[08/11] add vbi code for tlg2300

  This is the vbi module for tlg2300.

Signed-off-by: Huang Shijie <shijie8@gmail.com>
---
 drivers/media/video/tlg2300/pd-vbi.c |  183 ++++++++++++++++++++++++++++++++++
 1 files changed, 183 insertions(+), 0 deletions(-)
 create mode 100644 drivers/media/video/tlg2300/pd-vbi.c
  

Huang Shijie wrote:
> This is the vbi module for tlg2300.
> 
> Signed-off-by: Huang Shijie <shijie8@gmail.com>
> ---
>  drivers/media/video/tlg2300/pd-vbi.c |  183 ++++++++++++++++++++++++++++++++++
>  1 files changed, 183 insertions(+), 0 deletions(-)
>  create mode 100644 drivers/media/video/tlg2300/pd-vbi.c
> 
> diff --git a/drivers/media/video/tlg2300/pd-vbi.c b/drivers/media/video/tlg2300/pd-vbi.c
> new file mode 100644
> index 0000000..fb9ee0d
> --- /dev/null
> +++ b/drivers/media/video/tlg2300/pd-vbi.c
> @@ -0,0 +1,183 @@
> +#include <linux/kernel.h>
> +#include <linux/usb.h>
> +#include <linux/kref.h>
> +#include <linux/uaccess.h>
> +#include <linux/mm.h>
> +#include <linux/vmalloc.h>
> +#include <linux/version.h>
> +#include <media/v4l2-common.h>
> +#include <linux/types.h>
> +#include <media/v4l2-dev.h>
> +#include <linux/fs.h>
> +#include <linux/poll.h>
> +#include <linux/slab.h>
> +#include <linux/string.h>
> +#include <linux/unistd.h>
> +
> +#include "vendorcmds.h"
> +#include "pd-common.h"
> +
> +int vbi_request_buf(struct vbi_data *vbi_data, size_t size)
> +{
> +	int i, count = 4;
> +
> +	pd_bufqueue_init(&vbi_data->vbi_queue, &count, size, KERNEL_MEM);
> +
> +	for (i = 0; i < count; i++)
> +		pd_bufqueue_qbuf(&vbi_data->vbi_queue, i);
> +
> +	vbi_data->buf_count = count;
> +	return 0;
> +}
> +
> +int vbi_release_buf(struct vbi_data *vbi_data)
> +{
> +	if (vbi_data->buf_count) {
> +		pd_bufqueue_cleanup(&vbi_data->vbi_queue);
> +		pd_bufqueue_wakeup(&vbi_data->vbi_queue);
> +		vbi_data->buf_count = 0;
> +	}
> +	return 0;
> +}
> +
> +static long vbi_v4l2_ioctl(struct file *file,
> +			u32 cmd, unsigned long argp)
> +{

No. You should use struct v4l2_ioctl_ops for the ioctls. It should be noticed
that VBI setup should happen on _any_ V4L interface. So, the same ioctl that
sets video, should also set VBI.

So, the code bellow should be merged with the video part of the driver.


