271 tuner combo"
> depends on MEDIA_SUPPORT && I2C
> diff --git a/drivers/media/tuners/Makefile b/drivers/media/tuners/Makefile
> index 06a9ab6..4b9444b 100644
> --- a/drivers/media/tuners/Makefile
> +++ b/drivers/media/tuners/Makefile
> @@ -41,6 +41,7 @@ obj-$(CONFIG_MEDIA_TUNER_R820T) += r820t.o
> obj-$(CONFIG_MEDIA_TUNER_MXL301RF) += mxl301rf.o
> obj-$(CONFIG_MEDIA_TUNER_QM1D1C0042) += qm1d1c0042.o
> obj-$(CONFIG_MEDIA_TUNER_M88RS6000T) += m88rs6000t.o
> +obj-$(CONFIG_MEDIA_TUNER_TDA18250) += tda18250.o
>
> ccflags-y += -I$(srctree)/drivers/media/dvb-core
> ccflags-y += -I$(srctree)/drivers/media/dvb-frontends
> diff --git a/drivers/media/tuners/tda18250.c b/drivers/media/tuners/tda18250.c
> new file mode 100644
> index 0000000..3a10bd1
> --- /dev/null
> +++ b/drivers/media/tuners/tda18250.c
> @@ -0,0 +1,921 @@
> +/*
> + * NXP TDA18250 silicon tuner driver
> + *
> + * Copyright (C) 2017 Olli Salonen <olli.salonen@iki.fi>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#include "tda18250_priv.h"
> +#include <linux/regmap.h>
> +
> +static const struct dvb_tuner_ops tda18250_ops;
> +
> +static int tda18250_power_control(struct dvb_frontend *fe,
> + unsigned int power_state)
> +{
> + struct i2c_client *client = fe->tuner_priv;
> + struct tda18250_dev *dev = i2c_get_clientdata(client);
> + int ret;
> + unsigned int utmp;
> +
> + dev_dbg(&client->dev, "power state: %d", power_state);
> +
> + switch (power_state) {
> + case TDA18250_POWER_NORMAL:
> + ret = regmap_write_bits(dev->regmap, R06_POWER2, 0x07, 0x00);
> + if (ret)
> + goto err;
> + ret = regmap_write_bits(dev->regmap, R25_REF, 0xc0, 0xc0);
> + if (ret)
> + goto err;
> + break;
> + case TDA18250_POWER_STANDBY:
> + if (dev->loopthrough) {
> + ret = regmap_write_bits(dev->regmap, R25_REF, 0xc0, 0x80);
> + if (ret)
> + goto err;
> + ret = regmap_write_bits(dev->regmap, R06_POWER2, 0x07, 0x02);
> + if (ret)
> + goto err;
> + ret = regmap_write_bits(dev->regmap, R10_LT1, 0x80, 0x00);
> + if (ret)
> + goto err;
> + } else {
> + ret = regmap_write_bits(dev->regmap, R25_REF, 0xc0, 0x80);
> + if (ret)
> + goto err;
> + ret = regmap_write_bits(dev->regmap, R06_POWER2, 0x07, 0x01);
> + if (ret)
> + goto err;
> + ret = regmap_read(dev->regmap, R0D_AGC12, &utmp);
> + if (ret)
> + goto err;
> + ret = regmap_write_bits(dev->regmap, R0D_AGC12, 0x03, 0x03);
> + if (ret)
> + goto err;
> + ret = regmap_write_bits(dev->regmap, R10_LT1, 0x80, 0x80);
> + if (ret)
> + goto err;
> + ret = regmap_write_bits(dev->regmap, R0D_AGC12, 0x03, utmp & 0x03);
> + if (ret)
> + goto err;
> + }
> + break;
> + default:
> + ret = -EINVAL;
> + goto err;
> + }
> +
> + return 0;
> +err:
> + return ret;
> +}
> +
> +static int tda18250_wait_for_irq(struct dvb_frontend *fe,
> + int maxwait, int step, u8 irq)
> +{
> + struct i2c_client *client = fe->tuner_priv;
> + struct tda18250_dev *dev = i2c_get_clientdata(client);
> + int ret;
> + unsigned long timeout;
> + bool triggered;
> + unsigned int utmp;
> +
> + triggered = false;
> + timeout = jiffies + msecs_to_jiffies(maxwait);
> + while (!time_after(jiffies, timeout)) {
> + // check for the IRQ
> + ret = regmap_read(dev->regmap, R08_IRQ1, &utmp);
> + if (ret)
> + goto err;
> + if ((utmp & irq) == irq) {
> + triggered = true;
> + break;
> + }
> + msleep(step);
> + }
> +
> + dev_dbg(&client->dev, "waited IRQ (0x%02x) %d ms, triggered: %s", irq,
> + jiffies_to_msecs(jiffies) -
> + (jiffies_to_msecs(timeout) - maxwait),
> + triggered ? "true" : "false");
> +
> + if (!triggered)
> + return -ETIMEDOUT;
> +
> + return 0;
> +err:
> + return ret;
> +}
> +
> +static int tda18250_init(struct dvb_frontend *fe)
> +{
> + struct i2c_client *client = fe->tuner_priv;
> + struct tda18250_dev *dev = i2c_get_clientdata(client);
> + int ret, i;
> +
> + /* default values for various regs */
> + static const u8 init_regs[][2] = {
> + { R0C_AGC11, 0xc7 },
> + { R0D_AGC12, 0x5d },
> + { R0E_AGC13, 0x40 },
> + { R0F_AGC14, 0x0e },
> + { R10_LT1, 0x47 },
> + { R11_LT2, 0x4e },
> + { R12_AGC21, 0x26 },
> + { R13_AGC22, 0x60 },
> + { R18_AGC32, 0x37 },
> + { R19_AGC33, 0x09 },
> + { R1A_AGCK, 0x00 },
> + { R1E_WI_FI, 0x29 },
> + { R1F_RF_BPF, 0x06 },
> + { R20_IR_MIX, 0xc6 },
> + { R21_IF_AGC, 0x00 },
> + { R2C_PS1, 0x75 },
> + { R2D_PS2, 0x06 },
> + { R2E_PS3, 0x07 },
> + { R30_RSSI2, 0x0e },
> + { R31_IRQ_CTRL, 0x00 },
> + { R39_SD5, 0x00 },
> + { R3B_REGU, 0x55 },
> + { R3C_RCCAL1, 0xa7 },
> + { R3F_IRCAL2, 0x85 },
> + { R40_IRCAL3, 0x87 },
> + { R41_IRCAL4, 0xc0 },
> + { R43_PD1, 0x40 },
> + { R44_PD2, 0xc0 },
> + { R46_CPUMP, 0x0c },
> + { R47_LNAPOL, 0x64 },
> + { R4B_XTALOSC1, 0x30 },
> + { R59_AGC2_UP2, 0x05 },
> + { R5B_AGC_AUTO, 0x07 },
> + { R5C_AGC_DEBUG, 0x00 },
> + };
> +
> + /* crystal related regs depend on frequency */
> + static const u8 xtal_regs[][5] = {
> + /* reg: 4d 4e 4f 50 51 */
> + [TDA18250_XTAL_FREQ_16MHZ] = { 0x3e, 0x80, 0x50, 0x00, 0x20 },
> + [TDA18250_XTAL_FREQ_24MHZ] = { 0x5d, 0xc0, 0xec, 0x00, 0x18 },
> + [TDA18250_XTAL_FREQ_25MHZ] = { 0x61, 0xa8, 0xec, 0x80, 0x19 },
> + [TDA18250_XTAL_FREQ_27MHZ] = { 0x69, 0x78, 0x8d, 0x80, 0x1b },
> + [TDA18250_XTAL_FREQ_30MHZ] = { 0x75, 0x30, 0x8f, 0x00, 0x1e },
> + };
> +
> + dev_dbg(&client->dev, "\n");
> +
> + ret = tda18250_power_control(fe, TDA18250_POWER_NORMAL);
> + if (ret)
> + goto err;
> +
> + msleep(20);
> +
> + if (dev->warm)
> + goto warm;
> +
> + /* set initial register values */
> + for (i = 0; i < ARRAY_SIZE(init_regs); i++) {
> + ret = regmap_write(dev->regmap, init_regs[i][0],
> + init_regs[i][1]);
> + if (ret)
> + goto err;
> + }
> +
> + /* set xtal related regs */
> + ret = regmap_bulk_write(dev->regmap, R4D_XTALFLX1,
> + xtal_regs[dev->xtal_freq], 5);
> + if (ret)
> + goto err;
> +
> + ret = regmap_write_bits(dev->regmap, R10_LT1, 0x80,
> + dev->loopthrough ? 0x00 : 0x80);
> + if (ret)
> + goto err;
> +
> + /* clear IRQ */
> + ret = regmap_write(dev->regmap, R0A_IRQ3, TDA18250_IRQ_HW_INIT);
> + if (ret)
> + goto err;
> +
> + /* start HW init */
> + ret = regmap_write(dev->regmap, R2A_MSM1, 0x70);
> + if (ret)
> + goto err;
> +
> + ret = regmap_write(dev->regmap, R2B_MSM2, 0x01);
> + if (ret)
> + goto err;
> +
> + ret = tda18250_wait_for_irq(fe, 500, 10, TDA18250_IRQ_HW_INIT);
> + if (ret)
> + goto err;
> +
> + /* tuner calibration */
> + ret = regmap_write(dev->regmap, R2A_MSM1, 0x02);
> + if (ret)
> + goto err;
> +
> + ret = regmap_write(dev->regmap, R2B_MSM2, 0x01);
> + if (ret)
> + goto err;
> +
> + ret = tda18250_wait_for_irq(fe, 500, 10, TDA18250_IRQ_CAL);
> + if (ret)
> + goto err;
> +
> + dev->warm = true;
> +
> +warm:
> + /* power up LNA */
> + ret = regmap_write_bits(dev->regmap, R0C_AGC11, 0x80, 0x00);
> + if (ret)
> + goto err;
> +
> + return 0;
> +err:
> + dev_dbg(&client->dev, "failed=%d", ret);
> + return ret;
> +}
> +
> +static int tda18250_set_agc(struct dvb_frontend *fe)
> +{
> + struct i2c_client *client = fe->tuner_priv;
> + struct tda18250_dev *dev = i2c_get_clientdata(client);
> + struct dtv_frontend_properties *c = &fe->dtv_property_cache;
> + int ret;
> + u8 utmp, utmp2;
> +
> + dev_dbg(&client->dev, "\n");
> +
> + ret = regmap_write_bits(dev->regmap, R1F_RF_BPF, 0x87, 0x06);
> + if (ret)
> + goto err;
> +
> + utmp = ((c->frequency < 100000000) &&
> + ((c->delivery_system == SYS_DVBC_ANNEX_A) ||
> + (c->delivery_system == SYS_DVBC_ANNEX_C)) &&
> + (c->bandwidth_hz == 6000000)) ? 0x80 : 0x00;
> + ret = regmap_write(dev->regmap, R5A_H3H5, utmp);
> + if (ret)
> + goto err;
> +
> + /* AGC1 */
