[v2,4/5] media: atmel-isi: setup YCC_SWAP correctly when using preview path
Commit Message
The preview path only can convert UYVY format to RGB data.
To make preview path work correctly, we need to set up YCC_SWAP
according to sensor output and convert them to UYVY.
Signed-off-by: Josh Wu <josh.wu@atmel.com>
---
Changes in v2:
- remove cfg2_yuv_swap for rgb format
- correct the comment style
drivers/media/platform/soc_camera/atmel-isi.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
@@ -117,6 +117,20 @@ static u32 setup_cfg2_yuv_swap(struct atmel_isi *isi,
case MEDIA_BUS_FMT_YVYU8_2X8:
return ISI_CFG2_YCC_SWAP_MODE_1;
}
+ } else if (xlate->host_fmt->fourcc == V4L2_PIX_FMT_RGB565) {
+ /*
+ * Preview path is enabled, it will convert UYVY to RGB format.
+ * But if sensor output format is not UYVY, we need to set
+ * YCC_SWAP_MODE to convert it as UYVY.
+ */
+ switch (xlate->code) {
+ case MEDIA_BUS_FMT_VYUY8_2X8:
+ return ISI_CFG2_YCC_SWAP_MODE_1;
+ case MEDIA_BUS_FMT_YUYV8_2X8:
+ return ISI_CFG2_YCC_SWAP_MODE_2;
+ case MEDIA_BUS_FMT_YVYU8_2X8:
+ return ISI_CFG2_YCC_SWAP_MODE_3;
+ }
}
/*