[1/9] sh: defconfig: migor: Update defconfig

Update defconfig to Linux v4.18-rc2.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>

---
The updated config file generated by:

make ARCH=sh migor_defconfig
make ARCH=sh menuconfig
make ARCH=sh savedefconfig
cp defconfig arch/sh/configs/migor_defconfig
---
---
 arch/sh/configs/migor_defconfig | 25 ++-----------------------
 1 file changed, 2 insertions(+), 23 deletions(-)
  

Hi Jacopo,

On Wed, Jul 4, 2018 at 12:23 PM Jacopo Mondi <jacopo+renesas@jmondi.org> wrote:
> Update defconfig to Linux v4.18-rc2.
>
> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>

Thanks for your patch!

> ---
> The updated config file generated by:
>
> make ARCH=sh migor_defconfig
> make ARCH=sh menuconfig

Which changes have you made here?
It's a good idea to always list the net changes induced by your defconfig patch.

> make ARCH=sh savedefconfig
> cp defconfig arch/sh/configs/migor_defconfig

Gr{oetje,eeting}s,

                        Geert
  

Hi Geert,

On Wed, Jul 04, 2018 at 01:08:59PM +0200, Geert Uytterhoeven wrote:
> Hi Jacopo,
>
> On Wed, Jul 4, 2018 at 12:23 PM Jacopo Mondi <jacopo+renesas@jmondi.org> wrote:
> > Update defconfig to Linux v4.18-rc2.
> >
> > Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
>
> Thanks for your patch!
>
> > ---
> > The updated config file generated by:
> >
> > make ARCH=sh migor_defconfig
> > make ARCH=sh menuconfig
>
> Which changes have you made here?

mmm, I haven't made any explicit change, I just used the defconfig for
each board, run 'make menuconfig; make savedefconfig' that for my
understanding removes the obsolated options and defaults the newly
introduced ones.

The only changes I have introduced are the enablement of the new CEU
driver and the associated sensor/video decoder drivers.

Thanks
  j

> It's a good idea to always list the net changes induced by your defconfig patch.
>
> > make ARCH=sh savedefconfig
> > cp defconfig arch/sh/configs/migor_defconfig
>
> Gr{oetje,eeting}s,
>
>                         Geert
>
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
>
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
>                                 -- Linus Torvalds
  

Hi Jacopo,

On Wed, Jul 4, 2018 at 1:52 PM jacopo mondi <jacopo@jmondi.org> wrote:
> On Wed, Jul 04, 2018 at 01:08:59PM +0200, Geert Uytterhoeven wrote:
> > On Wed, Jul 4, 2018 at 12:23 PM Jacopo Mondi <jacopo+renesas@jmondi.org> wrote:
> > > Update defconfig to Linux v4.18-rc2.
> > >
> > > Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> >
> > Thanks for your patch!
> >
> > > ---
> > > The updated config file generated by:
> > >
> > > make ARCH=sh migor_defconfig
> > > make ARCH=sh menuconfig
> >
> > Which changes have you made here?
>
> mmm, I haven't made any explicit change, I just used the defconfig for
> each board, run 'make menuconfig; make savedefconfig' that for my
> understanding removes the obsolated options and defaults the newly
> introduced ones.

IC. In that case "make migor_defconfig; make savedefconfig" is sufficient,
and there was no need to run menuconfig ;-)

> The only changes I have introduced are the enablement of the new CEU
> driver and the associated sensor/video decoder drivers.

OK, that's done in a subsequent patch.

> > It's a good idea to always list the net changes induced by your defconfig patch.
> >
> > > make ARCH=sh savedefconfig
> > > cp defconfig arch/sh/configs/migor_defconfig

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
  

Em Wed,  4 Jul 2018 12:15:38 +0200
Jacopo Mondi <jacopo+renesas@jmondi.org> escreveu:

> Update defconfig to Linux v4.18-rc2.
> 
> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>

Why do you want to apply this via the media tree?

IMO, the natural path would be to submit this to the SUPERH
maintainer. If there is a good reason for merging via media,
I'd expect an ack from the maintainer to do it so.

