[3/9,media] tvp5150: determine BT.656 or YUV 4:2:2 mode from device tree
Commit Message
From: Philipp Zabel <p.zabel@pengutronix.de>
By looking at the endpoint flags, it can be determined whether the link
should be of V4L2_MBUS_PARALLEL or V4L2_MBUS_BT656 type. Disable the
dedicated HSYNC/VSYNC outputs in BT.656 mode.
For devices that are not instantiated through DT the current behavior
is preserved.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
---
drivers/media/i2c/tvp5150.c | 34 ++++++++++++++++++++++++++++++++--
1 file changed, 32 insertions(+), 2 deletions(-)
@@ -11,10 +11,12 @@
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/regmap.h>
+#include <linux/of_graph.h>
#include <media/v4l2-async.h>
#include <media/v4l2-device.h>
#include <media/tvp5150.h>
#include <media/v4l2-ctrls.h>
+#include <media/v4l2-of.h>
#include "tvp5150_reg.h"
@@ -38,6 +40,7 @@ struct tvp5150 {
struct v4l2_subdev sd;
struct media_pad pad;
struct v4l2_ctrl_handler hdl;
+ enum v4l2_mbus_type bus_type;
struct v4l2_mbus_framefmt format;
struct v4l2_rect rect;
struct regmap *regmap;
@@ -424,8 +427,6 @@ static const struct i2c_reg_value tvp5150_init_enable[] = {
TVP5150_MISC_CTL, 0x6f
},{ /* Activates video std autodetection for all standards */
TVP5150_AUTOSW_MSK, 0x0
- },{ /* Default format: 0x47. For 4:2:2: 0x40 */
- TVP5150_DATA_RATE_SEL, 0x47
},{
TVP5150_CHROMA_PROC_CTL_1, 0x0c
},{
@@ -760,6 +761,25 @@ static int tvp5150_reset(struct v4l2_subdev *sd, u32 val)
/* Initializes TVP5150 to stream enabled values */
tvp5150_write_inittab(sd, tvp5150_init_enable);
+ switch (decoder->bus_type) {
+ case V4L2_MBUS_BT656:
+ /* 8-bit ITU BT.656 */
+ regmap_update_bits(decoder->regmap, TVP5150_DATA_RATE_SEL,
+ 0x7, 0x7);
+ /* disable HSYNC, VSYNC/PALI, AVID, and FID/GLCO */
+ regmap_update_bits(decoder->regmap, TVP5150_MISC_CTL, 0x4, 0x0);
+ break;
+ case V4L2_MBUS_PARALLEL:
+ /* 8-bit YUV 4:2:2 */
+ regmap_update_bits(decoder->regmap, TVP5150_DATA_RATE_SEL,
+ 0x7, 0x0);
+ /* enable HSYNC, VSYNC/PALI, AVID, and FID/GLCO */
+ regmap_update_bits(decoder->regmap, TVP5150_MISC_CTL, 0x4, 0x4);
+ break;
+ default:
+ return -EINVAL;
+ }
+
/* Initialize image preferences */
v4l2_ctrl_handler_setup(&decoder->hdl);
@@ -1315,6 +1335,8 @@ static struct regmap_config tvp5150_config = {
static int tvp5150_probe(struct i2c_client *c,
const struct i2c_device_id *id)
{
+ struct v4l2_of_endpoint bus_cfg;
+ struct device_node *endpoint;
struct tvp5150 *core;
struct v4l2_subdev *sd;
struct regmap *map;
@@ -1375,6 +1397,14 @@ static int tvp5150_probe(struct i2c_client *c,
}
}
+ endpoint = of_graph_get_next_endpoint(c->dev.of_node, NULL);
+ if (endpoint) {
+ v4l2_of_parse_endpoint(endpoint, &bus_cfg);
+ core->bus_type = bus_cfg.bus_type;
+ } else {
+ core->bus_type = V4L2_MBUS_BT656;
+ }
+
core->norm = V4L2_STD_ALL; /* Default is autodetect */
core->input = TVP5150_COMPOSITE1;
core->enable = 1;