> +	struct poseidon *pd = file->private_data;
> +	int ret = 0;
> +
> +	mutex_lock(&pd->lock);
> +	switch (cmd) {
> +	case VIDIOC_QUERYCAP: {
> +		struct v4l2_capability *t_cap = (struct v4l2_capability *)argp;
> +
> +		strcpy(t_cap->driver, "Telegent Driver");
> +		strcpy(t_cap->card, "Telegent Poseidon");
> +		strcpy(t_cap->bus_info, "USB bus");
> +		t_cap->version = 0;
> +		t_cap->capabilities = V4L2_CAP_VBI_CAPTURE;
> +	}
> +		break;
> +
> +	case VIDIOC_S_FMT:
> +	case VIDIOC_G_FMT: {
> +		struct v4l2_format *v4l2_f = (struct v4l2_format *)argp;
> +
> +		v4l2_f->fmt.vbi.sampling_rate = 6750000 * 4;
> +		v4l2_f->fmt.vbi.samples_per_line = 720*2/* VBI_LINE_LENGTH */;
> +		v4l2_f->fmt.vbi.sample_format = V4L2_PIX_FMT_GREY;
> +		v4l2_f->fmt.vbi.offset = 64 * 4;  /*FIXME: why offset */
> +		if (pd->video_data.tvnormid & V4L2_STD_525_60) {
> +			v4l2_f->fmt.vbi.start[0] = 10;
> +			v4l2_f->fmt.vbi.start[1] = 264;
> +			v4l2_f->fmt.vbi.count[0] = V4L_NTSC_VBI_LINES;
> +			v4l2_f->fmt.vbi.count[1] = V4L_NTSC_VBI_LINES;
> +		} else {
> +			v4l2_f->fmt.vbi.start[0] = 6;
> +			v4l2_f->fmt.vbi.start[1] = 314;
> +			v4l2_f->fmt.vbi.count[0] = V4L_PAL_VBI_LINES;
> +			v4l2_f->fmt.vbi.count[1] = V4L_PAL_VBI_LINES;
> +		}
> +		/* VBI_UNSYNC VBI_INTERLACED */
> +		v4l2_f->fmt.vbi.flags = V4L2_VBI_UNSYNC;
> +	}
> +		break;
> +
> +	default:
> +		ret = -EINVAL;
> +	}
> +	mutex_unlock(&pd->lock);
> +	return ret;
> +}
> +
> +static ssize_t vbi_read(struct file *file, char __user *buffer,
> +			size_t count, loff_t *ppos)
> +{
> +	struct poseidon *pd = file->private_data;
> +	struct vbi_data *vbi = &pd->vbi_data;
> +
> +	return vbi->buf_count ?
> +		pd_bufqueue_read(&vbi->vbi_queue, file->f_flags, buffer, count)
> +		: -EINVAL;
> +}
> +
> +static int vbi_open(struct file *file)
> +{
> +	int ret = 0;
> +	struct video_device *vd = video_devdata(file);
> +	struct poseidon *pd = video_get_drvdata(vd);
> +
> +	if (!pd)
> +		return -ENODEV;
> +
> +	mutex_lock(&pd->lock);
> +	if (pd->state & POSEIDON_STATE_DISCONNECT) {
> +		ret = -ENODEV;
> +		goto out;
> +	}
> +	kref_get(&pd->kref);
> +	file->private_data = pd;
> +	set_debug_mode(vd, debug_mode);
> +out:
> +	mutex_unlock(&pd->lock);
> +	return ret;
> +}
> +
> +static int vbi_release(struct file *file)
> +{
> +	struct poseidon *pd = file->private_data;
> +
> +	if (!pd)
> +		return -ENODEV;
> +
> +	kref_put(&pd->kref, poseidon_delete);
> +	return 0;
> +}
> +
> +static const struct v4l2_file_operations vbi_file_ops = {
> +	.owner        = THIS_MODULE,
> +	.open         = vbi_open,
> +	.release      = vbi_release,
> +	.read         = vbi_read,
> +	.ioctl        = vbi_v4l2_ioctl,
> +};
> +
> +static struct video_device vbi_device = {
> +	.name		= "poseidon_vbi",
> +	.fops		= &vbi_file_ops,
> +	.release	=  video_device_release,
> +};
> +
> +int vbi_init(struct poseidon *pd)
> +{
> +	int ret = 0;
> +
> +	memset(&(pd->vbi_data), 0, sizeof(struct vbi_data));
> +
> +	pd->vbi_data.vbi_dev = vdev_init(pd, &vbi_device);
> +	if (pd->vbi_data.vbi_dev == NULL) {
> +		ret = -ENOMEM;
> +		goto vbi_error;
> +	}
> +
> +	if (video_register_device(pd->vbi_data.vbi_dev, VFL_TYPE_VBI, -1) < 0) {
> +		video_device_release(pd->vbi_data.vbi_dev);
> +		pd->vbi_data.vbi_dev = NULL;
> +		printk(KERN_DEBUG"vbi_init : video device register failed\n");
> +		ret = -1;
> +	}
> +
> +vbi_error:
> +	return ret;
> +}
> +
> +int vbi_exit(struct poseidon *pd)
> +{
> +	struct vbi_data *vbi_data = &pd->vbi_data;
> +
> +	if (vbi_data->vbi_dev) {
> +		video_unregister_device(vbi_data->vbi_dev);
> +		vbi_data->vbi_dev = NULL;
> +	}
> +	return 0;
> +}

--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html