[1/2] au0828: remove forced dependency of VIDEO_AU0828 on VIDEO_V4L2
Commit Message
This patch removes the dependendency of VIDEO_AU0828 on VIDEO_V4L2 by
creating a new Kconfig option, VIDEO_AU0828_V4L2, which enables analog
video capture support and depends on VIDEO_V4L2 itself.
With VIDEO_AU0828_V4L2 disabled, the driver will only support digital
television and will not depend on the v4l2-core. With VIDEO_AU0828_V4L2
enabled, the driver will be built with the analog v4l2 support included.
By default, the VIDEO_AU0828_V4L2 option will be set to Y, so as to
preserve the original behavior.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
---
drivers/media/usb/Kconfig | 2 +-
drivers/media/usb/au0828/Kconfig | 17 ++++++++++++++---
drivers/media/usb/au0828/Makefile | 6 +++++-
drivers/media/usb/au0828/au0828-cards.c | 4 ++++
drivers/media/usb/au0828/au0828-core.c | 13 ++++++++++++-
drivers/media/usb/au0828/au0828-i2c.c | 4 ++++
drivers/media/usb/au0828/au0828.h | 2 ++
7 files changed, 42 insertions(+), 6 deletions(-)
Comments
On Tue, Dec 4, 2012 at 11:07 AM, Michael Krufky <mkrufky@linuxtv.org> wrote:
> This patch removes the dependendency of VIDEO_AU0828 on VIDEO_V4L2 by
> creating a new Kconfig option, VIDEO_AU0828_V4L2, which enables analog
> video capture support and depends on VIDEO_V4L2 itself.
>
> With VIDEO_AU0828_V4L2 disabled, the driver will only support digital
> television and will not depend on the v4l2-core. With VIDEO_AU0828_V4L2
> enabled, the driver will be built with the analog v4l2 support included.
Hi Mike,
This is generally good stuff. A couple of thoughts.
It seems that this driver effectively takes the approach which is the
exact reverse of all the other hybrid drivers - it mandates DVB with
V4L as optional, whereas most of the other drivers mandate V4L with
DVB is optional. Now I recognize that in this case it was done
because of some specific business need -- however I have to wonder if
the moving around of all the code to no longer be "video" vs. "dvb"
specific could be leveraged to allow users to select either condition
- to select DVB, V4L, or both.
This seems like the direction things are going in -- we've
restructured the tree based on bus interface type (pci/usb/etc) rather
than v4l versus dvb. This might be an opportunity to define the model
for how other hybrid devices could also be refactored to not have V4L
or DVB if not needed.
Devin
On Tue, Dec 4, 2012 at 11:17 AM, Devin Heitmueller
<dheitmueller@kernellabs.com> wrote:
> On Tue, Dec 4, 2012 at 11:07 AM, Michael Krufky <mkrufky@linuxtv.org> wrote:
>> This patch removes the dependendency of VIDEO_AU0828 on VIDEO_V4L2 by
>> creating a new Kconfig option, VIDEO_AU0828_V4L2, which enables analog
>> video capture support and depends on VIDEO_V4L2 itself.
>>
>> With VIDEO_AU0828_V4L2 disabled, the driver will only support digital
>> television and will not depend on the v4l2-core. With VIDEO_AU0828_V4L2
>> enabled, the driver will be built with the analog v4l2 support included.
>
> Hi Mike,
>
> This is generally good stuff. A couple of thoughts.
>
> It seems that this driver effectively takes the approach which is the
> exact reverse of all the other hybrid drivers - it mandates DVB with
> V4L as optional, whereas most of the other drivers mandate V4L with
> DVB is optional. Now I recognize that in this case it was done
> because of some specific business need -- however I have to wonder if
> the moving around of all the code to no longer be "video" vs. "dvb"
> specific could be leveraged to allow users to select either condition
> - to select DVB, V4L, or both.
