[omap3isp] omap3isp: does not allow pipeline with multiple video outputs yet

Message ID 1290173034-11257-1-git-send-email-david.cohen@nokia.com (mailing list archive)
State Superseded, archived
Headers

Commit Message

David Cohen Nov. 19, 2010, 1:23 p.m. UTC
  OMAP3 ISP driver does not support pipeline with multiple video outputs yet.
Driver must return -EBUSY in this case.

Signed-off-by: David Cohen <david.cohen@nokia.com>
---
 drivers/media/video/isp/ispccdc.c    |   26 ++++++++++++++++++++------
 drivers/media/video/isp/ispcsi2.c    |   19 +++++++++++++++----
 drivers/media/video/isp/isppreview.c |   19 +++++++++++++++----
 3 files changed, 50 insertions(+), 14 deletions(-)
  

Comments

David Cohen Nov. 19, 2010, 1:41 p.m. UTC | #1
On Fri, Nov 19, 2010 at 02:23:54PM +0100, Cohen David (Nokia-MS/Helsinki) wrote:
> OMAP3 ISP driver does not support pipeline with multiple video outputs yet.
> Driver must return -EBUSY in this case.
> 
> Signed-off-by: David Cohen <david.cohen@nokia.com>
> ---
>  drivers/media/video/isp/ispccdc.c    |   26 ++++++++++++++++++++------
>  drivers/media/video/isp/ispcsi2.c    |   19 +++++++++++++++----
>  drivers/media/video/isp/isppreview.c |   19 +++++++++++++++----
>  3 files changed, 50 insertions(+), 14 deletions(-)
> 

[snip]

> diff --git a/drivers/media/video/isp/ispcsi2.c b/drivers/media/video/isp/ispcsi2.c
> index 65c777a..8052b38 100644
> --- a/drivers/media/video/isp/ispcsi2.c
> +++ b/drivers/media/video/isp/ispcsi2.c
> @@ -1088,19 +1088,30 @@ static int csi2_link_setup(struct media_entity *entity,
>  	struct isp_csi2_device *csi2 = v4l2_get_subdevdata(sd);
>  	struct isp_csi2_ctrl_cfg *ctrl = &csi2->ctrl;
>  
> +	/*
> +	 * This driver currently does not support pipeline with multiples
> +	 * video outputs. It must return -EBUSY while it's not implemented.
> +	 */
> +
>  	switch (local->index | (remote->entity->type << 16)) {
>  	case CSI2_PAD_SOURCE | (MEDIA_ENTITY_TYPE_NODE << 16):
> -		if (flags & MEDIA_LINK_FLAG_ACTIVE)
> +		if (flags & MEDIA_LINK_FLAG_ACTIVE) {
> +			if (csi2->output & ~CSI2_OUTPUT_MEMORY)
> +				return -EBUSY;
>  			csi2->output |= CSI2_OUTPUT_MEMORY;
> -		else
> +		} else {
>  			csi2->output &= ~CSI2_OUTPUT_MEMORY;
> +		}
>  		break;
>  
>  	case CSI2_PAD_SOURCE | (MEDIA_ENTITY_TYPE_SUBDEV << 16):
> -		if (flags & MEDIA_LINK_FLAG_ACTIVE)
> +		if (flags & MEDIA_LINK_FLAG_ACTIVE) {
> +			if (csi2->output & ~CSI2_OUTPUT_MEMORY)

There is a typo here. Please, change ~CSI2_OUTPUT_MEMORY to ~CSI2_OUTPUT_CCDC
here before test it. I'll send a new version after get comments.