Regards,
Mauro

> 
> ---
> The updated config file generated by:
> 
> make ARCH=sh migor_defconfig
> make ARCH=sh menuconfig
> make ARCH=sh savedefconfig
> cp defconfig arch/sh/configs/migor_defconfig
> ---
> ---
>  arch/sh/configs/migor_defconfig | 25 ++-----------------------
>  1 file changed, 2 insertions(+), 23 deletions(-)
> 
> diff --git a/arch/sh/configs/migor_defconfig b/arch/sh/configs/migor_defconfig
> index e04f21b..a85a327 100644
> --- a/arch/sh/configs/migor_defconfig
> +++ b/arch/sh/configs/migor_defconfig
> @@ -3,8 +3,6 @@ CONFIG_IKCONFIG=y
>  CONFIG_IKCONFIG_PROC=y
>  CONFIG_LOG_BUF_SHIFT=14
>  CONFIG_BLK_DEV_INITRD=y
> -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
> -# CONFIG_SYSCTL_SYSCALL is not set
>  CONFIG_SLAB=y
>  CONFIG_PROFILING=y
>  CONFIG_OPROFILE=y
> @@ -13,9 +11,7 @@ CONFIG_MODULES=y
>  CONFIG_CPU_SUBTYPE_SH7722=y
>  CONFIG_MEMORY_START=0x0c000000
>  CONFIG_NUMA=y
> -# CONFIG_MIGRATION is not set
>  CONFIG_SH_MIGOR=y
> -# CONFIG_SH_TIMER_CMT is not set
>  CONFIG_SECCOMP=y
>  CONFIG_CMDLINE_OVERWRITE=y
>  CONFIG_CMDLINE="console=tty0 console=ttySC0,115200 earlyprintk=serial ip=on root=/dev/nfs ip=dhcp"
> @@ -27,7 +23,6 @@ CONFIG_IP_PNP=y
>  CONFIG_IP_PNP_DHCP=y
>  # CONFIG_IPV6 is not set
>  CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
> -CONFIG_FW_LOADER=m
>  CONFIG_MTD=y
>  CONFIG_MTD_CMDLINE_PARTS=y
>  CONFIG_MTD_BLOCK=y
> @@ -40,9 +35,7 @@ CONFIG_BLK_DEV_RAM=y
>  CONFIG_SCSI=y
>  CONFIG_BLK_DEV_SD=y
>  CONFIG_NETDEVICES=y
> -CONFIG_NET_ETHERNET=y
>  CONFIG_SMC91X=y
> -# CONFIG_INPUT_MOUSEDEV is not set
>  CONFIG_INPUT_EVDEV=y
>  # CONFIG_KEYBOARD_ATKBD is not set
>  CONFIG_KEYBOARD_SH_KEYSC=y
> @@ -50,30 +43,16 @@ CONFIG_KEYBOARD_SH_KEYSC=y
>  CONFIG_INPUT_TOUCHSCREEN=y
>  CONFIG_TOUCHSCREEN_MIGOR=y
>  # CONFIG_SERIO is not set
> -CONFIG_VT_HW_CONSOLE_BINDING=y
>  CONFIG_SERIAL_SH_SCI=y
> -CONFIG_SERIAL_SH_SCI_NR_UARTS=3
> -CONFIG_SERIAL_SH_SCI_CONSOLE=y
>  CONFIG_HW_RANDOM=y
>  CONFIG_I2C=y
>  CONFIG_I2C_SH_MOBILE=y
>  # CONFIG_HWMON is not set
>  CONFIG_MEDIA_SUPPORT=y
> -CONFIG_VIDEO_DEV=y
> -# CONFIG_VIDEO_ALLOW_V4L1 is not set
> -# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
> -CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
> -CONFIG_SOC_CAMERA=y
> -CONFIG_SOC_CAMERA_TW9910=y
> -CONFIG_SOC_CAMERA_OV772X=y
> -CONFIG_VIDEO_SH_MOBILE_CEU=y
> -# CONFIG_RADIO_ADAPTERS is not set
>  CONFIG_FB=y
>  CONFIG_FB_SH_MOBILE_LCDC=y
>  CONFIG_FRAMEBUFFER_CONSOLE=y
>  CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
> -CONFIG_FONTS=y
> -CONFIG_FONT_MINI_4x6=y
>  CONFIG_LOGO=y
>  # CONFIG_LOGO_LINUX_MONO is not set
>  # CONFIG_LOGO_LINUX_VGA16 is not set
> @@ -81,7 +60,6 @@ CONFIG_LOGO=y
>  # CONFIG_LOGO_SUPERH_MONO is not set
>  # CONFIG_LOGO_SUPERH_CLUT224 is not set
>  CONFIG_USB_GADGET=y
> -CONFIG_USB_GADGET_M66592=y
>  CONFIG_USB_G_SERIAL=m
>  CONFIG_RTC_CLASS=y
>  CONFIG_RTC_DRV_RS5C372=y
> @@ -95,6 +73,7 @@ CONFIG_NFS_FS=y
>  CONFIG_ROOT_NFS=y
>  CONFIG_DEBUG_FS=y
>  CONFIG_CRYPTO_MANAGER=y
> -# CONFIG_CRYPTO_ANSI_CPRNG is not set
>  # CONFIG_CRYPTO_HW is not set
>  CONFIG_CRC_T10DIF=y
> +CONFIG_FONTS=y
> +CONFIG_FONT_MINI_4x6=y



