[v5,4/5,media] dt-bindings: add TI VPIF documentation

  Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
---
 .../devicetree/bindings/media/ti,da850-vpif.txt    | 67 ++++++++++++++++++++++
 1 file changed, 67 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/ti,da850-vpif.txt
  

Hi Kevin,

Thank you for the patch.

On Tuesday 06 Dec 2016 21:08:25 Kevin Hilman wrote:
> Acked-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
> ---
> .../devicetree/bindings/media/ti,da850-vpif.txt    | 67 +++++++++++++++++++
> 1 file changed, 67 insertions(+)
> create mode 100644
> Documentation/devicetree/bindings/media/ti,da850-vpif.txt
> 
> diff --git a/Documentation/devicetree/bindings/media/ti,da850-vpif.txt
> b/Documentation/devicetree/bindings/media/ti,da850-vpif.txt new file mode
> 100644
> index 000000000000..fa06dfdb6898
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/ti,da850-vpif.txt
> @@ -0,0 +1,67 @@
> +Texas Instruments VPIF
> +----------------------
> +
> +The TI Video Port InterFace (VPIF) is the primary component for video
> +capture and display on the DA850/AM18x family of TI DaVinci/Sitara
> +SoCs.
> +
> +TI Document reference: SPRUH82C, Chapter 35
> +http://www.ti.com/lit/pdf/spruh82
> +
> +Required properties:
> +- compatible: must be "ti,da850-vpif"
> +- reg: physical base address and length of the registers set for the
> device;
> +- interrupts: should contain IRQ line for the VPIF
> +
> +Video Capture:
> +
> +VPIF has a 16-bit parallel bus input, supporting 2 8-bit channels or a
> +single 16-bit channel.  It should contain at least one port child node
> +with child 'endpoint' node. Please refer to the bindings defined in
> +Documentation/devicetree/bindings/media/video-interfaces.txt.

You might want to clarify how endpoints are use in the two cases. Apart from 
that,

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> +Example using 2 8-bit input channels, one of which is connected to an
> +I2C-connected TVP5147 decoder:
> +
> +	vpif: vpif@217000 {
> +		compatible = "ti,da850-vpif";
> +		reg = <0x217000 0x1000>;
> +		interrupts = <92>;
> +
> +		port {
> +			vpif_ch0: endpoint@0 {
> +				  reg = <0>;
> +				  bus-width = <8>;
> +				  remote-endpoint = <&composite>;
> +			};
> +
> +			vpif_ch1: endpoint@1 {
> +				  reg = <1>;
> +				  bus-width = <8>;
> +				  data-shift = <8>;
> +			};
> +		};
> +	};
> +
> +[ ... ]
> +
> +&i2c0 {
> +
> +	tvp5147@5d {
> +		compatible = "ti,tvp5147";
> +		reg = <0x5d>;
> +		status = "okay";
> +
> +		port {
> +			composite: endpoint {
> +				hsync-active = <1>;
> +				vsync-active = <1>;
> +				pclk-sample = <0>;
> +
> +				/* VPIF channel 0 (lower 8-bits) */
> +				remote-endpoint = <&vpif_ch0>;
> +				bus-width = <8>;
> +			};
> +		};
> +	};
> +};
  

Laurent Pinchart <laurent.pinchart@ideasonboard.com> writes:

> Hi Kevin,
>
> Thank you for the patch.
>
> On Tuesday 06 Dec 2016 21:08:25 Kevin Hilman wrote:
>> Acked-by: Rob Herring <robh@kernel.org>
>> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
>> ---
>> .../devicetree/bindings/media/ti,da850-vpif.txt    | 67 +++++++++++++++++++
>> 1 file changed, 67 insertions(+)
>> create mode 100644
>> Documentation/devicetree/bindings/media/ti,da850-vpif.txt
>> 
>> diff --git a/Documentation/devicetree/bindings/media/ti,da850-vpif.txt
>> b/Documentation/devicetree/bindings/media/ti,da850-vpif.txt new file mode
>> 100644
>> index 000000000000..fa06dfdb6898
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/media/ti,da850-vpif.txt
>> @@ -0,0 +1,67 @@
>> +Texas Instruments VPIF
>> +----------------------
>> +
>> +The TI Video Port InterFace (VPIF) is the primary component for video
>> +capture and display on the DA850/AM18x family of TI DaVinci/Sitara
>> +SoCs.
>> +
>> +TI Document reference: SPRUH82C, Chapter 35
>> +http://www.ti.com/lit/pdf/spruh82
>> +
>> +Required properties:
>> +- compatible: must be "ti,da850-vpif"
>> +- reg: physical base address and length of the registers set for the
>> device;
>> +- interrupts: should contain IRQ line for the VPIF
>> +
>> +Video Capture:
>> +
>> +VPIF has a 16-bit parallel bus input, supporting 2 8-bit channels or a
>> +single 16-bit channel.  It should contain at least one port child node
>> +with child 'endpoint' node. Please refer to the bindings defined in
>> +Documentation/devicetree/bindings/media/video-interfaces.txt.
>
> You might want to clarify how endpoints are use in the two cases. Apart from 
> that,

OK, I'll add another example for the 16-bit case.  Something like...

>> +Example using 2 8-bit input channels, one of which is connected to an
>> +I2C-connected TVP5147 decoder:
>> +
>> +	vpif: vpif@217000 {
>> +		compatible = "ti,da850-vpif";
>> +		reg = <0x217000 0x1000>;
>> +		interrupts = <92>;
>> +
>> +		port {
>> +			vpif_ch0: endpoint@0 {
>> +				  reg = <0>;
>> +				  bus-width = <8>;
>> +				  remote-endpoint = <&composite>;
>> +			};
>> +
>> +			vpif_ch1: endpoint@1 {
>> +				  reg = <1>;
>> +				  bus-width = <8>;
>> +				  data-shift = <8>;
>> +			};
>> +		};
>> +	};
>> +
>> +[ ... ]
>> +
>> +&i2c0 {
>> +
>> +	tvp5147@5d {
>> +		compatible = "ti,tvp5147";
>> +		reg = <0x5d>;
>> +		status = "okay";
>> +
>> +		port {
>> +			composite: endpoint {
>> +				hsync-active = <1>;
>> +				vsync-active = <1>;
>> +				pclk-sample = <0>;
>> +
>> +				/* VPIF channel 0 (lower 8-bits) */
>> +				remote-endpoint = <&vpif_ch0>;
>> +				bus-width = <8>;
>> +			};
>> +		};
>> +	};
>> +};

...this, at the end of the binding doc:

Alternatively, an example when the bus is configured as a single
16-bit input (e.g. for raw-capture mode):

	vpif: vpif@217000 {
		compatible = "ti,da850-vpif";
		reg = <0x217000 0x1000>;
		interrupts = <92>;

		port {
			vpif_ch0: endpoint {
				  bus-width = <16>;
			};
		};
	};


Thanks for the review,

Kevin
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html