new file mode 100644
@@ -0,0 +1,9 @@
+config VIDEO_MRST_FLASH
+ tristate "Moorestown flash"
+ depends on I2C && VIDEO_MRST_ISP
+
+ ---help---
+ Say Y here if your platform support moorestown flash.
+
+ To compile this driver as a module, choose M here: the
+ module will be called mrstov2650.ko.
new file mode 100644
@@ -0,0 +1,3 @@
+obj-$(CONFIG_VIDEO_MRST_FLASH) += mrstflash.o
+
+EXTRA_CFLAGS += -I$(src)/../include
new file mode 100644
@@ -0,0 +1,150 @@
+/*
+ * Support for Moorestown Langwell Camera Imaging camera flash.
+ *
+ * Copyright (c) 2009 Intel Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * Xiaolin Zhang <xiaolin.zhang@intel.com>
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/kmod.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-chip-ident.h>
+#include <media/v4l2-i2c-drv.h>
+
+static int debug;
+module_param(debug, bool, 0644);
+MODULE_PARM_DESC(debug, "Debug level (0-1)");
+
+MODULE_AUTHOR("Xiaolin Zhang <xiaolin.zhang@intel.com>");
+MODULE_DESCRIPTION("A low-level driver for mrst flash");
+MODULE_LICENSE("GPL");
+
+static int flash_g_chip_ident(struct v4l2_subdev *sd,
+ struct v4l2_dbg_chip_ident *chip)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+ #define V4L2_IDENT_MRST_FLASH 8248
+ return v4l2_chip_ident_i2c_client(client, chip,
+ V4L2_IDENT_MRST_FLASH, 0);
+}
+
+static const struct v4l2_subdev_core_ops flash_core_ops = {
+ .g_chip_ident = flash_g_chip_ident,
+};
+static const struct v4l2_subdev_ops flash_ops = {
+ .core = &flash_core_ops,
+};
+
+static int flash_detect(struct i2c_client *client)
+{
+ struct i2c_adapter *adapter = client->adapter;
+ u8 pid;
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+ return -ENODEV;
+
+ if (adapter->nr != 0)
+ return -ENODEV;
+
+ pid = i2c_smbus_read_byte_data(client, 0x10);
+ if (pid == 0x18) {
+ printk(KERN_ERR "camera flash device found\n");
+ v4l_dbg(1, debug, client, "found camera flash device");
+ } else {
+ printk(KERN_ERR "no camera flash device found\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static int flash_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ u8 pid, ver;
+ int ret = -1;
+ struct v4l2_subdev *sd;
+
+ v4l_info(client, "chip found @ 0x%x (%s)\n",
+ client->addr << 1, client->adapter->name);
+
+ sd = kzalloc(sizeof(struct v4l2_subdev), GFP_KERNEL);
+ ret = flash_detect(client);
+ if (ret)
+ return -ENODEV;
+
+ v4l2_i2c_subdev_init(sd, client, &flash_ops);
+
+ ver = i2c_smbus_read_byte_data(client, 0x50);
+ v4l_dbg(1, debug, client, "detect:CST from device is 0x%x", ver);
+ pid = i2c_smbus_read_byte_data(client, 0x20);
+ v4l_dbg(1, debug, client, "detect:MFPC from device is 0x%x", pid);
+ pid = i2c_smbus_read_byte_data(client, 0xA0);
+ v4l_dbg(1, debug, client, "detect:TCC from device is 0x%x", pid);
+ pid = i2c_smbus_read_byte_data(client, 0xB0);
+ v4l_dbg(1, debug, client, "detect:FCC from device is 0x%x", pid);
+ pid = i2c_smbus_read_byte_data(client, 0xC0);
+ v4l_dbg(1, debug, client, "detect:FDC from device is 0x%x", pid);
+ i2c_smbus_write_byte_data(client, 0xc0, 0xff); /*set FST to 1000us*/
+ pid = i2c_smbus_read_byte_data(client, 0xc0);
+ v4l_dbg(1, debug, client, "FDC from device is 0x%x", pid);
+
+ v4l_dbg(1, debug, client,
+ "successfully load camera flash device driver");
+ return 0;
+}
+
+static int flash_remove(struct i2c_client *client)
+{
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
+
+ v4l2_device_unregister_subdev(sd);
+
+ return 0;
+}
+
+static const struct i2c_device_id flash_id[] = {
+ {"mrst_camera_flash", 0},
+ {}
+};
+
+MODULE_DEVICE_TABLE(i2c, flash_id);
+
+static struct v4l2_i2c_driver_data v4l2_i2c_data = {
+ .name = "mrst_camera_flash",
+ .probe = flash_probe,
+ .remove = flash_remove,
+ .id_table = flash_id,
+};