Message ID | 20230626032735.49500-3-guoniu.zhou@oss.nxp.com (mailing list archive) |
---|---|
State | Superseded |
Headers |
Received: from vger.kernel.org ([23.128.96.18]) by www.linuxtv.org with esmtp (Exim 4.92) (envelope-from <linux-media-owner@vger.kernel.org>) id 1qDcon-0084om-M9; Mon, 26 Jun 2023 03:23:10 +0000 Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229907AbjFZDXI (ORCPT <rfc822;mkrufky@linuxtv.org> + 1 other); Sun, 25 Jun 2023 23:23:08 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:55622 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S230185AbjFZDXF (ORCPT <rfc822;linux-media@vger.kernel.org>); Sun, 25 Jun 2023 23:23:05 -0400 Received: from EUR04-VI1-obe.outbound.protection.outlook.com (mail-vi1eur04on2049.outbound.protection.outlook.com [40.107.8.49]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 4D8C111C; Sun, 25 Jun 2023 20:23:03 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; s=arcselector9901; d=microsoft.com; cv=none; b=SvgqhveWgxVhRbqAKbg0mwSmKXzc1RAbtNSEXm78ipCDHJLHurjYB5jxmmCvXLk/46VgAIohMwlR8Tz14D66Hzo0+I4VttidQRVdmG+k+KeugI8js1FRE4yg29f/El366STC2zIiA9jj3MWv5kW9IaLanVSjHBjF3+exAuR5c65IL6hTcqMz8lQUujCDdSSs31q8Dp+fbgMy/yZ4IbXZZSIworRV2IT8vf6I3VCiOsJpaVV+f1P6mSs9PseF65Ky096GYGbrVJ0Z4oE0vFkb7GXnhHiNsyrxmo0LhhezKNqfzK9EXZyMVpJvHqByme/A0FFoqjU6Hby6ZWVsFD/NOQ== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector9901; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-AntiSpam-MessageData-ChunkCount:X-MS-Exchange-AntiSpam-MessageData-0:X-MS-Exchange-AntiSpam-MessageData-1; bh=micHhjmDC75HB8PMRqUMgXVdZH1/EEGAlGh0nOM5jHE=; b=FapT020St3pIokdz/drME5ehH3SQbika83sMlI6QQSkfXHTKdLzS6XLMnipZVU4cnTuTAMvcuuIbybsWT0Z+ijwDs73WLKYv1fhyFLYDhlv2Ajro63zGUQ42DguS7Un4IDU2bX2Z9/iYf+3djfeC77jAOma3oUma2kMsEVzMGhY1SoNPxxVhvSehVvo2i9RK8IrfFbkoHwPbDLAAm/tQ3odNpGh6hRO7b+rz4EM2rggyw0vvu8PFnozXvFdNYlLt0eQqQaWmdSgdtrtR3Jyo3B+4CL2BeNAHnhTIdFQZ5K+Hf8tUyYE+uJJwTXRTtnjjk1Wb+2nU/plrGFJN1flKWg== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=pass smtp.mailfrom=oss.nxp.com; dmarc=pass action=none header.from=oss.nxp.com; dkim=pass header.d=oss.nxp.com; arc=none DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=NXP1.onmicrosoft.com; s=selector2-NXP1-onmicrosoft-com; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=micHhjmDC75HB8PMRqUMgXVdZH1/EEGAlGh0nOM5jHE=; b=NnxlKg0B0Z+nmuVFxPhHVZ9Ax0TRS5MbLWPUNdcPQL82sRX7XGPsF2+dnaZmzpcGdhPePyruxk2Mge43NEG/4/SXAJgWaSeTEy1yBd/h4IOOf/SFGTkTF84qBc/DE9FuS3rV86Ao4/QA02Gm+XfJUFr6Q0A6vqCgeZ6/tWETfgU= Authentication-Results: dkim=none (message not signed) header.d=none;dmarc=none action=none header.from=oss.nxp.com; Received: from AS8PR04MB9080.eurprd04.prod.outlook.com (2603:10a6:20b:447::16) by DBBPR04MB7658.eurprd04.prod.outlook.com (2603:10a6:10:20d::24) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.6521.26; Mon, 26 Jun 2023 03:22:59 +0000 Received: from AS8PR04MB9080.eurprd04.prod.outlook.com ([fe80::1a0c:99b1:603a:e219]) by AS8PR04MB9080.eurprd04.prod.outlook.com ([fe80::1a0c:99b1:603a:e219%3]) with mapi id 15.20.6521.023; Mon, 26 Jun 2023 03:22:58 +0000 From: guoniu.zhou@oss.nxp.com To: linux-media@vger.kernel.org, linux-imx@nxp.com, devicetree@vger.kernel.org Cc: laurent.pinchart@ideasonboard.com, mchehab@kernel.org, robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org, xavier.roumegue@oss.nxp.com, kernel@pengutronix.de, jacopo.mondi@ideasonboard.com, sakari.ailus@linux.intel.com Subject: [PATCH v2 2/2] media: nxp: imx-isi: add ISI support for i.MX93 Date: Mon, 26 Jun 2023 11:27:35 +0800 Message-Id: <20230626032735.49500-3-guoniu.zhou@oss.nxp.com> X-Mailer: git-send-email 2.37.1 In-Reply-To: <20230626032735.49500-1-guoniu.zhou@oss.nxp.com> References: <20230626032735.49500-1-guoniu.zhou@oss.nxp.com> Content-Transfer-Encoding: 8bit Content-Type: text/plain X-ClientProxiedBy: SG2PR02CA0124.apcprd02.prod.outlook.com (2603:1096:4:188::9) To AS8PR04MB9080.eurprd04.prod.outlook.com (2603:10a6:20b:447::16) MIME-Version: 1.0 X-MS-Exchange-MessageSentRepresentingType: 1 X-MS-PublicTrafficType: Email X-MS-TrafficTypeDiagnostic: AS8PR04MB9080:EE_|DBBPR04MB7658:EE_ X-MS-Office365-Filtering-Correlation-Id: 103e4a18-d9a7-4271-590d-08db75f4a3e8 X-MS-Exchange-SharedMailbox-RoutingAgent-Processed: True X-MS-Exchange-SenderADCheck: 1 X-MS-Exchange-AntiSpam-Relay: 0 X-Microsoft-Antispam: BCL:0; X-Microsoft-Antispam-Message-Info: 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 X-Forefront-Antispam-Report: CIP:255.255.255.255;CTRY:;LANG:en;SCL:1;SRV:;IPV:NLI;SFV:NSPM;H:AS8PR04MB9080.eurprd04.prod.outlook.com;PTR:;CAT:NONE;SFS:(13230028)(4636009)(396003)(366004)(39860400002)(136003)(376002)(346002)(451199021)(7416002)(5660300002)(66556008)(4326008)(66476007)(66946007)(478600001)(316002)(8676002)(8936002)(6506007)(2906002)(86362001)(41300700001)(6486002)(52116002)(186003)(9686003)(6512007)(1076003)(26005)(38350700002)(38100700002)(6666004)(83380400001)(2616005);DIR:OUT;SFP:1101; X-MS-Exchange-AntiSpam-MessageData-ChunkCount: 1 X-MS-Exchange-AntiSpam-MessageData-0: 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 X-OriginatorOrg: oss.nxp.com X-MS-Exchange-CrossTenant-Network-Message-Id: 103e4a18-d9a7-4271-590d-08db75f4a3e8 X-MS-Exchange-CrossTenant-AuthSource: AS8PR04MB9080.eurprd04.prod.outlook.com X-MS-Exchange-CrossTenant-AuthAs: Internal X-MS-Exchange-CrossTenant-OriginalArrivalTime: 26 Jun 2023 03:22:58.7939 (UTC) X-MS-Exchange-CrossTenant-FromEntityHeader: Hosted X-MS-Exchange-CrossTenant-Id: 686ea1d3-bc2b-4c6f-a92c-d99c5c301635 X-MS-Exchange-CrossTenant-MailboxType: HOSTED X-MS-Exchange-CrossTenant-UserPrincipalName: VbclUOinPyubmU0RKmHeAzCCuVJmE9TQW7X7OwIFRfn/U2zdH9VT6nNuM6yIIRSn36Cr1+GTiGMAa9eKWCEetw== X-MS-Exchange-Transport-CrossTenantHeadersStamped: DBBPR04MB7658 X-Spam-Status: No, score=-1.9 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,RCVD_IN_DNSWL_NONE,RCVD_IN_MSPIKE_H2,SPF_HELO_PASS,SPF_PASS, T_SCC_BODY_TEXT_LINE autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: <linux-media.vger.kernel.org> X-Mailing-List: linux-media@vger.kernel.org X-LSpam-Score: -4.7 (----) X-LSpam-Report: No, score=-4.7 required=5.0 tests=BAYES_00=-1.9,DKIMWL_WL_MED=0.001,DKIM_SIGNED=0.1,DKIM_VALID=-0.1,HEADER_FROM_DIFFERENT_DOMAINS=0.5,MAILING_LIST_MULTI=-1,RCVD_IN_DNSWL_MED=-2.3 autolearn=ham autolearn_force=no |
Series |
add ISI support for iMX93
|
|
Commit Message
G.N. Zhou (OSS)
June 26, 2023, 3:27 a.m. UTC
From: "Guoniu.zhou" <guoniu.zhou@nxp.com> Abstract gasket operation and driver should implement them for SoC which support gasket. i.MX93 use a different gasket which has different register definition compared with i.MX8. Hence implement the gasket callbacks in order to add ISI support for i.MX93. Signed-off-by: Guoniu.zhou <guoniu.zhou@nxp.com> --- .../platform/nxp/imx8-isi/imx8-isi-core.c | 110 ++++++++++++++++++ .../platform/nxp/imx8-isi/imx8-isi-core.h | 33 ++++++ .../platform/nxp/imx8-isi/imx8-isi-crossbar.c | 51 ++++---- 3 files changed, 169 insertions(+), 25 deletions(-)
Comments
Hi Guoniu, Thank you for the patch. On Mon, Jun 26, 2023 at 11:27:35AM +0800, guoniu.zhou@oss.nxp.com wrote: > From: "Guoniu.zhou" <guoniu.zhou@nxp.com> > > Abstract gasket operation and driver should implement them for SoC > which support gasket. > > i.MX93 use a different gasket which has different register definition > compared with i.MX8. Hence implement the gasket callbacks in order to > add ISI support for i.MX93. This patch does multiple things, and should as such be split in multiple patches: - One patch to move gasket configuration to an ops structure - One patch to add i.MX93 support For the first patch, I'd recommend moving the gasket operations to a new imx8-isi-gasket.c file. > Signed-off-by: Guoniu.zhou <guoniu.zhou@nxp.com> > --- > .../platform/nxp/imx8-isi/imx8-isi-core.c | 110 ++++++++++++++++++ > .../platform/nxp/imx8-isi/imx8-isi-core.h | 33 ++++++ > .../platform/nxp/imx8-isi/imx8-isi-crossbar.c | 51 ++++---- > 3 files changed, 169 insertions(+), 25 deletions(-) > > diff --git a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c > index 253e77189b69..d37145fb7f14 100644 > --- a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c > +++ b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c > @@ -14,6 +14,7 @@ > #include <linux/pm.h> > #include <linux/pm_runtime.h> > #include <linux/property.h> > +#include <linux/regmap.h> > #include <linux/slab.h> > #include <linux/string.h> > #include <linux/types.h> > @@ -279,6 +280,54 @@ static const struct clk_bulk_data mxc_imx8mn_clks[] = { > { .id = "apb" }, > }; > > +static int mxc_imx8_gasket_config(struct mxc_isi_dev *isi, > + const struct v4l2_mbus_frame_desc *fd, > + const struct v4l2_mbus_framefmt *fmt, > + const unsigned int port) > +{ > + u32 val; > + > + regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_HSIZE, fmt->width); > + regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_VSIZE, fmt->height); > + > + val = GASKET_CTRL_DATA_TYPE(fd->entry[0].bus.csi2.dt); > + if (fd->entry[0].bus.csi2.dt == MIPI_CSI2_DT_YUV422_8B) > + val |= GASKET_CTRL_DUAL_COMP_ENABLE; > + > + regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_CTRL, val); > + > + dev_dbg(isi->dev, "w/h=(%d, %d), data type=0x%x\n", > + fmt->width, fmt->height, > + fd->entry[0].bus.csi2.dt); I think this debug message can be dropped. > + > + return 0; > +} > + > +static int mxc_imx8_gasket_enable(struct mxc_isi_dev *isi, > + const unsigned int port) > +{ > + u32 val; > + > + regmap_read(isi->gasket, GASKET_BASE(port), &val); > + val |= GASKET_CTRL_ENABLE; > + > + regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_CTRL, val); regmap has regmap_set_bits(). > + > + return 0; > +} > + > +static void mxc_imx8_gasket_disable(struct mxc_isi_dev *isi, > + const unsigned int port) > +{ > + regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_CTRL, 0); > +} > + > +static const struct mxc_gasket_ops mxc_imx8_gasket_ops = { > + .config = mxc_imx8_gasket_config, > + .enable = mxc_imx8_gasket_enable, > + .disable = mxc_imx8_gasket_disable, > +}; > + > static const struct mxc_isi_plat_data mxc_imx8mn_data = { > .model = MXC_ISI_IMX8MN, > .num_ports = 1, > @@ -290,6 +339,7 @@ static const struct mxc_isi_plat_data mxc_imx8mn_data = { > .num_clks = ARRAY_SIZE(mxc_imx8mn_clks), > .buf_active_reverse = false, > .has_gasket = true, > + .gasket_ops = &mxc_imx8_gasket_ops, > .has_36bit_dma = false, > }; > > @@ -304,6 +354,65 @@ static const struct mxc_isi_plat_data mxc_imx8mp_data = { > .num_clks = ARRAY_SIZE(mxc_imx8mn_clks), > .buf_active_reverse = true, > .has_gasket = true, > + .gasket_ops = &mxc_imx8_gasket_ops, > + .has_36bit_dma = true, > +}; > + > +static int mxc_imx93_gasket_config(struct mxc_isi_dev *isi, > + const struct v4l2_mbus_frame_desc *fd, > + const struct v4l2_mbus_framefmt *fmt, > + const unsigned int port) > +{ > + u32 val; > + > + val = DISP_MIX_CAMERA_MUX_DATA_TYPE(fd->entry[0].bus.csi2.dt); > + regmap_write(isi->gasket, DISP_MIX_CAMERA_MUX, val); > + > + dev_dbg(isi->dev, "data type=0x%x\n", fd->entry[0].bus.csi2.dt); Same here. > + > + return 0; > +} > + > +static int mxc_imx93_gasket_enable(struct mxc_isi_dev *isi, > + const unsigned int port) > +{ > + u32 val; > + > + regmap_read(isi->gasket, DISP_MIX_CAMERA_MUX, &val); > + val |= DISP_MIX_CAMERA_MUX_GASKET_ENABLE; > + regmap_write(isi->gasket, DISP_MIX_CAMERA_MUX, val); > + > + return 0; > +} > + > +static void mxc_imx93_gasket_disable(struct mxc_isi_dev *isi, > + unsigned int port) > +{ > + u32 val; > + > + regmap_read(isi->gasket, DISP_MIX_CAMERA_MUX, &val); > + val &= ~DISP_MIX_CAMERA_MUX_GASKET_ENABLE; > + regmap_write(isi->gasket, DISP_MIX_CAMERA_MUX, val); Can you simplify this to regmap_write(isi->gasket, DISP_MIX_CAMERA_MUX, 0); ? > +} > + > +static const struct mxc_gasket_ops mxc_imx93_gasket_ops = { > + .config = mxc_imx93_gasket_config, > + .enable = mxc_imx93_gasket_enable, > + .disable = mxc_imx93_gasket_disable, > +}; > + > +static const struct mxc_isi_plat_data mxc_imx93_data = { > + .model = MXC_ISI_IMX93, > + .num_ports = 1, > + .num_channels = 1, > + .reg_offset = 0, > + .ier_reg = &mxc_imx8_isi_ier_v2, > + .set_thd = &mxc_imx8_isi_thd_v1, > + .clks = mxc_imx8mn_clks, > + .num_clks = ARRAY_SIZE(mxc_imx8mn_clks), > + .buf_active_reverse = true, > + .has_gasket = true, > + .gasket_ops = &mxc_imx93_gasket_ops, > .has_36bit_dma = true, The i.MX93 reference manual doesn't list the extended address registers. Is that an error in the documentation, or should .has_36bit_dma be false ? > }; > > @@ -518,6 +627,7 @@ static int mxc_isi_remove(struct platform_device *pdev) > static const struct of_device_id mxc_isi_of_match[] = { > { .compatible = "fsl,imx8mn-isi", .data = &mxc_imx8mn_data }, > { .compatible = "fsl,imx8mp-isi", .data = &mxc_imx8mp_data }, > + { .compatible = "fsl,imx93-isi", .data = &mxc_imx93_data }, > { /* sentinel */ }, > }; > MODULE_DEVICE_TABLE(of, mxc_isi_of_match); > diff --git a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h > index e469788a9e6c..c425edb6fbea 100644 > --- a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h > +++ b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h > @@ -18,6 +18,7 @@ > > #include <media/media-device.h> > #include <media/media-entity.h> > +#include <media/mipi-csi2.h> > #include <media/v4l2-async.h> > #include <media/v4l2-ctrls.h> > #include <media/v4l2-dev.h> > @@ -59,6 +60,27 @@ struct v4l2_m2m_dev; > #define MXC_ISI_M2M "mxc-isi-m2m" > #define MXC_MAX_PLANES 3 > > +/* GASKET (i.MX8MN and i.MX8MP only) */ > +#define GASKET_BASE(n) (0x0060 + (n) * 0x30) > + > +#define GASKET_CTRL 0x0000 > +#define GASKET_CTRL_DATA_TYPE(dt) ((dt) << 8) > +#define GASKET_CTRL_DATA_TYPE_MASK (0x3f << 8) > +#define GASKET_CTRL_DUAL_COMP_ENABLE BIT(1) > +#define GASKET_CTRL_ENABLE BIT(0) > + > +#define GASKET_HSIZE 0x0004 > +#define GASKET_VSIZE 0x0008 > + > +/* dispmix_GPR register (i.MX93 only) */ > +#define DISP_MIX_CAMERA_MUX 0x30 > +#define DISP_MIX_CAMERA_MUX_DATA_TYPE(x) (((x) & 0x3f) << 3) > +#define DISP_MIX_CAMERA_MUX_GASKET_ENABLE BIT(16) > + > +#define DISP_MIX_CSI_REG 0x48 > +#define DISP_MIX_CSI_REG_CFGFREQRANGE(x) ((x) & 0x3f) > +#define DISP_MIX_CSI_REG_HSFREQRANGE(x) (((x) & 0x7f) << 8) This isn't used. > + > struct mxc_isi_dev; > struct mxc_isi_m2m_ctx; > > @@ -147,9 +169,19 @@ struct mxc_isi_set_thd { > struct mxc_isi_panic_thd panic_set_thd_v; > }; > > +struct mxc_gasket_ops { > + int (*enable)(struct mxc_isi_dev *isi, const unsigned int port); > + int (*config)(struct mxc_isi_dev *isi, > + const struct v4l2_mbus_frame_desc *fd, > + const struct v4l2_mbus_framefmt *fmt, > + const unsigned int port); > + void (*disable)(struct mxc_isi_dev *isi, const unsigned int port); > +}; > + > enum model { > MXC_ISI_IMX8MN, > MXC_ISI_IMX8MP, > + MXC_ISI_IMX93, > }; > > struct mxc_isi_plat_data { > @@ -160,6 +192,7 @@ struct mxc_isi_plat_data { > const struct mxc_isi_ier_reg *ier_reg; > const struct mxc_isi_set_thd *set_thd; > const struct clk_bulk_data *clks; > + const struct mxc_gasket_ops *gasket_ops; > unsigned int num_clks; > bool buf_active_reverse; > bool has_gasket; The has_gasket field can be dropped, you can now check if gasket_ops it NULL instead. > diff --git a/drivers/media/platform/nxp/imx8-isi/imx8-isi-crossbar.c b/drivers/media/platform/nxp/imx8-isi/imx8-isi-crossbar.c > index f7447b2f4d77..855b31e3dade 100644 > --- a/drivers/media/platform/nxp/imx8-isi/imx8-isi-crossbar.c > +++ b/drivers/media/platform/nxp/imx8-isi/imx8-isi-crossbar.c > @@ -25,20 +25,6 @@ static inline struct mxc_isi_crossbar *to_isi_crossbar(struct v4l2_subdev *sd) > return container_of(sd, struct mxc_isi_crossbar, sd); > } > > -/* ----------------------------------------------------------------------------- > - * Media block control (i.MX8MN and i.MX8MP only) > - */ > -#define GASKET_BASE(n) (0x0060 + (n) * 0x30) > - > -#define GASKET_CTRL 0x0000 > -#define GASKET_CTRL_DATA_TYPE(dt) ((dt) << 8) > -#define GASKET_CTRL_DATA_TYPE_MASK (0x3f << 8) > -#define GASKET_CTRL_DUAL_COMP_ENABLE BIT(1) > -#define GASKET_CTRL_ENABLE BIT(0) > - > -#define GASKET_HSIZE 0x0004 > -#define GASKET_VSIZE 0x0008 > - > static int mxc_isi_crossbar_gasket_enable(struct mxc_isi_crossbar *xbar, > struct v4l2_subdev_state *state, > struct v4l2_subdev *remote_sd, > @@ -46,13 +32,16 @@ static int mxc_isi_crossbar_gasket_enable(struct mxc_isi_crossbar *xbar, > { > struct mxc_isi_dev *isi = xbar->isi; > const struct v4l2_mbus_framefmt *fmt; > + const struct mxc_gasket_ops *gasket_ops = NULL; > struct v4l2_mbus_frame_desc fd; > - u32 val; > int ret; > > if (!isi->pdata->has_gasket) > return 0; > > + if (isi->pdata->gasket_ops) > + gasket_ops = isi->pdata->gasket_ops; > + > /* > * Configure and enable the gasket with the frame size and CSI-2 data > * type. For YUV422 8-bit, enable dual component mode unconditionally, > @@ -77,16 +66,23 @@ static int mxc_isi_crossbar_gasket_enable(struct mxc_isi_crossbar *xbar, > if (!fmt) > return -EINVAL; > > - regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_HSIZE, fmt->width); > - regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_VSIZE, fmt->height); > - > - val = GASKET_CTRL_DATA_TYPE(fd.entry[0].bus.csi2.dt) > - | GASKET_CTRL_ENABLE; > - > - if (fd.entry[0].bus.csi2.dt == MIPI_CSI2_DT_YUV422_8B) > - val |= GASKET_CTRL_DUAL_COMP_ENABLE; > + if (gasket_ops && gasket_ops->config) { > + ret = gasket_ops->config(isi, &fd, fmt, port); > + if (ret) { > + dev_err(isi->dev, > + "failed to configure gasket%d\n", port); > + return ret; > + } > + } > > - regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_CTRL, val); > + if (gasket_ops && gasket_ops->enable) { > + ret = gasket_ops->enable(isi, port); > + if (ret) { > + dev_err(isi->dev, > + "failed to enable gasket%d\n", port); > + return ret; > + } > + } As you always call config and enable one after the other, is there a reason to have two operations, instead of just one enable operation as done today ? > > return 0; > } > @@ -95,11 +91,16 @@ static void mxc_isi_crossbar_gasket_disable(struct mxc_isi_crossbar *xbar, > unsigned int port) > { > struct mxc_isi_dev *isi = xbar->isi; > + const struct mxc_gasket_ops *gasket_ops = NULL; > > if (!isi->pdata->has_gasket) > return; > > - regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_CTRL, 0); > + if (isi->pdata->gasket_ops) > + gasket_ops = isi->pdata->gasket_ops; This can be written as const struct mxc_gasket_ops *gasket_ops = isi->pdata->gasket_ops; when declaraing the variable. > + > + if (gasket_ops && gasket_ops->disable) > + gasket_ops->disable(isi, port); > } > > /* -----------------------------------------------------------------------------
