[v3,2/2] em28xx: add support for new of Terratec H6
Commit Message
There's a new version of Terratec H6 with uses USB ID
0ccd:10b2. This version is similar to the old one (with is
supported via the HTC entry), except that this one has the
eeprom on the second bus.
On this board, one side of this board is labeled with:
dvbc v2.0
The other side with:
94V-0, MO2, RK-4221 with huge digits: 1107
With those patches, the board is properly detected:
em28xx 1-1.5:1.0: New device TERRATEC TERRATCE H5 MKII @ 480 Mbps (0ccd:10b2, interface 0, class 0)
em28xx 1-1.5:1.0: Audio interface 0 found (Vendor Class)
em28xx 1-1.5:1.0: Video interface 0 found: isoc
em28xx 1-1.5:1.0: DVB interface 0 found: isoc
em28xx 1-1.5:1.0: chip ID is em2884
em28xx eeprom 00000000: 26 00 00 00 02 0b 0f e5 f5 64 01 60 09 e5 f5 64 &........d.`...d
em28xx eeprom 00000010: 09 60 03 c2 c6 22 e5 f7 b4 03 13 e5 f6 b4 87 03 .`..."..........
em28xx eeprom 00000020: 02 0a b9 e5 f6 b4 93 03 02 09 46 c2 c6 22 c2 c6 ..........F.."..
em28xx eeprom 00000030: 22 00 60 00 ef 70 08 85 3d 82 85 3c 83 93 ff ef ".`..p..=..<....
em28xx eeprom 00000040: 60 19 85 3d 82 85 3c 83 e4 93 12 07 a3 12 0a fe `..=..<.........
em28xx eeprom 00000050: 05 3d e5 3d 70 02 05 3c 1f 80 e4 22 12 0b 06 02 .=.=p..<..."....
em28xx eeprom 00000060: 07 e2 01 00 1a eb 67 95 cd 0c b2 10 f0 13 6b 03 ......g.......k.
em28xx eeprom 00000070: 98 22 6a 1c 86 12 27 57 4e 16 29 00 60 00 00 00 ."j...'WN.).`...
em28xx eeprom 00000080: 02 00 00 00 5e 00 13 00 f0 10 44 82 82 00 00 00 ....^.....D.....
em28xx eeprom 00000090: 5b 81 c0 00 00 00 20 40 20 80 02 20 10 01 00 00 [..... @ .. ....
em28xx eeprom 000000a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
em28xx eeprom 000000b0: c6 40 00 00 81 00 00 00 00 00 00 00 00 c4 00 00 .@..............
em28xx eeprom 000000c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1c 03 ................
em28xx eeprom 000000d0: 31 00 32 00 33 00 34 00 35 00 36 00 37 00 38 00 1.2.3.4.5.6.7.8.
em28xx eeprom 000000e0: 39 00 41 00 42 00 43 00 44 00 12 03 54 00 45 00 9.A.B.C.D...T.E.
em28xx eeprom 000000f0: 52 00 52 00 41 00 54 00 45 00 43 00 22 03 54 00 R.R.A.T.E.C.".T.
em28xx 1-1.5:1.0: eeprom 000100: ... (skipped)
em28xx 1-1.5:1.0: EEPROM ID = 26 00 00 00, EEPROM hash = 0xbcd5a8cf
em28xx 1-1.5:1.0: EEPROM info:
em28xx 1-1.5:1.0: microcode start address = 0x0004, boot configuration = 0x00
em28xx 1-1.5:1.0: I2S audio, 5 sample rates
em28xx 1-1.5:1.0: 500mA max power
em28xx 1-1.5:1.0: Table at offset 0x27, strings=0x2298, 0x1c6a, 0x1286
em28xx 1-1.5:1.0: Identified as Terratec Cinergy H6 rev. 2 (card=101)
em28xx 1-1.5:1.0: Currently, V4L2 is not supported on this model
em28xx 1-1.5:1.0: dvb set to isoc mode.
usbcore: registered new interface driver em28xx
em28xx 1-1.5:1.0: Binding audio extension
em28xx 1-1.5:1.0: em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
em28xx 1-1.5:1.0: em28xx-audio.c: Copyright (C) 2007-2016 Mauro Carvalho Chehab
em28xx 1-1.5:1.0: Endpoint 0x83 high-speed on intf 0 alt 7 interval = 8, size 196
em28xx 1-1.5:1.0: Number of URBs: 1, with 64 packets and 192 size
em28xx 1-1.5:1.0: Audio extension successfully initialized
em28xx: Registered (Em28xx Audio Extension) extension
em28xx 1-1.5:1.0: Binding DVB extension
drxk: status = 0x639260d9
drxk: detected a drx-3926k, spin A3, xtal 20.250 MHz
drxk: DRXK driver version 0.9.4300
drxk: frontend initialized.
