diff mbox series

[v4,2/3] media: dt-bindings: ov2685: convert to dtschema

Message ID 20230129-ov2685-improvements-v4-2-e71985c5c848@z3ntu.xyz (mailing list archive)
State Accepted
Delegated to: Sakari Ailus
Headers
Series Improvements for OmniVision OV2685 |

Commit Message

Luca Weiss March 23, 2023, 5:57 p.m. UTC 
  Convert the text-based dt-bindings to yaml.

Changes from original txt:
* Take wording for various properties from other yaml bindings, this
  removes e.g. volt amount from schema since it isn't really relevant
  and the datasheet is a better source.
* Don't make reset-gpios a required property since it can be tied to
  DOVDD instead.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
 .../devicetree/bindings/media/i2c/ov2685.txt       |  41 ---------
 .../devicetree/bindings/media/i2c/ovti,ov2685.yaml | 101 +++++++++++++++++++++
 MAINTAINERS                                        |   1 +
 3 files changed, 102 insertions(+), 41 deletions(-)

Comments

Sakari Ailus March 31, 2023, 8:39 a.m. UTC | #1 
Hi Luca,

Thanks for the patch.

On Thu, Mar 23, 2023 at 06:57:50PM +0100, Luca Weiss wrote:
> Convert the text-based dt-bindings to yaml.
> 
> Changes from original txt:
> * Take wording for various properties from other yaml bindings, this
>   removes e.g. volt amount from schema since it isn't really relevant
>   and the datasheet is a better source.
> * Don't make reset-gpios a required property since it can be tied to
>   DOVDD instead.
> 
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
> ---
>  .../devicetree/bindings/media/i2c/ov2685.txt       |  41 ---------
>  .../devicetree/bindings/media/i2c/ovti,ov2685.yaml | 101 +++++++++++++++++++++
>  MAINTAINERS                                        |   1 +
>  3 files changed, 102 insertions(+), 41 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/media/i2c/ov2685.txt b/Documentation/devicetree/bindings/media/i2c/ov2685.txt
> deleted file mode 100644
> index 625c4a8c0d53d..0000000000000
> --- a/Documentation/devicetree/bindings/media/i2c/ov2685.txt
> +++ /dev/null
> @@ -1,41 +0,0 @@
> -* Omnivision OV2685 MIPI CSI-2 sensor
> -
> -Required Properties:
> -- compatible: shall be "ovti,ov2685"
> -- clocks: reference to the xvclk input clock
> -- clock-names: shall be "xvclk"
> -- avdd-supply: Analog voltage supply, 2.8 volts
> -- dovdd-supply: Digital I/O voltage supply, 1.8 volts
> -- dvdd-supply: Digital core voltage supply, 1.8 volts
> -- reset-gpios: Low active reset gpio
> -
> -The device node shall contain one 'port' child node with an
> -'endpoint' subnode for its digital output video port,
> -in accordance with the video interface bindings defined in
> -Documentation/devicetree/bindings/media/video-interfaces.txt.
> -The endpoint optional property 'data-lanes' shall be "<1>".
> -
> -Example:
> -&i2c7 {
> -	ov2685: camera-sensor@3c {
> -		compatible = "ovti,ov2685";
> -		reg = <0x3c>;
> -		pinctrl-names = "default";
> -		pinctrl-0 = <&clk_24m_cam>;
> -
> -		clocks = <&cru SCLK_TESTCLKOUT1>;
> -		clock-names = "xvclk";
> -
> -		avdd-supply = <&pp2800_cam>;
> -		dovdd-supply = <&pp1800>;
> -		dvdd-supply = <&pp1800>;
> -		reset-gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
> -
> -		port {
> -			ucam_out: endpoint {
> -				remote-endpoint = <&mipi_in_ucam>;
> -				data-lanes = <1>;
> -			};
> -		};
> -	};
> -};
> diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov2685.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov2685.yaml
> new file mode 100644
> index 0000000000000..2ac0ca8a0413b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov2685.yaml
> @@ -0,0 +1,101 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/i2c/ovti,ov2685.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: OmniVision OV2685 Image Sensor
> +
> +maintainers:
> +  - Shunqian Zheng <zhengsq@rock-chips.com>
> +
> +properties:
> +  compatible:
> +    const: ovti,ov2685
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    items:
> +      - description: XVCLK clock
> +
> +  clock-names:
> +    items:
> +      - const: xvclk
> +
> +  dvdd-supply:
> +    description: Digital Domain Power Supply
> +
> +  avdd-supply:
> +    description: Analog Domain Power Supply
> +
> +  dovdd-supply:
> +    description: I/O Domain Power Supply
> +
> +  reset-gpios:
> +    maxItems: 1
> +    description: Reset Pin GPIO Control (active low)
> +
> +  port:
> +    description: MIPI CSI-2 transmitter port
> +    $ref: /schemas/graph.yaml#/$defs/port-base
> +    additionalProperties: false
> +
> +    properties:
> +      endpoint:
> +        $ref: /schemas/media/video-interfaces.yaml#
> +        unevaluatedProperties: false
> +
> +        properties:
> +          data-lanes:
> +            maxItems: 1

