@@ -380,6 +380,131 @@ static void ov2680_fill_format(struct ov2680_device *sensor,
ov2680_set_bayer_order(sensor, fmt);
}
+static void ov2680_calc_mode(struct ov2680_device *sensor, int width, int height)
+{
+ int orig_width = width;
+ int orig_height = height;
+
+ if (width <= (OV2680_NATIVE_WIDTH / 2) &&
+ height <= (OV2680_NATIVE_HEIGHT / 2)) {
+ sensor->mode.binning = true;
+ width *= 2;
+ height *= 2;
+ } else {
+ sensor->mode.binning = false;
+ }
+
+ sensor->mode.h_start = ((OV2680_NATIVE_WIDTH - width) / 2) & ~1;
+ sensor->mode.v_start = ((OV2680_NATIVE_HEIGHT - height) / 2) & ~1;
+ sensor->mode.h_end = min(sensor->mode.h_start + width + OV2680_END_MARGIN - 1,
+ OV2680_NATIVE_WIDTH - 1);
+ sensor->mode.v_end = min(sensor->mode.v_start + height + OV2680_END_MARGIN - 1,
+ OV2680_NATIVE_HEIGHT - 1);
+ sensor->mode.h_output_size = orig_width;
+ sensor->mode.v_output_size = orig_height;
+ sensor->mode.hts = OV2680_PIXELS_PER_LINE;
+ sensor->mode.vts = OV2680_LINES_PER_FRAME;
+}
+
+static int ov2680_set_mode(struct ov2680_device *sensor, int width, int height)
+{
+ struct i2c_client *client = sensor->client;
+ u8 pll_div, unknown, inc, fmt1, fmt2;
+ int ret;
+
+ ov2680_calc_mode(sensor, width, height);
+
+ if (sensor->mode.binning) {
+ pll_div = 1;
+ unknown = 0x23;
+ inc = 0x31;
+ fmt1 = 0xc2;
+ fmt2 = 0x01;
+ } else {
+ pll_div = 0;
+ unknown = 0x21;
+ inc = 0x11;
+ fmt1 = 0xc0;
+ fmt2 = 0x00;
+ }
+
+ ret = ovxxxx_write_reg8(client, 0x3086, pll_div);
+ if (ret)
+ return ret;
+
+ ret = ovxxxx_write_reg8(client, 0x370a, unknown);
+ if (ret)
+ return ret;
+
+ ret = ovxxxx_write_reg16(client, OV2680_HORIZONTAL_START_H, sensor->mode.h_start);
+ if (ret)
+ return ret;
+
+ ret = ovxxxx_write_reg16(client, OV2680_VERTICAL_START_H, sensor->mode.v_start);
+ if (ret)
+ return ret;
+
+ ret = ovxxxx_write_reg16(client, OV2680_HORIZONTAL_END_H, sensor->mode.h_end);
+ if (ret)
+ return ret;
+
+ ret = ovxxxx_write_reg16(client, OV2680_VERTICAL_END_H, sensor->mode.v_end);
+ if (ret)
+ return ret;
+
+ ret = ovxxxx_write_reg16(client, OV2680_HORIZONTAL_OUTPUT_SIZE_H,
+ sensor->mode.h_output_size);
+ if (ret)
+ return ret;
+
+ ret = ovxxxx_write_reg16(client, OV2680_VERTICAL_OUTPUT_SIZE_H,
+ sensor->mode.v_output_size);
+ if (ret)
+ return ret;
+
+ ret = ovxxxx_write_reg16(client, OV2680_HTS_H, sensor->mode.hts);
+ if (ret)
+ return ret;
+
+ ret = ovxxxx_write_reg16(client, OV2680_VTS_H, sensor->mode.vts);
+ if (ret)
+ return ret;
+
+ ret = ovxxxx_write_reg16(client, OV2680_ISP_X_WIN_H, 0);
+ if (ret)
+ return ret;
+
+ ret = ovxxxx_write_reg16(client, OV2680_ISP_Y_WIN_H, 0);
+ if (ret)
+ return ret;
+
+ ret = ovxxxx_write_reg8(client, OV2680_X_INC, inc);
+ if (ret)
+ return ret;
+
+ ret = ovxxxx_write_reg8(client, OV2680_Y_INC, inc);
+ if (ret)
+ return ret;
+
+ ret = ovxxxx_write_reg16(client, OV2680_X_WIN_H, sensor->mode.h_output_size);
+ if (ret)
+ return ret;
+
+ ret = ovxxxx_write_reg16(client, OV2680_Y_WIN_H, sensor->mode.v_output_size);
+ if (ret)
+ return ret;
+
+ ret = ovxxxx_write_reg8(client, OV2680_REG_FORMAT1, fmt1);
+ if (ret)
+ return ret;
+
+ ret = ovxxxx_write_reg8(client, OV2680_REG_FORMAT2, fmt2);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
