[v2,4/5] cxd2820r: Update frontend capabilities to advertise QAM-256
Commit Message
This is supported in DVB-T2 mode, so added to the T/T2 frontend.
Signed-off-by: Steve Kerrison <steve@stevekerrison.com>
---
drivers/media/dvb/frontends/cxd2820r_core.c | 3 ++-
1 files changed, 2 insertions(+), 1 deletions(-)
Comments
Hello Steve,
All your DVB-T2 / CXD2820R are fine for me, thanks. I'll ack only this
one since it is almost only having very small, but direct, effect to
CXD2820R driver.
On 05/08/2011 10:17 PM, Steve Kerrison wrote:
> This is supported in DVB-T2 mode, so added to the T/T2 frontend.
>
> Signed-off-by: Steve Kerrison<steve@stevekerrison.com>
Acked-by: Antti Palosaari <crope@iki.fi>
> ---
> drivers/media/dvb/frontends/cxd2820r_core.c | 3 ++-
> 1 files changed, 2 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/media/dvb/frontends/cxd2820r_core.c b/drivers/media/dvb/frontends/cxd2820r_core.c
> index e900c4c..0779f69 100644
> --- a/drivers/media/dvb/frontends/cxd2820r_core.c
> +++ b/drivers/media/dvb/frontends/cxd2820r_core.c
> @@ -855,7 +855,8 @@ static struct dvb_frontend_ops cxd2820r_ops[2] = {
> FE_CAN_FEC_3_4 | FE_CAN_FEC_5_6 |
> FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
> FE_CAN_QPSK | FE_CAN_QAM_16 |
> - FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
> + FE_CAN_QAM_64 | FE_CAN_QAM_256 |
> + FE_CAN_QAM_AUTO |
> FE_CAN_TRANSMISSION_MODE_AUTO |
> FE_CAN_GUARD_INTERVAL_AUTO |
> FE_CAN_HIERARCHY_AUTO |
regards
Antti
@@ -855,7 +855,8 @@ static struct dvb_frontend_ops cxd2820r_ops[2] = {
FE_CAN_FEC_3_4 | FE_CAN_FEC_5_6 |
FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
FE_CAN_QPSK | FE_CAN_QAM_16 |
- FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
+ FE_CAN_QAM_64 | FE_CAN_QAM_256 |
+ FE_CAN_QAM_AUTO |
FE_CAN_TRANSMISSION_MODE_AUTO |
FE_CAN_GUARD_INTERVAL_AUTO |
FE_CAN_HIERARCHY_AUTO |