| Message ID | 20231129093113.255161-2-paul.elder@ideasonboard.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers |
Received: from sv.mirrors.kernel.org ([139.178.88.99]) by www.linuxtv.org with esmtps (TLS1.3:ECDHE_RSA_AES_256_GCM_SHA384:256) (Exim 4.92) (envelope-from <linux-media+bounces-1339-patchwork=linuxtv.org@vger.kernel.org>) id 1r8GvK-004Pt6-1w for patchwork@linuxtv.org; Wed, 29 Nov 2023 09:32:04 +0000 Received: from smtp.subspace.kernel.org (wormhole.subspace.kernel.org [52.25.139.140]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by sv.mirrors.kernel.org (Postfix) with ESMTPS id 8E15F282E77 for <patchwork@linuxtv.org>; Wed, 29 Nov 2023 09:31:49 +0000 (UTC) Received: from localhost.localdomain (localhost.localdomain [127.0.0.1]) by smtp.subspace.kernel.org (Postfix) with ESMTP id D22EB15AE8; Wed, 29 Nov 2023 09:31:47 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; dkim=pass (1024-bit key) header.d=ideasonboard.com header.i=@ideasonboard.com header.b="H+GaGd/M" X-Original-To: linux-media@vger.kernel.org Received: from perceval.ideasonboard.com (perceval.ideasonboard.com [IPv6:2001:4b98:dc2:55:216:3eff:fef7:d647]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 1B972213F; Wed, 29 Nov 2023 01:31:43 -0800 (PST) Received: from pyrite.hamster-moth.ts.net (h175-177-049-135.catv02.itscom.jp [175.177.49.135]) by perceval.ideasonboard.com (Postfix) with ESMTPSA id 736FA2B6; Wed, 29 Nov 2023 10:30:58 +0100 (CET) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=ideasonboard.com; s=mail; t=1701250265; bh=Ivci0RIdZox1QiCzMM0eBouiiFmKKEtb5YIkQNAQ3HY=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=H+GaGd/Mvd577CKM47ZqEdGDKy7TtRBM1fO5smyYn1ulrdAlXRM531mw/N7Gtc6pO z5eq3XiCNsg/DCUIox2IIOncFaiDOOiEQyxZB3EIWMTRbct/whRTJSDTJmb0QTsGg6 V1c1Q5R+yo8ALwsM413vSDzzchnsk0di9AiaKJeI= From: Paul Elder <paul.elder@ideasonboard.com> To: linux-media@vger.kernel.org, devicetree@vger.kernel.org Cc: kieran.bingham@ideasonboard.com, tomi.valkeinen@ideasonboard.com, umang.jain@ideasonboard.com, Paul Elder <paul.elder@ideasonboard.com>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Conor Dooley <conor+dt@kernel.org>, Shawn Guo <shawnguo@kernel.org>, Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix Kernel Team <kernel@pengutronix.de>, Fabio Estevam <festevam@gmail.com>, NXP Linux Team <linux-imx@nxp.com>, Marek Vasut <marex@denx.de>, Alexander Stein <alexander.stein@ew.tq-group.com>, Lucas Stach <l.stach@pengutronix.de>, Adam Ford <aford173@gmail.com>, Laurent Pinchart <laurent.pinchart@ideasonboard.com>, Frank Li <Frank.Li@nxp.com>, linux-arm-kernel@lists.infradead.org (moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE), linux-kernel@vger.kernel.org (open list) Subject: [PATCH 1/2] arm64: dts: imx8mp: Add DT nodes for the two ISPs Date: Wed, 29 Nov 2023 18:31:12 +0900 Message-Id: <20231129093113.255161-2-paul.elder@ideasonboard.com> X-Mailer: git-send-email 2.39.2 In-Reply-To: <20231129093113.255161-1-paul.elder@ideasonboard.com> References: <20231129093113.255161-1-paul.elder@ideasonboard.com> Precedence: bulk X-Mailing-List: linux-media@vger.kernel.org List-Id: <linux-media.vger.kernel.org> List-Subscribe: <mailto:linux-media+subscribe@vger.kernel.org> List-Unsubscribe: <mailto:linux-media+unsubscribe@vger.kernel.org> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-LSpam-Score: -4.8 (----) X-LSpam-Report: No, score=-4.8 required=5.0 tests=BAYES_00=-1.9,DKIM_SIGNED=0.1,DKIM_VALID=-0.1,DKIM_VALID_AU=-0.1,HEADER_FROM_DIFFERENT_DOMAINS=0.5,MAILING_LIST_MULTI=-1,RCVD_IN_DNSWL_MED=-2.3 autolearn=unavailable autolearn_force=no |