This should be 2 --- the sensor supports two lanes (even if the driver
doesn't).

I can address this when applying if that's ok.

> +
> +        required:
> +          - data-lanes
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +  - dvdd-supply
> +  - avdd-supply
> +  - dovdd-supply
> +  - port
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/rk3399-cru.h>
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        ov2685: camera-sensor@3c {
> +            compatible = "ovti,ov2685";
> +            reg = <0x3c>;
> +            pinctrl-names = "default";
> +            pinctrl-0 = <&clk_24m_cam>;
> +
> +            clocks = <&cru SCLK_TESTCLKOUT1>;
> +            clock-names = "xvclk";
> +
> +            avdd-supply = <&pp2800_cam>;
> +            dovdd-supply = <&pp1800>;
> +            dvdd-supply = <&pp1800>;
> +            reset-gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
> +
> +            port {
> +                ucam_out: endpoint {
> +                    remote-endpoint = <&mipi_in_ucam>;
> +                    data-lanes = <1>;
> +                };
> +            };
> +        };
> +    };
> +
> +...
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 8ea325040f355..5904f47756fe1 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -15410,6 +15410,7 @@ M:	Shunqian Zheng <zhengsq@rock-chips.com>
>  L:	linux-media@vger.kernel.org
>  S:	Maintained
>  T:	git git://linuxtv.org/media_tree.git
> +F:	Documentation/devicetree/bindings/media/i2c/ovti,ov2685.yaml
>  F:	drivers/media/i2c/ov2685.c
>  
>  OMNIVISION OV2740 SENSOR DRIVER
>
Luca Weiss March 31, 2023, 9:18 a.m. UTC | #2 
Hi Sakari,