> + switch (c->delivery_system) {
> + case SYS_ATSC:
> + case SYS_DVBT:
> + case SYS_DVBT2:
> + utmp = 4;
> + break;
> + default: /* DVB-C/QAM */
> + switch (c->bandwidth_hz) {
> + case 6000000:
> + utmp = (c->frequency < 800000000) ? 6 : 4;
> + break;
> + default: /* 7.935 and 8 MHz */
> + utmp = (c->frequency < 100000000) ? 2 : 3;
> + break;
> + }
> + break;
> + }
> +
> + ret = regmap_write_bits(dev->regmap, R0C_AGC11, 0x07, utmp);
> + if (ret)
> + goto err;
> +
> + /* AGC2 */
> + switch (c->delivery_system) {
> + case SYS_ATSC:
> + case SYS_DVBT:
> + case SYS_DVBT2:
> + utmp = (c->frequency < 320000000) ? 20 : 16;
> + utmp2 = (c->frequency < 320000000) ? 22 : 18;
> + break;
> + default: /* DVB-C/QAM */
> + switch (c->bandwidth_hz) {
> + case 6000000:
> + if (c->frequency < 600000000) {
> + utmp = 18;
> + utmp2 = 22;
> + } else if (c->frequency < 800000000) {
> + utmp = 16;
> + utmp2 = 20;
> + } else {
> + utmp = 14;
> + utmp2 = 16;
> + }
> + break;
> + default: /* 7.935 and 8 MHz */
> + utmp = (c->frequency < 320000000) ? 16 : 18;
> + utmp2 = (c->frequency < 320000000) ? 18 : 20;
> + break;
> + }
> + break;
> + }
> + ret = regmap_write_bits(dev->regmap, R58_AGC2_UP1, 0x1f, utmp2+8);
> + if (ret)
> + goto err;
> + ret = regmap_write_bits(dev->regmap, R13_AGC22, 0x1f, utmp);
> + if (ret)
> + goto err;
> + ret = regmap_write_bits(dev->regmap, R14_AGC23, 0x1f, utmp2);
> + if (ret)
> + goto err;
> +
> + switch (c->delivery_system) {
> + case SYS_ATSC:
> + case SYS_DVBT:
> + case SYS_DVBT2:
> + utmp = 98;
> + break;
> + default: /* DVB-C/QAM */
> + utmp = 90;
> + break;
> + }
> + ret = regmap_write_bits(dev->regmap, R16_AGC25, 0xf8, utmp);
> + if (ret)
> + goto err;
> +
> + ret = regmap_write_bits(dev->regmap, R12_AGC21, 0x60,
> + (c->frequency > 800000000) ? 0x40 : 0x20);
> + if (ret)
> + goto err;
> +
> + /* AGC3 */
> + switch (c->delivery_system) {
> + case SYS_ATSC:
> + case SYS_DVBT:
> + case SYS_DVBT2:
> + utmp = (c->frequency < 320000000) ? 5 : 7;
> + utmp2 = (c->frequency < 320000000) ? 10 : 12;
> + break;
> + default: /* DVB-C/QAM */
> + utmp = 7;
> + utmp2 = 12;
> + break;
> + }
> + ret = regmap_write(dev->regmap, R17_AGC31, (utmp << 4) | utmp2);
> + if (ret)
> + goto err;
> +
> + /* S2D */
> + switch (c->delivery_system) {
> + case SYS_ATSC:
> + case SYS_DVBT:
> + case SYS_DVBT2:
> + if (c->bandwidth_hz == 8000000)
> + utmp = 0x04;
> + else
> + utmp = (c->frequency < 320000000) ? 0x04 : 0x02;
> + break;
> + default: /* DVB-C/QAM */
> + if (c->bandwidth_hz == 6000000)
> + utmp = ((c->frequency > 172544000) &&
> + (c->frequency < 320000000)) ? 0x04 : 0x02;
> + else /* 7.935 and 8 MHz */
> + utmp = ((c->frequency > 320000000) &&
> + (c->frequency < 600000000)) ? 0x02 : 0x04;
> + break;
> + }
> + ret = regmap_write_bits(dev->regmap, R20_IR_MIX, 0x06, utmp);
> + if (ret)
> + goto err;
> +
> + switch (c->delivery_system) {
> + case SYS_ATSC:
> + case SYS_DVBT:
> + case SYS_DVBT2:
> + utmp = 0;
> + break;
> + default: /* DVB-C/QAM */
> + utmp = (c->frequency < 600000000) ? 0 : 3;
> + break;
> + }
> + ret = regmap_write_bits(dev->regmap, R16_AGC25, 0x03, utmp);
> + if (ret)
> + goto err;
> +
> + utmp = 0x09;
> + switch (c->delivery_system) {
> + case SYS_ATSC:
> + case SYS_DVBT:
> + case SYS_DVBT2:
> + if (c->bandwidth_hz == 8000000)
> + utmp = 0x0c;
> + break;
> + default: /* DVB-C/QAM */
> + utmp = 0x0c;
> + break;
> + }
> + ret = regmap_write_bits(dev->regmap, R0F_AGC14, 0x3f, utmp);
> + if (ret)
> + goto err;
> +
> + return 0;
> +err:
> + dev_dbg(&client->dev, "failed=%d", ret);
> + return ret;
> +}
> +
> +static int tda18250_pll_calc(struct dvb_frontend *fe, u8 *rdiv,
> + u8 *ndiv, u8 *icp)
> +{
> + struct i2c_client *client = fe->tuner_priv;
> + struct tda18250_dev *dev = i2c_get_clientdata(client);
> + struct dtv_frontend_properties *c = &fe->dtv_property_cache;
> + int ret;
> + unsigned int uval, exp, lopd, scale;
> + unsigned long fvco;
> +
> + ret = regmap_read(dev->regmap, R34_MD1, &uval);
> + if (ret)
> + goto err;
> +
> + exp = (uval & 0x70) >> 4;
> + if (exp > 5)
> + exp = 0;
> + lopd = 1 << (exp - 1);
> + scale = uval & 0x0f;
> + fvco = lopd * scale * ((c->frequency / 1000) + dev->if_frequency);
> +
> + switch (dev->xtal_freq) {
> + case TDA18250_XTAL_FREQ_16MHZ:
> + *rdiv = 1;
> + *ndiv = 0;
> + *icp = (fvco < 6622000) ? 0x05 : 0x02;
> + break;
> + case TDA18250_XTAL_FREQ_24MHZ:
> + case TDA18250_XTAL_FREQ_25MHZ:
> + *rdiv = 3;
> + *ndiv = 1;
> + *icp = (fvco < 6622000) ? 0x05 : 0x02;
> + break;
> + case TDA18250_XTAL_FREQ_27MHZ:
> + if (fvco < 6643000) {
> + *rdiv = 2;
> + *ndiv = 0;
> + *icp = 0x05;
> + } else if (fvco < 6811000) {
> + *rdiv = 2;
> + *ndiv = 0;
> + *icp = 0x06;
> + } else {
> + *rdiv = 3;
> + *ndiv = 1;
> + *icp = 0x02;
> + }
> + break;
> + case TDA18250_XTAL_FREQ_30MHZ:
> + *rdiv = 2;
> + *ndiv = 0;
> + *icp = (fvco < 6811000) ? 0x05 : 0x02;
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + dev_dbg(&client->dev,
> + "lopd=%d scale=%u fvco=%lu, rdiv=%d ndiv=%d icp=%d",
> + lopd, scale, fvco, *rdiv, *ndiv, *icp);
> + return 0;
> +err:
> + return ret;
> +}
> +
> +static int tda18250_set_params(struct dvb_frontend *fe)
> +{
> + struct i2c_client *client = fe->tuner_priv;
> + struct tda18250_dev *dev = i2c_get_clientdata(client);
> + struct dtv_frontend_properties *c = &fe->dtv_property_cache;
> + u32 if_khz;
> + int ret;
> + unsigned int i, j;
> + u8 utmp;
> + u8 buf[3];
> +
> + #define REG 0
> + #define MASK 1
> + #define DVBT_6 2
> + #define DVBT_7 3
> + #define DVBT_8 4
> + #define DVBC_6 5
> + #define DVBC_8 6
> + #define ATSC 7
> +
> + static const u8 delsys_params[][16] = {
> + [REG] = { 0x22, 0x23, 0x24, 0x21, 0x0d, 0x0c, 0x0f, 0x14,
> + 0x0e, 0x12, 0x58, 0x59, 0x1a, 0x19, 0x1e, 0x30 },
> + [MASK] = { 0x77, 0xff, 0xff, 0x87, 0xf0, 0x78, 0x07, 0xe0,
> + 0x60, 0x0f, 0x60, 0x0f, 0x33, 0x30, 0x80, 0x06 },
> + [DVBT_6] = { 0x51, 0x03, 0x83, 0x82, 0x40, 0x48, 0x01, 0xe0,
> + 0x60, 0x0f, 0x60, 0x05, 0x03, 0x10, 0x00, 0x04 },
> + [DVBT_7] = { 0x52, 0x03, 0x85, 0x82, 0x40, 0x48, 0x01, 0xe0,
> + 0x60, 0x0f, 0x60, 0x05, 0x03, 0x10, 0x00, 0x04 },
> + [DVBT_8] = { 0x53, 0x03, 0x87, 0x82, 0x40, 0x48, 0x06, 0xe0,
> + 0x60, 0x07, 0x60, 0x05, 0x03, 0x10, 0x00, 0x04 },
> + [DVBC_6] = { 0x32, 0x05, 0x86, 0x82, 0x50, 0x00, 0x06, 0x60,
> + 0x40, 0x0e, 0x60, 0x05, 0x33, 0x10, 0x00, 0x04 },
> + [DVBC_8] = { 0x53, 0x03, 0x88, 0x82, 0x50, 0x00, 0x06, 0x60,
> + 0x40, 0x0e, 0x60, 0x05, 0x33, 0x10, 0x00, 0x04 },
> + [ATSC] = { 0x51, 0x03, 0x83, 0x82, 0x40, 0x48, 0x01, 0xe0,
> + 0x40, 0x0e, 0x60, 0x05, 0x03, 0x00, 0x80, 0x04 },
> + };
> +
> + dev_dbg(&client->dev,
> + "delivery_system=%d frequency=%u bandwidth_hz=%u",
> + c->delivery_system, c->frequency, c->bandwidth_hz);
> +
> +
> + switch (c->delivery_system) {
> + case SYS_ATSC:
> + j = ATSC;
> + if_khz = dev->if_atsc;
> + break;
> + case SYS_DVBT:
> + case SYS_DVBT2:
> + if (c->bandwidth_hz == 0) {
> + ret = -EINVAL;
> + goto err;
> + } else if (c->bandwidth_hz <= 6000000) {
> + j = DVBT_6;
> + if_khz = dev->if_dvbt_6;
> + } else if (c->bandwidth_hz <= 7000000) {
> + j = DVBT_7;
> + if_khz = dev->if_dvbt_7;
> + } else if (c->bandwidth_hz <= 8000000) {
> + j = DVBT_8;
> + if_khz = dev->if_dvbt_8;
> + } else {
> + ret = -EINVAL;
> + goto err;
> + }
> + break;
> + case SYS_DVBC_ANNEX_A:
> + case SYS_DVBC_ANNEX_C:
> + if (c->bandwidth_hz == 0) {
> + ret = -EINVAL;
> + goto err;
> + } else if (c->bandwidth_hz <= 6000000) {
> + j = DVBC_6;
> + if_khz = dev->if_dvbc_6;
