[v7,02/13,media] exynos5-fimc-is: Add Exynos5 FIMC-IS device tree bindings documentation
Commit Message
The patch adds the DT binding documentation for Samsung
Exynos5 SoC series imaging subsystem (FIMC-IS).
Signed-off-by: Arun Kumar K <arun.kk@samsung.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
---
.../devicetree/bindings/media/exynos5-fimc-is.txt | 46 ++++++++++++++++++++
1 file changed, 46 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/exynos5-fimc-is.txt
Comments
On 08/21/2013 08:34 AM, Arun Kumar K wrote:
> The patch adds the DT binding documentation for Samsung
> Exynos5 SoC series imaging subsystem (FIMC-IS).
>
> Signed-off-by: Arun Kumar K<arun.kk@samsung.com>
> Reviewed-by: Sylwester Nawrocki<s.nawrocki@samsung.com>
Can I have a DT binding maintainer Ack for this binding ?
I'd like to queue this patch for 3.13 once the merge window has closed.
> ---
> .../devicetree/bindings/media/exynos5-fimc-is.txt | 46 ++++++++++++++++++++
> 1 file changed, 46 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/exynos5-fimc-is.txt
>
> diff --git a/Documentation/devicetree/bindings/media/exynos5-fimc-is.txt b/Documentation/devicetree/bindings/media/exynos5-fimc-is.txt
> new file mode 100644
> index 0000000..5611401
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/exynos5-fimc-is.txt
> @@ -0,0 +1,46 @@
> +Samsung EXYNOS5 SoC series Imaging Subsystem (FIMC-IS)
> +------------------------------------------------------
> +
> +The camera subsystem on Samsung Exynos5 SoC has some changes relative
> +to previous SoC versions. Exynos5 has almost similar MIPI-CSIS and
> +FIMC-LITE IPs but has a much improved version of FIMC-IS which can
> +handle sensor controls and camera post-processing operations. The
> +Exynos5 FIMC-IS has a dedicated ARM Cortex A5 processor, many
> +post-processing blocks (ISP, DRC, FD, ODC, DIS, 3DNR) and two
> +dedicated scalers (SCC and SCP).
> +
> +fimc-is node
> +------------
> +
> +Required properties:
> +
> +- compatible : must be "samsung,exynos5250-fimc-is"
> +- reg : physical base address and size of the memory mapped
> + registers
> +- interrupt-parent : parent interrupt controller
> +- interrupts : fimc-is interrupt to the parent interrupt controller
> +- clocks : list of clock specifiers, corresponding to entries in
> + clock-names property
> +- clock-names : must contain "isp", "mcu_isp", "isp_div0", "isp_div1",
> + "isp_divmpwm", "mcu_isp_div0", "mcu_isp_div1" entries,
> + matching entries in the clocks property
> +- samsung,pmu : phandle to the Power Management Unit (PMU) node
> +
> +i2c-isp (ISP I2C bus controller) nodes
> +------------------------------------------
> +
> +Required properties:
> +
> +- compatible : should be "samsung,exynos4212-i2c-isp" for Exynos4212,
> + Exynos4412 and Exynos5250 SoCs
> +- reg : physical base address and length of the registers set
> +- clocks : must contain gate clock specifier for this controller
> +- clock-names : must contain "i2c_isp" entry
> +
> +For the i2c-isp node, it is required to specify a pinctrl state named "default",
> +according to the pinctrl bindings defined in ../pinctrl/pinctrl-bindings.txt.
> +
> +Device tree nodes of the image sensors controlled directly by the FIMC-IS
> +firmware must be child nodes of their corresponding ISP I2C bus controller node.
> +The data link of these image sensors must be specified using the common video
> +interfaces bindings, defined in video-interfaces.txt.
--
Thanks,
Sylwester
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
new file mode 100644
@@ -0,0 +1,46 @@
+Samsung EXYNOS5 SoC series Imaging Subsystem (FIMC-IS)
+------------------------------------------------------
+
+The camera subsystem on Samsung Exynos5 SoC has some changes relative
+to previous SoC versions. Exynos5 has almost similar MIPI-CSIS and
+FIMC-LITE IPs but has a much improved version of FIMC-IS which can
+handle sensor controls and camera post-processing operations. The
+Exynos5 FIMC-IS has a dedicated ARM Cortex A5 processor, many
+post-processing blocks (ISP, DRC, FD, ODC, DIS, 3DNR) and two
+dedicated scalers (SCC and SCP).
+
+fimc-is node
+------------
+
+Required properties:
+
+- compatible : must be "samsung,exynos5250-fimc-is"
+- reg : physical base address and size of the memory mapped
+ registers
+- interrupt-parent : parent interrupt controller
+- interrupts : fimc-is interrupt to the parent interrupt controller
+- clocks : list of clock specifiers, corresponding to entries in
+ clock-names property
+- clock-names : must contain "isp", "mcu_isp", "isp_div0", "isp_div1",
+ "isp_divmpwm", "mcu_isp_div0", "mcu_isp_div1" entries,
+ matching entries in the clocks property
+- samsung,pmu : phandle to the Power Management Unit (PMU) node
+
+i2c-isp (ISP I2C bus controller) nodes
+------------------------------------------
+
+Required properties:
+
+- compatible : should be "samsung,exynos4212-i2c-isp" for Exynos4212,
+ Exynos4412 and Exynos5250 SoCs
+- reg : physical base address and length of the registers set
+- clocks : must contain gate clock specifier for this controller
+- clock-names : must contain "i2c_isp" entry
+
+For the i2c-isp node, it is required to specify a pinctrl state named "default",
+according to the pinctrl bindings defined in ../pinctrl/pinctrl-bindings.txt.
+
+Device tree nodes of the image sensors controlled directly by the FIMC-IS
+firmware must be child nodes of their corresponding ISP I2C bus controller node.
+The data link of these image sensors must be specified using the common video
+interfaces bindings, defined in video-interfaces.txt.