Sakari Ailus <sakari.ailus@iki.fi> schreef op 31 maart 2023 10:39:16 CEST:
>Hi Luca,
>
>Thanks for the patch.
>
>On Thu, Mar 23, 2023 at 06:57:50PM +0100, Luca Weiss wrote:
>> Convert the text-based dt-bindings to yaml.
>> 
>> Changes from original txt:
>> * Take wording for various properties from other yaml bindings, this
>>   removes e.g. volt amount from schema since it isn't really relevant
>>   and the datasheet is a better source.
>> * Don't make reset-gpios a required property since it can be tied to
>>   DOVDD instead.
>> 
>> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
>> ---
>>  .../devicetree/bindings/media/i2c/ov2685.txt       |  41 ---------
>>  .../devicetree/bindings/media/i2c/ovti,ov2685.yaml | 101 +++++++++++++++++++++
>>  MAINTAINERS                                        |   1 +
>>  3 files changed, 102 insertions(+), 41 deletions(-)
>> 
>> diff --git a/Documentation/devicetree/bindings/media/i2c/ov2685.txt b/Documentation/devicetree/bindings/media/i2c/ov2685.txt
>> deleted file mode 100644
>> index 625c4a8c0d53d..0000000000000
>> --- a/Documentation/devicetree/bindings/media/i2c/ov2685.txt
>> +++ /dev/null
>> @@ -1,41 +0,0 @@
>> -* Omnivision OV2685 MIPI CSI-2 sensor
>> -
>> -Required Properties:
>> -- compatible: shall be "ovti,ov2685"
>> -- clocks: reference to the xvclk input clock
>> -- clock-names: shall be "xvclk"
>> -- avdd-supply: Analog voltage supply, 2.8 volts
>> -- dovdd-supply: Digital I/O voltage supply, 1.8 volts
>> -- dvdd-supply: Digital core voltage supply, 1.8 volts
>> -- reset-gpios: Low active reset gpio
>> -
>> -The device node shall contain one 'port' child node with an
>> -'endpoint' subnode for its digital output video port,
>> -in accordance with the video interface bindings defined in
>> -Documentation/devicetree/bindings/media/video-interfaces.txt.
>> -The endpoint optional property 'data-lanes' shall be "<1>".
>> -
>> -Example:
>> -&i2c7 {
>> -	ov2685: camera-sensor@3c {
>> -		compatible = "ovti,ov2685";
>> -		reg = <0x3c>;
>> -		pinctrl-names = "default";
>> -		pinctrl-0 = <&clk_24m_cam>;
>> -
>> -		clocks = <&cru SCLK_TESTCLKOUT1>;
>> -		clock-names = "xvclk";
>> -
>> -		avdd-supply = <&pp2800_cam>;
>> -		dovdd-supply = <&pp1800>;
>> -		dvdd-supply = <&pp1800>;
>> -		reset-gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
>> -
>> -		port {
>> -			ucam_out: endpoint {
>> -				remote-endpoint = <&mipi_in_ucam>;
>> -				data-lanes = <1>;
>> -			};
>> -		};
>> -	};
>> -};
>> diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov2685.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov2685.yaml
>> new file mode 100644
>> index 0000000000000..2ac0ca8a0413b
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov2685.yaml
>> @@ -0,0 +1,101 @@
>> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/media/i2c/ovti,ov2685.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: OmniVision OV2685 Image Sensor
>> +
>> +maintainers:
>> +  - Shunqian Zheng <zhengsq@rock-chips.com>
>> +
>> +properties:
>> +  compatible:
>> +    const: ovti,ov2685
>> +
>> +  reg:
>> +    maxItems: 1
>> +
>> +  clocks:
>> +    items:
>> +      - description: XVCLK clock
>> +
>> +  clock-names:
>> +    items:
>> +      - const: xvclk
>> +
>> +  dvdd-supply:
>> +    description: Digital Domain Power Supply
>> +
>> +  avdd-supply:
>> +    description: Analog Domain Power Supply
>> +
>> +  dovdd-supply:
>> +    description: I/O Domain Power Supply
>> +
>> +  reset-gpios:
>> +    maxItems: 1
>> +    description: Reset Pin GPIO Control (active low)
>> +
>> +  port:
>> +    description: MIPI CSI-2 transmitter port
>> +    $ref: /schemas/graph.yaml#/$defs/port-base
>> +    additionalProperties: false
>> +
>> +    properties:
>> +      endpoint:
>> +        $ref: /schemas/media/video-interfaces.yaml#
>> +        unevaluatedProperties: false
>> +
>> +        properties:
>> +          data-lanes:
>> +            maxItems: 1
>
>This should be 2 --- the sensor supports two lanes (even if the driver
>doesn't).

Right, for some reason the product brief mentions that it features "a single-lane MIPI interface" but the datasheet I have writes that it has a 2-lane MIPI serial output, so I guess it does support two lanes?

>
>I can address this when applying if that's ok.

That would be nice, thanks!

Regards
Luca

>
>> +
>> +        required:
>> +          - data-lanes
>> +
>> +required:
>> +  - compatible
>> +  - reg
>> +  - clocks
>> +  - clock-names
>> +  - dvdd-supply
>> +  - avdd-supply
>> +  - dovdd-supply
>> +  - port
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> +  - |
>> +    #include <dt-bindings/clock/rk3399-cru.h>
>> +    #include <dt-bindings/gpio/gpio.h>
>> +
>> +    i2c {
>> +        #address-cells = <1>;
>> +        #size-cells = <0>;
>> +
>> +        ov2685: camera-sensor@3c {
>> +            compatible = "ovti,ov2685";
>> +            reg = <0x3c>;
>> +            pinctrl-names = "default";
>> +            pinctrl-0 = <&clk_24m_cam>;
>> +
>> +            clocks = <&cru SCLK_TESTCLKOUT1>;
>> +            clock-names = "xvclk";
>> +
>> +            avdd-supply = <&pp2800_cam>;
>> +            dovdd-supply = <&pp1800>;
>> +            dvdd-supply = <&pp1800>;
>> +            reset-gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
>> +
>> +            port {
>> +                ucam_out: endpoint {
>> +                    remote-endpoint = <&mipi_in_ucam>;
>> +                    data-lanes = <1>;
>> +                };
>> +            };
>> +        };
>> +    };
>> +
>> +...
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index 8ea325040f355..5904f47756fe1 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -15410,6 +15410,7 @@ M:	Shunqian Zheng <zhengsq@rock-chips.com>
>>  L:	linux-media@vger.kernel.org
>>  S:	Maintained
>>  T:	git git://linuxtv.org/media_tree.git
>> +F:	Documentation/devicetree/bindings/media/i2c/ovti,ov2685.yaml
>>  F:	drivers/media/i2c/ov2685.c
>>  
>>  OMNIVISION OV2740 SENSOR DRIVER
>> 
>
Sakari Ailus March 31, 2023, 9:39 a.m. UTC | #3 
Hi Luca,