Hi Laurent, Thanks for your quick review and comments. For your comments, I will update in next version. > -----Original Message----- > From: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > Sent: 2023年6月26日 17:16 > To: G.N. Zhou (OSS) <guoniu.zhou@oss.nxp.com> > Cc: linux-media@vger.kernel.org; dl-linux-imx <linux-imx@nxp.com>; > devicetree@vger.kernel.org; mchehab@kernel.org; robh+dt@kernel.org; > krzysztof.kozlowski+dt@linaro.org; conor+dt@kernel.org; Xavier Roumegue > (OSS) <xavier.roumegue@oss.nxp.com>; kernel@pengutronix.de; > jacopo.mondi@ideasonboard.com; sakari.ailus@linux.intel.com > Subject: Re: [PATCH v2 2/2] media: nxp: imx-isi: add ISI support for i.MX93 > > Caution: This is an external email. Please take care when clicking links or opening > attachments. When in doubt, report the message using the 'Report this email' > button > > > Hi Guoniu, > > Thank you for the patch. > > On Mon, Jun 26, 2023 at 11:27:35AM +0800, guoniu.zhou@oss.nxp.com wrote: > > From: "Guoniu.zhou" <guoniu.zhou@nxp.com> > > > > Abstract gasket operation and driver should implement them for SoC > > which support gasket. > > > > i.MX93 use a different gasket which has different register definition > > compared with i.MX8. Hence implement the gasket callbacks in order to > > add ISI support for i.MX93. > > This patch does multiple things, and should as such be split in multiple > patches: > > - One patch to move gasket configuration to an ops structure > - One patch to add i.MX93 support > > For the first patch, I'd recommend moving the gasket operations to a new > imx8-isi-gasket.c file. > > > Signed-off-by: Guoniu.zhou <guoniu.zhou@nxp.com> > > --- > > .../platform/nxp/imx8-isi/imx8-isi-core.c | 110 ++++++++++++++++++ > > .../platform/nxp/imx8-isi/imx8-isi-core.h | 33 ++++++ > > .../platform/nxp/imx8-isi/imx8-isi-crossbar.c | 51 ++++---- > > 3 files changed, 169 insertions(+), 25 deletions(-) > > > > diff --git a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c > > b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c > > index 253e77189b69..d37145fb7f14 100644 > > --- a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c > > +++ b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c > > @@ -14,6 +14,7 @@ > > #include <linux/pm.h> > > #include <linux/pm_runtime.h> > > #include <linux/property.h> > > +#include <linux/regmap.h> > > #include <linux/slab.h> > > #include <linux/string.h> > > #include <linux/types.h> > > @@ -279,6 +280,54 @@ static const struct clk_bulk_data mxc_imx8mn_clks[] > = { > > { .id = "apb" }, > > }; > > > > +static int mxc_imx8_gasket_config(struct mxc_isi_dev *isi, > > + const struct v4l2_mbus_frame_desc *fd, > > + const struct v4l2_mbus_framefmt *fmt, > > + const unsigned int port) { > > + u32 val; > > + > > + regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_HSIZE, > fmt->width); > > + regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_VSIZE, > > + fmt->height); > > + > > + val = GASKET_CTRL_DATA_TYPE(fd->entry[0].bus.csi2.dt); > > + if (fd->entry[0].bus.csi2.dt == MIPI_CSI2_DT_YUV422_8B) > > + val |= GASKET_CTRL_DUAL_COMP_ENABLE; > > + > > + regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_CTRL, val); > > + > > + dev_dbg(isi->dev, "w/h=(%d, %d), data type=0x%x\n", > > + fmt->width, fmt->height, > > + fd->entry[0].bus.csi2.dt); > > I think this debug message can be dropped. > > > + > > + return 0; > > +} > > + > > +static int mxc_imx8_gasket_enable(struct mxc_isi_dev *isi, > > + const unsigned int port) { > > + u32 val; > > + > > + regmap_read(isi->gasket, GASKET_BASE(port), &val); > > + val |= GASKET_CTRL_ENABLE; > > + > > + regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_CTRL, val); > > regmap has regmap_set_bits(). > > > + > > + return 0; > > +} > > + > > +static void mxc_imx8_gasket_disable(struct mxc_isi_dev *isi, > > + const unsigned int port) { > > + regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_CTRL, 0); } > > + > > +static const struct mxc_gasket_ops mxc_imx8_gasket_ops = { > > + .config = mxc_imx8_gasket_config, > > + .enable = mxc_imx8_gasket_enable, > > + .disable = mxc_imx8_gasket_disable, }; > > + > > static const struct mxc_isi_plat_data mxc_imx8mn_data = { > > .model = MXC_ISI_IMX8MN, > > .num_ports = 1, > > @@ -290,6 +339,7 @@ static const struct mxc_isi_plat_data > mxc_imx8mn_data = { > > .num_clks = ARRAY_SIZE(mxc_imx8mn_clks), > > .buf_active_reverse = false, > > .has_gasket = true, > > + .gasket_ops = &mxc_imx8_gasket_ops, > > .has_36bit_dma = false, > > }; > > > > @@ -304,6 +354,65 @@ static const struct mxc_isi_plat_data > mxc_imx8mp_data = { > > .num_clks = ARRAY_SIZE(mxc_imx8mn_clks), > > .buf_active_reverse = true, > > .has_gasket = true, > > + .gasket_ops = &mxc_imx8_gasket_ops, > > + .has_36bit_dma = true, > > +}; > > + > > +static int mxc_imx93_gasket_config(struct mxc_isi_dev *isi, > > + const struct v4l2_mbus_frame_desc > *fd, > > + const struct v4l2_mbus_framefmt > *fmt, > > + const unsigned int port) { > > + u32 val; > > + > > + val = DISP_MIX_CAMERA_MUX_DATA_TYPE(fd->entry[0].bus.csi2.dt); > > + regmap_write(isi->gasket, DISP_MIX_CAMERA_MUX, val); > > + > > + dev_dbg(isi->dev, "data type=0x%x\n", fd->entry[0].bus.csi2.dt); > > Same here. > > > + > > + return 0; > > +} > > + > > +static int mxc_imx93_gasket_enable(struct mxc_isi_dev *isi, > > + const unsigned int port) { > > + u32 val; > > + > > + regmap_read(isi->gasket, DISP_MIX_CAMERA_MUX, &val); > > + val |= DISP_MIX_CAMERA_MUX_GASKET_ENABLE; > > + regmap_write(isi->gasket, DISP_MIX_CAMERA_MUX, val); > > + > > + return 0; > > +} > > + > > +static void mxc_imx93_gasket_disable(struct mxc_isi_dev *isi, > > + unsigned int port) { > > + u32 val; > > + > > + regmap_read(isi->gasket, DISP_MIX_CAMERA_MUX, &val); > > + val &= ~DISP_MIX_CAMERA_MUX_GASKET_ENABLE; > > + regmap_write(isi->gasket, DISP_MIX_CAMERA_MUX, val); > > Can you simplify this to > > regmap_write(isi->gasket, DISP_MIX_CAMERA_MUX, 0); > > ? > > > +} > > + > > +static const struct mxc_gasket_ops mxc_imx93_gasket_ops = { > > + .config = mxc_imx93_gasket_config, > > + .enable = mxc_imx93_gasket_enable, > > + .disable = mxc_imx93_gasket_disable, }; > > + > > +static const struct mxc_isi_plat_data mxc_imx93_data = { > > + .model = MXC_ISI_IMX93, > > + .num_ports = 1, > > + .num_channels = 1, > > + .reg_offset = 0, > > + .ier_reg = &mxc_imx8_isi_ier_v2, > > + .set_thd = &mxc_imx8_isi_thd_v1, > > + .clks = mxc_imx8mn_clks, > > + .num_clks = ARRAY_SIZE(mxc_imx8mn_clks), > > + .buf_active_reverse = true, > > + .has_gasket = true, > > + .gasket_ops = &mxc_imx93_gasket_ops, > > .has_36bit_dma = true, > > The i.MX93 reference manual doesn't list the extended address registers. > Is that an error in the documentation, or should .has_36bit_dma be false ? Yes, you are right, we should set .has_36bit_dma be false since it's dropped in our latest external reference manual compared with my local one(a little older). Let's follow the latest one. > > > }; > > > > @@ -518,6 +627,7 @@ static int mxc_isi_remove(struct platform_device > > *pdev) static const struct of_device_id mxc_isi_of_match[] = { > > { .compatible = "fsl,imx8mn-isi", .data = &mxc_imx8mn_data }, > > { .compatible = "fsl,imx8mp-isi", .data = &mxc_imx8mp_data }, > > + { .compatible = "fsl,imx93-isi", .data = &mxc_imx93_data }, > > { /* sentinel */ }, > > }; > > MODULE_DEVICE_TABLE(of, mxc_isi_of_match); diff --git > > a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h > > b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h > > index e469788a9e6c..c425edb6fbea 100644 > > --- a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h > > +++ b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h > > @@ -18,6 +18,7 @@ > > > > #include <media/media-device.h> > > #include <media/media-entity.h> > > +#include <media/mipi-csi2.h> > > #include <media/v4l2-async.h> > > #include <media/v4l2-ctrls.h> > > #include <media/v4l2-dev.h> > > @@ -59,6 +60,27 @@ struct v4l2_m2m_dev; > > #define MXC_ISI_M2M "mxc-isi-m2m" > > #define MXC_MAX_PLANES 3 > > > > +/* GASKET (i.MX8MN and i.MX8MP only) */ > > +#define GASKET_BASE(n) (0x0060 + (n) * > 0x30) > > + > > +#define GASKET_CTRL 0x0000 > > +#define GASKET_CTRL_DATA_TYPE(dt) ((dt) << 8) > > +#define GASKET_CTRL_DATA_TYPE_MASK (0x3f << 8) > > +#define GASKET_CTRL_DUAL_COMP_ENABLE BIT(1) > > +#define GASKET_CTRL_ENABLE BIT(0) > > + > > +#define GASKET_HSIZE 0x0004 > > +#define GASKET_VSIZE 0x0008 > > + > > +/* dispmix_GPR register (i.MX93 only) */ > > +#define DISP_MIX_CAMERA_MUX 0x30 > > +#define DISP_MIX_CAMERA_MUX_DATA_TYPE(x) (((x) & 0x3f) << 3) > > +#define DISP_MIX_CAMERA_MUX_GASKET_ENABLE BIT(16) > > + > > +#define DISP_MIX_CSI_REG 0x48 > > +#define DISP_MIX_CSI_REG_CFGFREQRANGE(x) ((x) & 0x3f) > > +#define DISP_MIX_CSI_REG_HSFREQRANGE(x) (((x) & 0x7f) << 8) > > This isn't used. > > > + > > struct mxc_isi_dev; > > struct mxc_isi_m2m_ctx; > > > > @@ -147,9 +169,19 @@ struct mxc_isi_set_thd { > > struct mxc_isi_panic_thd panic_set_thd_v; }; > > > > +struct mxc_gasket_ops { > > + int (*enable)(struct mxc_isi_dev *isi, const unsigned int port); > > + int (*config)(struct mxc_isi_dev *isi, > > + const struct v4l2_mbus_frame_desc *fd, > > + const struct v4l2_mbus_framefmt *fmt, > > + const unsigned int port); > > + void (*disable)(struct mxc_isi_dev *isi, const unsigned int > > +port); }; > > + > > enum model { > > MXC_ISI_IMX8MN, > > MXC_ISI_IMX8MP, > > + MXC_ISI_IMX93, > > }; > > > > struct mxc_isi_plat_data { > > @@ -160,6 +192,7 @@ struct mxc_isi_plat_data { > > const struct mxc_isi_ier_reg *ier_reg; > > const struct mxc_isi_set_thd *set_thd; > > const struct clk_bulk_data *clks; > > + const struct mxc_gasket_ops *gasket_ops; > > unsigned int num_clks; > > bool buf_active_reverse; > > bool has_gasket; > > The has_gasket field can be dropped, you can now check if gasket_ops it NULL > instead. Good idea. > > > diff --git a/drivers/media/platform/nxp/imx8-isi/imx8-isi-crossbar.c > > b/drivers/media/platform/nxp/imx8-isi/imx8-isi-crossbar.c > > index f7447b2f4d77..855b31e3dade 100644 > > --- a/drivers/media/platform/nxp/imx8-isi/imx8-isi-crossbar.c > > +++ b/drivers/media/platform/nxp/imx8-isi/imx8-isi-crossbar.c > > @@ -25,20 +25,6 @@ static inline struct mxc_isi_crossbar > *to_isi_crossbar(struct v4l2_subdev *sd) > > return container_of(sd, struct mxc_isi_crossbar, sd); } > > > > -/* > > ---------------------------------------------------------------------- > > ------- > > - * Media block control (i.MX8MN and i.MX8MP only) > > - */ > > -#define GASKET_BASE(n) (0x0060 + (n) * > 0x30) > > - > > -#define GASKET_CTRL 0x0000 > > -#define GASKET_CTRL_DATA_TYPE(dt) ((dt) << 8) > > -#define GASKET_CTRL_DATA_TYPE_MASK (0x3f << 8) > > -#define GASKET_CTRL_DUAL_COMP_ENABLE BIT(1) > > -#define GASKET_CTRL_ENABLE BIT(0) > > - > > -#define GASKET_HSIZE 0x0004 > > -#define GASKET_VSIZE 0x0008 > > - > > static int mxc_isi_crossbar_gasket_enable(struct mxc_isi_crossbar *xbar, > > struct v4l2_subdev_state > *state, > > struct v4l2_subdev > *remote_sd, > > @@ -46,13 +32,16 @@ static int mxc_isi_crossbar_gasket_enable(struct > > mxc_isi_crossbar *xbar, { > > struct mxc_isi_dev *isi = xbar->isi; > > const