@@ -91,7 +91,7 @@ top/left corner at position <constant> (0,0) </constant>. The rectangle's
coordinates are expressed in pixels.</para>
<para>The top left corner, width and height of the source rectangle, that is
-the area actually sampled, is given by the <constant> V4L2_SEL_TGT_CROP_ACTIVE
+the area actually sampled, is given by the <constant> V4L2_SEL_TGT_CROP
</constant> target. It uses the same coordinate system as <constant>
V4L2_SEL_TGT_CROP_BOUNDS </constant>. The active cropping area must lie
completely inside the capture boundaries. The driver may further adjust the
@@ -111,7 +111,7 @@ height are equal to the image size set by <constant> VIDIOC_S_FMT </constant>.
</para>
<para>The part of a buffer into which the image is inserted by the hardware is
-controlled by the <constant> V4L2_SEL_TGT_COMPOSE_ACTIVE </constant> target.
+controlled by the <constant> V4L2_SEL_TGT_COMPOSE </constant> target.
The rectangle's coordinates are also expressed in the same coordinate system as
the bounds rectangle. The composing rectangle must lie completely inside bounds
rectangle. The driver must adjust the composing rectangle to fit to the
@@ -125,7 +125,7 @@ bounding rectangle.</para>
<para>The part of a buffer that is modified by the hardware is given by
<constant> V4L2_SEL_TGT_COMPOSE_PADDED </constant>. It contains all pixels
-defined using <constant> V4L2_SEL_TGT_COMPOSE_ACTIVE </constant> plus all
+defined using <constant> V4L2_SEL_TGT_COMPOSE </constant> plus all
padding data modified by hardware during insertion process. All pixels outside
this rectangle <emphasis>must not</emphasis> be changed by the hardware. The
content of pixels that lie inside the padded area but outside active area is
@@ -153,7 +153,7 @@ specified using <constant> VIDIOC_S_FMT </constant> ioctl.</para>
<para>The top left corner, width and height of the source rectangle, that is
the area from which image date are processed by the hardware, is given by the
-<constant> V4L2_SEL_TGT_CROP_ACTIVE </constant>. Its coordinates are expressed
+<constant> V4L2_SEL_TGT_CROP </constant>. Its coordinates are expressed
in in the same coordinate system as the bounds rectangle. The active cropping
area must lie completely inside the crop boundaries and the driver may further
adjust the requested size and/or position according to hardware
@@ -165,7 +165,7 @@ bounding rectangle.</para>
<para>The part of a video signal or graphics display where the image is
inserted by the hardware is controlled by <constant>
-V4L2_SEL_TGT_COMPOSE_ACTIVE </constant> target. The rectangle's coordinates
+V4L2_SEL_TGT_COMPOSE </constant> target. The rectangle's coordinates
are expressed in pixels. The composing rectangle must lie completely inside the
bounds rectangle. The driver must adjust the area to fit to the bounding
limits. Moreover, the driver can perform other adjustments according to
@@ -184,7 +184,7 @@ such a padded area is driver-dependent feature not covered by this document.
Driver developers are encouraged to keep padded rectangle equal to active one.