tda18271 4-0060: creating new instance
tda18271: TDA18271HD/C2 detected @ 4-0060
dvbdev: DVB: registering new adapter (1-1.5:1.0)
em28xx 1-1.5:1.0: DVB: registering adapter 0 frontend 0 (DRXK DVB-C DVB-T)...
dvbdev: dvb_create_media_entity: media entity 'DRXK DVB-C DVB-T' registered.
dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
em28xx 1-1.5:1.0: DVB extension successfully initialized
em28xx: Registered (Em28xx dvb Extension) extension
em28xx 1-1.5:1.0: Registering input extension
rc rc0: 1-1.5:1.0 IR as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.0/rc/rc0
Registered IR keymap rc-nec-terratec-cinergy-xs
input: 1-1.5:1.0 IR as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.0/rc/rc0/input0
em28xx 1-1.5:1.0: Input extension successfully initalized
em28xx: Registered (Em28xx Input Extension) extension
tda18271: performing RF tracking filter calibration
tda18271: RF tracking filter calibration complete
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
drivers/media/usb/em28xx/em28xx-cards.c | 18 ++++++++++++++++++
drivers/media/usb/em28xx/em28xx-dvb.c | 1 +
drivers/media/usb/em28xx/em28xx.h | 1 +
3 files changed, 20 insertions(+)
Comments
Am 03.05.2017 um 04:12 schrieb Mauro Carvalho Chehab:
> There's a new version of Terratec H6 with uses USB ID
> 0ccd:10b2. This version is similar to the old one (with is
> supported via the HTC entry), except that this one has the
> eeprom on the second bus.
Last half of the sentence isn't true (leftover from v1).
> On this board, one side of this board is labeled with:
> dvbc v2.0
> The other side with:
> 94V-0, MO2, RK-4221 with huge digits: 1107
>
> With those patches, the board is properly detected:
>
> em28xx 1-1.5:1.0: New device TERRATEC TERRATCE H5 MKII @ 480 Mbps (0ccd:10b2, interface 0, class 0)
> em28xx 1-1.5:1.0: Audio interface 0 found (Vendor Class)
> em28xx 1-1.5:1.0: Video interface 0 found: isoc
> em28xx 1-1.5:1.0: DVB interface 0 found: isoc
> em28xx 1-1.5:1.0: chip ID is em2884
> em28xx eeprom 00000000: 26 00 00 00 02 0b 0f e5 f5 64 01 60 09 e5 f5 64 &........d.`...d
> em28xx eeprom 00000010: 09 60 03 c2 c6 22 e5 f7 b4 03 13 e5 f6 b4 87 03 .`..."..........
> em28xx eeprom 00000020: 02 0a b9 e5 f6 b4 93 03 02 09 46 c2 c6 22 c2 c6 ..........F.."..
> em28xx eeprom 00000030: 22 00 60 00 ef 70 08 85 3d 82 85 3c 83 93 ff ef ".`..p..=..<....
> em28xx eeprom 00000040: 60 19 85 3d 82 85 3c 83 e4 93 12 07 a3 12 0a fe `..=..<.........
> em28xx eeprom 00000050: 05 3d e5 3d 70 02 05 3c 1f 80 e4 22 12 0b 06 02 .=.=p..<..."....
> em28xx eeprom 00000060: 07 e2 01 00 1a eb 67 95 cd 0c b2 10 f0 13 6b 03 ......g.......k.
> em28xx eeprom 00000070: 98 22 6a 1c 86 12 27 57 4e 16 29 00 60 00 00 00 ."j...'WN.).`...
> em28xx eeprom 00000080: 02 00 00 00 5e 00 13 00 f0 10 44 82 82 00 00 00 ....^.....D.....
> em28xx eeprom 00000090: 5b 81 c0 00 00 00 20 40 20 80 02 20 10 01 00 00 [..... @ .. ....
> em28xx eeprom 000000a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
> em28xx eeprom 000000b0: c6 40 00 00 81 00 00 00 00 00 00 00 00 c4 00 00 .@..............
> em28xx eeprom 000000c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1c 03 ................
> em28xx eeprom 000000d0: 31 00 32 00 33 00 34 00 35 00 36 00 37 00 38 00 1.2.3.4.5.6.7.8.
> em28xx eeprom 000000e0: 39 00 41 00 42 00 43 00 44 00 12 03 54 00 45 00 9.A.B.C.D...T.E.
> em28xx eeprom 000000f0: 52 00 52 00 41 00 54 00 45 00 43 00 22 03 54 00 R.R.A.T.E.C.".T.
Ok, so the eeprom issue seems to be gone.
