[v3,2/4] media i.MX27 camera: add start_stream and stop_stream callbacks.
Commit Message
Add "start_stream" and "stop_stream" callback in order to enable
and disable the eMMa-PrP properly and save CPU usage avoiding
IRQs when the device is not streaming. This also makes the driver
return 0 as the sequence number of the first frame.
Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
---
- Make start_streaming cleaner.
---
drivers/media/video/mx2_camera.c | 100 ++++++++++++++++++++++++++++---------
1 files changed, 75 insertions(+), 25 deletions(-)
@@ -377,7 +377,7 @@ static int mx2_camera_add_device(struct soc_camera_device *icd)
writel(pcdev->csicr1, pcdev->base_csi + CSICR1);
pcdev->icd = icd;
- pcdev->frame_count = 0;
+ pcdev->frame_count = -1;
dev_info(icd->parent, "Camera driver attached to camera %d\n",
icd->devnum);
@@ -656,11 +656,79 @@ static void mx2_videobuf_release(struct vb2_buffer *vb)
spin_unlock_irqrestore(&pcdev->lock, flags);
}
+static int mx2_start_streaming(struct vb2_queue *q, unsigned int count)
+{
+ struct soc_camera_device *icd = soc_camera_from_vb2q(q);
+ struct soc_camera_host *ici =
+ to_soc_camera_host(icd->parent);
+ struct mx2_camera_dev *pcdev = ici->priv;
+ struct mx2_fmt_cfg *prp = pcdev->emma_prp;
+
+ if (mx27_camera_emma(pcdev)) {
+ unsigned long flags;
+ if (count < 2)
+ return -EINVAL;
+
+ spin_lock_irqsave(&pcdev->lock, flags);
+ if (prp->cfg.channel == 1) {
+ writel(PRP_CNTL_CH1EN |
+ PRP_CNTL_CSIEN |
+ prp->cfg.in_fmt |
+ prp->cfg.out_fmt |
+ PRP_CNTL_CH1_LEN |
+ PRP_CNTL_CH1BYP |
+ PRP_CNTL_CH1_TSKIP(0) |
+ PRP_CNTL_IN_TSKIP(0),
+ pcdev->base_emma + PRP_CNTL);
+ } else {
+ writel(PRP_CNTL_CH2EN |
+ PRP_CNTL_CSIEN |
+ prp->cfg.in_fmt |
+ prp->cfg.out_fmt |
+ PRP_CNTL_CH2_LEN |
+ PRP_CNTL_CH2_TSKIP(0) |
+ PRP_CNTL_IN_TSKIP(0),
+ pcdev->base_emma + PRP_CNTL);
+ }
+ spin_unlock_irqrestore(&pcdev->lock, flags);
+ }
+
+ return 0;
+}
+
+static int mx2_stop_streaming(struct vb2_queue *q)
+{
+ struct soc_camera_device *icd = soc_camera_from_vb2q(q);
+ struct soc_camera_host *ici =
+ to_soc_camera_host(icd->parent);
+ struct mx2_camera_dev *pcdev = ici->priv;
+ struct mx2_fmt_cfg *prp = pcdev->emma_prp;
+ unsigned long flags;
+ u32 cntl;
+
+ spin_lock_irqsave(&pcdev->lock, flags);
+ if (mx27_camera_emma(pcdev)) {
+ cntl = readl(pcdev->base_emma + PRP_CNTL);
+ if (prp->cfg.channel == 1) {
+ writel(cntl & ~PRP_CNTL_CH1EN,
+ pcdev->base_emma + PRP_CNTL);
+ } else {
+ writel(cntl & ~PRP_CNTL_CH2EN,
+ pcdev->base_emma + PRP_CNTL);
+ }
+ }
+ spin_unlock_irqrestore(&pcdev->lock, flags);
+
+ return 0;
+}
+
static struct vb2_ops mx2_videobuf_ops = {
- .queue_setup = mx2_videobuf_setup,
- .buf_prepare = mx2_videobuf_prepare,
- .buf_queue = mx2_videobuf_queue,
- .buf_cleanup = mx2_videobuf_release,
+ .queue_setup = mx2_videobuf_setup,
+ .buf_prepare = mx2_videobuf_prepare,
+ .buf_queue = mx2_videobuf_queue,
+ .buf_cleanup = mx2_videobuf_release,
+ .start_streaming = mx2_start_streaming,
+ .stop_streaming = mx2_stop_streaming,
};
static int mx2_camera_init_videobuf(struct vb2_queue *q,
@@ -718,16 +786,6 @@ static void mx27_camera_emma_buf_init(struct soc_camera_device *icd,
writel(pcdev->discard_buffer_dma,
pcdev->base_emma + PRP_DEST_RGB2_PTR);
- writel(PRP_CNTL_CH1EN |
- PRP_CNTL_CSIEN |
- prp->cfg.in_fmt |
- prp->cfg.out_fmt |
- PRP_CNTL_CH1_LEN |
- PRP_CNTL_CH1BYP |
- PRP_CNTL_CH1_TSKIP(0) |
- PRP_CNTL_IN_TSKIP(0),
- pcdev->base_emma + PRP_CNTL);
-
writel((icd->user_width << 16) | icd->user_height,
pcdev->base_emma + PRP_SRC_FRAME_SIZE);
writel((icd->user_width << 16) | icd->user_height,
@@ -755,15 +813,6 @@ static void mx27_camera_emma_buf_init(struct soc_camera_device *icd,
pcdev->base_emma + PRP_SOURCE_CR_PTR);
}
- writel(PRP_CNTL_CH2EN |
- PRP_CNTL_CSIEN |
- prp->cfg.in_fmt |
- prp->cfg.out_fmt |
- PRP_CNTL_CH2_LEN |
- PRP_CNTL_CH2_TSKIP(0) |
- PRP_CNTL_IN_TSKIP(0),
- pcdev->base_emma + PRP_CNTL);
-
writel((icd->user_width << 16) | icd->user_height,
pcdev->base_emma + PRP_SRC_FRAME_SIZE);
@@ -1169,11 +1218,12 @@ static void mx27_camera_frame_done_emma(struct mx2_camera_dev *pcdev,
list_del_init(&buf->queue);
do_gettimeofday(&vb->v4l2_buf.timestamp);
- pcdev->frame_count++;
vb->v4l2_buf.sequence = pcdev->frame_count;
vb2_buffer_done(vb, VB2_BUF_STATE_DONE);
}
+ pcdev->frame_count++;
+
if (list_empty(&pcdev->capture)) {
if (prp->cfg.channel == 1) {
writel(pcdev->discard_buffer_dma, pcdev->base_emma +