Br,

David Cohen

> +				return -EBUSY;
>  			csi2->output |= CSI2_OUTPUT_CCDC;
> -		else
> +		} else {
>  			csi2->output &= ~CSI2_OUTPUT_CCDC;
> +		}
>  		break;
>  
>  	default:
> diff --git a/drivers/media/video/isp/isppreview.c b/drivers/media/video/isp/isppreview.c
> index 6274b44..39d4da4 100644
> --- a/drivers/media/video/isp/isppreview.c
> +++ b/drivers/media/video/isp/isppreview.c
> @@ -2026,20 +2026,31 @@ static int preview_link_setup(struct media_entity *entity,
>  		}
>  		break;
>  
> +	/*
> +	 * This driver currently does not support pipeline with multiples
> +	 * video outputs. It must return -EBUSY while it's not implemented.
> +	 */
> +
>  	case PREV_PAD_SOURCE | (MEDIA_ENTITY_TYPE_NODE << 16):
>  		/* write to memory */
> -		if (flags & MEDIA_LINK_FLAG_ACTIVE)
> +		if (flags & MEDIA_LINK_FLAG_ACTIVE) {
> +			if (prev->output & ~PREVIEW_OUTPUT_MEMORY)
> +				return -EBUSY;
>  			prev->output |= PREVIEW_OUTPUT_MEMORY;
> -		else
> +		} else {
>  			prev->output &= ~PREVIEW_OUTPUT_MEMORY;
> +		}
>  		break;
>  
>  	case PREV_PAD_SOURCE | (MEDIA_ENTITY_TYPE_SUBDEV << 16):
>  		/* write to resizer */
> -		if (flags & MEDIA_LINK_FLAG_ACTIVE)
> +		if (flags & MEDIA_LINK_FLAG_ACTIVE) {
> +			if (prev->output & ~PREVIEW_OUTPUT_RESIZER)
> +				return -EBUSY;
>  			prev->output |= PREVIEW_OUTPUT_RESIZER;
> -		else
> +		} else {
>  			prev->output &= ~PREVIEW_OUTPUT_RESIZER;
> +		}
>  		break;
>  
>  	default:
> -- 
> 1.7.2.3
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
  

Patch

diff --git a/drivers/media/video/isp/ispccdc.c b/drivers/media/video/isp/ispccdc.c
index a4c6444..a19795c 100644
--- a/drivers/media/video/isp/ispccdc.c
+++ b/drivers/media/video/isp/ispccdc.c
@@ -2016,30 +2016,44 @@  static int ccdc_link_setup(struct media_entity *entity,
 
 		break;
 
+	/*
+	 * This driver currently does not support pipeline with multiples
+	 * video outputs. It must return -EBUSY while it's not implemented.
+	 */
+
 	case CCDC_PAD_SOURCE_VP | (MEDIA_ENTITY_TYPE_SUBDEV << 16):
 		/* Write to preview engine, histogram and H3A. When none of
 		 * those links are active, the video port can be disabled.
 		 */
-		if (flags & MEDIA_LINK_FLAG_ACTIVE)
+		if (flags & MEDIA_LINK_FLAG_ACTIVE) {
+			if (ccdc->output & ~CCDC_OUTPUT_PREVIEW)
+				return -EBUSY;
 			ccdc->output |= CCDC_OUTPUT_PREVIEW;
-		else
+		} else {
 			ccdc->output &= ~CCDC_OUTPUT_PREVIEW;
+		}
 		break;
 
 	case CCDC_PAD_SOURCE_OF | (MEDIA_ENTITY_TYPE_NODE << 16):
 		/* Write to memory */
-		if (flags & MEDIA_LINK_FLAG_ACTIVE)
+		if (flags & MEDIA_LINK_FLAG_ACTIVE) {
+			if (ccdc->output & ~CCDC_OUTPUT_MEMORY)
+				return -EBUSY;
 			ccdc->output |= CCDC_OUTPUT_MEMORY;
-		else
+		} else {
 			ccdc->output &= ~CCDC_OUTPUT_MEMORY;
+		}
 		break;
 
 	case CCDC_PAD_SOURCE_OF | (MEDIA_ENTITY_TYPE_SUBDEV << 16):
 		/* Write to resizer */
-		if (flags & MEDIA_LINK_FLAG_ACTIVE)
+		if (flags & MEDIA_LINK_FLAG_ACTIVE) {
+			if (ccdc->output & ~CCDC_OUTPUT_RESIZER)
+				return -EBUSY;
 			ccdc->output |= CCDC_OUTPUT_RESIZER;
-		else
+		} else {
 			ccdc->output &= ~CCDC_OUTPUT_RESIZER;
+		}
 		break;
 