static int ov2680_set_fmt(struct v4l2_subdev *sd,
struct v4l2_subdev_state *sd_state,
struct v4l2_subdev_format *format)
@@ -416,18 +541,10 @@ static int ov2680_set_fmt(struct v4l2_subdev *sd,
/* s_power has not been called yet for std v4l2 clients (camorama) */
power_up(sd);
- ret = ov2680_write_reg_array(client, dev->res->regs);
- if (ret) {
- dev_err(&client->dev,
- "ov2680 write resolution register err: %d\n", ret);
- goto err;
- }
- ret = ovxxxx_write_reg16(client, OV2680_TIMING_VTS_H, dev->res->lines_per_frame);
- if (ret) {
- dev_err(&client->dev, "ov2680 write vts err: %d\n", ret);
+ ret = ov2680_set_mode(dev, fmt->width, fmt->height);
+ if (ret < 0)
goto err;
- }
/* Restore value of all ctrls */
ret = __v4l2_ctrl_handler_setup(&dev->ctrls.handler);
@@ -35,6 +35,13 @@
#define OV2680_NATIVE_WIDTH 1616
#define OV2680_NATIVE_HEIGHT 1216
+/* 1704 * 1294 * 30fps = 66MHz pixel clock */
+#define OV2680_PIXELS_PER_LINE 1704
+#define OV2680_LINES_PER_FRAME 1294
+
+/* If possible send 16 extra rows / lines to the ISP as padding */
+#define OV2680_END_MARGIN 16
+
#define OV2680_FOCAL_LENGTH_NUM 334 /*3.34mm*/
#define OV2680_BIN_FACTOR_MAX 4
@@ -105,10 +112,17 @@
#define OV2680_HORIZONTAL_OUTPUT_SIZE_L 0x3809 /*Bit[7:0]*/
#define OV2680_VERTICAL_OUTPUT_SIZE_H 0x380a /*Bit[3:0]*/
#define OV2680_VERTICAL_OUTPUT_SIZE_L 0x380b /*Bit[7:0]*/
-#define OV2680_TIMING_HTS_H 0x380C /*High 8-bit, and low 8-bit HTS address is 0x380d*/
-#define OV2680_TIMING_HTS_L 0x380D /*High 8-bit, and low 8-bit HTS address is 0x380d*/
-#define OV2680_TIMING_VTS_H 0x380e /*High 8-bit, and low 8-bit HTS address is 0x380f*/
-#define OV2680_TIMING_VTS_L 0x380f /*High 8-bit, and low 8-bit HTS address is 0x380f*/
+#define OV2680_HTS_H 0x380c
+#define OV2680_HTS_L 0x380d
+#define OV2680_VTS_H 0x380e
+#define OV2680_VTS_L 0x380f
+#define OV2680_ISP_X_WIN_H 0x3810
+#define OV2680_ISP_X_WIN_L 0x3811
+#define OV2680_ISP_Y_WIN_H 0x3812
+#define OV2680_ISP_Y_WIN_L 0x3813
+#define OV2680_X_INC 0x3814
+#define OV2680_Y_INC 0x3815
+
#define OV2680_FRAME_OFF_NUM 0x4202
/*Flip/Mirror*/
@@ -122,6 +136,12 @@
#define OV2680_REG_ISP_CTRL00 0x5080
+#define OV2680_X_WIN_H 0x5704
+#define OV2680_X_WIN_L 0x5705
+#define OV2680_Y_WIN_H 0x5706
+#define OV2680_Y_WIN_L 0x5707
+#define OV2680_WIN_CONTROL 0x5708
+
#define OV2680_START_STREAMING 0x01
#define OV2680_STOP_STREAMING 0x00
@@ -165,6 +185,15 @@ struct ov2680_device {
struct ov2680_mode {
struct v4l2_mbus_framefmt fmt;
+ bool binning;
+ u16 h_start;
+ u16 v_start;
+ u16 h_end;
+ u16 v_end;
+ u16 h_output_size;
+ u16 v_output_size;
+ u16 hts;
+ u16 vts;
} mode;
struct ov2680_ctrls {
@@ -246,6 +275,8 @@ static struct ov2680_reg const ov2680_global_setting[] = {
{0x3819, 0x04},
{0x4000, 0x81},
{0x4001, 0x40},
+ {0x4008, 0x00},
+ {0x4009, 0x03},
{0x4602, 0x02},
{0x481f, 0x36},
{0x4825, 0x36},
@@ -258,6 +289,8 @@ static struct ov2680_reg const ov2680_global_setting[] = {
{0x5008, 0x04},
{0x5009, 0x00},
{0x5080, 0x00},
+ {0x5081, 0x41},
+ {0x5708, 0x01}, //add for full size flip off and mirror off 2014/09/11
{0x3701, 0x64}, //add on 14/05/13
{0x3784, 0x0c}, //based OV2680_R1A_AM10.ovt add on 14/06/13
{0x5780, 0x3e}, //based OV2680_R1A_AM10.ovt,Adjust DPC setting (57xx) on 14/06/13