| Series |
arm64: dts: imx8mp: Add support for the ISPs
|
|
Commit Message
Paul Elder
Nov. 29, 2023, 9:31 a.m. UTC
The ISP supports both CSI and parallel interfaces, where port 0
corresponds to the former and port 1 corresponds to the latter. Since
the i.MX8MP's ISPs are connected by the parallel interface to the CSI
receiver, set them both to port 1.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
---
arch/arm64/boot/dts/freescale/imx8mp.dtsi | 50 +++++++++++++++++++++++
1 file changed, 50 insertions(+)
Comments
Hi Paul, Am Mittwoch, 29. November 2023, 10:31:12 CET schrieb Paul Elder: > The ISP supports both CSI and parallel interfaces, where port 0 > corresponds to the former and port 1 corresponds to the latter. Since > the i.MX8MP's ISPs are connected by the parallel interface to the CSI > receiver, set them both to port 1. > > Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Thanks for the patch. I'm running with for a while now. Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> > --- > arch/arm64/boot/dts/freescale/imx8mp.dtsi | 50 +++++++++++++++++++++++ > 1 file changed, 50 insertions(+) > > diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi > b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index > c9a610ba4836..25579d4c58f2 100644 > --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi > +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi > @@ -1604,6 +1604,56 @@ isi_in_1: endpoint { > }; > }; > > + isp_0: isp@32e10000 { > + compatible = "fsl,imx8mp-isp"; > + reg = <0x32e10000 0x10000>; > + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>, > + <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>, > + <&clk IMX8MP_CLK_MEDIA_APB_ROOT>; > + clock-names = "isp", "aclk", "hclk"; > + assigned-clocks = <&clk IMX8MP_CLK_MEDIA_ISP>; > + assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>; > + assigned-clock-rates = <500000000>; > + power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_ISP>; > + fsl,blk-ctrl = <&media_blk_ctrl 0>; > + status = "disabled"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@1 { > + reg = <1>; > + }; > + }; > + }; > + > + isp_1: isp@32e20000 { > + compatible = "fsl,imx8mp-isp"; > + reg = <0x32e20000 0x10000>; > + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>, > + <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>, > + <&clk IMX8MP_CLK_MEDIA_APB_ROOT>; > + clock-names = "isp", "aclk", "hclk"; > + assigned-clocks = <&clk IMX8MP_CLK_MEDIA_ISP>; > + assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>; > + assigned-clock-rates = <500000000>; > + power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_ISP>; > + fsl,blk-ctrl = <&media_blk_ctrl 1>; > + status = "disabled"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@1 { > + reg = <1>; > + }; > + }; > + }; > + > dewarp: dwe@32e30000 { > compatible = "nxp,imx8mp-dw100"; > reg = <0x32e30000 0x10000>;
Hi Paul, On Wed, Nov 29, 2023 at 6:31 AM Paul Elder <paul.elder@ideasonboard.com> wrote: > + isp_0: isp@32e10000 { > + compatible = "fsl,imx8mp-isp"; This compatible string is still not present in today's linux-next. Will it be merged soon?