> + } else if (c->bandwidth_hz <= 8000000) {
> + j = DVBC_8;
> + if_khz = dev->if_dvbc_8;
> + } else {
> + ret = -EINVAL;
> + goto err;
> + }
> + break;
> + default:
> + ret = -EINVAL;
> + dev_err(&client->dev, "unsupported delivery system=%d",
> + c->delivery_system);
> + goto err;
> + }
> +
> + /* set delivery system dependent registers */
> + for (i = 0; i < 16; i++) {
> + ret = regmap_write_bits(dev->regmap, delsys_params[REG][i],
> + delsys_params[MASK][i], delsys_params[j][i]);
> + if (ret)
> + goto err;
> + }
> +
> + /* set IF if needed */
> + if (dev->if_frequency != if_khz) {
> + utmp = DIV_ROUND_CLOSEST(if_khz, 50);
> + ret = regmap_write(dev->regmap, R26_IF, utmp);
> + if (ret)
> + goto err;
> + dev->if_frequency = if_khz;
> + dev_dbg(&client->dev, "set IF=%u kHz", if_khz);
> +
> + }
> +
> + ret = tda18250_set_agc(fe);
> + if (ret)
> + goto err;
> +
> + ret = regmap_write_bits(dev->regmap, R1A_AGCK, 0x03, 0x01);
> + if (ret)
> + goto err;
> +
> + ret = regmap_write_bits(dev->regmap, R14_AGC23, 0x40, 0x00);
> + if (ret)
> + goto err;
> +
> + /* set frequency */
> + buf[0] = ((c->frequency / 1000) >> 16) & 0xff;
> + buf[1] = ((c->frequency / 1000) >> 8) & 0xff;
> + buf[2] = ((c->frequency / 1000) >> 0) & 0xff;
> + ret = regmap_bulk_write(dev->regmap, R27_RF1, buf, 3);
> + if (ret)
> + goto err;
> +
> + ret = regmap_write(dev->regmap, R0A_IRQ3, TDA18250_IRQ_TUNE);
> + if (ret)
> + goto err;
> +
> + /* initial tune */
> + ret = regmap_write(dev->regmap, R2A_MSM1, 0x01);
> + if (ret)
> + goto err;
> +
> + ret = regmap_write(dev->regmap, R2B_MSM2, 0x01);
> + if (ret)
> + goto err;
> +
> + ret = tda18250_wait_for_irq(fe, 500, 10, TDA18250_IRQ_TUNE);
> + if (ret)
> + goto err;
> +
> + /* calc ndiv and rdiv */
> + ret = tda18250_pll_calc(fe, &buf[0], &buf[1], &buf[2]);
> + if (ret)
> + goto err;
> +
> + ret = regmap_write_bits(dev->regmap, R4F_XTALFLX3, 0xe0,
> + (buf[0] << 6) | (buf[1] << 5));
> + if (ret)
> + goto err;
> +
> + /* clear IRQ */
> + ret = regmap_write(dev->regmap, R0A_IRQ3, TDA18250_IRQ_TUNE);
> + if (ret)
> + goto err;
> +
> + ret = regmap_write_bits(dev->regmap, R46_CPUMP, 0x07, 0x00);
> + if (ret)
> + goto err;
> +
> + ret = regmap_write_bits(dev->regmap, R39_SD5, 0x03, 0x00);
> + if (ret)
> + goto err;
> +
> + /* tune again */
> + ret = regmap_write(dev->regmap, R2A_MSM1, 0x01); /* tune */
> + if (ret)
> + goto err;
> +
> + ret = regmap_write(dev->regmap, R2B_MSM2, 0x01); /* go */
> + if (ret)
> + goto err;
> +
> + ret = tda18250_wait_for_irq(fe, 500, 10, TDA18250_IRQ_TUNE);
> + if (ret)
> + goto err;
> +
> + /* pll locking */
> + msleep(5);
> +
> + ret = regmap_write_bits(dev->regmap, R2B_MSM2, 0x04, 0x04);
> + if (ret)
> + goto err;
> +
> + msleep(20);
> +
> + /* restore AGCK */
> + ret = regmap_write_bits(dev->regmap, R1A_AGCK, 0x03, 0x03);
> + if (ret)
> + goto err;
> +
> + ret = regmap_write_bits(dev->regmap, R14_AGC23, 0x40, 0x40);
> + if (ret)
> + goto err;
> +
> + /* charge pump */
> + ret = regmap_write_bits(dev->regmap, R46_CPUMP, 0x07, buf[2]);
> +
> + return 0;
> +err:
> + return ret;
> +}
> +
> +static int tda18250_get_if_frequency(struct dvb_frontend *fe, u32 *frequency)
> +{
> + struct i2c_client *client = fe->tuner_priv;
> + struct tda18250_dev *dev = i2c_get_clientdata(client);
> +
> + *frequency = dev->if_frequency * 1000;
> + return 0;
> +}
> +
> +static int tda18250_sleep(struct dvb_frontend *fe)
> +{
> + struct i2c_client *client = fe->tuner_priv;
> + struct tda18250_dev *dev = i2c_get_clientdata(client);
> + int ret;
> +
> + dev_dbg(&client->dev, "\n");
> +
> + /* power down LNA */
> + ret = regmap_write_bits(dev->regmap, R0C_AGC11, 0x80, 0x00);
> + if (ret)
> + return ret;
> +
> + ret = tda18250_power_control(fe, TDA18250_POWER_STANDBY);
> + return ret;
> +}
Do we know for sure if the IF_FREQUENCY is preserved after returning
from a sleep? It might be a good idea to set `dev->if_frequency = 0`
within `tda18250_sleep` to be sure that it gets set again on the next
tune, but you may want to check the specification first, if its
available.
This is not a show-stopper -- We can merge this as-is and this can be
handled in a follow-up patch.
> +
> +static const struct dvb_tuner_ops tda18250_ops = {
> + .info = {
> + .name = "NXP TDA18250",
> + .frequency_min = 42000000,
> + .frequency_max = 870000000,
> + },
> +
> + .init = tda18250_init,
> + .set_params = tda18250_set_params,
> + .get_if_frequency = tda18250_get_if_frequency,
> + .sleep = tda18250_sleep,
> +};
> +
> +static int tda18250_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct tda18250_config *cfg = client->dev.platform_data;
> + struct dvb_frontend *fe = cfg->fe;
> + struct tda18250_dev *dev;
> + int ret;
> + unsigned char chip_id[3];
> +
> + /* some registers are always read from HW */
> + static const struct regmap_range tda18250_yes_ranges[] = {
> + regmap_reg_range(R05_POWER1, R0B_IRQ4),
> + regmap_reg_range(R21_IF_AGC, R21_IF_AGC),
> + regmap_reg_range(R2A_MSM1, R2B_MSM2),
> + regmap_reg_range(R2F_RSSI1, R31_IRQ_CTRL),
> + };
> +
> + static const struct regmap_access_table tda18250_volatile_table = {
> + .yes_ranges = tda18250_yes_ranges,
> + .n_yes_ranges = ARRAY_SIZE(tda18250_yes_ranges),
> + };
> +
> + static const struct regmap_config tda18250_regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .max_register = TDA18250_NUM_REGS - 1,
> + .volatile_table = &tda18250_volatile_table,
> + };
> +
> + dev = kzalloc(sizeof(*dev), GFP_KERNEL);
> + if (!dev) {
> + ret = -ENOMEM;
> + goto err;
> + }
> +
> + i2c_set_clientdata(client, dev);
> +
> + dev->fe = cfg->fe;
> + dev->loopthrough = cfg->loopthrough;
> + if (cfg->xtal_freq < TDA18250_XTAL_FREQ_MAX) {
> + dev->xtal_freq = cfg->xtal_freq;
> + } else {
> + ret = -EINVAL;
> + dev_err(&client->dev, "xtal_freq invalid=%d", cfg->xtal_freq);
> + goto err_kfree;
> + }
> + dev->if_dvbt_6 = cfg->if_dvbt_6;
> + dev->if_dvbt_7 = cfg->if_dvbt_7;
> + dev->if_dvbt_8 = cfg->if_dvbt_8;
> + dev->if_dvbc_6 = cfg->if_dvbc_6;
> + dev->if_dvbc_8 = cfg->if_dvbc_8;
> + dev->if_atsc = cfg->if_atsc;
> +
> + dev->if_frequency = 0;
> + dev->warm = false;
> +
> + dev->regmap = devm_regmap_init_i2c(client, &tda18250_regmap_config);
> + if (IS_ERR(dev->regmap)) {
> + ret = PTR_ERR(dev->regmap);
> + goto err_kfree;
> + }
> +
> + /* read the three chip ID registers */
> + regmap_bulk_read(dev->regmap, R00_ID1, &chip_id, 3);
> + dev_dbg(&client->dev, "chip_id=%02x:%02x:%02x",
> + chip_id[0], chip_id[1], chip_id[2]);
> +
> + switch (chip_id[0]) {
> + case 0xc7:
> + dev->slave = false;
> + break;
> + case 0x47:
> + dev->slave = true;
> + break;
> + default:
> + ret = -ENODEV;
> + goto err_kfree;
> + }
> +
> + if (chip_id[1] != 0x4a) {
> + ret = -ENODEV;
> + goto err_kfree;
> + }
> +
> + switch (chip_id[2]) {
> + case 0x20:
> + dev_info(&client->dev,
> + "NXP TDA18250AHN/%s successfully identified",
> + dev->slave ? "S" : "M");
> + break;
> + case 0x21:
> + dev_info(&client->dev,
> + "NXP TDA18250BHN/%s successfully identified",
> + dev->slave ? "S" : "M");
> + break;
> + default:
> + ret = -ENODEV;
> + goto err_kfree;
> + }
> +
> + fe->tuner_priv = client;
> + memcpy(&fe->ops.tuner_ops, &tda18250_ops,
> + sizeof(struct dvb_tuner_ops));
> +
> + /* media controller */
> +#ifdef CONFIG_MEDIA_CONTROLLER
> + if (cfg->mdev) {
> + dev->mdev = cfg->mdev;
> +
> + dev->ent.name = KBUILD_MODNAME;
> + dev->ent.function = MEDIA_ENT_F_TUNER;
> +
> + dev->pad[TUNER_PAD_RF_INPUT].flags = MEDIA_PAD_FL_SINK;