struct v4l2_mbus_framefmt *fmt; > > + const struct mxc_gasket_ops *gasket_ops = NULL; > > struct v4l2_mbus_frame_desc fd; > > - u32 val; > > int ret; > > > > if (!isi->pdata->has_gasket) > > return 0; > > > > + if (isi->pdata->gasket_ops) > > + gasket_ops = isi->pdata->gasket_ops; > > + > > /* > > * Configure and enable the gasket with the frame size and CSI-2 data > > * type. For YUV422 8-bit, enable dual component mode > > unconditionally, @@ -77,16 +66,23 @@ static int > mxc_isi_crossbar_gasket_enable(struct mxc_isi_crossbar *xbar, > > if (!fmt) > > return -EINVAL; > > > > - regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_HSIZE, > fmt->width); > > - regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_VSIZE, > fmt->height); > > - > > - val = GASKET_CTRL_DATA_TYPE(fd.entry[0].bus.csi2.dt) > > - | GASKET_CTRL_ENABLE; > > - > > - if (fd.entry[0].bus.csi2.dt == MIPI_CSI2_DT_YUV422_8B) > > - val |= GASKET_CTRL_DUAL_COMP_ENABLE; > > + if (gasket_ops && gasket_ops->config) { > > + ret = gasket_ops->config(isi, &fd, fmt, port); > > + if (ret) { > > + dev_err(isi->dev, > > + "failed to configure gasket%d\n", port); > > + return ret; > > + } > > + } > > > > - regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_CTRL, val); > > + if (gasket_ops && gasket_ops->enable) { > > + ret = gasket_ops->enable(isi, port); > > + if (ret) { > > + dev_err(isi->dev, > > + "failed to enable gasket%d\n", port); > > + return ret; > > + } > > + } > > As you always call config and enable one after the other, is there a reason to > have two operations, instead of just one enable operation as done today ? No special reason just want to highlight gasket HW configuration sequence. but from HW view, it's no difference moving it in enable operation. Will update. > > > > > return 0; > > } > > @@ -95,11 +91,16 @@ static void mxc_isi_crossbar_gasket_disable(struct > mxc_isi_crossbar *xbar, > > unsigned int port) { > > struct mxc_isi_dev *isi = xbar->isi; > > + const struct mxc_gasket_ops *gasket_ops = NULL; > > > > if (!isi->pdata->has_gasket) > > return; > > > > - regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_CTRL, 0); > > + if (isi->pdata->gasket_ops) > > + gasket_ops = isi->pdata->gasket_ops; > > This can be written as > > const struct mxc_gasket_ops *gasket_ops = isi->pdata->gasket_ops; > > when declaraing the variable. > > > + > > + if (gasket_ops && gasket_ops->disable) > > + gasket_ops->disable(isi, port); > > } > > > > /* ----------------------------------------------------------------------------- > > -- > Regards, > > Laurent Pinchart
Hi Guoniu, On Mon, Jun 26, 2023 at 11:27:35AM +0800, guoniu.zhou@oss.nxp.com wrote: > From: "Guoniu.zhou" <guoniu.zhou@nxp.com> > > Abstract gasket operation and driver should implement them for SoC > which support gasket. > > i.MX93 use a different gasket which has different register definition > compared with i.MX8. Hence implement the gasket callbacks in order to > add ISI support for i.MX93. > > Signed-off-by: Guoniu.zhou <guoniu.zhou@nxp.com> > --- > .../platform/nxp/imx8-isi/imx8-isi-core.c | 110 ++++++++++++++++++ > .../platform/nxp/imx8-isi/imx8-isi-core.h | 33 ++++++ > .../platform/nxp/imx8-isi/imx8-isi-crossbar.c | 51 ++++---- > 3 files changed, 169 insertions(+), 25 deletions(-) > > diff --git a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c > index 253e77189b69..d37145fb7f14 100644 > --- a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c > +++ b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c > @@ -14,6 +14,7 @@ > #include <linux/pm.h> > #include <linux/pm_runtime.h> > #include <linux/property.h> > +#include <linux/regmap.h> > #include <linux/slab.h> > #include <linux/string.h> > #include <linux/types.h> > @@ -279,6 +280,54 @@ static const struct clk_bulk_data mxc_imx8mn_clks[] = { > { .id = "apb" }, > }; > > +static int mxc_imx8_gasket_config(struct mxc_isi_dev *isi, > + const struct v4l2_mbus_frame_desc *fd, > + const struct v4l2_mbus_framefmt *fmt, > + const unsigned int port) > +{ > + u32 val; > + > + regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_HSIZE, fmt->width); > + regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_VSIZE, fmt->height); > + > + val = GASKET_CTRL_DATA_TYPE(fd->entry[0].bus.csi2.dt); > + if (fd->entry[0].bus.csi2.dt == MIPI_CSI2_DT_YUV422_8B) > + val |= GASKET_CTRL_DUAL_COMP_ENABLE; > + > + regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_CTRL, val); > + > + dev_dbg(isi->dev, "w/h=(%d, %d), data type=0x%x\n", > + fmt->width, fmt->height, > + fd->entry[0].bus.csi2.dt); Receive warning from checkpatch.pl: CHECK: Alignment should match open parenthesis #49: FILE: drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c:300: + dev_dbg(isi->dev, "w/h=(%d, %d), data type=0x%x\n", + fmt->width, fmt->height, > + > + return 0; > +} > + > +static int mxc_imx8_gasket_enable(struct mxc_isi_dev *isi, > + const unsigned int port) > +{ > + u32 val; > + > + regmap_read(isi->gasket, GASKET_BASE(port), &val); > + val |= GASKET_CTRL_ENABLE; > + > + regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_CTRL, val); > + > + return 0; > +} > + > +static void mxc_imx8_gasket_disable(struct mxc_isi_dev *isi, > + const unsigned int port) > +{ > + regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_CTRL, 0); > +} > + > +static const struct mxc_gasket_ops mxc_imx8_gasket_ops = { > + .config = mxc_imx8_gasket_config, > + .enable = mxc_imx8_gasket_enable, > + .disable = mxc_imx8_gasket_disable, > +}; > + > static const struct mxc_isi_plat_data mxc_imx8mn_data = { > .model = MXC_ISI_IMX8MN, > .num_ports = 1, > @@ -290,6 +339,7 @@ static const struct mxc_isi_plat_data mxc_imx8mn_data = { > .num_clks = ARRAY_SIZE(mxc_imx8mn_clks), > .buf_active_reverse = false, > .has_gasket = true, > + .gasket_ops = &mxc_imx8_gasket_ops, > .has_36bit_dma = false, > }; > > @@ -304,6 +354,65 @@ static const struct mxc_isi_plat_data mxc_imx8mp_data = { > .num_clks = ARRAY_SIZE(mxc_imx8mn_clks), > .buf_active_reverse = true, > .has_gasket = true, > + .gasket_ops = &mxc_imx8_gasket_ops, > + .has_36bit_dma = true, > +}; > + > +static int mxc_imx93_gasket_config(struct mxc_isi_dev *isi, > + const struct v4l2_mbus_frame_desc *fd, > + const struct v4l2_mbus_framefmt *fmt, > + const unsigned int port) > +{ > + u32 val; > + > + val = DISP_MIX_CAMERA_MUX_DATA_TYPE(fd->entry[0].bus.csi2.dt); > + regmap_write(isi->gasket, DISP_MIX_CAMERA_MUX, val); > + > + dev_dbg(isi->dev, "data type=0x%x\n", fd->entry[0].bus.csi2.dt); > + > + return 0; > +} > + > +static int mxc_imx93_gasket_enable(struct mxc_isi_dev *isi, > + const unsigned int port) > +{ > + u32 val; > + > + regmap_read(isi->gasket, DISP_MIX_CAMERA_MUX, &val); > + val |= DISP_MIX_CAMERA_MUX_GASKET_ENABLE; > + regmap_write(isi->gasket, DISP_MIX_CAMERA_MUX, val); > + > + return 0; > +} > + > +static void mxc_imx93_gasket_disable(struct mxc_isi_dev *isi, > + unsigned int port) > +{ > + u32 val; > + > + regmap_read(isi->gasket, DISP_MIX_CAMERA_MUX, &val); > + val &= ~DISP_MIX_CAMERA_MUX_GASKET_ENABLE; > + regmap_write(isi->gasket, DISP_MIX_CAMERA_MUX, val); > +} > + > +static const struct mxc_gasket_ops mxc_imx93_gasket_ops = { > + .config = mxc_imx93_gasket_config, > + .enable = mxc_imx93_gasket_enable, > + .disable = mxc_imx93_gasket_disable, > +}; > + > +static const struct mxc_isi_plat_data mxc_imx93_data = { > + .model = MXC_ISI_IMX93, > + .num_ports = 1, > + .num_channels = 1, > + .reg_offset = 0, > + .ier_reg = &mxc_imx8_isi_ier_v2, > + .set_thd = &mxc_imx8_isi_thd_v1, > + .clks = mxc_imx8mn_clks, > + .num_clks = ARRAY_SIZE(mxc_imx8mn_clks), > + .buf_active_reverse = true, > + .has_gasket = true, > + .gasket_ops = &mxc_imx93_gasket_ops, > .has_36bit_dma = true, > }; > > @@ -518,6 +627,7 @@ static int mxc_isi_remove(struct platform_device *pdev) > static const struct of_device_id mxc_isi_of_match[] = { > { .compatible = "fsl,imx8mn-isi", .data = &mxc_imx8mn_data }, > { .compatible = "fsl,imx8mp-isi", .data = &mxc_imx8mp_data }, > + { .compatible = "fsl,imx93-isi", .data = &mxc_imx93_data }, > { /* sentinel */ }, > }; > MODULE_DEVICE_TABLE(of, mxc_isi_of_match); > diff --git a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h > index e469788a9e6c..c425edb6fbea 100644 > --- a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h > +++ b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h > @@ -18,6 +18,7 @@ > > #include <media/media-device.h> > #include <media/media-entity.h> > +#include <media/mipi-csi2.h> > #include <media/v4l2-async.h> > #include <media/v4l2-ctrls.h> > #include <media/v4l2-dev.h> > @@ -59,6 +60,27 @@ struct v4l2_m2m_dev; > #define MXC_ISI_M2M "mxc-isi-m2m" > #define MXC_MAX_PLANES 3 > > +/* GASKET (i.MX8MN and i.MX8MP only) */ > +#define GASKET_BASE(n) (0x0060 + (n) * 0x30) > + > +#define GASKET_CTRL 0x0000 > +#define GASKET_CTRL_DATA_TYPE(dt) ((dt) << 8) > +#define GASKET_CTRL_DATA_TYPE_MASK (0x3f << 8) > +#define GASKET_CTRL_DUAL_COMP_ENABLE BIT(1) > +#define GASKET_CTRL_ENABLE BIT(0) > + > +#define GASKET_HSIZE 0x0004 > +#define GASKET_VSIZE 0x0008 > + > +/* dispmix_GPR register (i.MX93 only) */ > +#define DISP_MIX_CAMERA_MUX 0x30 > +#define DISP_MIX_CAMERA_MUX_DATA_TYPE(x) (((x) & 0x3f) << 3) > +#define DISP_MIX_CAMERA_MUX_GASKET_ENABLE BIT(16) > + > +#define DISP_MIX_CSI_REG 0x48 > +#define DISP_MIX_CSI_REG_CFGFREQRANGE(x) ((x) & 0x3f) > +#define DISP_MIX_CSI_REG_HSFREQRANGE(x) (((x) & 0x7f) << 8) > + ^Can you use tabs instead of space here? > struct mxc_isi_dev; > struct mxc_isi_m2m_ctx; > > @@ -147,9 +169,19 @@ struct mxc_isi_set_thd { > struct mxc_isi_panic_thd panic_set_thd_v; > }; > > +struct mxc_gasket_ops { > + int (*enable)(struct mxc_isi_dev *isi, const unsigned int port); > + int (*config)(struct mxc_isi_dev *isi, > + const struct v4l2_mbus_frame_desc *fd, > + const struct v4l2_mbus_framefmt *fmt, > + const unsigned int port); > + void (*disable)(struct mxc_isi_dev *isi, const unsigned int