On Wed, Nov 29, 2023 at 5:59 AM Fabio Estevam <festevam@gmail.com> wrote: > > Hi Paul, > > On Wed, Nov 29, 2023 at 6:31 AM Paul Elder <paul.elder@ideasonboard.com> wrote: > > > + isp_0: isp@32e10000 { > > + compatible = "fsl,imx8mp-isp"; > > This compatible string is still not present in today's linux-next. > > Will it be merged soon? Fabio, Paul posted a series to the media mailing list adding support for the i.MX8MP ISP: https://patchwork.linuxtv.org/project/linux-media/list/?series=11776 I am guessing it'll have to go through the review process. I was CC'd because I did some previous testing before. I have a Sony imx219 that works in 4-lane mode. I'm likely to review and test tonight or tomorrow. I am guessing he posted the DTS changes via a different series since they usually go through Shawn's branch instead of the media one. Hopefully that helps. adam
Hi Adam, On Wed, Nov 29, 2023 at 10:49 AM Adam Ford <aford173@gmail.com> wrote: > Fabio, > > Paul posted a series to the media mailing list adding support for the > i.MX8MP ISP: > > https://patchwork.linuxtv.org/project/linux-media/list/?series=11776 Thanks for the clarification. It's great to see this series. Cheers
On Wed, Nov 29, 2023 at 07:49:31AM -0600, Adam Ford wrote: > On Wed, Nov 29, 2023 at 5:59 AM Fabio Estevam <festevam@gmail.com> wrote: > > > > Hi Paul, > > > > On Wed, Nov 29, 2023 at 6:31 AM Paul Elder <paul.elder@ideasonboard.com> wrote: > > > > > + isp_0: isp@32e10000 { > > > + compatible = "fsl,imx8mp-isp"; > > > > This compatible string is still not present in today's linux-next. > > > > Will it be merged soon? > > Fabio, > > Paul posted a series to the media mailing list adding support for the > i.MX8MP ISP: > > https://patchwork.linuxtv.org/project/linux-media/list/?series=11776 Paul, this is the kind of information that needs to go to the cover letter, along with anything else that reviewers may need to review the patches. Otherwise, as Fabio pointed out, it gets confusing. Please expand the cover letter for the next iterations of the series. > I am guessing it'll have to go through the review process. I was CC'd > because I did some previous testing before. I have a Sony imx219 that > works in 4-lane mode. I'm likely to review and test tonight or > tomorrow. I am guessing he posted the DTS changes via a different > series since they usually go through Shawn's branch instead of the > media one. > > Hopefully that helps.
On Wed, Nov 29, 2023 at 3:31 AM Paul Elder <paul.elder@ideasonboard.com> wrote: > > The ISP supports both CSI and parallel interfaces, where port 0 > corresponds to the former and port 1 corresponds to the latter. Since > the i.MX8MP's ISPs are connected by the parallel interface to the CSI > receiver, set them both to port 1. > > Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Paul, are you able to resend this now that the driver part has been merged into the main branch? If you can't, I can resend it on your behalf. thanks, adam > --- > arch/arm64/boot/dts/freescale/imx8mp.dtsi | 50 +++++++++++++++++++++++ > 1 file changed, 50 insertions(+) > > diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi > index c9a610ba4836..25579d4c58f2 100644 > --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi > +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi > @@ -1604,6 +1604,56 @@ isi_in_1: endpoint { > }; > }; > > + isp_0: isp@32e10000 { > + compatible = "fsl,imx8mp-isp"; > + reg = <0x32e10000 0x10000>; > + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>, > + <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>, > + <&clk IMX8MP_CLK_MEDIA_APB_ROOT>; > + clock-names = "isp", "aclk", "hclk"; > + assigned-clocks = <&clk IMX8MP_CLK_MEDIA_ISP>; > + assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>; > + assigned-clock-rates = <500000000>; > + power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_ISP>; > + fsl,blk-ctrl = <&media_blk_ctrl 0>; > + status = "disabled"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@1 { > + reg = <1>; > + }; > + }; > + }; > + > + isp_1: isp@32e20000 { > + compatible = "fsl,imx8mp-isp"; > + reg = <0x32e20000 0x10000>; > + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>, > + <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>, > + <&clk IMX8MP_CLK_MEDIA_APB_ROOT>; > + clock-names = "isp", "aclk", "hclk"; > + assigned-clocks = <&clk IMX8MP_CLK_MEDIA_ISP>; > + assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>; > + assigned-clock-rates = <500000000>; > + power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_ISP>; > + fsl,blk-ctrl = <&media_blk_ctrl 1>; > + status = "disabled"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@1 { > + reg = <1>; > + }; > + }; > + }; > + > dewarp: dwe@32e30000 { > compatible = "nxp,imx8mp-dw100"; > reg = <0x32e30000 0x10000>; > -- > 2.39.2 >
Hi Adam, On Wed, Mar 20, 2024 at 07:35:46AM -0500, Adam Ford wrote: > On Wed, Nov 29, 2023 at 3:31 AM Paul Elder wrote: > > > > The ISP supports both CSI and parallel interfaces, where port 0 > > corresponds to the former and port 1 corresponds to the latter. Since > > the i.MX8MP's ISPs are connected by the parallel interface to the CSI > > receiver, set them both to port 1. > > > > Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> > > Paul, are you able to resend this now that the driver part has been > merged into the main branch? > > If you can't, I can resend it on your behalf. I've just sent a v2, you're on CC. > > --- > > arch/arm64/boot/dts/freescale/imx8mp.dtsi | 50 +++++++++++++++++++++++ > > 1 file changed, 50 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi > > index c9a610ba4836..25579d4c58f2 100644 > > --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi > > +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi > > @@ -1604,6 +1604,56 @@ isi_in_1: endpoint { > > }; > > }; > > > > + isp_0: isp@32e10000 { > > + compatible = "fsl,imx8mp-isp"; > > + reg = <0x32e10000 0x10000>; > > + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; > > + clocks = <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>, > > + <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>, > > + <&clk IMX8MP_CLK_MEDIA_APB_ROOT>; > > + clock-names = "isp", "aclk", "hclk"; > > + assigned-clocks = <&clk IMX8MP_CLK_MEDIA_ISP>; > > + assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>; > > + assigned-clock-rates = <500000000>; > > + power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_ISP>; > > + fsl,blk-ctrl = <&media_blk_ctrl 0>; > > + status = "disabled"; > > + > > + ports { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + port@1 { > > + reg = <1>; > > + }; > > + }; > > + }; > > + > > + isp_1: isp@32e20000 { > > + compatible = "fsl,imx8mp-isp"; > > + reg = <0x32e20000 0x10000>; > > + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; > > + clocks = <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>, > > + <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>, > > + <&clk IMX8MP_CLK_MEDIA_APB_ROOT>; > > + clock-names = "isp", "aclk", "hclk"; > > + assigned-clocks = <&clk IMX8MP_CLK_MEDIA_ISP>; > > + assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>; > > + assigned-clock-rates = <500000000>; > > + power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_ISP>; > > + fsl,blk-ctrl = <&media_blk_ctrl 1>; > > + status = "disabled"; > > + > > + ports { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + port@1 { > > + reg = <1>; > > + }; > > + }; > > + }; > > + > > dewarp: dwe@32e30000 { > > compatible = "nxp,imx8mp-dw100"; > > reg = <0x32e30000 0x10000>;