> + dev->pad[TUNER_PAD_OUTPUT].flags = MEDIA_PAD_FL_SOURCE;
> + dev->pad[TUNER_PAD_AUD_OUT].flags = MEDIA_PAD_FL_SOURCE;
> +
> + ret = media_entity_pads_init(&dev->ent, TUNER_NUM_PADS,
> + &dev->pad[0]);
> +
> + if (ret)
> + goto err_kfree;
> +
> + ret = media_device_register_entity(cfg->mdev, &dev->ent);
> + if (ret) {
> + media_entity_cleanup(&dev->ent);
> + goto err_kfree;
> + }
> + }
> +#endif
> +
> + /* put the tuner in standby */
> + tda18250_power_control(fe, TDA18250_POWER_STANDBY);
> +
> + return 0;
> +err_kfree:
> + kfree(dev);
> +err:
> + dev_dbg(&client->dev, "failed=%d", ret);
> + return ret;
> +}
> +
> +static int tda18250_remove(struct i2c_client *client)
> +{
> + struct tda18250_dev *dev = i2c_get_clientdata(client);
> + struct dvb_frontend *fe = dev->fe;
> +
> + dev_dbg(&client->dev, "\n");
> +
> +#ifdef CONFIG_MEDIA_CONTROLLER_DVB
> + if (dev->mdev)
> + media_device_unregister_entity(&dev->ent);
> +#endif
> +
> + memset(&fe->ops.tuner_ops, 0, sizeof(struct dvb_tuner_ops));
> + fe->tuner_priv = NULL;
> + kfree(dev);
> +
> + return 0;
> +}
> +
> +static const struct i2c_device_id tda18250_id_table[] = {
> + {"tda18250", 0},
> + {}
> +};
> +MODULE_DEVICE_TABLE(i2c, tda18250_id_table);
> +
> +static struct i2c_driver tda18250_driver = {
> + .driver = {
> + .name = "tda18250",
> + },
> + .probe = tda18250_probe,
> + .remove = tda18250_remove,
> + .id_table = tda18250_id_table,
> +};
> +
> +module_i2c_driver(tda18250_driver);
> +
> +MODULE_DESCRIPTION("NXP TDA18250 silicon tuner driver");
> +MODULE_AUTHOR("Olli Salonen <olli.salonen@iki.fi>");
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/media/tuners/tda18250.h b/drivers/media/tuners/tda18250.h
> new file mode 100644
> index 0000000..fb56906
> --- /dev/null
> +++ b/drivers/media/tuners/tda18250.h
> @@ -0,0 +1,51 @@
> +/*
> + * NXP TDA18250BHN silicon tuner driver
> + *
> + * Copyright (C) 2017 Olli Salonen <olli.salonen@iki.fi>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#ifndef TDA18250_H
> +#define TDA18250_H
> +
> +#include <linux/kconfig.h>
> +#include <media/media-device.h>
> +#include "dvb_frontend.h"
> +
> +#define TDA18250_XTAL_FREQ_16MHZ 0
> +#define TDA18250_XTAL_FREQ_24MHZ 1
> +#define TDA18250_XTAL_FREQ_25MHZ 2
> +#define TDA18250_XTAL_FREQ_27MHZ 3
> +#define TDA18250_XTAL_FREQ_30MHZ 4
> +#define TDA18250_XTAL_FREQ_MAX 5
> +
> +struct tda18250_config {
> + u16 if_dvbt_6;
> + u16 if_dvbt_7;
> + u16 if_dvbt_8;
> + u16 if_dvbc_6;
> + u16 if_dvbc_8;
> + u16 if_atsc;
> + u8 xtal_freq;
> + bool loopthrough;
> +
> + /*
> + * frontend
> + */
> + struct dvb_frontend *fe;
> +
> +#if defined(CONFIG_MEDIA_CONTROLLER)
> + struct media_device *mdev;
> +#endif
> +};
> +
> +#endif
> diff --git a/drivers/media/tuners/tda18250_priv.h b/drivers/media/tuners/tda18250_priv.h
> new file mode 100644
> index 0000000..feef991
> --- /dev/null
> +++ b/drivers/media/tuners/tda18250_priv.h
> @@ -0,0 +1,153 @@
> +/*
> + * NXP TDA18250BHN silicon tuner driver
> + *
> + * Copyright (C) 2017 Olli Salonen <olli.salonen@iki.fi>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#ifndef TDA18250_PRIV_H
> +#define TDA18250_PRIV_H
> +
> +#include "tda18250.h"
> +#include <media/v4l2-mc.h>
> +
> +#define R00_ID1 0x00 /* ID byte 1 */
> +#define R01_ID2 0x01 /* ID byte 2 */
> +#define R02_ID3 0x02 /* ID byte 3 */
> +#define R03_THERMO1 0x03 /* Thermo byte 1 */
> +#define R04_THERMO2 0x04 /* Thermo byte 2 */
> +#define R05_POWER1 0x05 /* Power byte 1 */
> +#define R06_POWER2 0x06 /* Power byte 2 */
> +#define R07_GPIO 0x07 /* GPIO */
> +#define R08_IRQ1 0x08 /* IRQ */
> +#define R09_IRQ2 0x09 /* IRQ */
> +#define R0A_IRQ3 0x0a /* IRQ */
> +#define R0B_IRQ4 0x0b /* IRQ */
> +#define R0C_AGC11 0x0c /* AGC1 byte 1 */
> +#define R0D_AGC12 0x0d /* AGC1 byte 2 */
> +#define R0E_AGC13 0x0e /* AGC1 byte 3 */
> +#define R0F_AGC14 0x0f /* AGC1 byte 4 */
> +#define R10_LT1 0x10 /* LT byte 1 */
> +#define R11_LT2 0x11 /* LT byte 2 */
> +#define R12_AGC21 0x12 /* AGC2 byte 1 */
> +#define R13_AGC22 0x13 /* AGC2 byte 2 */
> +#define R14_AGC23 0x14 /* AGC2 byte 3 */
> +#define R15_AGC24 0x15 /* AGC2 byte 4 */
> +#define R16_AGC25 0x16 /* AGC2 byte 5 */
> +#define R17_AGC31 0x17 /* AGC3 byte 1 */
> +#define R18_AGC32 0x18 /* AGC3 byte 2 */
> +#define R19_AGC33 0x19 /* AGC3 byte 3 */
> +#define R1A_AGCK 0x1a
> +#define R1B_GAIN1 0x1b
> +#define R1C_GAIN2 0x1c
> +#define R1D_GAIN3 0x1d
> +#define R1E_WI_FI 0x1e /* Wireless Filter */
> +#define R1F_RF_BPF 0x1f /* RF Band Pass Filter */
> +#define R20_IR_MIX 0x20 /* IR Mixer */
> +#define R21_IF_AGC 0x21
> +#define R22_IF1 0x22 /* IF byte 1 */
> +#define R23_IF2 0x23 /* IF byte 2 */
> +#define R24_IF3 0x24 /* IF byte 3 */
> +#define R25_REF 0x25 /* reference byte */
> +#define R26_IF 0x26 /* IF frequency */
> +#define R27_RF1 0x27 /* RF frequency byte 1 */
> +#define R28_RF2 0x28 /* RF frequency byte 2 */
> +#define R29_RF3 0x29 /* RF frequency byte 3 */
> +#define R2A_MSM1 0x2a
> +#define R2B_MSM2 0x2b
> +#define R2C_PS1 0x2c /* power saving mode byte 1 */
> +#define R2D_PS2 0x2d /* power saving mode byte 2 */
> +#define R2E_PS3 0x2e /* power saving mode byte 3 */
> +#define R2F_RSSI1 0x2f
> +#define R30_RSSI2 0x30
> +#define R31_IRQ_CTRL 0x31
> +#define R32_DUMMY 0x32
> +#define R33_TEST 0x33
> +#define R34_MD1 0x34
> +#define R35_SD1 0x35
> +#define R36_SD2 0x36
> +#define R37_SD3 0x37
> +#define R38_SD4 0x38
> +#define R39_SD5 0x39
> +#define R3A_SD_TEST 0x3a
> +#define R3B_REGU 0x3b
> +#define R3C_RCCAL1 0x3c
> +#define R3D_RCCAL2 0x3d
> +#define R3E_IRCAL1 0x3e
> +#define R3F_IRCAL2 0x3f
> +#define R40_IRCAL3 0x40
> +#define R41_IRCAL4 0x41
> +#define R42_IRCAL5 0x42
> +#define R43_PD1 0x43 /* power down byte 1 */
> +#define R44_PD2 0x44 /* power down byte 2 */
> +#define R45_PD 0x45 /* power down */
> +#define R46_CPUMP 0x46 /* charge pump */
> +#define R47_LNAPOL 0x47 /* LNA polar casc */
> +#define R48_SMOOTH1 0x48 /* smooth test byte 1 */
> +#define R49_SMOOTH2 0x49 /* smooth test byte 2 */
> +#define R4A_SMOOTH3 0x4a /* smooth test byte 3 */
> +#define R4B_XTALOSC1 0x4b
> +#define R4C_XTALOSC2 0x4c
> +#define R4D_XTALFLX1 0x4d
> +#define R4E_XTALFLX2 0x4e
> +#define R4F_XTALFLX3 0x4f
> +#define R50_XTALFLX4 0x50
> +#define R51_XTALFLX5 0x51
> +#define R52_IRLOOP0 0x52
> +#define R53_IRLOOP1 0x53
> +#define R54_IRLOOP2 0x54
> +#define R55_IRLOOP3 0x55
> +#define R56_IRLOOP4 0x56
> +#define R57_PLL_LOG 0x57
> +#define R58_AGC2_UP1 0x58
> +#define R59_AGC2_UP2 0x59
> +#define R5A_H3H5 0x5a
> +#define R5B_AGC_AUTO 0x5b
> +#define R5C_AGC_DEBUG 0x5c
> +
> +#define TDA18250_NUM_REGS 93
> +
> +#define TDA18250_POWER_STANDBY 0
> +#define TDA18250_POWER_NORMAL 1
> +
> +#define TDA18250_IRQ_CAL 0x81
> +#define TDA18250_IRQ_HW_INIT 0x82
> +#define TDA18250_IRQ_TUNE 0x88
> +
> +struct tda18250_dev {
> + struct mutex i2c_mutex;
> + struct dvb_frontend *fe;
> + struct i2c_adapter *i2c;
> + struct regmap *regmap;
> + u8 xtal_freq;
> + /* IF in kHz */
> + u16 if_dvbt_6;
> + u16 if_dvbt_7;
> + u16 if_dvbt_8;
> + u16 if_dvbc_6;
> + u16 if_dvbc_8;
> + u16 if_atsc;
> + u16 if_frequency;
> + bool slave;
> + bool loopthrough;
> + bool warm;
> + u8 regs[TDA18250_NUM_REGS];
> +
> +#if defined(CONFIG_MEDIA_CONTROLLER)
> + struct media_device *mdev;
> + struct media_entity ent;
> + struct media_pad pad[TUNER_NUM_PADS];
> +#endif
> +
> +};
> +
> +#endif
> --
> 2.7.4
>
@@ -26,6 +26,13 @@ config MEDIA_TUNER_SIMPLE
help
Say Y here to include support for various simple tuners.