port); > +}; > + > enum model { > MXC_ISI_IMX8MN, > MXC_ISI_IMX8MP, > + MXC_ISI_IMX93, > }; > > struct mxc_isi_plat_data { > @@ -160,6 +192,7 @@ struct mxc_isi_plat_data { > const struct mxc_isi_ier_reg *ier_reg; > const struct mxc_isi_set_thd *set_thd; > const struct clk_bulk_data *clks; > + const struct mxc_gasket_ops *gasket_ops; > unsigned int num_clks; > bool buf_active_reverse; > bool has_gasket; > diff --git a/drivers/media/platform/nxp/imx8-isi/imx8-isi-crossbar.c b/drivers/media/platform/nxp/imx8-isi/imx8-isi-crossbar.c > index f7447b2f4d77..855b31e3dade 100644 > --- a/drivers/media/platform/nxp/imx8-isi/imx8-isi-crossbar.c > +++ b/drivers/media/platform/nxp/imx8-isi/imx8-isi-crossbar.c > @@ -25,20 +25,6 @@ static inline struct mxc_isi_crossbar *to_isi_crossbar(struct v4l2_subdev *sd) > return container_of(sd, struct mxc_isi_crossbar, sd); > } > > -/* ----------------------------------------------------------------------------- > - * Media block control (i.MX8MN and i.MX8MP only) > - */ > -#define GASKET_BASE(n) (0x0060 + (n) * 0x30) > - > -#define GASKET_CTRL 0x0000 > -#define GASKET_CTRL_DATA_TYPE(dt) ((dt) << 8) > -#define GASKET_CTRL_DATA_TYPE_MASK (0x3f << 8) > -#define GASKET_CTRL_DUAL_COMP_ENABLE BIT(1) > -#define GASKET_CTRL_ENABLE BIT(0) > - > -#define GASKET_HSIZE 0x0004 > -#define GASKET_VSIZE 0x0008 > - > static int mxc_isi_crossbar_gasket_enable(struct mxc_isi_crossbar *xbar, > struct v4l2_subdev_state *state, > struct v4l2_subdev *remote_sd, > @@ -46,13 +32,16 @@ static int mxc_isi_crossbar_gasket_enable(struct mxc_isi_crossbar *xbar, > { > struct mxc_isi_dev *isi = xbar->isi; > const struct v4l2_mbus_framefmt *fmt; > + const struct mxc_gasket_ops *gasket_ops = NULL; > struct v4l2_mbus_frame_desc fd; > - u32 val; > int ret; > > if (!isi->pdata->has_gasket) > return 0; > > + if (isi->pdata->gasket_ops) > + gasket_ops = isi->pdata->gasket_ops; > + > /* > * Configure and enable the gasket with the frame size and CSI-2 data > * type. For YUV422 8-bit, enable dual component mode unconditionally, > @@ -77,16 +66,23 @@ static int mxc_isi_crossbar_gasket_enable(struct mxc_isi_crossbar *xbar, > if (!fmt) > return -EINVAL; > > - regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_HSIZE, fmt->width); > - regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_VSIZE, fmt->height); > - > - val = GASKET_CTRL_DATA_TYPE(fd.entry[0].bus.csi2.dt) > - | GASKET_CTRL_ENABLE; > - > - if (fd.entry[0].bus.csi2.dt == MIPI_CSI2_DT_YUV422_8B) > - val |= GASKET_CTRL_DUAL_COMP_ENABLE; > + if (gasket_ops && gasket_ops->config) { > + ret = gasket_ops->config(isi, &fd, fmt, port); > + if (ret) { > + dev_err(isi->dev, > + "failed to configure gasket%d\n", port); What about keep this print on the same line? > + return ret; > + } > + } > > - regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_CTRL, val); > + if (gasket_ops && gasket_ops->enable) { > + ret = gasket_ops->enable(isi, port); > + if (ret) { > + dev_err(isi->dev, > + "failed to enable gasket%d\n", port); Same here :) > + return ret; > + } > + } > > return 0; > } > @@ -95,11 +91,16 @@ static void mxc_isi_crossbar_gasket_disable(struct mxc_isi_crossbar *xbar, > unsigned int port) > { > struct mxc_isi_dev *isi = xbar->isi; > + const struct mxc_gasket_ops *gasket_ops = NULL; > > if (!isi->pdata->has_gasket) > return; > > - regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_CTRL, 0); > + if (isi->pdata->gasket_ops) > + gasket_ops = isi->pdata->gasket_ops; > + > + if (gasket_ops && gasket_ops->disable) > + gasket_ops->disable(isi, port); > } Thanks & Regards, Tommaso > > /* ----------------------------------------------------------------------------- > -- > 2.37.1 >
Hi Tommaso, Thanks for your comments. I have updated version 3 and your comments have been handled in the new version patches. > -----Original Message----- > From: Tommaso Merciai <tomm.merciai@gmail.com> > Sent: 2023年6月27日 16:26 > To: G.N. Zhou (OSS) <guoniu.zhou@oss.nxp.com> > Cc: linux-media@vger.kernel.org; dl-linux-imx <linux-imx@nxp.com>; > devicetree@vger.kernel.org; laurent.pinchart@ideasonboard.com; > mchehab@kernel.org; robh+dt@kernel.org; krzysztof.kozlowski+dt@linaro.org; > conor+dt@kernel.org; Xavier Roumegue (OSS) > <xavier.roumegue@oss.nxp.com>; kernel@pengutronix.de; > jacopo.mondi@ideasonboard.com; sakari.ailus@linux.intel.com > Subject: Re: [PATCH v2 2/2] media: nxp: imx-isi: add ISI support for i.MX93 > > Caution: This is an external email. Please take care when clicking links or opening > attachments. When in doubt, report the message using the 'Report this email' > button > > > Hi Guoniu, > > On Mon, Jun 26, 2023 at 11:27:35AM +0800, guoniu.zhou@oss.nxp.com wrote: > > From: "Guoniu.zhou" <guoniu.zhou@nxp.com> > > > > Abstract gasket operation and driver should implement them for SoC > > which support gasket. > > > > i.MX93 use a different gasket which has different register definition > > compared with i.MX8. Hence implement the gasket callbacks in order to > > add ISI support for i.MX93. > > > > Signed-off-by: Guoniu.zhou <guoniu.zhou@nxp.com> > > --- > > .../platform/nxp/imx8-isi/imx8-isi-core.c | 110 ++++++++++++++++++ > > .../platform/nxp/imx8-isi/imx8-isi-core.h | 33 ++++++ > > .../platform/nxp/imx8-isi/imx8-isi-crossbar.c | 51 ++++---- > > 3 files changed, 169 insertions(+), 25 deletions(-) > > > > diff --git a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c > > b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c > > index 253e77189b69..d37145fb7f14 100644 > > --- a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c > > +++ b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c > > @@ -14,6 +14,7 @@ > > #include <linux/pm.h> > > #include <linux/pm_runtime.h> > > #include <linux/property.h> > > +#include <linux/regmap.h> > > #include <linux/slab.h> > > #include <linux/string.h> > > #include <linux/types.h> > > @@ -279,6 +280,54 @@ static const struct clk_bulk_data mxc_imx8mn_clks[] > = { > > { .id = "apb" }, > > }; > > > > +static int mxc_imx8_gasket_config(struct mxc_isi_dev *isi, > > + const struct v4l2_mbus_frame_desc *fd, > > + const struct v4l2_mbus_framefmt *fmt, > > + const unsigned int port) { > > + u32 val; > > + > > + regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_HSIZE, > fmt->width); > > + regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_VSIZE, > > + fmt->height); > > + > > + val = GASKET_CTRL_DATA_TYPE(fd->entry[0].bus.csi2.dt); > > + if (fd->entry[0].bus.csi2.dt == MIPI_CSI2_DT_YUV422_8B) > > + val |= GASKET_CTRL_DUAL_COMP_ENABLE; > > + > > + regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_CTRL, val); > > + > > + dev_dbg(isi->dev, "w/h=(%d, %d), data type=0x%x\n", > > + fmt->width, fmt->height, > > + fd->entry[0].bus.csi2.dt); > > Receive warning from checkpatch.pl: Drop the debug message in v3 > > CHECK: Alignment should match open parenthesis > #49: FILE: drivers/media/platform/nx p/imx8-isi/imx8-isi-core.c:300: > + dev_dbg(isi->dev, "w/h=(%d, %d), data type=0x%x\n", > + fmt->width, fmt->height, > > > + > > + return 0; > > +} > > + > > +static int mxc_imx8_gasket_enable(struct mxc_isi_dev *isi, > > + const unsigned int port) { > > + u32 val; > > + > > + regmap_read(isi->gasket, GASKET_BASE(port), &val); > > + val |= GASKET_CTRL_ENABLE; > > + > > + regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_CTRL, val); > > + > > + return 0; > > +} > > + > > +static void mxc_imx8_gasket_disable(struct mxc_isi_dev *isi, > > + const unsigned int port) { > > + regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_CTRL, 0); } > > + > > +static const struct mxc_gasket_ops mxc_imx8_gasket_ops = { > > + .config = mxc_imx8_gasket_config, > > + .enable = mxc_imx8_gasket_enable, > > + .disable = mxc_imx8_gasket_disable, }; > > + > > static const struct mxc_isi_plat_data mxc_imx8mn_data = { > > .model = MXC_ISI_IMX8MN, > > .num_ports = 1, > > @@ -290,6 +339,7 @@ static const struct mxc_isi_plat_data > mxc_imx8mn_data = { > > .num_clks = ARRAY_SIZE(mxc_imx8mn_clks), > > .buf_active_reverse = false, > > .has_gasket = true, > > + .gasket_ops = &mxc_imx8_gasket_ops, > > .has_36bit_dma = false, > > }; > > > > @@ -304,6 +354,65 @@ static const struct mxc_isi_plat_data > mxc_imx8mp_data = { > > .num_clks = ARRAY_SIZE(mxc_imx8mn_clks), > > .buf_active_reverse = true, > > .has_gasket = true, > > + .gasket_ops = &mxc_imx8_gasket_ops, > > + .has_36bit_dma = true, > > +}; > > + > > +static int mxc_imx93_gasket_config(struct mxc_isi_dev *isi, > > + const struct v4l2_mbus_frame_desc > *fd, > > + const struct v4l2_mbus_framefmt > *fmt, > > + const unsigned int port) { > > + u32 val; > > + > > + val = DISP_MIX_CAMERA_MUX_DATA_TYPE(fd->entry[0].bus.csi2.dt); > > + regmap_write(isi->gasket, DISP_MIX_CAMERA_MUX, val); > > + > > + dev_dbg(isi->dev, "data type=0x%x\n", fd->entry[0].bus.csi2.dt); > > + > > + return 0; > > +} > > + > > +static int mxc_imx93_gasket_enable(struct mxc_isi_dev *isi, > > + const unsigned int port) { > > + u32 val; > > + > > + regmap_read(isi->gasket, DISP_MIX_CAMERA_MUX, &val); > > + val |= DISP_MIX_CAMERA_MUX_GASKET_ENABLE; > > + regmap_write(isi->gasket, DISP_MIX_CAMERA_MUX, val); > > + > > + return 0; > > +} > > + > > +static void mxc_imx93_gasket_disable(struct mxc_isi_dev *isi, > > + unsigned int port) { > > + u32 val; > > + > > + regmap_read(isi->gasket, DISP_MIX_CAMERA_MUX, &val); > > + val &= ~DISP_MIX_CAMERA_MUX_GASKET_ENABLE; > > + regmap_write(isi->gasket, DISP_MIX_CAMERA_MUX, val); } > > + > > +static const struct mxc_gasket_ops mxc_imx93_gasket_ops = { > > + .config = mxc_imx93_gasket_config, > > + .enable = mxc_imx93_gasket_enable, > > + .disable = mxc_imx93_gasket_disable, }; > > + > > +static const struct mxc_isi_plat_data mxc_imx93_data = { > > + .model = MXC_ISI_IMX93, > > + .num_ports = 1, > > + .num_channels = 1, > > + .reg_offset = 0, > > + .ier_reg = &mxc_imx8_isi_ier_v2, > > + .set_thd = &mxc_imx8_isi_thd_v1, > > + .clks = mxc_imx8mn_clks, > > + .num_clks = ARRAY_SIZE(mxc_imx8mn_clks), > > + .buf_active_reverse = true, > > + .has_gasket = true, > > + .gasket_ops = &mxc_imx93_gasket_ops, > > .has_36bit_dma = true, > > }; > > > > @@ -518,6 +627,7 @@ static int mxc_isi_remove(struct platform_device > > *pdev) static const struct of_device_id mxc_isi_of_match[] = { > > { .compatible = "fsl,imx8mn-isi", .data = &mxc_imx8mn_data }, > > { .compatible = "fsl,imx8mp-isi", .data = &mxc_imx8mp_data }, > > + { .compatible = "fsl,imx93-isi", .data = &mxc_imx93_data }, > > { /* sentinel */ }, > > }; > > MODULE_DEVICE_TABLE(of, mxc_isi_of_match); diff --git > > a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h > > b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h > > index e469788a9e6c..c425edb6fbea 100644 > > --- a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h > > +++ b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h > > @@ -18,6 +18,7 @@ > > > > #include <media/media-device.h> > > #include <media/media-entity.h> > > +#include <media/mipi-csi2.h> > > #include <media/v4l2-async.h> > > #include <media/v4l2-ctrls.h> > > #include <media/v4l2-dev.h> > > @@ -59,6 +60,27 @@ struct v4l2_m2m_dev; > > #define MXC_ISI_M2M "mxc-isi-m2m" > > #define MXC_MAX_PLANES 3 > > > > +/* GASKET (i.MX8MN and i.MX8MP only) */ > > +#define GASKET_BASE(n) (0x0060 + (n) * > 0x30) > > + > > +#define GASKET_CTRL 0x0000 > > +#define GASKET_CTRL_DATA_TYPE(dt) ((dt) << 8) > > +#define GASKET_CTRL_DATA_TYPE_MASK (0x3f << 8) > > +#define GASKET_CTRL_DUAL_COMP_ENABLE BIT(1) > > +#define GASKET_CTRL_ENABLE BIT(0) > > + > > +#define GASKET_HSIZE 0x0004 > > +#define GASKET_VSIZE 0x0008 > > + > > +/* dispmix_GPR register (i.MX93 only) */ > > +#define DISP_MIX_CAMERA_MUX 0x30 > > +#define DISP_MIX_CAMERA_MUX_DATA_TYPE(x) (((x) & 0x3f) << 3) > > +#define DISP_MIX_CAMERA_MUX_GASKET_ENABLE BIT(16) > > + > > +#define DISP_MIX_CSI_REG 0x48 > > +#define DISP_MIX_CSI_REG_CFGFREQRANGE(x) ((x) & 0x3f) > > +#define DISP_MIX_CSI_REG_HSFREQRANGE(x) (((x) & 0x7f) << 8) > > + > > ^Can you use tabs instead of space here? Done in v3 > > > > struct mxc_isi_dev; > > struct mxc_isi_m2m_ctx; > > > > @@ -147,9 +169,19 @@ struct mxc_isi_set_thd { > > struct mxc_isi_panic_thd panic_set_thd_v; }; > > > > +struct mxc_gasket_ops { > > + int (*enable)(struct mxc_isi_dev *isi, const unsigned int port); > > + int (*config)(struct mxc_isi_dev *isi, > > + const struct v4l2_mbus_frame_desc *fd, > > + const struct v4l2_mbus_framefmt *fmt, > > + const unsigned int port); > > + void (*disable)(struct mxc_isi_dev *isi, const unsigned int > > +port); }; > > + > > enum model { > > MXC_ISI_IMX8MN, > > MXC_ISI_IMX8MP, > > + MXC_ISI_IMX93, > > }; > > > > struct mxc_isi_plat_data { > > @@ -160,6 +192,7 @@ struct mxc_isi_plat_data { > > const struct mxc_isi_ier_reg *ier_reg; > > const struct mxc_isi_set_thd *set_thd; > > const struct clk_bulk_data *clks; > > + const struct mxc_gasket_ops *gasket_ops; > > unsigned int num_clks; > > bool buf_active_reverse; > > bool has_gasket; > > diff --git a/drivers/media/platform/nxp/imx8-isi/imx8-isi-crossbar.c > > b/drivers/media/platform/nxp/imx8-isi/imx8-isi-crossbar.c > > index f7447b2f4d77..855b31e3dade 100644 > > --- a/drivers/media/platform/nxp/imx8-isi/imx8-isi-crossbar.c > > +++ b/drivers/media/platform/nxp/imx8-isi/imx8-isi-crossbar.c > > @@ -25,20 +25,6 @@ static inline struct mxc_isi_crossbar > *to_isi_crossbar(struct v4l2_subdev *sd) > > return container_of(sd, struct mxc_isi_crossbar, sd); } > > > > -/* > > ---------------------------------------------------------------------- > > ------- > > - * Media block control (i.MX8MN and i.MX8MP only) > > - */ > > -#define GASKET_BASE(n) (0x0060 + (n) * > 0x30) > > - > > -#define GASKET_CTRL 0x0000 > > -#define GASKET_CTRL_DATA_TYPE(dt) ((dt) << 8) > > -#define GASKET_CTRL_DATA_TYPE_MASK (0x3f << 8) > > -#define GASKET_CTRL_DUAL_COMP_ENABLE BIT(1) > > -#define GASKET_CTRL_ENABLE BIT(0) > > - > > -#define GASKET_HSIZE 0x0004 > > -#define GASKET_VSIZE 0x0008 > > - > > static int mxc_isi_crossbar_gasket_enable(struct mxc_isi_crossbar *xbar, > > struct v4l2_subdev_state > *state, > > struct v4l2_subdev > *remote_sd, > > @@ -46,13 +32,16 @@ static int mxc_isi_crossbar_gasket_enable(struct > > mxc_isi_crossbar *xbar, { > > struct mxc_isi_dev *isi = xbar->isi; > > const struct v4l2_mbus_framefmt *fmt; > > + const struct mxc_gasket_ops *gasket_ops = NULL; > > struct v4l2_mbus_frame_desc fd; > > - u32 val; > > int ret; > > > > if (!isi->pdata->has_gasket) > > return 0; > > > > + if (isi->pdata->gasket_ops) > > + gasket_ops = isi->pdata->gasket_ops; > > + > > /* > > * Configure and enable the gasket with the frame size and CSI-2 data > > * type. For YUV422 8-bit, enable dual component mode > > unconditionally, @@ -77,16 +66,23 @@ static int > mxc_isi_crossbar_gasket_enable(struct mxc_isi_crossbar *xbar, > > if (!fmt) > > return -EINVAL; > > > > - regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_HSIZE, > fmt->width); > > - regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_VSIZE, > fmt->height); > > - > > - val = GASKET_CTRL_DATA_TYPE(fd.entry[0].bus.csi2.dt) > > - | GASKET_CTRL_ENABLE; > > - > > - if (fd.entry[0].bus.csi2.dt == MIPI_CSI2_DT_YUV422_8B) > > - val |= GASKET_CTRL_DUAL_COMP_ENABLE; > > + if (gasket_ops && gasket_ops->config) { > > + ret = gasket_ops->config(isi, &fd, fmt, port); > > + if (ret) { > > + dev_err(isi->dev, > > + "failed to configure gasket%d\n", port); > > What about keep this print on the same line? Ok, I will update when handle comments in v3 if have. If no, I will send a new version if it's necessary. > > > + return ret; > > + } > > + } > > > > - regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_CTRL, val); > > + if (gasket_ops && gasket_ops->enable) { > > + ret = gasket_ops->enable(isi, port); > > + if (ret) { > > + dev_err(isi->dev, > > + "failed to enable gasket%d\n", port); > > Same here :) > > > + return ret; > > + } > > + } > > > > return 0; > > } > > @@ -95,11 +91,16 @@ static void mxc_isi_crossbar_gasket_disable(struct > mxc_isi_crossbar *xbar, > > unsigned int port) { > > struct mxc_isi_dev *isi = xbar->isi; > > + const struct mxc_gasket_ops *gasket_ops = NULL; > > > > if (!isi->pdata->has_gasket) > > return; > > > > - regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_CTRL, 0); > > + if (isi->pdata->gasket_ops) > > + gasket_ops = isi->pdata->gasket_ops; > > + > > + if (gasket_ops && gasket_ops->disable) > > + gasket_ops->disable(isi, port); > > } > > > Thanks & Regards, > Tommaso > > > > > /* ----------------------------------------------------------------------------- > > -- > > 2.37.1 > >
Hi Guoniu, On Tue, Jun 27, 2023 at 08:39:37AM +0000, G.N. Zhou (OSS) wrote: > Hi Tommaso, > > Thanks for your comments. I have updated version 3 and your comments have been handled in the new version patches Thanks for let me know. I'll check v3 :) Regards, Tommaso > > > -----Original Message----- > > From: Tommaso Merciai <tomm.merciai@gmail.com> > > Sent: 2023年6月27日 16:26 > > To: G.N. Zhou (OSS) <guoniu.zhou@oss.nxp.com> > > Cc: linux-media@vger.kernel.org; dl-linux-imx <linux-imx@nxp.com>; > > devicetree@vger.kernel.org; laurent.pinchart@ideasonboard.com; > > mchehab@kernel.org; robh+dt@kernel.org; krzysztof.kozlowski+dt@linaro.org; > > conor+dt@kernel.org; Xavier Roumegue (OSS) > > <xavier.roumegue@oss.nxp.com>; kernel@pengutronix.de; > > jacopo.mondi@ideasonboard.com; sakari.ailus@linux.intel.com > > Subject: Re: [PATCH v2 2/2] media: nxp: imx-isi: add ISI support for i.MX93 > > > > Caution: This is an external email. Please take care when clicking links or opening > > attachments. When in doubt, report the message using the 'Report this email' > > button > > > > > > Hi Guoniu, > > > > On Mon, Jun 26, 2023 at 11:27:35AM +0800, guoniu.zhou@oss.nxp.com wrote: > > > From: "Guoniu.zhou" <guoniu.zhou@nxp.com> > > > > > > Abstract gasket operation and driver should implement them for SoC > > > which support gasket. > > > > > > i.MX93 use a different gasket which has different register definition > > > compared with i.MX8. Hence implement the gasket callbacks in order to > > > add ISI support for i.MX93. > > > > > > Signed-off-by: Guoniu.zhou <guoniu.zhou@nxp.com> > > > --- > > > .../platform/nxp/imx8-isi/imx8-isi-core.c | 110 ++++++++++++++++++ > > > .../platform/nxp/imx8-isi/imx8-isi-core.h | 33 ++++++ > > > .../platform/nxp/imx8-isi/imx8-isi-crossbar.c | 51 ++++---- > > > 3 files changed, 169 insertions(+), 25 deletions(-) > > > > > > diff --git a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c > > > b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c > > > index 253e77189b69..d37145fb7f14 100644 > > > --- a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c > > > +++ b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c > > > @@ -14,6 +14,7 @@ > > > #include <linux/pm.h> > > > #include <linux/pm_runtime.h> > > > #include <linux/property.h> > > > +#include <linux/regmap.h> > > > #include <linux/slab.h> > > > #include <linux/string.h> > > > #include <linux/types.h> > > > @@ -279,6 +280,54 @@ static const struct clk_bulk_data mxc_imx8mn_clks[] > > = { > > > { .id = "apb" }, > > > }; > > > > > > +static int mxc_imx8_gasket_config(struct mxc_isi_dev *isi, > > > + const struct v4l2_mbus_frame_desc *fd, > > > + const struct v4l2_mbus_framefmt *fmt, > > > + const unsigned int port) { > > > + u32 val; > > > + > > > + regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_HSIZE, > > fmt->width); > > > + regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_VSIZE, > > > + fmt->height); > > > + > > > + val = GASKET_CTRL_DATA_TYPE(fd->entry[0].bus.csi2.dt); > > > + if (fd->entry[0].bus.csi2.dt == MIPI_CSI2_DT_YUV422_8B) > > > + val |= GASKET_CTRL_DUAL_COMP_ENABLE; > > > + > > > + regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_CTRL, val); > > > + > > > + dev_dbg(isi->dev, "w/h=(%d, %d), data