staging/media: make atomisp vlv2_plat_clock explicitly non-modular
Commit Message
The Makefile / Kconfig currently controlling compilation of this code is:
clock/Makefile:obj-$(CONFIG_INTEL_ATOMISP) += vlv2_plat_clock.o
atomisp/Kconfig:menuconfig INTEL_ATOMISP
atomisp/Kconfig: bool "Enable support to Intel MIPI camera drivers"
...meaning that it currently is not being built as a module by anyone.
Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.
Since module_init was already not in use by this driver, the init
ordering remains unchanged with this commit.
Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.
We also delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Alan Cox <alan@linux.intel.com>
Cc: linux-media@vger.kernel.org
Cc: devel@driverdev.osuosl.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
---
.../media/atomisp/platform/clock/vlv2_plat_clock.c | 21 +--------------------
1 file changed, 1 insertion(+), 20 deletions(-)
Comments
On Wed, Apr 12, 2017 at 09:57:55PM -0400, Paul Gortmaker wrote:
> The Makefile / Kconfig currently controlling compilation of this code is:
>
> clock/Makefile:obj-$(CONFIG_INTEL_ATOMISP) += vlv2_plat_clock.o
>
> atomisp/Kconfig:menuconfig INTEL_ATOMISP
> atomisp/Kconfig: bool "Enable support to Intel MIPI camera drivers"
>
> ...meaning that it currently is not being built as a module by anyone.
>
> Lets remove the modular code that is essentially orphaned, so that
> when reading the driver there is no doubt it is builtin-only.
>
> Since module_init was already not in use by this driver, the init
> ordering remains unchanged with this commit.
>
> Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.
>
> We also delete the MODULE_LICENSE tag etc. since all that information
> is already contained at the top of the file in the comments.
>
> Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: Alan Cox <alan@linux.intel.com>
> Cc: linux-media@vger.kernel.org
> Cc: devel@driverdev.osuosl.org
> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
I'm pretty sure we want this code to be built as a module, so maybe a
Kconfig change would resolve the issue instead?
Alan, any thoughts?
thanks,
greg k-h
[Re: [PATCH] staging/media: make atomisp vlv2_plat_clock explicitly non-modular] On 14/04/2017 (Fri 10:12) Greg Kroah-Hartman wrote:
> On Wed, Apr 12, 2017 at 09:57:55PM -0400, Paul Gortmaker wrote:
> > The Makefile / Kconfig currently controlling compilation of this code is:
> >
> > clock/Makefile:obj-$(CONFIG_INTEL_ATOMISP) += vlv2_plat_clock.o
> >
> > atomisp/Kconfig:menuconfig INTEL_ATOMISP
> > atomisp/Kconfig: bool "Enable support to Intel MIPI camera drivers"
> >
> > ...meaning that it currently is not being built as a module by anyone.
[...]
> I'm pretty sure we want this code to be built as a module, so maybe a
> Kconfig change would resolve the issue instead?
As always, I'm good with things being moved to tristate if there is a use case
for it. I will note that in this case however, that the above Kconfig option
is not specific to this file/driver. It is controlling the inclusion of
several dirs/files, and so a more fine grained Kconfig may be required if some
are to be built-in and some are to be tristate...
P.
~/git/linux-head/drivers/staging/media/atomisp$ git grep 'obj.*INTEL_ATOMISP'
Makefile:obj-$(CONFIG_INTEL_ATOMISP) += pci/
Makefile:obj-$(CONFIG_INTEL_ATOMISP) += i2c/
Makefile:obj-$(CONFIG_INTEL_ATOMISP) += platform/
platform/Makefile:obj-$(CONFIG_INTEL_ATOMISP) += clock/
platform/Makefile:obj-$(CONFIG_INTEL_ATOMISP) += intel-mid/
platform/clock/Makefile:obj-$(CONFIG_INTEL_ATOMISP) += vlv2_plat_clock.o
platform/clock/Makefile:obj-$(CONFIG_INTEL_ATOMISP) += platform_vlv2_plat_clk.o
platform/intel-mid/Makefile:obj-$(CONFIG_INTEL_ATOMISP) += intel_mid_pcihelpers.o
platform/intel-mid/Makefile:obj-$(CONFIG_INTEL_ATOMISP) += atomisp_gmin_platform.o
>
> Alan, any thoughts?
>
> thanks,
>
> greg k-h
> I'm pretty sure we want this code to be built as a module, so maybe a
> Kconfig change would resolve the issue instead?
>
> Alan, any thoughts?
It's a tiny chunk of platform helper code. It probably ultimately
belongs in arch/x86 somewhere or folded into the driver. At the moment
it won't build modular.
I'm fine with the change, it strips out more pointless code so helps
see what tiny bits of code in there are actually used for anything
real.
Alan
@@ -21,7 +21,7 @@
#include <linux/err.h>
#include <linux/io.h>
-#include <linux/module.h>
+#include <linux/init.h>
#include <linux/platform_device.h>
#include "../../include/linux/vlv2_plat_clock.h"
@@ -205,18 +205,10 @@ static int vlv2_plat_clk_probe(struct platform_device *pdev)
return 0;
}
-static int vlv2_plat_clk_remove(struct platform_device *pdev)
-{
- iounmap(pmc_base);
- pmc_base = NULL;
- return 0;
-}
-
static const struct platform_device_id vlv2_plat_clk_id[] = {
{"vlv2_plat_clk", 0},
{}
};
-MODULE_DEVICE_TABLE(platform, vlv2_plat_clk_id);
static int vlv2_resume(struct device *device)
{
@@ -241,7 +233,6 @@ static const struct dev_pm_ops vlv2_pm_ops = {
static struct platform_driver vlv2_plat_clk_driver = {
.probe = vlv2_plat_clk_probe,
- .remove = vlv2_plat_clk_remove,
.id_table = vlv2_plat_clk_id,
.driver = {
.name = "vlv2_plat_clk",
@@ -254,13 +245,3 @@ static int __init vlv2_plat_clk_init(void)
return platform_driver_register(&vlv2_plat_clk_driver);
}
arch_initcall(vlv2_plat_clk_init);
-
-static void __exit vlv2_plat_clk_exit(void)
-{
- platform_driver_unregister(&vlv2_plat_clk_driver);
-}
-module_exit(vlv2_plat_clk_exit);
-
-MODULE_AUTHOR("Asutosh Pathak <asutosh.pathak@intel.com>");
-MODULE_DESCRIPTION("Intel VLV2 platform clock driver");
-MODULE_LICENSE("GPL v2");