+config MEDIA_TUNER_TDA18250
+ tristate "NXP TDA18250 silicon tuner"
+ depends on MEDIA_SUPPORT && I2C
+ default m if !MEDIA_SUBDRV_AUTOSELECT
+ help
+ Say Y here to include support for TDA18250 tuner.
+
config MEDIA_TUNER_TDA8290
tristate "TDA 8290/8295 + 8275(a)/18271 tuner combo"
depends on MEDIA_SUPPORT && I2C
@@ -41,6 +41,7 @@ obj-$(CONFIG_MEDIA_TUNER_R820T) += r820t.o
obj-$(CONFIG_MEDIA_TUNER_MXL301RF) += mxl301rf.o
obj-$(CONFIG_MEDIA_TUNER_QM1D1C0042) += qm1d1c0042.o
obj-$(CONFIG_MEDIA_TUNER_M88RS6000T) += m88rs6000t.o
+obj-$(CONFIG_MEDIA_TUNER_TDA18250) += tda18250.o
ccflags-y += -I$(srctree)/drivers/media/dvb-core
ccflags-y += -I$(srctree)/drivers/media/dvb-frontends
new file mode 100644
@@ -0,0 +1,921 @@
+/*
+ * NXP TDA18250 silicon tuner driver
+ *
+ * Copyright (C) 2017 Olli Salonen <olli.salonen@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include "tda18250_priv.h"
+#include <linux/regmap.h>
+
+static const struct dvb_tuner_ops tda18250_ops;
+
+static int tda18250_power_control(struct dvb_frontend *fe,
+ unsigned int power_state)
+{
+ struct i2c_client *client = fe->tuner_priv;
+ struct tda18250_dev *dev = i2c_get_clientdata(client);
+ int ret;
+ unsigned int utmp;
+
+ dev_dbg(&client->dev, "power state: %d", power_state);
+
+ switch (power_state) {
+ case TDA18250_POWER_NORMAL:
+ ret = regmap_write_bits(dev->regmap, R06_POWER2, 0x07, 0x00);
+ if (ret)
+ goto err;
+ ret = regmap_write_bits(dev->regmap, R25_REF, 0xc0, 0xc0);
+ if (ret)
+ goto err;
+ break;
+ case TDA18250_POWER_STANDBY:
+ if (dev->loopthrough) {
+ ret = regmap_write_bits(dev->regmap, R25_REF, 0xc0, 0x80);
+ if (ret)
+ goto err;
+ ret = regmap_write_bits(dev->regmap, R06_POWER2, 0x07, 0x02);
+ if (ret)
+ goto err;
+ ret = regmap_write_bits(dev->regmap, R10_LT1, 0x80, 0x00);
+ if (ret)
+ goto err;
+ } else {
+ ret = regmap_write_bits(dev->regmap, R25_REF, 0xc0, 0x80);
+ if (ret)
+ goto err;
+ ret = regmap_write_bits(dev->regmap, R06_POWER2, 0x07, 0x01);
+ if (ret)
+ goto err;
+ ret = regmap_read(dev->regmap, R0D_AGC12, &utmp);
+ if (ret)
+ goto err;
+ ret = regmap_write_bits(dev->regmap, R0D_AGC12, 0x03, 0x03);
+ if (ret)
+ goto err;
+ ret = regmap_write_bits(dev->regmap, R10_LT1, 0x80, 0x80);
+ if (ret)
+ goto err;
+ ret = regmap_write_bits(dev->regmap, R0D_AGC12, 0x03, utmp & 0x03);
+ if (ret)
+ goto err;
+ }
+ break;
+ default:
+ ret = -EINVAL;
+ goto err;
+ }
+
+ return 0;
+err:
+ return ret;
+}
+
+static int tda18250_wait_for_irq(struct dvb_frontend *fe,
+ int maxwait, int step, u8 irq)
+{
+ struct i2c_client *client = fe->tuner_priv;
+ struct tda18250_dev *dev = i2c_get_clientdata(client);
+ int ret;
+ unsigned long timeout;
+ bool triggered;
+ unsigned int utmp;
+
+ triggered = false;
+ timeout = jiffies + msecs_to_jiffies(maxwait);
+ while (!time_after(jiffies, timeout)) {
+ // check for the IRQ
+ ret = regmap_read(dev->regmap, R08_IRQ1, &utmp);
+ if (ret)
+ goto err;
+ if ((utmp & irq) == irq) {
+ triggered = true;
+ break;
+ }
+ msleep(step);
+ }
+
+ dev_dbg(&client->dev, "waited IRQ (0x%02x) %d ms, triggered: %s", irq,
+ jiffies_to_msecs(jiffies) -
+ (jiffies_to_msecs(timeout) - maxwait),
+ triggered ? "true" : "false");
+
+ if (!triggered)
+ return -ETIMEDOUT;
+
+ return 0;
+err:
+ return ret;
+}
+
+static int tda18250_init(struct dvb_frontend *fe)
+{
+ struct i2c_client *client = fe->tuner_priv;
+ struct tda18250_dev *dev = i2c_get_clientdata(client);
+ int ret, i;
+
+ /* default values for various regs */
+ static const u8 init_regs[][2] = {
+ { R0C_AGC11, 0xc7 },
+ { R0D_AGC12, 0x5d },
+ { R0E_AGC13, 0x40 },
+ { R0F_AGC14, 0x0e },
+ { R10_LT1, 0x47 },
+ { R11_LT2, 0x4e },
+ { R12_AGC21, 0x26 },
+ { R13_AGC22, 0x60 },
+ { R18_AGC32, 0x37 },
+ { R19_AGC33, 0x09 },
+ { R1A_AGCK, 0x00 },
+ { R1E_WI_FI, 0x29 },
+ { R1F_RF_BPF, 0x06 },
+ { R20_IR_MIX, 0xc6 },
+ { R21_IF_AGC, 0x00 },
+ { R2C_PS1, 0x75 },
+ { R2D_PS2, 0x06 },
+ { R2E_PS3, 0x07 },
+ { R30_RSSI2, 0x0e },
+ { R31_IRQ_CTRL, 0x00 },
+ { R39_SD5, 0x00 },
+ { R3B_REGU, 0x55 },
+ { R3C_RCCAL1, 0xa7 },
+ { R3F_IRCAL2, 0x85 },
+ { R40_IRCAL3, 0x87 },
+ { R41_IRCAL4, 0xc0 },
+ { R43_PD1, 0x40 },
+ { R44_PD2, 0xc0 },
+ { R46_CPUMP, 0x0c },
+ { R47_LNAPOL, 0x64 },
+ { R4B_XTALOSC1, 0x30 },
+ { R59_AGC2_UP2, 0x05 },
+ { R5B_AGC_AUTO, 0x07 },
+ { R5C_AGC_DEBUG, 0x00 },
+ };
+
+ /* crystal related regs depend on frequency */
+ static const u8 xtal_regs[][5] = {
+ /* reg: 4d 4e 4f 50 51 */
+ [TDA18250_XTAL_FREQ_16MHZ] = { 0x3e, 0x80, 0x50, 0x00, 0x20 },
+ [TDA18250_XTAL_FREQ_24MHZ] = { 0x5d, 0xc0, 0xec, 0x00, 0x18 },
+ [TDA18250_XTAL_FREQ_25MHZ] = { 0x61, 0xa8, 0xec, 0x80, 0x19 },
+ [TDA18250_XTAL_FREQ_27MHZ] = { 0x69, 0x78, 0x8d, 0x80, 0x1b },
+ [TDA18250_XTAL_FREQ_30MHZ] = { 0x75, 0x30, 0x8f, 0x00, 0x1e },
+ };
+
+ dev_dbg(&client->dev, "\n");
+
+ ret = tda18250_power_control(fe, TDA18250_POWER_NORMAL);
+ if (ret)
+ goto err;
+
+ msleep(20);
+
+ if (dev->warm)
+ goto warm;
+
+ /* set initial register values */
+ for (i = 0; i < ARRAY_SIZE(init_regs); i++) {
+ ret = regmap_write(dev->regmap, init_regs[i][0],
+ init_regs[i][1]);
+ if (ret)
+ goto err;
+ }
+
+ /* set xtal related regs */
+ ret = regmap_bulk_write(dev->regmap, R4D_XTALFLX1,
+ xtal_regs[dev->xtal_freq], 5);
+ if (ret)
+ goto err;
+
+ ret = regmap_write_bits(dev->regmap, R10_LT1, 0x80,
+ dev->loopthrough ? 0x00 : 0x80);
+ if (ret)
+ goto err;
+
+ /* clear IRQ */
+ ret = regmap_write(dev->regmap, R0A_IRQ3, TDA18250_IRQ_HW_INIT);
+ if (ret)
+ goto err;
+
+ /* start HW init */
+ ret = regmap_write(dev->regmap, R2A_MSM1, 0x70);
+ if (ret)
+ goto err;
+
+ ret = regmap_write(dev->regmap, R2B_MSM2, 0x01);
+ if (ret)
+ goto err;
+
+ ret = tda18250_wait_for_irq(fe, 500, 10, TDA18250_IRQ_HW_INIT);
+ if (ret)
+ goto err;
+
+ /* tuner calibration */
+ ret = regmap_write(dev->regmap, R2A_MSM1, 0x02);
+ if (ret)
+ goto err;
+
+ ret = regmap_write(dev->regmap, R2B_MSM2, 0x01);
+ if (ret)
+ goto err;
+
+ ret = tda18250_wait_for_irq(fe, 500, 10, TDA18250_IRQ_CAL);
+ if (ret)
+ goto err;
+
+ dev->warm = true;
+
+warm:
+ /* power up LNA */
+ ret = regmap_write_bits(dev->regmap, R0C_AGC11, 0x80, 0x00);
+ if (ret)
+ goto err;
+
+ return 0;
+err:
+ dev_dbg(&client->dev, "failed=%d", ret);
+ return ret;
+}
+
+static int tda18250_set_agc(struct dvb_frontend *fe)
+{
+ struct i2c_client *client = fe->tuner_priv;
+ struct tda18250_dev *dev = i2c_get_clientdata(client);
+ struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+ int ret;
+ u8 utmp, utmp2;
+
+ dev_dbg(&client->dev, "\n");
+
+ ret = regmap_write_bits(dev->regmap, R1F_RF_BPF, 0x87, 0x06);
+ if (ret)
+ goto err;
+
+ utmp = ((c->frequency < 100000000) &&
+ ((c->delivery_system == SYS_DVBC_ANNEX_A) ||
+ (c->delivery_system == SYS_DVBC_ANNEX_C)) &&
