mbox series

[v4,0/4] IMX274 fixes and power on and off implementation

Message ID 1598903558-9691-1-git-send-email-skomatineni@nvidia.com (mailing list archive)
Headers
Series IMX274 fixes and power on and off implementation |

Message

Sowjanya Komatineni Aug. 31, 2020, 7:52 p.m. UTC 
  This patch series includes
- Fix for proper Y_OUT_SIZE register configuration.
- Power on/off sequence implementation through runtime PM.
- dt-binding doc update to move input clock and supplies as required
  properties.

Delta between patch versions:
[v4]:	Includes below v4 feedback
	- Implemented power on/off through Runtime PM.
	- Use regulator bulk APIs.
	- Use lower case for supply names.

[v3]:	Includes below v2 feedback
	- Removed explicit clk_set_rate from driver as default external
	  input clock rate can be configured through DT.

[v2]:	Includes below changes based on v1 feedback
	- External input clock name changed from xclk to inck.
	- implementation change for get regulators to store all in array.
	- To keep in reset low prior to regulators power on.

Sowjanya Komatineni (4):
  media: i2c: imx274: Fix Y_OUT_SIZE register setting
  dt-bindings: media: imx274: Use lower case for supply names
  dt-bindings: media: imx274: Move clock and supplies to required
    properties
  media: i2c: imx274: Add IMX274 power on and off sequence

 .../devicetree/bindings/media/i2c/imx274.txt       |  10 +-
 drivers/media/i2c/imx274.c                         | 153 ++++++++++++++++++++-
 2 files changed, 154 insertions(+), 9 deletions(-)