type=0x%x\n", > > > + fmt->width, fmt->height, > > > + fd->entry[0].bus.csi2.dt); > > > > Receive warning from checkpatch.pl: > > Drop the debug message in v3 > > > > > CHECK: Alignment should match open parenthesis > > #49: FILE: drivers/media/platform/nx > p/imx8-isi/imx8-isi-core.c:300: > > + dev_dbg(isi->dev, "w/h=(%d, %d), data type=0x%x\n", > > + fmt->width, fmt->height, > > > > > + > > > + return 0; > > > +} > > > + > > > +static int mxc_imx8_gasket_enable(struct mxc_isi_dev *isi, > > > + const unsigned int port) { > > > + u32 val; > > > + > > > + regmap_read(isi->gasket, GASKET_BASE(port), &val); > > > + val |= GASKET_CTRL_ENABLE; > > > + > > > + regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_CTRL, val); > > > + > > > + return 0; > > > +} > > > + > > > +static void mxc_imx8_gasket_disable(struct mxc_isi_dev *isi, > > > + const unsigned int port) { > > > + regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_CTRL, 0); } > > > + > > > +static const struct mxc_gasket_ops mxc_imx8_gasket_ops = { > > > + .config = mxc_imx8_gasket_config, > > > + .enable = mxc_imx8_gasket_enable, > > > + .disable = mxc_imx8_gasket_disable, }; > > > + > > > static const struct mxc_isi_plat_data mxc_imx8mn_data = { > > > .model = MXC_ISI_IMX8MN, > > > .num_ports = 1, > > > @@ -290,6 +339,7 @@ static const struct mxc_isi_plat_data > > mxc_imx8mn_data = { > > > .num_clks = ARRAY_SIZE(mxc_imx8mn_clks), > > > .buf_active_reverse = false, > > > .has_gasket = true, > > > + .gasket_ops = &mxc_imx8_gasket_ops, > > > .has_36bit_dma = false, > > > }; > > > > > > @@ -304,6 +354,65 @@ static const struct mxc_isi_plat_data > > mxc_imx8mp_data = { > > > .num_clks = ARRAY_SIZE(mxc_imx8mn_clks), > > > .buf_active_reverse = true, > > > .has_gasket = true, > > > + .gasket_ops = &mxc_imx8_gasket_ops, > > > + .has_36bit_dma = true, > > > +}; > > > + > > > +static int mxc_imx93_gasket_config(struct mxc_isi_dev *isi, > > > + const struct v4l2_mbus_frame_desc > > *fd, > > > + const struct v4l2_mbus_framefmt > > *fmt, > > > + const unsigned int port) { > > > + u32 val; > > > + > > > + val = DISP_MIX_CAMERA_MUX_DATA_TYPE(fd->entry[0].bus.csi2.dt); > > > + regmap_write(isi->gasket, DISP_MIX_CAMERA_MUX, val); > > > + > > > + dev_dbg(isi->dev, "data type=0x%x\n", fd->entry[0].bus.csi2.dt); > > > + > > > + return 0; > > > +} > > > + > > > +static int mxc_imx93_gasket_enable(struct mxc_isi_dev *isi, > > > + const unsigned int port) { > > > + u32 val; > > > + > > > + regmap_read(isi->gasket, DISP_MIX_CAMERA_MUX, &val); > > > + val |= DISP_MIX_CAMERA_MUX_GASKET_ENABLE; > > > + regmap_write(isi->gasket, DISP_MIX_CAMERA_MUX, val); > > > + > > > + return 0; > > > +} > > > + > > > +static void mxc_imx93_gasket_disable(struct mxc_isi_dev *isi, > > > + unsigned int port) { > > > + u32 val; > > > + > > > + regmap_read(isi->gasket, DISP_MIX_CAMERA_MUX, &val); > > > + val &= ~DISP_MIX_CAMERA_MUX_GASKET_ENABLE; > > > + regmap_write(isi->gasket, DISP_MIX_CAMERA_MUX, val); } > > > + > > > +static const struct mxc_gasket_ops mxc_imx93_gasket_ops = { > > > + .config = mxc_imx93_gasket_config, > > > + .enable = mxc_imx93_gasket_enable, > > > + .disable = mxc_imx93_gasket_disable, }; > > > + > > > +static const struct mxc_isi_plat_data mxc_imx93_data = { > > > + .model = MXC_ISI_IMX93, > > > + .num_ports = 1, > > > + .num_channels = 1, > > > + .reg_offset = 0, > > > + .ier_reg = &mxc_imx8_isi_ier_v2, > > > + .set_thd = &mxc_imx8_isi_thd_v1, > > > + .clks = mxc_imx8mn_clks, > > > + .num_clks = ARRAY_SIZE(mxc_imx8mn_clks), > > > + .buf_active_reverse = true, > > > + .has_gasket = true, > > > + .gasket_ops = &mxc_imx93_gasket_ops, > > > .has_36bit_dma = true, > > > }; > > > > > > @@ -518,6 +627,7 @@ static int mxc_isi_remove(struct platform_device > > > *pdev) static const struct of_device_id mxc_isi_of_match[] = { > > > { .compatible = "fsl,imx8mn-isi", .data = &mxc_imx8mn_data }, > > > { .compatible = "fsl,imx8mp-isi", .data = &mxc_imx8mp_data }, > > > + { .compatible = "fsl,imx93-isi", .data = &mxc_imx93_data }, > > > { /* sentinel */ }, > > > }; > > > MODULE_DEVICE_TABLE(of, mxc_isi_of_match); diff --git > > > a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h > > > b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h > > > index e469788a9e6c..c425edb6fbea 100644 > > > --- a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h > > > +++ b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h > > > @@ -18,6 +18,7 @@ > > > > > > #include <media/media-device.h> > > > #include <media/media-entity.h> > > > +#include <media/mipi-csi2.h> > > > #include <media/v4l2-async.h> > > > #include <media/v4l2-ctrls.h> > > > #include <media/v4l2-dev.h> > > > @@ -59,6 +60,27 @@ struct v4l2_m2m_dev; > > > #define MXC_ISI_M2M "mxc-isi-m2m" > > > #define MXC_MAX_PLANES 3 > > > > > > +/* GASKET (i.MX8MN and i.MX8MP only) */ > > > +#define GASKET_BASE(n) (0x0060 + (n) * > > 0x30) > > > + > > > +#define GASKET_CTRL 0x0000 > > > +#define GASKET_CTRL_DATA_TYPE(dt) ((dt) << 8) > > > +#define GASKET_CTRL_DATA_TYPE_MASK (0x3f << 8) > > > +#define GASKET_CTRL_DUAL_COMP_ENABLE BIT(1) > > > +#define GASKET_CTRL_ENABLE BIT(0) > > > + > > > +#define GASKET_HSIZE 0x0004 > > > +#define GASKET_VSIZE 0x0008 > > > + > > > +/* dispmix_GPR register (i.MX93 only) */ > > > +#define DISP_MIX_CAMERA_MUX 0x30 > > > +#define DISP_MIX_CAMERA_MUX_DATA_TYPE(x) (((x) & 0x3f) << 3) > > > +#define DISP_MIX_CAMERA_MUX_GASKET_ENABLE BIT(16) > > > + > > > +#define DISP_MIX_CSI_REG 0x48 > > > +#define DISP_MIX_CSI_REG_CFGFREQRANGE(x) ((x) & 0x3f) > > > +#define DISP_MIX_CSI_REG_HSFREQRANGE(x) (((x) & 0x7f) << 8) > > > + > > > > ^Can you use tabs instead of space here? > > Done in v3 > > > > > > > > struct mxc_isi_dev; > > > struct mxc_isi_m2m_ctx; > > > > > > @@ -147,9 +169,19 @@ struct mxc_isi_set_thd { > > > struct mxc_isi_panic_thd panic_set_thd_v; }; > > > > > > +struct mxc_gasket_ops { > > > + int (*enable)(struct mxc_isi_dev *isi, const unsigned int port); > > > + int (*config)(struct mxc_isi_dev *isi, > > > + const struct v4l2_mbus_frame_desc *fd, > > > + const struct v4l2_mbus_framefmt *fmt, > > > + const unsigned int port); > > > + void (*disable)(struct mxc_isi_dev *isi, const unsigned int > > > +port); }; > > > + > > > enum model { > > > MXC_ISI_IMX8MN, > > > MXC_ISI_IMX8MP, > > > + MXC_ISI_IMX93, > > > }; > > > > > > struct mxc_isi_plat_data { > > > @@ -160,6 +192,7 @@ struct mxc_isi_plat_data { > > > const struct mxc_isi_ier_reg *ier_reg; > > > const struct mxc_isi_set_thd *set_thd; > > > const struct clk_bulk_data *clks; > > > + const struct mxc_gasket_ops *gasket_ops; > > > unsigned int num_clks; > > > bool buf_active_reverse; > > > bool has_gasket; > > > diff --git a/drivers/media/platform/nxp/imx8-isi/imx8-isi-crossbar.c > > > b/drivers/media/platform/nxp/imx8-isi/imx8-isi-crossbar.c > > > index f7447b2f4d77..855b31e3dade 100644 > > > --- a/drivers/media/platform/nxp/imx8-isi/imx8-isi-crossbar.c > > > +++ b/drivers/media/platform/nxp/imx8-isi/imx8-isi-crossbar.c > > > @@ -25,20 +25,6 @@ static inline struct mxc_isi_crossbar > > *to_isi_crossbar(struct v4l2_subdev *sd) > > > return container_of(sd, struct mxc_isi_crossbar, sd); } > > > > > > -/* > > > ---------------------------------------------------------------------- > > > ------- > > > - * Media block control (i.MX8MN and i.MX8MP only) > > > - */ > > > -#define GASKET_BASE(n) (0x0060 + (n) * > > 0x30) > > > - > > > -#define GASKET_CTRL 0x0000 > > > -#define GASKET_CTRL_DATA_TYPE(dt) ((dt) << 8) > > > -#define GASKET_CTRL_DATA_TYPE_MASK (0x3f << 8) > > > -#define GASKET_CTRL_DUAL_COMP_ENABLE BIT(1) > > > -#define GASKET_CTRL_ENABLE BIT(0) > > > - > > > -#define GASKET_HSIZE 0x0004 > > > -#define GASKET_VSIZE 0x0008 > > > - > > > static int mxc_isi_crossbar_gasket_enable(struct mxc_isi_crossbar *xbar, > > > struct v4l2_subdev_state > > *state, > > > struct v4l2_subdev > > *remote_sd, > > > @@ -46,13 +32,16 @@ static int mxc_isi_crossbar_gasket_enable(struct > > > mxc_isi_crossbar *xbar, { > > > struct mxc_isi_dev *isi = xbar->isi; > > > const struct v4l2_mbus_framefmt *fmt; > > > + const struct mxc_gasket_ops *gasket_ops = NULL; > > > struct v4l2_mbus_frame_desc fd; > > > - u32 val; > > > int ret; > > > > > > if (!isi->pdata->has_gasket) > > > return 0; > > > > > > + if (isi->pdata->gasket_ops) > > > + gasket_ops = isi->pdata->gasket_ops; > > > + > > > /* > > > * Configure and enable the gasket with the frame size and CSI-2 data > > > * type. For YUV422 8-bit, enable dual component mode > > > unconditionally, @@ -77,16 +66,23 @@ static int > > mxc_isi_crossbar_gasket_enable(struct mxc_isi_crossbar *xbar, > > > if (!fmt) > > > return -EINVAL; > > > > > > - regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_HSIZE, > > fmt->width); > > > - regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_VSIZE, > > fmt->height); > > > - > > > - val = GASKET_CTRL_DATA_TYPE(fd.entry[0].bus.csi2.dt) > > > - | GASKET_CTRL_ENABLE; > > > - > > > - if (fd.entry[0].bus.csi2.dt == MIPI_CSI2_DT_YUV422_8B) > > > - val |= GASKET_CTRL_DUAL_COMP_ENABLE; > > > + if (gasket_ops && gasket_ops->config) { > > > + ret = gasket_ops->config(isi, &fd, fmt, port); > > > + if (ret) { > > > + dev_err(isi->dev, > > > + "failed to configure gasket%d\n", port); > > > > What about keep this print on the same line? > > Ok, I will update when handle comments in v3 if have. If no, I will send a new version if it's necessary. > > > > > > + return ret; > > > + } > > > + } > > > > > > - regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_CTRL, val); > > > + if (gasket_ops && gasket_ops->enable) { > > > + ret = gasket_ops->enable(isi, port); > > > + if (ret) { > > > + dev_err(isi->dev, > > > + "failed to enable gasket%d\n", port); > > > > Same here :) > > > > > + return ret; > > > + } > > > + } > > > > > > return 0; > > > } > > > @@ -95,11 +91,16 @@ static void mxc_isi_crossbar_gasket_disable(struct > > mxc_isi_crossbar *xbar, > > > unsigned int port) { > > > struct mxc_isi_dev *isi = xbar->isi; > > > + const struct mxc_gasket_ops *gasket_ops = NULL; > > > > > > if (!isi->pdata->has_gasket) > > > return; > > > > > > - regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_CTRL, 0); > > > + if (isi->pdata->gasket_ops) > > > + gasket_ops = isi->pdata->gasket_ops; > > > + > > > + if (gasket_ops && gasket_ops->disable) > > > + gasket_ops->disable(isi, port); > > > } > > > > > > Thanks & Regards, > > Tommaso > > > > > > > > /* ----------------------------------------------------------------------------- > > > -- > > > 2.37.1 > > >
