LinuxTV Patchwork [v2,4/4] media: coda: Clear the interrupt reason

mail settings
Submitter Ezequiel Garcia
Date May 2, 2019, 10 p.m.
Message ID <>
Download mbox | patch
Permalink /patch/55994/
State New
Delegated to: Hans Verkuil
Headers show


Ezequiel Garcia - May 2, 2019, 10 p.m.
This commit clears the interrupt reason (INT_REASON) register
on the interrupt handler. Without this clearing, the CODA hardware
has been observed to get completely stalled on CODA980 variants,
requiring a pretty deep hardware reset.

The datasheet specifies that the INT_REASON register is set
by the CODA hardware, and should be cleared by the host.

While the CODA versions that are currently supported by this driver
don't seem to need this change, it's a really small change,
so it seems a wise thing to do to avoid hitting some
rare race-condition in the hardware.

Reviewed-by: Philipp Zabel <>
Signed-off-by: Ezequiel Garcia <>
 drivers/media/platform/coda/coda-bit.c | 1 +
 1 file changed, 1 insertion(+)


diff --git a/drivers/media/platform/coda/coda-bit.c b/drivers/media/platform/coda/coda-bit.c
index bddd2f5c8c2b..a653aaa3ca15 100644
--- a/drivers/media/platform/coda/coda-bit.c
+++ b/drivers/media/platform/coda/coda-bit.c
@@ -2301,6 +2301,7 @@  irqreturn_t coda_irq_handler(int irq, void *data)
 	/* read status register to attend the IRQ */
 	coda_read(dev, CODA_REG_BIT_INT_STATUS);
+	coda_write(dev, 0, CODA_REG_BIT_INT_REASON);
 	coda_write(dev, CODA_REG_BIT_INT_CLEAR_SET,

Privacy Policy