[v2,04/18] ASoC: dt-bindings: mt6357: Add audio codec document
Commit Message
Add MT8365 audio codec bindings to set required
and optional voltage properties between the codec and the board.
The properties are:
- phandle of the requiered power supply.
- Setup of microphone bias voltage.
- Setup of the speaker pin pull-down.
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
---
.../devicetree/bindings/sound/mt6357.yaml | 54 ++++++++++++++++++++++
1 file changed, 54 insertions(+)
Comments
On Tue, 09 Apr 2024 12:13:25 +0200, Alexandre Mergnat wrote:
> Add MT8365 audio codec bindings to set required
> and optional voltage properties between the codec and the board.
> The properties are:
> - phandle of the requiered power supply.
> - Setup of microphone bias voltage.
> - Setup of the speaker pin pull-down.
>
> Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
> ---
> .../devicetree/bindings/sound/mt6357.yaml | 54 ++++++++++++++++++++++
> 1 file changed, 54 insertions(+)
>
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/sound/mt6357.yaml: properties:vaud28-supply: '$ref' is not one of ['description', 'deprecated']
from schema $id: http://devicetree.org/meta-schemas/core.yaml#
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240226-audio-i350-v2-4-3043d483de0d@baylibre.com
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
new file mode 100644
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/mt6357.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT6357 Codec
+
+maintainers:
+ - Alexandre Mergnat <amergnat@baylibre.com>
+
+description: |
+ This is the required and optional voltage properties for this subdevice.
+ The communication between MT6357 and SoC is through Mediatek PMIC wrapper.
+ For more detail, please visit Mediatek PMIC wrapper documentation.
+ Must be a child node of PMIC wrapper.
+
+properties:
+ vaud28-supply:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: 2.8 volt supply for the audio codec
+
+ mediatek,hp-pull-down:
+ description:
+ Earphone driver positive output stage short to
+ the audio reference ground.
+ type: boolean
+
+ mediatek,micbias0-microvolt:
+ description: Selects MIC Bias 0 output voltage.
+ enum: [1700000, 1800000, 1900000, 2000000,
+ 2100000, 2500000, 2600000, 2700000]
+ default: 1700000
+
+ mediatek,micbias1-microvolt:
+ description: Selects MIC Bias 1 output voltage.
+ enum: [1700000, 1800000, 1900000, 2000000,
+ 2100000, 2500000, 2600000, 2700000]
+ default: 1700000
+
+required:
+ - vaud28-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ codec {
+ vaud28-supply = <&mt6357_vaud28_reg>;
+ mediatek,micbias0-microvolt = <1900000>;
+ mediatek,micbias1-microvolt = <1700000>;
+ };
+
+...