The padded target is accessed by the <constant> V4L2_SEL_TGT_COMPOSE_PADDED
</constant> identifier. It must contain all pixels from the <constant>
-V4L2_SEL_TGT_COMPOSE_ACTIVE </constant> target.</para>
+V4L2_SEL_TGT_COMPOSE </constant> target.</para>
</section>
@@ -193,8 +193,8 @@ V4L2_SEL_TGT_COMPOSE_ACTIVE </constant> target.</para>
<title>Scaling control</title>
<para>An application can detect if scaling is performed by comparing the width
-and the height of rectangles obtained using <constant> V4L2_SEL_TGT_CROP_ACTIVE
-</constant> and <constant> V4L2_SEL_TGT_COMPOSE_ACTIVE </constant> targets. If
+and the height of rectangles obtained using <constant> V4L2_SEL_TGT_CROP
+</constant> and <constant> V4L2_SEL_TGT_COMPOSE </constant> targets. If
these are not equal then the scaling is applied. The application can compute
the scaling ratios using these values.</para>
@@ -252,7 +252,7 @@ area)</para>
ret = ioctl(fd, &VIDIOC-G-SELECTION;, &sel);
if (ret)
exit(-1);
- sel.target = V4L2_SEL_TGT_CROP_ACTIVE;
+ sel.target = V4L2_SEL_TGT_CROP;
ret = ioctl(fd, &VIDIOC-S-SELECTION;, &sel);
if (ret)
exit(-1);
@@ -281,7 +281,7 @@ area)</para>
r.left = sel.r.width / 4;
r.top = sel.r.height / 4;
sel.r = r;
- sel.target = V4L2_SEL_TGT_COMPOSE_ACTIVE;
+ sel.target = V4L2_SEL_TGT_COMPOSE;
sel.flags = V4L2_SEL_FLAG_LE;
ret = ioctl(fd, &VIDIOC-S-SELECTION;, &sel);
if (ret)
@@ -298,11 +298,11 @@ V4L2_BUF_TYPE_VIDEO_OUTPUT </constant> for other devices</para>
&v4l2-selection; compose = {
.type = V4L2_BUF_TYPE_VIDEO_OUTPUT,
- .target = V4L2_SEL_TGT_COMPOSE_ACTIVE,
+ .target = V4L2_SEL_TGT_COMPOSE,
};
&v4l2-selection; crop = {
.type = V4L2_BUF_TYPE_VIDEO_OUTPUT,
- .target = V4L2_SEL_TGT_CROP_ACTIVE,
+ .target = V4L2_SEL_TGT_CROP,
};
double hscale, vscale;
@@ -65,8 +65,8 @@ Do not use multiplanar buffers. Use <constant> V4L2_BUF_TYPE_VIDEO_CAPTURE
</constant>. Use <constant> V4L2_BUF_TYPE_VIDEO_OUTPUT </constant> instead of
<constant> V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE </constant>. The next step is
setting the value of &v4l2-selection; <structfield>target</structfield> field
-to <constant> V4L2_SEL_TGT_CROP_ACTIVE </constant> (<constant>
-V4L2_SEL_TGT_COMPOSE_ACTIVE </constant>). Please refer to table <xref
+to <constant> V4L2_SEL_TGT_CROP </constant> (<constant>
+V4L2_SEL_TGT_COMPOSE </constant>). Please refer to table <xref
linkend="v4l2-sel-target" /> or <xref linkend="selection-api" /> for additional
targets. The <structfield>flags</structfield> and <structfield>reserved
</structfield> fields of &v4l2-selection; are ignored and they must be filled
@@ -86,8 +86,8 @@ use multiplanar buffers. Use <constant> V4L2_BUF_TYPE_VIDEO_CAPTURE
</constant>. Use <constant> V4L2_BUF_TYPE_VIDEO_OUTPUT </constant> instead of
<constant> V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE </constant>. The next step is
setting the value of &v4l2-selection; <structfield>target</structfield> to
-<constant>V4L2_SEL_TGT_CROP_ACTIVE</constant> (<constant>
-V4L2_SEL_TGT_COMPOSE_ACTIVE </constant>). Please refer to table <xref
+<constant>V4L2_SEL_TGT_CROP</constant> (<constant>
+V4L2_SEL_TGT_COMPOSE </constant>). Please refer to table <xref
linkend="v4l2-sel-target" /> or <xref linkend="selection-api" /> for additional