On Fri, Mar 31, 2023 at 11:18:29AM +0200, Luca Weiss wrote:
> >> +        properties:
> >> +          data-lanes:
> >> +            maxItems: 1
> >
> >This should be 2 --- the sensor supports two lanes (even if the driver
> >doesn't).
> 
> Right, for some reason the product brief mentions that it features "a
> single-lane MIPI interface" but the datasheet I have writes that it has a
> 2-lane MIPI serial output, so I guess it does support two lanes?

I suppose the datasheet is right. Well, if someone proves otherwise, we can
always change this.

> 
> >
> >I can address this when applying if that's ok.
> 
> That would be nice, thanks!

Done, thanks!
Rob Herring April 18, 2023, 11:54 p.m. UTC | #4 
On Thu, Mar 23, 2023 at 12:58 PM Luca Weiss <luca@z3ntu.xyz> wrote:
>
> Convert the text-based dt-bindings to yaml.
>
> Changes from original txt:
> * Take wording for various properties from other yaml bindings, this
>   removes e.g. volt amount from schema since it isn't really relevant
>   and the datasheet is a better source.
> * Don't make reset-gpios a required property since it can be tied to
>   DOVDD instead.
>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
> ---
>  .../devicetree/bindings/media/i2c/ov2685.txt       |  41 ---------
>  .../devicetree/bindings/media/i2c/ovti,ov2685.yaml | 101 +++++++++++++++++++++
>  MAINTAINERS                                        |   1 +
>  3 files changed, 102 insertions(+), 41 deletions(-)

Now warning in linux-next:

/builds/robherring/linux-dt/Documentation/devicetree/bindings/media/rockchip-isp1.example.dtb:
camera@3c: port:endpoint:data-lanes: [[1]] is too short
        From schema:
/builds/robherring/linux-dt/Documentation/devicetree/bindings/media/i2c/ovti,ov2685.yaml
/builds/robherring/linux-dt/Documentation/devicetree/bindings/media/i2c/ovti,ov2685.example.dtb:
camera-sensor@3c: port:endpoint:data-lanes: [[1]] is too short
        From schema:
/builds/robherring/linux-dt/Documentation/devicetree/bindings/media/i2c/ovti,ov2685.yaml
Luca Weiss April 19, 2023, 3:54 p.m. UTC | #5 
On Mittwoch, 19. April 2023 01:54:18 CEST Rob Herring wrote:
> On Thu, Mar 23, 2023 at 12:58 PM Luca Weiss <luca@z3ntu.xyz> wrote:
> > Convert the text-based dt-bindings to yaml.
> > 
> > Changes from original txt:
> > * Take wording for various properties from other yaml bindings, this
> > 
> >   removes e.g. volt amount from schema since it isn't really relevant
> >   and the datasheet is a better source.
> > 
> > * Don't make reset-gpios a required property since it can be tied to
> > 
> >   DOVDD instead.
> > 
> > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> > Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
> > ---
> > 
> >  .../devicetree/bindings/media/i2c/ov2685.txt       |  41 ---------
> >  .../devicetree/bindings/media/i2c/ovti,ov2685.yaml | 101
> >  +++++++++++++++++++++ MAINTAINERS                                       
> >  |   1 +
> >  3 files changed, 102 insertions(+), 41 deletions(-)
> 
> Now warning in linux-next:
> 
> /builds/robherring/linux-dt/Documentation/devicetree/bindings/media/rockchip
> -isp1.example.dtb: camera@3c: port:endpoint:data-lanes: [[1]] is too short
>         From schema:
> /builds/robherring/linux-dt/Documentation/devicetree/bindings/media/i2c/ovti
> ,ov2685.yaml
> /builds/robherring/linux-dt/Documentation/devicetree/bindings/media/i2c/ovt
> i,ov2685.example.dtb: camera-sensor@3c: port:endpoint:data-lanes: [[1]] is
> too short
>         From schema:
> /builds/robherring/linux-dt/Documentation/devicetree/bindings/media/i2c/ovti
> ,ov2685.yaml

Right, since Sakari changed maxItems=1 to maxItems=2, now minItems is also 2 
but it should be 1. I'll send a patch to fix this.