>
> This seems like the direction things are going in -- we've
> restructured the tree based on bus interface type (pci/usb/etc) rather
> than v4l versus dvb. This might be an opportunity to define the model
> for how other hybrid devices could also be refactored to not have V4L
> or DVB if not needed.
Thanks for your comments, Devin. I agree with you that it would be
nice to be able to choose to disable DVB just like how we can disable
V4L, but the reason why I did this to V4L first was not simply due to
the business need -- I did this because of how easy it was to do. The
driver was originally developed as a DVB-only driver, and later analog
support was added to it (by you ;-) ). As a result, conditionalizing
the analog support was rather easy. Doing the same for DVB would
probably not be very difficult either, but I also believe in small
patches and gradual changes.
These patches allow us to build the au0828 driver (and its
dependencies) without the need for the v4l-core. This is especially
helpful when backporting digital support to older kernels without the
need to muck through the v4l2 api changes.
Do you have any issues with these two patches as-is? Any suggestions?
If not, is it OK with you if I request that Mauro merge this for v3.9
?
Cheers,
Mike Krufky
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Dec 4, 2012 at 11:25 AM, Michael Krufky <mkrufky@linuxtv.org> wrote:
> Do you have any issues with these two patches as-is? Any suggestions?
> If not, is it OK with you if I request that Mauro merge this for v3.9
> ?
I have no specific issues with the patch as-is.
Reviewed-by: Devin Heitmueller <dheitmueller@kernellabs.com>
@@ -21,7 +21,6 @@ endif
if MEDIA_ANALOG_TV_SUPPORT
comment "Analog TV USB devices"
-source "drivers/media/usb/au0828/Kconfig"
source "drivers/media/usb/pvrusb2/Kconfig"
source "drivers/media/usb/hdpvr/Kconfig"
source "drivers/media/usb/tlg2300/Kconfig"
@@ -31,6 +30,7 @@ endif
if (MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT)
comment "Analog/digital TV USB devices"
+source "drivers/media/usb/au0828/Kconfig"
source "drivers/media/usb/cx231xx/Kconfig"
source "drivers/media/usb/tm6000/Kconfig"
endif
@@ -1,17 +1,28 @@
config VIDEO_AU0828
tristate "Auvitek AU0828 support"
- depends on I2C && INPUT && DVB_CORE && USB && VIDEO_V4L2
+ depends on I2C && INPUT && DVB_CORE && USB
select I2C_ALGOBIT
select VIDEO_TVEEPROM
select VIDEOBUF_VMALLOC
select DVB_AU8522_DTV if MEDIA_SUBDRV_AUTOSELECT
- select DVB_AU8522_V4L if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_XC5000 if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_MXL5007T if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_TDA18271 if MEDIA_SUBDRV_AUTOSELECT
---help---
- This is a video4linux driver for Auvitek's USB device.
+ This is a hybrid analog/digital tv capture driver for
+ Auvitek's AU0828 USB device.
To compile this driver as a module, choose M here: the
module will be called au0828
+
+config VIDEO_AU0828_V4L2
+ bool "Auvitek AU0828 v4l2 analog video support"
+ depends on VIDEO_AU0828 && VIDEO_V4L2
+ select DVB_AU8522_V4L if MEDIA_SUBDRV_AUTOSELECT
+ default y
+ ---help---
+ This is a video4linux driver for Auvitek's USB device.
+
+ Choose Y here to include support for v4l2 analog video
+ capture within the au0828 driver.