targets. The &v4l2-rect; <structfield>r</structfield> rectangle need to be
set to the desired active area. Field &v4l2-selection; <structfield> reserved
@@ -161,7 +161,7 @@ exist no rectangle </emphasis> that satisfies the constraints.</para>
&cs-def;
<tbody valign="top">
<row>
- <entry><constant>V4L2_SEL_TGT_CROP_ACTIVE</constant></entry>
+ <entry><constant>V4L2_SEL_TGT_CROP</constant></entry>
<entry>0x0000</entry>
<entry>The area that is currently cropped by hardware.</entry>
</row>
@@ -176,7 +176,7 @@ exist no rectangle </emphasis> that satisfies the constraints.</para>
<entry>Limits for the cropping rectangle.</entry>
</row>
<row>
- <entry><constant>V4L2_SEL_TGT_COMPOSE_ACTIVE</constant></entry>
+ <entry><constant>V4L2_SEL_TGT_COMPOSE</constant></entry>
<entry>0x0100</entry>
<entry>The area to which data is composed by hardware.</entry>
</row>
@@ -193,7 +193,8 @@ exist no rectangle </emphasis> that satisfies the constraints.</para>
<row>
<entry><constant>V4L2_SEL_TGT_COMPOSE_PADDED</constant></entry>
<entry>0x0103</entry>
- <entry>The active area and all padding pixels that are inserted or modified by hardware.</entry>
+ <entry>The active area and all padding pixels that are inserted or
+ modified by hardware.</entry>
</row>
</tbody>
</tgroup>
@@ -655,7 +655,7 @@ static void fimc_capture_try_selection(struct fimc_ctx *ctx,
r->left = r->top = 0;
return;
}
- if (target == V4L2_SEL_TGT_COMPOSE_ACTIVE) {
+ if (target == V4L2_SEL_TGT_COMPOSE) {
if (ctx->rotation != 90 && ctx->rotation != 270)
align_h = 1;
max_sc_h = min(SCALER_MAX_HRATIO, 1 << (ffs(sink->width) - 3));
@@ -682,7 +682,7 @@ static void fimc_capture_try_selection(struct fimc_ctx *ctx,
rotate ? sink->f_height : sink->f_width);
max_h = min_t(u32, FIMC_CAMIF_MAX_HEIGHT, sink->f_height);
- if (target == V4L2_SEL_TGT_COMPOSE_ACTIVE) {
+ if (target == V4L2_SEL_TGT_COMPOSE) {
min_w = min_t(u32, max_w, sink->f_width / max_sc_h);
min_h = min_t(u32, max_h, sink->f_height / max_sc_v);
if (rotate) {
@@ -1147,9 +1147,9 @@ static int fimc_cap_g_selection(struct file *file, void *fh,
s->r.height = f->o_height;
return 0;
- case V4L2_SEL_TGT_COMPOSE_ACTIVE:
+ case V4L2_SEL_TGT_COMPOSE:
f = &ctx->d_frame;
- case V4L2_SEL_TGT_CROP_ACTIVE:
+ case V4L2_SEL_TGT_CROP:
s->r.left = f->offs_h;
s->r.top = f->offs_v;
s->r.width = f->width;
@@ -1185,9 +1185,9 @@ static int fimc_cap_s_selection(struct file *file, void *fh,
if (s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE)
return -EINVAL;
- if (s->target == V4L2_SEL_TGT_COMPOSE_ACTIVE)
+ if (s->target == V4L2_SEL_TGT_COMPOSE)
f = &ctx->d_frame;
- else if (s->target == V4L2_SEL_TGT_CROP_ACTIVE)
+ else if (s->target == V4L2_SEL_TGT_CROP)
f = &ctx->s_frame;
else
return -EINVAL;
@@ -1483,7 +1483,7 @@ static int fimc_subdev_set_selection(struct v4l2_subdev *sd,
return -EINVAL;
mutex_lock(&fimc->lock);
- fimc_capture_try_selection(ctx, r, V4L2_SEL_TGT_CROP_ACTIVE);
+ fimc_capture_try_selection(ctx, r, V4L2_SEL_TGT_CROP);
switch (sel->target) {
case V4L2_SUBDEV_SEL_TGT_COMPOSE_BOUNDS:
@@ -871,7 +871,7 @@ static int fimc_lite_g_selection(struct file *file, void *fh,
sel->r.height = f->f_height;
return 0;
- case V4L2_SEL_TGT_COMPOSE_ACTIVE:
+ case V4L2_SEL_TGT_COMPOSE:
sel->r = f->rect;
return 0;
}