Thanks,
Mauro
  

Hi Mauro,
        Sorry for the late reply.

On Tue, Jul 24, 2018 at 06:49:08PM -0300, Mauro Carvalho Chehab wrote:
> Em Wed,  4 Jul 2018 12:15:38 +0200
> Jacopo Mondi <jacopo+renesas@jmondi.org> escreveu:
> 
> > Update defconfig to Linux v4.18-rc2.
> > 
> > Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> 
> Why do you want to apply this via the media tree?
> 

The defconfig update is a preparation for the soc_camera related
options removal, but, yes, I understand your concerns.

> IMO, the natural path would be to submit this to the SUPERH
> maintainer. If there is a good reason for merging via media,
> I'd expect an ack from the maintainer to do it so.
>

SH people, would you like to take this series or ACK/NACK it?

Thanks
   j

> Regards,
> Mauro
> 
> > 
> > ---
> > The updated config file generated by:
> > 
> > make ARCH=sh migor_defconfig
> > make ARCH=sh menuconfig
> > make ARCH=sh savedefconfig
> > cp defconfig arch/sh/configs/migor_defconfig
> > ---
> > ---
> >  arch/sh/configs/migor_defconfig | 25 ++-----------------------
> >  1 file changed, 2 insertions(+), 23 deletions(-)
> > 
> > diff --git a/arch/sh/configs/migor_defconfig b/arch/sh/configs/migor_defconfig
> > index e04f21b..a85a327 100644
> > --- a/arch/sh/configs/migor_defconfig
> > +++ b/arch/sh/configs/migor_defconfig
> > @@ -3,8 +3,6 @@ CONFIG_IKCONFIG=y
> >  CONFIG_IKCONFIG_PROC=y
> >  CONFIG_LOG_BUF_SHIFT=14
> >  CONFIG_BLK_DEV_INITRD=y
> > -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
> > -# CONFIG_SYSCTL_SYSCALL is not set
> >  CONFIG_SLAB=y
> >  CONFIG_PROFILING=y
> >  CONFIG_OPROFILE=y
> > @@ -13,9 +11,7 @@ CONFIG_MODULES=y
> >  CONFIG_CPU_SUBTYPE_SH7722=y
> >  CONFIG_MEMORY_START=0x0c000000
> >  CONFIG_NUMA=y
> > -# CONFIG_MIGRATION is not set
> >  CONFIG_SH_MIGOR=y
> > -# CONFIG_SH_TIMER_CMT is not set
> >  CONFIG_SECCOMP=y
> >  CONFIG_CMDLINE_OVERWRITE=y
> >  CONFIG_CMDLINE="console=tty0 console=ttySC0,115200 earlyprintk=serial ip=on root=/dev/nfs ip=dhcp"
> > @@ -27,7 +23,6 @@ CONFIG_IP_PNP=y
> >  CONFIG_IP_PNP_DHCP=y