+ (c->bandwidth_hz == 6000000)) ? 0x80 : 0x00;
+ ret = regmap_write(dev->regmap, R5A_H3H5, utmp);
+ if (ret)
+ goto err;
+
+ /* AGC1 */
+ switch (c->delivery_system) {
+ case SYS_ATSC:
+ case SYS_DVBT:
+ case SYS_DVBT2:
+ utmp = 4;
+ break;
+ default: /* DVB-C/QAM */
+ switch (c->bandwidth_hz) {
+ case 6000000:
+ utmp = (c->frequency < 800000000) ? 6 : 4;
+ break;
+ default: /* 7.935 and 8 MHz */
+ utmp = (c->frequency < 100000000) ? 2 : 3;
+ break;
+ }
+ break;
+ }
+
+ ret = regmap_write_bits(dev->regmap, R0C_AGC11, 0x07, utmp);
+ if (ret)
+ goto err;
+
+ /* AGC2 */
+ switch (c->delivery_system) {
+ case SYS_ATSC:
+ case SYS_DVBT:
+ case SYS_DVBT2:
+ utmp = (c->frequency < 320000000) ? 20 : 16;
+ utmp2 = (c->frequency < 320000000) ? 22 : 18;
+ break;
+ default: /* DVB-C/QAM */
+ switch (c->bandwidth_hz) {
+ case 6000000:
+ if (c->frequency < 600000000) {
+ utmp = 18;
+ utmp2 = 22;
+ } else if (c->frequency < 800000000) {
+ utmp = 16;
+ utmp2 = 20;
+ } else {
+ utmp = 14;
+ utmp2 = 16;
+ }
+ break;
+ default: /* 7.935 and 8 MHz */
+ utmp = (c->frequency < 320000000) ? 16 : 18;
+ utmp2 = (c->frequency < 320000000) ? 18 : 20;
+ break;
+ }
+ break;
+ }
+ ret = regmap_write_bits(dev->regmap, R58_AGC2_UP1, 0x1f, utmp2+8);
+ if (ret)
+ goto err;
+ ret = regmap_write_bits(dev->regmap, R13_AGC22, 0x1f, utmp);
+ if (ret)
+ goto err;
+ ret = regmap_write_bits(dev->regmap, R14_AGC23, 0x1f, utmp2);
+ if (ret)
+ goto err;
+
+ switch (c->delivery_system) {
+ case SYS_ATSC:
+ case SYS_DVBT:
+ case SYS_DVBT2:
+ utmp = 98;
+ break;
+ default: /* DVB-C/QAM */
+ utmp = 90;
+ break;
+ }
+ ret = regmap_write_bits(dev->regmap, R16_AGC25, 0xf8, utmp);
+ if (ret)
+ goto err;
+
+ ret = regmap_write_bits(dev->regmap, R12_AGC21, 0x60,
+ (c->frequency > 800000000) ? 0x40 : 0x20);
+ if (ret)
+ goto err;
+
+ /* AGC3 */
+ switch (c->delivery_system) {
+ case SYS_ATSC:
+ case SYS_DVBT:
+ case SYS_DVBT2:
+ utmp = (c->frequency < 320000000) ? 5 : 7;
+ utmp2 = (c->frequency < 320000000) ? 10 : 12;
+ break;
+ default: /* DVB-C/QAM */
+ utmp = 7;
+ utmp2 = 12;
+ break;
+ }
+ ret = regmap_write(dev->regmap, R17_AGC31, (utmp << 4) | utmp2);
+ if (ret)
+ goto err;
+
+ /* S2D */
+ switch (c->delivery_system) {
+ case SYS_ATSC:
+ case SYS_DVBT:
+ case SYS_DVBT2:
+ if (c->bandwidth_hz == 8000000)
+ utmp = 0x04;
+ else
+ utmp = (c->frequency < 320000000) ? 0x04 : 0x02;
+ break;
+ default: /* DVB-C/QAM */
+ if (c->bandwidth_hz == 6000000)
+ utmp = ((c->frequency > 172544000) &&
+ (c->frequency < 320000000)) ? 0x04 : 0x02;
+ else /* 7.935 and 8 MHz */
+ utmp = ((c->frequency > 320000000) &&
+ (c->frequency < 600000000)) ? 0x02 : 0x04;
+ break;
+ }
+ ret = regmap_write_bits(dev->regmap, R20_IR_MIX, 0x06, utmp);
+ if (ret)
+ goto err;
+
+ switch (c->delivery_system) {
+ case SYS_ATSC:
+ case SYS_DVBT:
+ case SYS_DVBT2:
+ utmp = 0;
+ break;
+ default: /* DVB-C/QAM */
+ utmp = (c->frequency < 600000000) ? 0 : 3;
+ break;
+ }
+ ret = regmap_write_bits(dev->regmap, R16_AGC25, 0x03, utmp);
+ if (ret)
+ goto err;
+
+ utmp = 0x09;
+ switch (c->delivery_system) {
+ case SYS_ATSC:
+ case SYS_DVBT:
+ case SYS_DVBT2:
+ if (c->bandwidth_hz == 8000000)
+ utmp = 0x0c;
+ break;
+ default: /* DVB-C/QAM */
+ utmp = 0x0c;
+ break;
+ }
+ ret = regmap_write_bits(dev->regmap, R0F_AGC14, 0x3f, utmp);
+ if (ret)
+ goto err;
+
+ return 0;
+err:
+ dev_dbg(&client->dev, "failed=%d", ret);
+ return ret;
+}
+
+static int tda18250_pll_calc(struct dvb_frontend *fe, u8 *rdiv,
+ u8 *ndiv, u8 *icp)
+{
+ struct i2c_client *client = fe->tuner_priv;
+ struct tda18250_dev *dev = i2c_get_clientdata(client);
+ struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+ int ret;
+ unsigned int uval, exp, lopd, scale;
+ unsigned long fvco;
+
+ ret = regmap_read(dev->regmap, R34_MD1, &uval);
+ if (ret)
+ goto err;
+
+ exp = (uval & 0x70) >> 4;
+ if (exp > 5)
+ exp = 0;
+ lopd = 1 << (exp - 1);
+ scale = uval & 0x0f;
+ fvco = lopd * scale * ((c->frequency / 1000) + dev->if_frequency);
+
+ switch (dev->xtal_freq) {
+ case TDA18250_XTAL_FREQ_16MHZ:
+ *rdiv = 1;
+ *ndiv = 0;
+ *icp = (fvco < 6622000) ? 0x05 : 0x02;
+ break;
+ case TDA18250_XTAL_FREQ_24MHZ:
+ case TDA18250_XTAL_FREQ_25MHZ:
+ *rdiv = 3;
+ *ndiv = 1;
+ *icp = (fvco < 6622000) ? 0x05 : 0x02;
+ break;
+ case TDA18250_XTAL_FREQ_27MHZ:
+ if (fvco < 6643000) {
+ *rdiv = 2;
+ *ndiv = 0;
+ *icp = 0x05;
+ } else if (fvco < 6811000) {
+ *rdiv = 2;
+ *ndiv = 0;
+ *icp = 0x06;
+ } else {
+ *rdiv = 3;
+ *ndiv = 1;
+ *icp = 0x02;
+ }
+ break;
+ case TDA18250_XTAL_FREQ_30MHZ:
+ *rdiv = 2;
+ *ndiv = 0;
+ *icp = (fvco < 6811000) ? 0x05 : 0x02;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ dev_dbg(&client->dev,
+ "lopd=%d scale=%u fvco=%lu, rdiv=%d ndiv=%d icp=%d",
+ lopd, scale, fvco, *rdiv, *ndiv, *icp);
+ return 0;
+err:
+ return ret;
+}
+
+static int tda18250_set_params(struct dvb_frontend *fe)
+{
+ struct i2c_client *client = fe->tuner_priv;
+ struct tda18250_dev *dev = i2c_get_clientdata(client);
+ struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+ u32 if_khz;
+ int ret;
+ unsigned int i, j;
+ u8 utmp;
+ u8 buf[3];
+
+ #define REG 0
+ #define MASK 1
+ #define DVBT_6 2
+ #define DVBT_7 3
+ #define DVBT_8 4
+ #define DVBC_6 5
+ #define DVBC_8 6
+ #define ATSC 7
+
+ static const u8 delsys_params[][16] = {
+ [REG] = { 0x22, 0x23, 0x24, 0x21, 0x0d, 0x0c, 0x0f, 0x14,
+ 0x0e, 0x12, 0x58, 0x59, 0x1a, 0x19, 0x1e, 0x30 },
+ [MASK] = { 0x77, 0xff, 0xff, 0x87, 0xf0, 0x78, 0x07, 0xe0,
+ 0x60, 0x0f, 0x60, 0x0f, 0x33, 0x30, 0x80, 0x06 },
+ [DVBT_6] = { 0x51, 0x03, 0x83, 0x82, 0x40, 0x48, 0x01, 0xe0,
+ 0x60, 0x0f, 0x60, 0x05, 0x03, 0x10, 0x00, 0x04 },
+ [DVBT_7] = { 0x52, 0x03, 0x85, 0x82, 0x40, 0x48, 0x01, 0xe0,
+ 0x60, 0x0f, 0x60, 0x05, 0x03, 0x10, 0x00, 0x04 },
+ [DVBT_8] = { 0x53, 0x03, 0x87, 0x82, 0x40, 0x48, 0x06, 0xe0,
+ 0x60, 0x07, 0x60, 0x05, 0x03, 0x10, 0x00, 0x04 },
+ [DVBC_6] = { 0x32, 0x05, 0x86, 0x82, 0x50, 0x00, 0x06, 0x60,
+ 0x40, 0x0e, 0x60, 0x05, 0x33, 0x10, 0x00, 0x04 },
+ [DVBC_8] = { 0x53, 0x03, 0x88, 0x82, 0x50, 0x00, 0x06, 0x60,
+ 0x40, 0x0e, 0x60, 0x05, 0x33, 0x10, 0x00, 0x04 },
+ [ATSC] = { 0x51, 0x03, 0x83, 0x82, 0x40, 0x48, 0x01, 0xe0,
+ 0x40, 0x0e, 0x60, 0x05, 0x03, 0x00, 0x80, 0x04 },
+ };
+
+ dev_dbg(&client->dev,
+ "delivery_system=%d frequency=%u bandwidth_hz=%u",
+ c->delivery_system, c->frequency, c->bandwidth_hz);
+
+
+ switch (c->delivery_system) {
+ case SYS_ATSC:
+ j = ATSC;
+ if_khz = dev->if_atsc;
+ break;
+ case SYS_DVBT:
+ case SYS_DVBT2:
+ if (c->bandwidth_hz == 0) {
+ ret = -EINVAL;
+ goto err;
+ } else if (c->bandwidth_hz <= 6000000) {
+ j = DVBT_6;
+ if_khz = dev->if_dvbt_6;
+ } else if (c->bandwidth_hz <= 7000000) {
+ j = DVBT_7;