@@ -888,7 +888,7 @@ static int fimc_lite_s_selection(struct file *file, void *fh,
unsigned long flags;
if (sel->type != V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE ||
- sel->target != V4L2_SEL_TGT_COMPOSE_ACTIVE)
+ sel->target != V4L2_SEL_TGT_COMPOSE)
return -EINVAL;
fimc_lite_try_compose(fimc, &rect);
@@ -824,10 +824,10 @@ static int s5p_jpeg_g_selection(struct file *file, void *priv,
/* For JPEG blob active == default == bounds */
switch (s->target) {
- case V4L2_SEL_TGT_CROP_ACTIVE:
+ case V4L2_SEL_TGT_CROP:
case V4L2_SEL_TGT_CROP_BOUNDS:
case V4L2_SEL_TGT_CROP_DEFAULT:
- case V4L2_SEL_TGT_COMPOSE_ACTIVE:
+ case V4L2_SEL_TGT_COMPOSE:
case V4L2_SEL_TGT_COMPOSE_DEFAULT:
s->r.width = ctx->out_q.w;
s->r.height = ctx->out_q.h;
@@ -367,7 +367,7 @@ static int mxr_g_selection(struct file *file, void *fh,
return -EINVAL;
switch (s->target) {
- case V4L2_SEL_TGT_CROP_ACTIVE:
+ case V4L2_SEL_TGT_CROP:
s->r.left = geo->src.x_offset;
s->r.top = geo->src.y_offset;
s->r.width = geo->src.width;
@@ -380,7 +380,7 @@ static int mxr_g_selection(struct file *file, void *fh,
s->r.width = geo->src.full_width;
s->r.height = geo->src.full_height;
break;
- case V4L2_SEL_TGT_COMPOSE_ACTIVE:
+ case V4L2_SEL_TGT_COMPOSE:
case V4L2_SEL_TGT_COMPOSE_PADDED:
s->r.left = geo->dst.x_offset;
s->r.top = geo->dst.y_offset;
@@ -449,11 +449,11 @@ static int mxr_s_selection(struct file *file, void *fh,
res.height = geo->dst.full_height;
break;
- case V4L2_SEL_TGT_CROP_ACTIVE:
+ case V4L2_SEL_TGT_CROP:
target = &geo->src;
stage = MXR_GEOMETRY_CROP;
break;
- case V4L2_SEL_TGT_COMPOSE_ACTIVE:
+ case V4L2_SEL_TGT_COMPOSE:
case V4L2_SEL_TGT_COMPOSE_PADDED:
target = &geo->dst;
stage = MXR_GEOMETRY_COMPOSE;
@@ -1486,9 +1486,9 @@ static long __video_do_ioctl(struct file *file,
/* crop means compose for output devices */
if (V4L2_TYPE_IS_OUTPUT(p->type))
- s.target = V4L2_SEL_TGT_COMPOSE_ACTIVE;
+ s.target = V4L2_SEL_TGT_COMPOSE;
else
- s.target = V4L2_SEL_TGT_CROP_ACTIVE;
+ s.target = V4L2_SEL_TGT_CROP;
ret = ops->vidioc_g_selection(file, fh, &s);
@@ -1519,9 +1519,9 @@ static long __video_do_ioctl(struct file *file,
/* crop means compose for output devices */
if (V4L2_TYPE_IS_OUTPUT(p->type))
- s.target = V4L2_SEL_TGT_COMPOSE_ACTIVE;
+ s.target = V4L2_SEL_TGT_COMPOSE;
else
- s.target = V4L2_SEL_TGT_CROP_ACTIVE;
+ s.target = V4L2_SEL_TGT_CROP;
ret = ops->vidioc_s_selection(file, fh, &s);
}
@@ -768,13 +768,13 @@ struct v4l2_crop {
/* Selection targets */
/* Current cropping area */
-#define V4L2_SEL_TGT_CROP_ACTIVE 0x0000
+#define V4L2_SEL_TGT_CROP 0x0000
/* Default cropping area */
#define V4L2_SEL_TGT_CROP_DEFAULT 0x0001
/* Cropping bounds */
#define V4L2_SEL_TGT_CROP_BOUNDS 0x0002
/* Current composing area */
-#define V4L2_SEL_TGT_COMPOSE_ACTIVE 0x0100
+#define V4L2_SEL_TGT_COMPOSE 0x0100
/* Default composing area */
#define V4L2_SEL_TGT_COMPOSE_DEFAULT 0x0101
/* Composing bounds */
@@ -782,6 +782,10 @@ struct v4l2_crop {
/* Current composing area plus all padding pixels */
#define V4L2_SEL_TGT_COMPOSE_PADDED 0x0103
+/* Backward compatibility definitions */
+#define V4L2_SEL_TGT_CROP_ACTIVE V4L2_SEL_TGT_CROP
+#define V4L2_SEL_TGT_COMPOSE_ACTIVE V4L2_SEL_TGT_COMPOSE
+
/**
* struct v4l2_selection - selection info
* @type: buffer type (do not use *_MPLANE types)