Regards
Luca
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/media/i2c/ov2685.txt b/Documentation/devicetree/bindings/media/i2c/ov2685.txt
deleted file mode 100644
index 625c4a8c0d53d..0000000000000
--- a/Documentation/devicetree/bindings/media/i2c/ov2685.txt
+++ /dev/null
@@ -1,41 +0,0 @@ 
-* Omnivision OV2685 MIPI CSI-2 sensor
-
-Required Properties:
-- compatible: shall be "ovti,ov2685"
-- clocks: reference to the xvclk input clock
-- clock-names: shall be "xvclk"
-- avdd-supply: Analog voltage supply, 2.8 volts
-- dovdd-supply: Digital I/O voltage supply, 1.8 volts
-- dvdd-supply: Digital core voltage supply, 1.8 volts
-- reset-gpios: Low active reset gpio
-
-The device node shall contain one 'port' child node with an
-'endpoint' subnode for its digital output video port,
-in accordance with the video interface bindings defined in
-Documentation/devicetree/bindings/media/video-interfaces.txt.
-The endpoint optional property 'data-lanes' shall be "<1>".
-
-Example:
-&i2c7 {
-	ov2685: camera-sensor@3c {
-		compatible = "ovti,ov2685";
-		reg = <0x3c>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&clk_24m_cam>;
-
-		clocks = <&cru SCLK_TESTCLKOUT1>;
-		clock-names = "xvclk";
-
-		avdd-supply = <&pp2800_cam>;
-		dovdd-supply = <&pp1800>;
-		dvdd-supply = <&pp1800>;
-		reset-gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
-
-		port {
-			ucam_out: endpoint {
-				remote-endpoint = <&mipi_in_ucam>;
-				data-lanes = <1>;
-			};
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov2685.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov2685.yaml
new file mode 100644
index 0000000000000..2ac0ca8a0413b
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov2685.yaml
@@ -0,0 +1,101 @@ 
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov2685.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OmniVision OV2685 Image Sensor
+
+maintainers:
+  - Shunqian Zheng <zhengsq@rock-chips.com>
+
+properties:
+  compatible:
+    const: ovti,ov2685
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: XVCLK clock
+
+  clock-names:
+    items:
+      - const: xvclk
+
+  dvdd-supply:
+    description: Digital Domain Power Supply
+
+  avdd-supply:
+    description: Analog Domain Power Supply
+
+  dovdd-supply:
+    description: I/O Domain Power Supply
+
+  reset-gpios:
+    maxItems: 1
+    description: Reset Pin GPIO Control (active low)
+
+  port:
+    description: MIPI CSI-2 transmitter port
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            maxItems: 1
+
+        required:
+          - data-lanes
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - dvdd-supply
+  - avdd-supply
+  - dovdd-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3399-cru.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ov2685: camera-sensor@3c {
+            compatible = "ovti,ov2685";
+            reg = <0x3c>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&clk_24m_cam>;
+
+            clocks = <&cru SCLK_TESTCLKOUT1>;
+            clock-names = "xvclk";
+
+            avdd-supply = <&pp2800_cam>;
+            dovdd-supply = <&pp1800>;
+            dvdd-supply = <&pp1800>;
+            reset-gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+
+            port {
+                ucam_out: endpoint {
+                    remote-endpoint = <&mipi_in_ucam>;
+                    data-lanes = <1>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index 8ea325040f355..5904f47756fe1 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -15410,6 +15410,7 @@  M:	Shunqian Zheng <zhengsq@rock-chips.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 T:	git git://linuxtv.org/media_tree.git
+F:	Documentation/devicetree/bindings/media/i2c/ovti,ov2685.yaml
 F:	drivers/media/i2c/ov2685.c
 
 OMNIVISION OV2740 SENSOR DRIVER