> em28xx 1-1.5:1.0: eeprom 000100: ... (skipped)
> em28xx 1-1.5:1.0: EEPROM ID = 26 00 00 00, EEPROM hash = 0xbcd5a8cf
> em28xx 1-1.5:1.0: EEPROM info:
> em28xx 1-1.5:1.0: microcode start address = 0x0004, boot configuration = 0x00
> em28xx 1-1.5:1.0: I2S audio, 5 sample rates
> em28xx 1-1.5:1.0: 500mA max power
> em28xx 1-1.5:1.0: Table at offset 0x27, strings=0x2298, 0x1c6a, 0x1286
> em28xx 1-1.5:1.0: Identified as Terratec Cinergy H6 rev. 2 (card=101)
> em28xx 1-1.5:1.0: Currently, V4L2 is not supported on this model
> em28xx 1-1.5:1.0: dvb set to isoc mode.
> usbcore: registered new interface driver em28xx
> em28xx 1-1.5:1.0: Binding audio extension
> em28xx 1-1.5:1.0: em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
> em28xx 1-1.5:1.0: em28xx-audio.c: Copyright (C) 2007-2016 Mauro Carvalho Chehab
> em28xx 1-1.5:1.0: Endpoint 0x83 high-speed on intf 0 alt 7 interval = 8, size 196
> em28xx 1-1.5:1.0: Number of URBs: 1, with 64 packets and 192 size
> em28xx 1-1.5:1.0: Audio extension successfully initialized
> em28xx: Registered (Em28xx Audio Extension) extension
> em28xx 1-1.5:1.0: Binding DVB extension
> drxk: status = 0x639260d9
> drxk: detected a drx-3926k, spin A3, xtal 20.250 MHz
> drxk: DRXK driver version 0.9.4300
> drxk: frontend initialized.
> tda18271 4-0060: creating new instance
> tda18271: TDA18271HD/C2 detected @ 4-0060
This confirms that the tuner is a tda18271, hence...
> dvbdev: DVB: registering new adapter (1-1.5:1.0)
> em28xx 1-1.5:1.0: DVB: registering adapter 0 frontend 0 (DRXK DVB-C DVB-T)...
> dvbdev: dvb_create_media_entity: media entity 'DRXK DVB-C DVB-T' registered.
> dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
> em28xx 1-1.5:1.0: DVB extension successfully initialized
> em28xx: Registered (Em28xx dvb Extension) extension
> em28xx 1-1.5:1.0: Registering input extension
> rc rc0: 1-1.5:1.0 IR as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.0/rc/rc0
> Registered IR keymap rc-nec-terratec-cinergy-xs
> input: 1-1.5:1.0 IR as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.0/rc/rc0/input0
> em28xx 1-1.5:1.0: Input extension successfully initalized
> em28xx: Registered (Em28xx Input Extension) extension
> tda18271: performing RF tracking filter calibration
> tda18271: RF tracking filter calibration complete
>
> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
> ---
> drivers/media/usb/em28xx/em28xx-cards.c | 18 ++++++++++++++++++
> drivers/media/usb/em28xx/em28xx-dvb.c | 1 +
> drivers/media/usb/em28xx/em28xx.h | 1 +
> 3 files changed, 20 insertions(+)
>
> diff --git a/drivers/media/usb/em28xx/em28xx-cards.c b/drivers/media/usb/em28xx/em28xx-cards.c
> index a12b599a1fa2..25e952b176ae 100644
> --- a/drivers/media/usb/em28xx/em28xx-cards.c
> +++ b/drivers/media/usb/em28xx/em28xx-cards.c
> @@ -1193,6 +1193,22 @@ struct em28xx_board em28xx_boards[] = {
> .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
> EM28XX_I2C_FREQ_400_KHZ,
> },
> + [EM2884_BOARD_TERRATEC_H6] = {
> + .name = "Terratec Cinergy H6 rev. 2",
> + .has_dvb = 1,
> + .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS,
> +#if 0
> + .tuner_type = TUNER_PHILIPS_TDA8290,
> + .tuner_addr = 0x41,
> + .dvb_gpio = terratec_h5_digital, /* FIXME: probably wrong */
> + .tuner_gpio = terratec_h5_gpio,
> +#else
> + .tuner_type = TUNER_ABSENT,
> +#endif
...this can be simplified at least to
#if 0
.dvb_gpio = terratec_h5_digital, /* FIXME: probably wrong */
.tuner_gpio = terratec_h5_gpio,
#endif
.tuner_type = TUNER_ABSENT, /* Digital-only TDA18271HD */
Getting the device tested completely would of course be preferable.
> + .def_i2c_bus = 1,
> + .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
> + EM28XX_I2C_FREQ_400_KHZ,
Hmm... that might explain why eeprom reading works now:
The initial test was made without any board data.