+ if_khz = dev->if_dvbt_7;
+ } else if (c->bandwidth_hz <= 8000000) {
+ j = DVBT_8;
+ if_khz = dev->if_dvbt_8;
+ } else {
+ ret = -EINVAL;
+ goto err;
+ }
+ break;
+ case SYS_DVBC_ANNEX_A:
+ case SYS_DVBC_ANNEX_C:
+ if (c->bandwidth_hz == 0) {
+ ret = -EINVAL;
+ goto err;
+ } else if (c->bandwidth_hz <= 6000000) {
+ j = DVBC_6;
+ if_khz = dev->if_dvbc_6;
+ } else if (c->bandwidth_hz <= 8000000) {
+ j = DVBC_8;
+ if_khz = dev->if_dvbc_8;
+ } else {
+ ret = -EINVAL;
+ goto err;
+ }
+ break;
+ default:
+ ret = -EINVAL;
+ dev_err(&client->dev, "unsupported delivery system=%d",
+ c->delivery_system);
+ goto err;
+ }
+
+ /* set delivery system dependent registers */
+ for (i = 0; i < 16; i++) {
+ ret = regmap_write_bits(dev->regmap, delsys_params[REG][i],
+ delsys_params[MASK][i], delsys_params[j][i]);
+ if (ret)
+ goto err;
+ }
+
+ /* set IF if needed */
+ if (dev->if_frequency != if_khz) {
+ utmp = DIV_ROUND_CLOSEST(if_khz, 50);
+ ret = regmap_write(dev->regmap, R26_IF, utmp);
+ if (ret)
+ goto err;
+ dev->if_frequency = if_khz;
+ dev_dbg(&client->dev, "set IF=%u kHz", if_khz);
+
+ }
+
+ ret = tda18250_set_agc(fe);
+ if (ret)
+ goto err;
+
+ ret = regmap_write_bits(dev->regmap, R1A_AGCK, 0x03, 0x01);
+ if (ret)
+ goto err;
+
+ ret = regmap_write_bits(dev->regmap, R14_AGC23, 0x40, 0x00);
+ if (ret)
+ goto err;
+
+ /* set frequency */
+ buf[0] = ((c->frequency / 1000) >> 16) & 0xff;
+ buf[1] = ((c->frequency / 1000) >> 8) & 0xff;
+ buf[2] = ((c->frequency / 1000) >> 0) & 0xff;
+ ret = regmap_bulk_write(dev->regmap, R27_RF1, buf, 3);
+ if (ret)
+ goto err;
+
+ ret = regmap_write(dev->regmap, R0A_IRQ3, TDA18250_IRQ_TUNE);
+ if (ret)
+ goto err;
+
+ /* initial tune */
+ ret = regmap_write(dev->regmap, R2A_MSM1, 0x01);
+ if (ret)
+ goto err;
+
+ ret = regmap_write(dev->regmap, R2B_MSM2, 0x01);
+ if (ret)
+ goto err;
+
+ ret = tda18250_wait_for_irq(fe, 500, 10, TDA18250_IRQ_TUNE);
+ if (ret)
+ goto err;
+
+ /* calc ndiv and rdiv */
+ ret = tda18250_pll_calc(fe, &buf[0], &buf[1], &buf[2]);
+ if (ret)
+ goto err;
+
+ ret = regmap_write_bits(dev->regmap, R4F_XTALFLX3, 0xe0,
+ (buf[0] << 6) | (buf[1] << 5));
+ if (ret)
+ goto err;
+
+ /* clear IRQ */
+ ret = regmap_write(dev->regmap, R0A_IRQ3, TDA18250_IRQ_TUNE);
+ if (ret)
+ goto err;
+
+ ret = regmap_write_bits(dev->regmap, R46_CPUMP, 0x07, 0x00);
+ if (ret)
+ goto err;
+
+ ret = regmap_write_bits(dev->regmap, R39_SD5, 0x03, 0x00);
+ if (ret)
+ goto err;
+
+ /* tune again */
+ ret = regmap_write(dev->regmap, R2A_MSM1, 0x01); /* tune */
+ if (ret)
+ goto err;
+
+ ret = regmap_write(dev->regmap, R2B_MSM2, 0x01); /* go */
+ if (ret)
+ goto err;
+
+ ret = tda18250_wait_for_irq(fe, 500, 10, TDA18250_IRQ_TUNE);
+ if (ret)
+ goto err;
+
+ /* pll locking */
+ msleep(5);
+
+ ret = regmap_write_bits(dev->regmap, R2B_MSM2, 0x04, 0x04);
+ if (ret)
+ goto err;
+
+ msleep(20);
+
+ /* restore AGCK */
+ ret = regmap_write_bits(dev->regmap, R1A_AGCK, 0x03, 0x03);
+ if (ret)
+ goto err;
+
+ ret = regmap_write_bits(dev->regmap, R14_AGC23, 0x40, 0x40);
+ if (ret)
+ goto err;
+
+ /* charge pump */
+ ret = regmap_write_bits(dev->regmap, R46_CPUMP, 0x07, buf[2]);
+
+ return 0;
+err:
+ return ret;
+}
+
+static int tda18250_get_if_frequency(struct dvb_frontend *fe, u32 *frequency)
+{
+ struct i2c_client *client = fe->tuner_priv;
+ struct tda18250_dev *dev = i2c_get_clientdata(client);
+
+ *frequency = dev->if_frequency * 1000;
+ return 0;
+}
+
+static int tda18250_sleep(struct dvb_frontend *fe)
+{
+ struct i2c_client *client = fe->tuner_priv;
+ struct tda18250_dev *dev = i2c_get_clientdata(client);
+ int ret;
+
+ dev_dbg(&client->dev, "\n");
+
+ /* power down LNA */
+ ret = regmap_write_bits(dev->regmap, R0C_AGC11, 0x80, 0x00);
+ if (ret)
+ return ret;
+
+ ret = tda18250_power_control(fe, TDA18250_POWER_STANDBY);
+ return ret;
+}
+
+static const struct dvb_tuner_ops tda18250_ops = {
+ .info = {
+ .name = "NXP TDA18250",
+ .frequency_min = 42000000,
+ .frequency_max = 870000000,
+ },
+
+ .init = tda18250_init,
+ .set_params = tda18250_set_params,
+ .get_if_frequency = tda18250_get_if_frequency,
+ .sleep = tda18250_sleep,
+};
+
+static int tda18250_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct tda18250_config *cfg = client->dev.platform_data;
+ struct dvb_frontend *fe = cfg->fe;
+ struct tda18250_dev *dev;
+ int ret;
+ unsigned char chip_id[3];
+
+ /* some registers are always read from HW */
+ static const struct regmap_range tda18250_yes_ranges[] = {
+ regmap_reg_range(R05_POWER1, R0B_IRQ4),
+ regmap_reg_range(R21_IF_AGC, R21_IF_AGC),
+ regmap_reg_range(R2A_MSM1, R2B_MSM2),
+ regmap_reg_range(R2F_RSSI1, R31_IRQ_CTRL),
+ };
+
+ static const struct regmap_access_table tda18250_volatile_table = {
+ .yes_ranges = tda18250_yes_ranges,
+ .n_yes_ranges = ARRAY_SIZE(tda18250_yes_ranges),
+ };
+
+ static const struct regmap_config tda18250_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = TDA18250_NUM_REGS - 1,
+ .volatile_table = &tda18250_volatile_table,
+ };
+
+ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+ if (!dev) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ i2c_set_clientdata(client, dev);
+
+ dev->fe = cfg->fe;
+ dev->loopthrough = cfg->loopthrough;
+ if (cfg->xtal_freq < TDA18250_XTAL_FREQ_MAX) {
+ dev->xtal_freq = cfg->xtal_freq;
+ } else {
+ ret = -EINVAL;
+ dev_err(&client->dev, "xtal_freq invalid=%d", cfg->xtal_freq);
+ goto err_kfree;
+ }
+ dev->if_dvbt_6 = cfg->if_dvbt_6;
+ dev->if_dvbt_7 = cfg->if_dvbt_7;
+ dev->if_dvbt_8 = cfg->if_dvbt_8;
+ dev->if_dvbc_6 = cfg->if_dvbc_6;
+ dev->if_dvbc_8 = cfg->if_dvbc_8;
+ dev->if_atsc = cfg->if_atsc;
+
+ dev->if_frequency = 0;
+ dev->warm = false;
+
+ dev->regmap = devm_regmap_init_i2c(client, &tda18250_regmap_config);
+ if (IS_ERR(dev->regmap)) {
+ ret = PTR_ERR(dev->regmap);
+ goto err_kfree;
+ }
+
+ /* read the three chip ID registers */
+ regmap_bulk_read(dev->regmap, R00_ID1, &chip_id, 3);
+ dev_dbg(&client->dev, "chip_id=%02x:%02x:%02x",
+ chip_id[0], chip_id[1], chip_id[2]);
+
+ switch (chip_id[0]) {
+ case 0xc7:
+ dev->slave = false;
+ break;
+ case 0x47:
+ dev->slave = true;
+ break;
+ default:
+ ret = -ENODEV;
+ goto err_kfree;
+ }
+
+ if (chip_id[1] != 0x4a) {
+ ret = -ENODEV;
+ goto err_kfree;
+ }
+
+ switch (chip_id[2]) {
+ case 0x20:
+ dev_info(&client->dev,
+ "NXP TDA18250AHN/%s successfully identified",
+ dev->slave ? "S" : "M");
+ break;
+ case 0x21:
+ dev_info(&client->dev,
+ "NXP TDA18250BHN/%s successfully identified",
+ dev->slave ? "S" : "M");
+ break;
+ default:
+ ret = -ENODEV;
+ goto err_kfree;
+ }
+
+ fe->tuner_priv = client;
+ memcpy(&fe->ops.tuner_ops, &tda18250_ops,
+ sizeof(struct dvb_tuner_ops));
+
+ /* media controller */
+#ifdef CONFIG_MEDIA_CONTROLLER