On Mon, Mar 25, 2024 at 10:14 AM Laurent Pinchart <laurent.pinchart@ideasonboard.com> wrote: > > Hi Adam, > > On Wed, Mar 20, 2024 at 07:35:46AM -0500, Adam Ford wrote: > > On Wed, Nov 29, 2023 at 3:31 AM Paul Elder wrote: > > > > > > The ISP supports both CSI and parallel interfaces, where port 0 > > > corresponds to the former and port 1 corresponds to the latter. Since > > > the i.MX8MP's ISPs are connected by the parallel interface to the CSI > > > receiver, set them both to port 1. > > > > > > Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> > > > > Paul, are you able to resend this now that the driver part has been > > merged into the main branch? > > > > If you can't, I can resend it on your behalf. > > I've just sent a v2, you're on CC. Thanks! adam > > > > --- > > > arch/arm64/boot/dts/freescale/imx8mp.dtsi | 50 +++++++++++++++++++++++ > > > 1 file changed, 50 insertions(+) > > > > > > diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi > > > index c9a610ba4836..25579d4c58f2 100644 > > > --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi > > > +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi > > > @@ -1604,6 +1604,56 @@ isi_in_1: endpoint { > > > }; > > > }; > > > > > > + isp_0: isp@32e10000 { > > > + compatible = "fsl,imx8mp-isp"; > > > + reg = <0x32e10000 0x10000>; > > > + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; > > > + clocks = <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>, > > > + <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>, > > > + <&clk IMX8MP_CLK_MEDIA_APB_ROOT>; > > > + clock-names = "isp", "aclk", "hclk"; > > > + assigned-clocks = <&clk IMX8MP_CLK_MEDIA_ISP>; > > > + assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>; > > > + assigned-clock-rates = <500000000>; > > > + power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_ISP>; > > > + fsl,blk-ctrl = <&media_blk_ctrl 0>; > > > + status = "disabled"; > > > + > > > + ports { > > > + #address-cells = <1>; > > > + #size-cells = <0>; > > > + > > > + port@1 { > > > + reg = <1>; > > > + }; > > > + }; > > > + }; > > > + > > > + isp_1: isp@32e20000 { > > > + compatible = "fsl,imx8mp-isp"; > > > + reg = <0x32e20000 0x10000>; > > > + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; > > > + clocks = <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>, > > > + <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>, > > > + <&clk IMX8MP_CLK_MEDIA_APB_ROOT>; > > > + clock-names = "isp", "aclk", "hclk"; > > > + assigned-clocks = <&clk IMX8MP_CLK_MEDIA_ISP>; > > > + assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>; > > > + assigned-clock-rates = <500000000>; > > > + power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_ISP>; > > > + fsl,blk-ctrl = <&media_blk_ctrl 1>; > > > + status = "disabled"; > > > + > > > + ports { > > > + #address-cells = <1>; > > > + #size-cells = <0>; > > > + > > > + port@1 { > > > + reg = <1>; > > > + }; > > > + }; > > > + }; > > > + > > > dewarp: dwe@32e30000 { > > > compatible = "nxp,imx8mp-dw100"; > > > reg = <0x32e30000 0x10000>; > > -- > Regards, > > Laurent Pinchart
diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index c9a610ba4836..25579d4c58f2 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi @@ -1604,6 +1604,56 @@ isi_in_1: endpoint { }; }; + isp_0: isp@32e10000 { + compatible = "fsl,imx8mp-isp"; + reg = <0x32e10000 0x10000>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>, + <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>, + <&clk IMX8MP_CLK_MEDIA_APB_ROOT>; + clock-names = "isp", "aclk", "hclk"; + assigned-clocks = <&clk IMX8MP_CLK_MEDIA_ISP>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>; + assigned-clock-rates = <500000000>; + power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_ISP>; + fsl,blk-ctrl = <&media_blk_ctrl 0>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + }; + }; + }; + + isp_1: isp@32e20000 { + compatible = "fsl,imx8mp-isp"; + reg = <0x32e20000 0x10000>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>, + <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>, + <&clk IMX8MP_CLK_MEDIA_APB_ROOT>; + clock-names = "isp", "aclk", "hclk"; + assigned-clocks = <&clk IMX8MP_CLK_MEDIA_ISP>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>; + assigned-clock-rates = <500000000>; + power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_ISP>; + fsl,blk-ctrl = <&media_blk_ctrl 1>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + }; + }; + }; + dewarp: dwe@32e30000 { compatible = "nxp,imx8mp-dw100"; reg = <0x32e30000 0x10000>;