[17/19] em28xx: remove field tda9887_conf from struct em28xx
Commit Message
The tda9887 configuration is already stored in the board data, and it is used
only one time by the v4l2 sub-module at tuner setup.
Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
---
drivers/media/usb/em28xx/em28xx-cards.c | 3 ---
drivers/media/usb/em28xx/em28xx-video.c | 6 +++---
drivers/media/usb/em28xx/em28xx.h | 1 -
3 files changed, 3 insertions(+), 7 deletions(-)
@@ -2719,9 +2719,6 @@ static void em28xx_card_setup(struct em28xx *dev)
if (em28xx_boards[dev->model].tuner_addr)
dev->tuner_addr = em28xx_boards[dev->model].tuner_addr;
- if (em28xx_boards[dev->model].tda9887_conf)
- dev->tda9887_conf = em28xx_boards[dev->model].tda9887_conf;
-
/* request some modules */
switch (dev->model) {
case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2:
@@ -2254,11 +2254,11 @@ static void em28xx_tuner_setup(struct em28xx *dev)
0, tuner, s_type_addr, &tun_setup);
}
- if (dev->tda9887_conf) {
+ if (dev->board.tda9887_conf) {
struct v4l2_priv_tun_config tda9887_cfg;
tda9887_cfg.tuner = TUNER_TDA9887;
- tda9887_cfg.priv = &dev->tda9887_conf;
+ tda9887_cfg.priv = &dev->board.tda9887_conf;
v4l2_device_call_all(v4l2_dev,
0, tuner, s_config, &tda9887_cfg);
@@ -2364,7 +2364,7 @@ static int em28xx_v4l2_init(struct em28xx *dev)
/* Initialize tuner and camera */
if (dev->board.tuner_type != TUNER_ABSENT) {
- int has_demod = (dev->tda9887_conf & TDA9887_PRESENT);
+ int has_demod = (dev->board.tda9887_conf & TDA9887_PRESENT);
if (dev->board.radio.type)
v4l2_i2c_new_subdev(&v4l2->v4l2_dev,
@@ -633,7 +633,6 @@ struct em28xx {
int tuner_type; /* type of the tuner */
int tuner_addr; /* tuner address */
- int tda9887_conf;
/* i2c i/o */
struct i2c_adapter i2c_adap[NUM_I2C_BUSES];