In that case the em28xx driver uses the default i2c speed of 100kHz.
The current timeout value EM28XX_I2C_XFER_TIMEOUT = 36ms might be enough
when running at 400kHz, but not when running at 100kHz.
Regards,
Frank
> + },
> [EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C] = {
> .name = "Hauppauge WinTV HVR 930C",
> .has_dvb = 1,
> @@ -2496,6 +2512,8 @@ struct usb_device_id em28xx_id_table[] = {
> .driver_info = EM2884_BOARD_TERRATEC_H5 },
> { USB_DEVICE(0x0ccd, 0x10b6), /* H5 Rev. 3 */
> .driver_info = EM2884_BOARD_TERRATEC_H5 },
> + { USB_DEVICE(0x0ccd, 0x10b2), /* H6 */
> + .driver_info = EM2884_BOARD_TERRATEC_H6 },
> { USB_DEVICE(0x0ccd, 0x0084),
> .driver_info = EM2860_BOARD_TERRATEC_AV350 },
> { USB_DEVICE(0x0ccd, 0x0096),
> diff --git a/drivers/media/usb/em28xx/em28xx-dvb.c b/drivers/media/usb/em28xx/em28xx-dvb.c
> index 82edd37f0d73..4a7db623fe29 100644
> --- a/drivers/media/usb/em28xx/em28xx-dvb.c
> +++ b/drivers/media/usb/em28xx/em28xx-dvb.c
> @@ -1522,6 +1522,7 @@ static int em28xx_dvb_init(struct em28xx *dev)
> break;
> case EM2884_BOARD_ELGATO_EYETV_HYBRID_2008:
> case EM2884_BOARD_CINERGY_HTC_STICK:
> + case EM2884_BOARD_TERRATEC_H6:
> terratec_htc_stick_init(dev);
>
> /* attach demodulator */
> diff --git a/drivers/media/usb/em28xx/em28xx.h b/drivers/media/usb/em28xx/em28xx.h
> index e8d97d5ec161..88084f24f033 100644
> --- a/drivers/media/usb/em28xx/em28xx.h
> +++ b/drivers/media/usb/em28xx/em28xx.h
> @@ -148,6 +148,7 @@
> #define EM28178_BOARD_PLEX_PX_BCUD 98
> #define EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB 99
> #define EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_01595 100
> +#define EM2884_BOARD_TERRATEC_H6 101
>
> /* Limits minimum and default number of buffers */
> #define EM28XX_MIN_BUF 4
@@ -1193,6 +1193,22 @@ struct em28xx_board em28xx_boards[] = {
.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_400_KHZ,
},
+ [EM2884_BOARD_TERRATEC_H6] = {
+ .name = "Terratec Cinergy H6 rev. 2",
+ .has_dvb = 1,
+ .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS,
+#if 0
+ .tuner_type = TUNER_PHILIPS_TDA8290,
+ .tuner_addr = 0x41,
+ .dvb_gpio = terratec_h5_digital, /* FIXME: probably wrong */
+ .tuner_gpio = terratec_h5_gpio,
+#else
+ .tuner_type = TUNER_ABSENT,
+#endif
+ .def_i2c_bus = 1,
+ .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
+ EM28XX_I2C_FREQ_400_KHZ,
+ },
[EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C] = {
.name = "Hauppauge WinTV HVR 930C",
.has_dvb = 1,
@@ -2496,6 +2512,8 @@ struct usb_device_id em28xx_id_table[] = {
.driver_info = EM2884_BOARD_TERRATEC_H5 },
{ USB_DEVICE(0x0ccd, 0x10b6), /* H5 Rev. 3 */
.driver_info = EM2884_BOARD_TERRATEC_H5 },
+ { USB_DEVICE(0x0ccd, 0x10b2), /* H6 */
+ .driver_info = EM2884_BOARD_TERRATEC_H6 },
{ USB_DEVICE(0x0ccd, 0x0084),
.driver_info = EM2860_BOARD_TERRATEC_AV350 },
{ USB_DEVICE(0x0ccd, 0x0096),
@@ -1522,6 +1522,7 @@ static int em28xx_dvb_init(struct em28xx *dev)
break;
case EM2884_BOARD_ELGATO_EYETV_HYBRID_2008:
case EM2884_BOARD_CINERGY_HTC_STICK:
+ case EM2884_BOARD_TERRATEC_H6:
terratec_htc_stick_init(dev);
/* attach demodulator */
@@ -148,6 +148,7 @@
#define EM28178_BOARD_PLEX_PX_BCUD 98
#define EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB 99
#define EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_01595 100
+#define EM2884_BOARD_TERRATEC_H6 101
/* Limits minimum and default number of buffers */
#define EM28XX_MIN_BUF 4