diff --git a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c index 253e77189b69..d37145fb7f14 100644 --- a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c +++ b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c @@ -14,6 +14,7 @@ #include <linux/pm.h> #include <linux/pm_runtime.h> #include <linux/property.h> +#include <linux/regmap.h> #include <linux/slab.h> #include <linux/string.h> #include <linux/types.h> @@ -279,6 +280,54 @@ static const struct clk_bulk_data mxc_imx8mn_clks[] = { { .id = "apb" }, }; +static int mxc_imx8_gasket_config(struct mxc_isi_dev *isi, + const struct v4l2_mbus_frame_desc *fd, + const struct v4l2_mbus_framefmt *fmt, + const unsigned int port) +{ + u32 val; + + regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_HSIZE, fmt->width); + regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_VSIZE, fmt->height); + + val = GASKET_CTRL_DATA_TYPE(fd->entry[0].bus.csi2.dt); + if (fd->entry[0].bus.csi2.dt == MIPI_CSI2_DT_YUV422_8B) + val |= GASKET_CTRL_DUAL_COMP_ENABLE; + + regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_CTRL, val); + + dev_dbg(isi->dev, "w/h=(%d, %d), data type=0x%x\n", + fmt->width, fmt->height, + fd->entry[0].bus.csi2.dt); + + return 0; +} + +static int mxc_imx8_gasket_enable(struct mxc_isi_dev *isi, + const unsigned int port) +{ + u32 val; + + regmap_read(isi->gasket, GASKET_BASE(port), &val); + val |= GASKET_CTRL_ENABLE; + + regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_CTRL, val); + + return 0; +} + +static void mxc_imx8_gasket_disable(struct mxc_isi_dev *isi, + const unsigned int port) +{ + regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_CTRL, 0); +} + +static const struct mxc_gasket_ops mxc_imx8_gasket_ops = { + .config = mxc_imx8_gasket_config, + .enable = mxc_imx8_gasket_enable, + .disable = mxc_imx8_gasket_disable, +}; + static const struct mxc_isi_plat_data mxc_imx8mn_data = { .model = MXC_ISI_IMX8MN, .num_ports = 1, @@ -290,6 +339,7 @@ static const struct mxc_isi_plat_data mxc_imx8mn_data = { .num_clks = ARRAY_SIZE(mxc_imx8mn_clks), .buf_active_reverse = false, .has_gasket = true, + .gasket_ops = &mxc_imx8_gasket_ops, .has_36bit_dma = false, }; @@ -304,6 +354,65 @@ static const struct mxc_isi_plat_data mxc_imx8mp_data = { .num_clks = ARRAY_SIZE(mxc_imx8mn_clks), .buf_active_reverse = true, .has_gasket = true, + .gasket_ops = &mxc_imx8_gasket_ops, + .has_36bit_dma = true, +}; + +static int mxc_imx93_gasket_config(struct mxc_isi_dev *isi, + const struct v4l2_mbus_frame_desc *fd, + const struct v4l2_mbus_framefmt *fmt, + const unsigned int port) +{ + u32 val; + + val = DISP_MIX_CAMERA_MUX_DATA_TYPE(fd->entry[0].bus.csi2.dt); + regmap_write(isi->gasket, DISP_MIX_CAMERA_MUX, val); + + dev_dbg(isi->dev, "data type=0x%x\n", fd->entry[0].bus.csi2.dt); + + return 0; +} + +static int mxc_imx93_gasket_enable(struct mxc_isi_dev *isi, + const unsigned int port) +{ + u32 val; + + regmap_read(isi->gasket, DISP_MIX_CAMERA_MUX, &val); + val |= DISP_MIX_CAMERA_MUX_GASKET_ENABLE; + regmap_write(isi->gasket, DISP_MIX_CAMERA_MUX, val); + + return 0; +} + +static void mxc_imx93_gasket_disable(struct mxc_isi_dev *isi, + unsigned int port) +{ + u32 val; + + regmap_read(isi->gasket, DISP_MIX_CAMERA_MUX, &val); + val &= ~DISP_MIX_CAMERA_MUX_GASKET_ENABLE; + regmap_write(isi->gasket, DISP_MIX_CAMERA_MUX, val); +} + +static const struct mxc_gasket_ops mxc_imx93_gasket_ops = { + .config = mxc_imx93_gasket_config, + .enable = mxc_imx93_gasket_enable, + .disable = mxc_imx93_gasket_disable, +}; + +static const struct mxc_isi_plat_data mxc_imx93_data = { + .model = MXC_ISI_IMX93, + .num_ports = 1, + .num_channels = 1, + .reg_offset = 0, + .ier_reg = &mxc_imx8_isi_ier_v2, + .set_thd = &mxc_imx8_isi_thd_v1, + .clks = mxc_imx8mn_clks, + .num_clks = ARRAY_SIZE(mxc_imx8mn_clks), + .buf_active_reverse = true, + .has_gasket = true, + .gasket_ops = &mxc_imx93_gasket_ops, .has_36bit_dma = true, }; @@ -518,6 +627,7 @@ static int mxc_isi_remove(struct platform_device *pdev) static const struct of_device_id mxc_isi_of_match[] = { { .compatible = "fsl,imx8mn-isi", .data = &mxc_imx8mn_data }, { .compatible = "fsl,imx8mp-isi", .data = &mxc_imx8mp_data }, + { .compatible = "fsl,imx93-isi", .data = &mxc_imx93_data }, { /* sentinel */ }, }; MODULE_DEVICE_TABLE(of, mxc_isi_of_match); diff --git a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h index e469788a9e6c..c425edb6fbea 100644 --- a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h +++ b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h @@ -18,6 +18,7 @@ #include <media/media-device.h> #include <media/media-entity.h> +#include <media/mipi-csi2.h> #include <media/v4l2-async.h> #include <media/v4l2-ctrls.h> #include <media/v4l2-dev.h> @@ -59,6 +60,27 @@ struct v4l2_m2m_dev; #define MXC_ISI_M2M "mxc-isi-m2m" #define MXC_MAX_PLANES 3 +/* GASKET (i.MX8MN and i.MX8MP only) */ +#define GASKET_BASE(n) (0x0060 + (n) * 0x30) + +#define GASKET_CTRL 0x0000 +#define GASKET_CTRL_DATA_TYPE(dt) ((dt) << 8) +#define GASKET_CTRL_DATA_TYPE_MASK (0x3f << 8) +#define GASKET_CTRL_DUAL_COMP_ENABLE BIT(1) +#define GASKET_CTRL_ENABLE BIT(0) + +#define GASKET_HSIZE 0x0004 +#define GASKET_VSIZE 0x0008 + +/* dispmix_GPR register (i.MX93 only) */ +#define DISP_MIX_CAMERA_MUX 0x30 +#define DISP_MIX_CAMERA_MUX_DATA_TYPE(x) (((x) & 0x3f) << 3) +#define DISP_MIX_CAMERA_MUX_GASKET_ENABLE BIT(16) + +#define DISP_MIX_CSI_REG 0x48 +#define DISP_MIX_CSI_REG_CFGFREQRANGE(x) ((x) & 0x3f) +#define DISP_MIX_CSI_REG_HSFREQRANGE(x) (((x) & 0x7f) << 8) + struct mxc_isi_dev; struct mxc_isi_m2m_ctx; @@ -147,9 +169,19 @@ struct mxc_isi_set_thd { struct mxc_isi_panic_thd panic_set_thd_v; }; +struct mxc_gasket_ops { + int (*enable)(struct mxc_isi_dev *isi, const unsigned int port); + int (*config)(struct mxc_isi_dev *isi, + const struct v4l2_mbus_frame_desc *fd, + const struct v4l2_mbus_framefmt *fmt, + const unsigned int port); + void (*disable)(struct mxc_isi_dev *isi, const unsigned int port); +}; + enum model { MXC_ISI_IMX8MN, MXC_ISI_IMX8MP, + MXC_ISI_IMX93, }; struct mxc_isi_plat_data { @@ -160,6 +192,7 @@ struct mxc_isi_plat_data { const struct mxc_isi_ier_reg *ier_reg; const struct mxc_isi_set_thd *set_thd; const struct clk_bulk_data *clks; + const struct mxc_gasket_ops *gasket_ops; unsigned int num_clks; bool buf_active_reverse; bool has_gasket; diff --git a/drivers/media/platform/nxp/imx8-isi/imx8-isi-crossbar.c b/drivers/media/platform/nxp/imx8-isi/imx8-isi-crossbar.c index f7447b2f4d77..855b31e3dade 100644 --- a/drivers/media/platform/nxp/imx8-isi/imx8-isi-crossbar.c +++ b/drivers/media/platform/nxp/imx8-isi/imx8-isi-crossbar.c @@ -25,20 +25,6 @@ static inline struct mxc_isi_crossbar *to_isi_crossbar(struct v4l2_subdev *sd) return container_of(sd, struct mxc_isi_crossbar, sd); } -/* ----------------------------------------------------------------------------- - * Media block control (i.MX8MN and i.MX8MP only) - */ -#define GASKET_BASE(n) (0x0060 + (n) * 0x30) - -#define GASKET_CTRL 0x0000 -#define GASKET_CTRL_DATA_TYPE(dt) ((dt) << 8) -#define GASKET_CTRL_DATA_TYPE_MASK (0x3f << 8) -#define GASKET_CTRL_DUAL_COMP_ENABLE BIT(1) -#define GASKET_CTRL_ENABLE BIT(0) - -#define GASKET_HSIZE 0x0004 -#define GASKET_VSIZE 0x0008 - static int mxc_isi_crossbar_gasket_enable(struct mxc_isi_crossbar *xbar, struct v4l2_subdev_state *state, struct v4l2_subdev *remote_sd, @@ -46,13 +32,16 @@ static int mxc_isi_crossbar_gasket_enable(struct mxc_isi_crossbar *xbar, { struct mxc_isi_dev *isi = xbar->isi; const struct v4l2_mbus_framefmt *fmt; + const struct mxc_gasket_ops *gasket_ops = NULL; struct v4l2_mbus_frame_desc fd; - u32 val; int ret; if (!isi->pdata->has_gasket) return 0; + if (isi->pdata->gasket_ops) + gasket_ops = isi->pdata->gasket_ops; + /* * Configure and enable the gasket with the frame size and CSI-2 data * type. For YUV422 8-bit, enable dual component mode unconditionally, @@ -77,16 +66,23 @@ static int mxc_isi_crossbar_gasket_enable(struct mxc_isi_crossbar *xbar, if (!fmt) return -EINVAL; - regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_HSIZE, fmt->width); - regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_VSIZE, fmt->height); - - val = GASKET_CTRL_DATA_TYPE(fd.entry[0].bus.csi2.dt) - | GASKET_CTRL_ENABLE; - - if (fd.entry[0].bus.csi2.dt == MIPI_CSI2_DT_YUV422_8B) - val |= GASKET_CTRL_DUAL_COMP_ENABLE; + if (gasket_ops && gasket_ops->config) { + ret = gasket_ops->config(isi, &fd, fmt, port); + if (ret) { + dev_err(isi->dev, + "failed to configure gasket%d\n", port); + return ret; + } + } - regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_CTRL, val); + if (gasket_ops && gasket_ops->enable) { + ret = gasket_ops->enable(isi, port); + if (ret) { + dev_err(isi->dev, + "failed to enable gasket%d\n", port); + return ret; + } + } return 0; } @@ -95,11 +91,16 @@ static void mxc_isi_crossbar_gasket_disable(struct mxc_isi_crossbar *xbar, unsigned int port) { struct mxc_isi_dev *isi = xbar->isi; + const struct mxc_gasket_ops *gasket_ops = NULL; if (!isi->pdata->has_gasket) return; - regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_CTRL, 0); + if (isi->pdata->gasket_ops) + gasket_ops = isi->pdata->gasket_ops; + + if (gasket_ops && gasket_ops->disable) + gasket_ops->disable(isi, port); } /* -----------------------------------------------------------------------------