+ if (cfg->mdev) {
+ dev->mdev = cfg->mdev;
+
+ dev->ent.name = KBUILD_MODNAME;
+ dev->ent.function = MEDIA_ENT_F_TUNER;
+
+ dev->pad[TUNER_PAD_RF_INPUT].flags = MEDIA_PAD_FL_SINK;
+ dev->pad[TUNER_PAD_OUTPUT].flags = MEDIA_PAD_FL_SOURCE;
+ dev->pad[TUNER_PAD_AUD_OUT].flags = MEDIA_PAD_FL_SOURCE;
+
+ ret = media_entity_pads_init(&dev->ent, TUNER_NUM_PADS,
+ &dev->pad[0]);
+
+ if (ret)
+ goto err_kfree;
+
+ ret = media_device_register_entity(cfg->mdev, &dev->ent);
+ if (ret) {
+ media_entity_cleanup(&dev->ent);
+ goto err_kfree;
+ }
+ }
+#endif
+
+ /* put the tuner in standby */
+ tda18250_power_control(fe, TDA18250_POWER_STANDBY);
+
+ return 0;
+err_kfree:
+ kfree(dev);
+err:
+ dev_dbg(&client->dev, "failed=%d", ret);
+ return ret;
+}
+
+static int tda18250_remove(struct i2c_client *client)
+{
+ struct tda18250_dev *dev = i2c_get_clientdata(client);
+ struct dvb_frontend *fe = dev->fe;
+
+ dev_dbg(&client->dev, "\n");
+
+#ifdef CONFIG_MEDIA_CONTROLLER_DVB
+ if (dev->mdev)
+ media_device_unregister_entity(&dev->ent);
+#endif
+
+ memset(&fe->ops.tuner_ops, 0, sizeof(struct dvb_tuner_ops));
+ fe->tuner_priv = NULL;
+ kfree(dev);
+
+ return 0;
+}
+
+static const struct i2c_device_id tda18250_id_table[] = {
+ {"tda18250", 0},
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, tda18250_id_table);
+
+static struct i2c_driver tda18250_driver = {
+ .driver = {
+ .name = "tda18250",
+ },
+ .probe = tda18250_probe,
+ .remove = tda18250_remove,
+ .id_table = tda18250_id_table,
+};
+
+module_i2c_driver(tda18250_driver);
+
+MODULE_DESCRIPTION("NXP TDA18250 silicon tuner driver");
+MODULE_AUTHOR("Olli Salonen <olli.salonen@iki.fi>");
+MODULE_LICENSE("GPL");
new file mode 100644
@@ -0,0 +1,51 @@
+/*
+ * NXP TDA18250BHN silicon tuner driver
+ *
+ * Copyright (C) 2017 Olli Salonen <olli.salonen@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef TDA18250_H
+#define TDA18250_H
+
+#include <linux/kconfig.h>
+#include <media/media-device.h>
+#include "dvb_frontend.h"
+
+#define TDA18250_XTAL_FREQ_16MHZ 0
+#define TDA18250_XTAL_FREQ_24MHZ 1
+#define TDA18250_XTAL_FREQ_25MHZ 2
+#define TDA18250_XTAL_FREQ_27MHZ 3
+#define TDA18250_XTAL_FREQ_30MHZ 4
+#define TDA18250_XTAL_FREQ_MAX 5
+
+struct tda18250_config {
+ u16 if_dvbt_6;
+ u16 if_dvbt_7;
+ u16 if_dvbt_8;
+ u16 if_dvbc_6;
+ u16 if_dvbc_8;
+ u16 if_atsc;
+ u8 xtal_freq;
+ bool loopthrough;
+
+ /*
+ * frontend
+ */
+ struct dvb_frontend *fe;
+
+#if defined(CONFIG_MEDIA_CONTROLLER)
+ struct media_device *mdev;
+#endif
+};
+
+#endif
new file mode 100644
@@ -0,0 +1,153 @@
+/*
+ * NXP TDA18250BHN silicon tuner driver
+ *
+ * Copyright (C) 2017 Olli Salonen <olli.salonen@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef TDA18250_PRIV_H
+#define TDA18250_PRIV_H
+
+#include "tda18250.h"
+#include <media/v4l2-mc.h>
+
+#define R00_ID1 0x00 /* ID byte 1 */
+#define R01_ID2 0x01 /* ID byte 2 */
+#define R02_ID3 0x02 /* ID byte 3 */
+#define R03_THERMO1 0x03 /* Thermo byte 1 */
+#define R04_THERMO2 0x04 /* Thermo byte 2 */
+#define R05_POWER1 0x05 /* Power byte 1 */
+#define R06_POWER2 0x06 /* Power byte 2 */
+#define R07_GPIO 0x07 /* GPIO */
+#define R08_IRQ1 0x08 /* IRQ */
+#define R09_IRQ2 0x09 /* IRQ */
+#define R0A_IRQ3 0x0a /* IRQ */
+#define R0B_IRQ4 0x0b /* IRQ */
+#define R0C_AGC11 0x0c /* AGC1 byte 1 */
+#define R0D_AGC12 0x0d /* AGC1 byte 2 */
+#define R0E_AGC13 0x0e /* AGC1 byte 3 */
+#define R0F_AGC14 0x0f /* AGC1 byte 4 */
+#define R10_LT1 0x10 /* LT byte 1 */
+#define R11_LT2 0x11 /* LT byte 2 */
+#define R12_AGC21 0x12 /* AGC2 byte 1 */
+#define R13_AGC22 0x13 /* AGC2 byte 2 */
+#define R14_AGC23 0x14 /* AGC2 byte 3 */
+#define R15_AGC24 0x15 /* AGC2 byte 4 */
+#define R16_AGC25 0x16 /* AGC2 byte 5 */
+#define R17_AGC31 0x17 /* AGC3 byte 1 */
+#define R18_AGC32 0x18 /* AGC3 byte 2 */
+#define R19_AGC33 0x19 /* AGC3 byte 3 */
+#define R1A_AGCK 0x1a
+#define R1B_GAIN1 0x1b
+#define R1C_GAIN2 0x1c
+#define R1D_GAIN3 0x1d
+#define R1E_WI_FI 0x1e /* Wireless Filter */
+#define R1F_RF_BPF 0x1f /* RF Band Pass Filter */
+#define R20_IR_MIX 0x20 /* IR Mixer */
+#define R21_IF_AGC 0x21
+#define R22_IF1 0x22 /* IF byte 1 */
+#define R23_IF2 0x23 /* IF byte 2 */
+#define R24_IF3 0x24 /* IF byte 3 */
+#define R25_REF 0x25 /* reference byte */
+#define R26_IF 0x26 /* IF frequency */
+#define R27_RF1 0x27 /* RF frequency byte 1 */
+#define R28_RF2 0x28 /* RF frequency byte 2 */
+#define R29_RF3 0x29 /* RF frequency byte 3 */
+#define R2A_MSM1 0x2a
+#define R2B_MSM2 0x2b
+#define R2C_PS1 0x2c /* power saving mode byte 1 */
+#define R2D_PS2 0x2d /* power saving mode byte 2 */
+#define R2E_PS3 0x2e /* power saving mode byte 3 */
+#define R2F_RSSI1 0x2f
+#define R30_RSSI2 0x30
+#define R31_IRQ_CTRL 0x31
+#define R32_DUMMY 0x32
+#define R33_TEST 0x33
+#define R34_MD1 0x34
+#define R35_SD1 0x35
+#define R36_SD2 0x36
+#define R37_SD3 0x37
+#define R38_SD4 0x38
+#define R39_SD5 0x39
+#define R3A_SD_TEST 0x3a
+#define R3B_REGU 0x3b
+#define R3C_RCCAL1 0x3c
+#define R3D_RCCAL2 0x3d
+#define R3E_IRCAL1 0x3e
+#define R3F_IRCAL2 0x3f
+#define R40_IRCAL3 0x40
+#define R41_IRCAL4 0x41
+#define R42_IRCAL5 0x42
+#define R43_PD1 0x43 /* power down byte 1 */
+#define R44_PD2 0x44 /* power down byte 2 */
+#define R45_PD 0x45 /* power down */
+#define R46_CPUMP 0x46 /* charge pump */
+#define R47_LNAPOL 0x47 /* LNA polar casc */
+#define R48_SMOOTH1 0x48 /* smooth test byte 1 */
+#define R49_SMOOTH2 0x49 /* smooth test byte 2 */
+#define R4A_SMOOTH3 0x4a /* smooth test byte 3 */
+#define R4B_XTALOSC1 0x4b
+#define R4C_XTALOSC2 0x4c
+#define R4D_XTALFLX1 0x4d
+#define R4E_XTALFLX2 0x4e
+#define R4F_XTALFLX3 0x4f
+#define R50_XTALFLX4 0x50
+#define R51_XTALFLX5 0x51
+#define R52_IRLOOP0 0x52
+#define R53_IRLOOP1 0x53
+#define R54_IRLOOP2 0x54
+#define R55_IRLOOP3 0x55
+#define R56_IRLOOP4 0x56
+#define R57_PLL_LOG 0x57
+#define R58_AGC2_UP1 0x58
+#define R59_AGC2_UP2 0x59
+#define R5A_H3H5 0x5a
+#define R5B_AGC_AUTO 0x5b
+#define R5C_AGC_DEBUG 0x5c
+
+#define TDA18250_NUM_REGS 93
+
+#define TDA18250_POWER_STANDBY 0
+#define TDA18250_POWER_NORMAL 1
+
+#define TDA18250_IRQ_CAL 0x81
+#define TDA18250_IRQ_HW_INIT 0x82
+#define TDA18250_IRQ_TUNE 0x88
+
+struct tda18250_dev {
+ struct mutex i2c_mutex;
+ struct dvb_frontend *fe;
+ struct i2c_adapter *i2c;
+ struct regmap *regmap;
+ u8 xtal_freq;
+ /* IF in kHz */
+ u16 if_dvbt_6;
+ u16 if_dvbt_7;
+ u16 if_dvbt_8;
+ u16 if_dvbc_6;
+ u16 if_dvbc_8;
+ u16 if_atsc;
+ u16 if_frequency;
+ bool slave;
+ bool loopthrough;
+ bool warm;
+ u8 regs[TDA18250_NUM_REGS];
+
+#if defined(CONFIG_MEDIA_CONTROLLER)
+ struct media_device *mdev;
+ struct media_entity ent;
+ struct media_pad pad[TUNER_NUM_PADS];
+#endif
+
+};
+
+#endif