@@ -1,4 +1,8 @@
-au0828-objs := au0828-core.o au0828-i2c.o au0828-cards.o au0828-dvb.o au0828-video.o au0828-vbi.o
+au0828-objs := au0828-core.o au0828-i2c.o au0828-cards.o au0828-dvb.o
+
+ifeq ($(CONFIG_VIDEO_AU0828_V4L2),y)
+ au0828-objs += au0828-video.o au0828-vbi.o
+endif
obj-$(CONFIG_VIDEO_AU0828) += au0828.o
@@ -188,9 +188,11 @@ static void hauppauge_eeprom(struct au0828_dev *dev, u8 *eeprom_data)
void au0828_card_setup(struct au0828_dev *dev)
{
static u8 eeprom[256];
+#ifdef CONFIG_VIDEO_AU0828_V4L2
struct tuner_setup tun_setup;
struct v4l2_subdev *sd;
unsigned int mode_mask = T_ANALOG_TV;
+#endif
dprintk(1, "%s()\n", __func__);
@@ -211,6 +213,7 @@ void au0828_card_setup(struct au0828_dev *dev)
break;
}
+#ifdef CONFIG_VIDEO_AU0828_V4L2
if (AUVI_INPUT(0).type != AU0828_VMUX_UNDEFINED) {
/* Load the analog demodulator driver (note this would need to
be abstracted out if we ever need to support a different
@@ -236,6 +239,7 @@ void au0828_card_setup(struct au0828_dev *dev)
v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr,
&tun_setup);
}
+#endif
}
/*
@@ -134,13 +134,17 @@ static void au0828_usb_disconnect(struct usb_interface *interface)
/* Digital TV */
au0828_dvb_unregister(dev);
+#ifdef CONFIG_VIDEO_AU0828_V4L2
if (AUVI_INPUT(0).type != AU0828_VMUX_UNDEFINED)
au0828_analog_unregister(dev);
+#endif
/* I2C */
au0828_i2c_unregister(dev);
+#ifdef CONFIG_VIDEO_AU0828_V4L2
v4l2_device_unregister(&dev->v4l2_dev);
+#endif
usb_set_intfdata(interface, NULL);
@@ -155,7 +159,10 @@ static void au0828_usb_disconnect(struct usb_interface *interface)
static int au0828_usb_probe(struct usb_interface *interface,
const struct usb_device_id *id)
{
- int ifnum, retval;
+ int ifnum;
+#ifdef CONFIG_VIDEO_AU0828_V4L2
+ int retval;
+#endif
struct au0828_dev *dev;
struct usb_device *usbdev = interface_to_usbdev(interface);
@@ -194,6 +201,7 @@ static int au0828_usb_probe(struct usb_interface *interface,
dev->usbdev = usbdev;
dev->boardnr = id->driver_info;
+#ifdef CONFIG_VIDEO_AU0828_V4L2
/* Create the v4l2_device */
retval = v4l2_device_register(&interface->dev, &dev->v4l2_dev);
if (retval) {
@@ -203,6 +211,7 @@ static int au0828_usb_probe(struct usb_interface *interface,
kfree(dev);
return -EIO;
}
+#endif
/* Power Up the bridge */
au0828_write(dev, REG_600, 1 << 4);
@@ -216,9 +225,11 @@ static int au0828_usb_probe(struct usb_interface *interface,
/* Setup */
au0828_card_setup(dev);
+#ifdef CONFIG_VIDEO_AU0828_V4L2
/* Analog TV */
if (AUVI_INPUT(0).type != AU0828_VMUX_UNDEFINED)
au0828_analog_register(dev, interface);
+#endif
/* Digital TV */
au0828_dvb_register(dev);
@@ -378,7 +378,11 @@ int au0828_i2c_register(struct au0828_dev *dev)
dev->i2c_adap.algo = &dev->i2c_algo;
dev->i2c_adap.algo_data = dev;
+#ifdef CONFIG_VIDEO_AU0828_V4L2
i2c_set_adapdata(&dev->i2c_adap, &dev->v4l2_dev);
+#else
+ i2c_set_adapdata(&dev->i2c_adap, dev);
+#endif
i2c_add_adapter(&dev->i2c_adap);
dev->i2c_client.adapter = &dev->i2c_adap;
@@ -199,8 +199,10 @@ struct au0828_dev {
struct au0828_dvb dvb;
struct work_struct restart_streaming;
+#ifdef CONFIG_VIDEO_AU0828_V4L2
/* Analog */
struct v4l2_device v4l2_dev;
+#endif
int users;
unsigned int resources; /* resources in use */
struct video_device *vdev;