> >  # CONFIG_IPV6 is not set
> >  CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
> > -CONFIG_FW_LOADER=m
> >  CONFIG_MTD=y
> >  CONFIG_MTD_CMDLINE_PARTS=y
> >  CONFIG_MTD_BLOCK=y
> > @@ -40,9 +35,7 @@ CONFIG_BLK_DEV_RAM=y
> >  CONFIG_SCSI=y
> >  CONFIG_BLK_DEV_SD=y
> >  CONFIG_NETDEVICES=y
> > -CONFIG_NET_ETHERNET=y
> >  CONFIG_SMC91X=y
> > -# CONFIG_INPUT_MOUSEDEV is not set
> >  CONFIG_INPUT_EVDEV=y
> >  # CONFIG_KEYBOARD_ATKBD is not set
> >  CONFIG_KEYBOARD_SH_KEYSC=y
> > @@ -50,30 +43,16 @@ CONFIG_KEYBOARD_SH_KEYSC=y
> >  CONFIG_INPUT_TOUCHSCREEN=y
> >  CONFIG_TOUCHSCREEN_MIGOR=y
> >  # CONFIG_SERIO is not set
> > -CONFIG_VT_HW_CONSOLE_BINDING=y
> >  CONFIG_SERIAL_SH_SCI=y
> > -CONFIG_SERIAL_SH_SCI_NR_UARTS=3
> > -CONFIG_SERIAL_SH_SCI_CONSOLE=y
> >  CONFIG_HW_RANDOM=y
> >  CONFIG_I2C=y
> >  CONFIG_I2C_SH_MOBILE=y
> >  # CONFIG_HWMON is not set
> >  CONFIG_MEDIA_SUPPORT=y
> > -CONFIG_VIDEO_DEV=y
> > -# CONFIG_VIDEO_ALLOW_V4L1 is not set
> > -# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
> > -CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
> > -CONFIG_SOC_CAMERA=y
> > -CONFIG_SOC_CAMERA_TW9910=y
> > -CONFIG_SOC_CAMERA_OV772X=y
> > -CONFIG_VIDEO_SH_MOBILE_CEU=y
> > -# CONFIG_RADIO_ADAPTERS is not set
> >  CONFIG_FB=y
> >  CONFIG_FB_SH_MOBILE_LCDC=y
> >  CONFIG_FRAMEBUFFER_CONSOLE=y
> >  CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
> > -CONFIG_FONTS=y
> > -CONFIG_FONT_MINI_4x6=y
> >  CONFIG_LOGO=y
> >  # CONFIG_LOGO_LINUX_MONO is not set
> >  # CONFIG_LOGO_LINUX_VGA16 is not set
> > @@ -81,7 +60,6 @@ CONFIG_LOGO=y
> >  # CONFIG_LOGO_SUPERH_MONO is not set
> >  # CONFIG_LOGO_SUPERH_CLUT224 is not set
> >  CONFIG_USB_GADGET=y
> > -CONFIG_USB_GADGET_M66592=y
> >  CONFIG_USB_G_SERIAL=m
> >  CONFIG_RTC_CLASS=y
> >  CONFIG_RTC_DRV_RS5C372=y
> > @@ -95,6 +73,7 @@ CONFIG_NFS_FS=y
> >  CONFIG_ROOT_NFS=y
> >  CONFIG_DEBUG_FS=y
> >  CONFIG_CRYPTO_MANAGER=y
> > -# CONFIG_CRYPTO_ANSI_CPRNG is not set
> >  # CONFIG_CRYPTO_HW is not set
> >  CONFIG_CRC_T10DIF=y
> > +CONFIG_FONTS=y
> > +CONFIG_FONT_MINI_4x6=y
> 
> 
> 
> Thanks,
> Mauro