 	default:
diff --git a/drivers/media/video/isp/ispcsi2.c b/drivers/media/video/isp/ispcsi2.c
index 65c777a..8052b38 100644
--- a/drivers/media/video/isp/ispcsi2.c
+++ b/drivers/media/video/isp/ispcsi2.c
@@ -1088,19 +1088,30 @@  static int csi2_link_setup(struct media_entity *entity,
 	struct isp_csi2_device *csi2 = v4l2_get_subdevdata(sd);
 	struct isp_csi2_ctrl_cfg *ctrl = &csi2->ctrl;
 
+	/*
+	 * This driver currently does not support pipeline with multiples
+	 * video outputs. It must return -EBUSY while it's not implemented.
+	 */
+
 	switch (local->index | (remote->entity->type << 16)) {
 	case CSI2_PAD_SOURCE | (MEDIA_ENTITY_TYPE_NODE << 16):
-		if (flags & MEDIA_LINK_FLAG_ACTIVE)
+		if (flags & MEDIA_LINK_FLAG_ACTIVE) {
+			if (csi2->output & ~CSI2_OUTPUT_MEMORY)
+				return -EBUSY;
 			csi2->output |= CSI2_OUTPUT_MEMORY;
-		else
+		} else {
 			csi2->output &= ~CSI2_OUTPUT_MEMORY;
+		}
 		break;
 
 	case CSI2_PAD_SOURCE | (MEDIA_ENTITY_TYPE_SUBDEV << 16):
-		if (flags & MEDIA_LINK_FLAG_ACTIVE)
+		if (flags & MEDIA_LINK_FLAG_ACTIVE) {
+			if (csi2->output & ~CSI2_OUTPUT_MEMORY)
+				return -EBUSY;
 			csi2->output |= CSI2_OUTPUT_CCDC;
-		else
+		} else {
 			csi2->output &= ~CSI2_OUTPUT_CCDC;
+		}
 		break;
 
 	default:
diff --git a/drivers/media/video/isp/isppreview.c b/drivers/media/video/isp/isppreview.c
index 6274b44..39d4da4 100644
--- a/drivers/media/video/isp/isppreview.c
+++ b/drivers/media/video/isp/isppreview.c
@@ -2026,20 +2026,31 @@  static int preview_link_setup(struct media_entity *entity,
 		}
 		break;
 
+	/*
+	 * This driver currently does not support pipeline with multiples
+	 * video outputs. It must return -EBUSY while it's not implemented.
+	 */
+
 	case PREV_PAD_SOURCE | (MEDIA_ENTITY_TYPE_NODE << 16):
 		/* write to memory */
-		if (flags & MEDIA_LINK_FLAG_ACTIVE)
+		if (flags & MEDIA_LINK_FLAG_ACTIVE) {
+			if (prev->output & ~PREVIEW_OUTPUT_MEMORY)
+				return -EBUSY;
 			prev->output |= PREVIEW_OUTPUT_MEMORY;
-		else
+		} else {
 			prev->output &= ~PREVIEW_OUTPUT_MEMORY;
+		}
 		break;
 
 	case PREV_PAD_SOURCE | (MEDIA_ENTITY_TYPE_SUBDEV << 16):
 		/* write to resizer */
-		if (flags & MEDIA_LINK_FLAG_ACTIVE)
+		if (flags & MEDIA_LINK_FLAG_ACTIVE) {
+			if (prev->output & ~PREVIEW_OUTPUT_RESIZER)
+				return -EBUSY;
 			prev->output |= PREVIEW_OUTPUT_RESIZER;
-		else
+		} else {
 			prev->output &= ~PREVIEW_OUTPUT_RESIZER;
+		}
 		break;
 
 	default: