[v2] dt-bindings: media: st,stmipid02: Convert the text bindings to YAML
Commit Message
Convert the text STMIPID02 DT bindings to YAML DT format to permit
validation of DTs using this I2C CSI-2 to CPI bridge.
Signed-off-by: Marek Vasut <marex@denx.de>
---
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Sylvain Petinot <sylvain.petinot@foss.st.com>
Cc: devicetree@vger.kernel.org
Cc: linux-media@vger.kernel.org
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
---
V2: - Update YAML DT schema maintainers, add Benjamin and Sylvain, drop myself
- Update MAINTAINERS file, replace st,st-mipid02.txt to st,st-mipid02.yaml
- Fix bus-width to be 6,7,8,10,12 and drop default:
- Require port@2 and either or both port@0 or port@1
---
.../bindings/media/i2c/st,st-mipid02.txt | 82 --------
.../bindings/media/i2c/st,st-mipid02.yaml | 179 ++++++++++++++++++
MAINTAINERS | 2 +-
3 files changed, 180 insertions(+), 83 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/media/i2c/st,st-mipid02.txt
create mode 100644 Documentation/devicetree/bindings/media/i2c/st,st-mipid02.yaml
Comments
Hi Marek,
Thank you for your patch.
On 9/27/22 20:46, Marek Vasut wrote:
> Convert the text STMIPID02 DT bindings to YAML DT format to permit
> validation of DTs using this I2C CSI-2 to CPI bridge.
>
> Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Regards,
Benjamin
> ---
> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
> Cc: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
> Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Sylvain Petinot <sylvain.petinot@foss.st.com>
> Cc: devicetree@vger.kernel.org
> Cc: linux-media@vger.kernel.org
> Cc: linux-stm32@st-md-mailman.stormreply.com
> To: linux-arm-kernel@lists.infradead.org
> ---
> V2: - Update YAML DT schema maintainers, add Benjamin and Sylvain, drop myself
> - Update MAINTAINERS file, replace st,st-mipid02.txt to st,st-mipid02.yaml
> - Fix bus-width to be 6,7,8,10,12 and drop default:
> - Require port@2 and either or both port@0 or port@1
> ---
> .../bindings/media/i2c/st,st-mipid02.txt | 82 --------
> .../bindings/media/i2c/st,st-mipid02.yaml | 179 ++++++++++++++++++
> MAINTAINERS | 2 +-
> 3 files changed, 180 insertions(+), 83 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/media/i2c/st,st-mipid02.txt
> create mode 100644 Documentation/devicetree/bindings/media/i2c/st,st-mipid02.yaml
>
> diff --git a/Documentation/devicetree/bindings/media/i2c/st,st-mipid02.txt b/Documentation/devicetree/bindings/media/i2c/st,st-mipid02.txt
> deleted file mode 100644
> index 7976e6c40a80a..0000000000000
> --- a/Documentation/devicetree/bindings/media/i2c/st,st-mipid02.txt
> +++ /dev/null
> @@ -1,82 +0,0 @@
> -STMicroelectronics MIPID02 CSI-2 to PARALLEL bridge
> -
> -MIPID02 has two CSI-2 input ports, only one of those ports can be active at a
> -time. Active port input stream will be de-serialized and its content outputted
> -through PARALLEL output port.
> -CSI-2 first input port is a dual lane 800Mbps per lane whereas CSI-2 second
> -input port is a single lane 800Mbps. Both ports support clock and data lane
> -polarity swap. First port also supports data lane swap.
> -PARALLEL output port has a maximum width of 12 bits.
> -Supported formats are RAW6, RAW7, RAW8, RAW10, RAW12, RGB565, RGB888, RGB444,
> -YUV420 8-bit, YUV422 8-bit and YUV420 10-bit.
> -
> -Required Properties:
> -- compatible: shall be "st,st-mipid02"
> -- clocks: reference to the xclk input clock.
> -- clock-names: shall be "xclk".
> -- VDDE-supply: sensor digital IO supply. Must be 1.8 volts.
> -- VDDIN-supply: sensor internal regulator supply. Must be 1.8 volts.
> -
> -Optional Properties:
> -- reset-gpios: reference to the GPIO connected to the xsdn pin, if any.
> - This is an active low signal to the mipid02.
> -
> -Required subnodes:
> - - ports: A ports node with one port child node per device input and output
> - port, in accordance with the video interface bindings defined in
> - Documentation/devicetree/bindings/media/video-interfaces.txt. The
> - port nodes are numbered as follows:
> -
> - Port Description
> - -----------------------------
> - 0 CSI-2 first input port
> - 1 CSI-2 second input port
> - 2 PARALLEL output
> -
> -Endpoint node required property for CSI-2 connection is:
> -- data-lanes: shall be <1> for Port 1. for Port 0 dual-lane operation shall be
> -<1 2> or <2 1>. For Port 0 single-lane operation shall be <1> or <2>.
> -Endpoint node optional property for CSI-2 connection is:
> -- lane-polarities: any lane can be inverted or not.
> -
> -Endpoint node required property for PARALLEL connection is:
> -- bus-width: shall be set to <6>, <7>, <8>, <10> or <12>.
> -Endpoint node optional properties for PARALLEL connection are:
> -- hsync-active: active state of the HSYNC signal, 0/1 for LOW/HIGH respectively.
> -LOW being the default.
> -- vsync-active: active state of the VSYNC signal, 0/1 for LOW/HIGH respectively.
> -LOW being the default.
> -
> -Example:
> -
> -mipid02: csi2rx@14 {
> - compatible = "st,st-mipid02";
> - reg = <0x14>;
> - status = "okay";
> - clocks = <&clk_ext_camera_12>;
> - clock-names = "xclk";
> - VDDE-supply = <&vdd>;
> - VDDIN-supply = <&vdd>;
> - ports {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - port@0 {
> - reg = <0>;
> -
> - ep0: endpoint {
> - data-lanes = <1 2>;
> - remote-endpoint = <&mipi_csi2_in>;
> - };
> - };
> - port@2 {
> - reg = <2>;
> -
> - ep2: endpoint {
> - bus-width = <8>;
> - hsync-active = <0>;
> - vsync-active = <0>;
> - remote-endpoint = <¶llel_out>;
> - };
> - };
> - };
> -};
> diff --git a/Documentation/devicetree/bindings/media/i2c/st,st-mipid02.yaml b/Documentation/devicetree/bindings/media/i2c/st,st-mipid02.yaml
> new file mode 100644
> index 0000000000000..367f054fc5cb6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/st,st-mipid02.yaml
> @@ -0,0 +1,179 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/i2c/st,st-mipid02.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: STMicroelectronics MIPID02 CSI-2 to PARALLEL bridge
> +
> +maintainers:
> + - Benjamin Mugnier <benjamin.mugnier@foss.st.com>
> + - Sylvain Petinot <sylvain.petinot@foss.st.com>
> +
> +description:
> + MIPID02 has two CSI-2 input ports, only one of those ports can be
> + active at a time. Active port input stream will be de-serialized
> + and its content outputted through PARALLEL output port.
> + CSI-2 first input port is a dual lane 800Mbps per lane whereas CSI-2
> + second input port is a single lane 800Mbps. Both ports support clock
> + and data lane polarity swap. First port also supports data lane swap.
> + PARALLEL output port has a maximum width of 12 bits.
> + Supported formats are RAW6, RAW7, RAW8, RAW10, RAW12, RGB565, RGB888,
> + RGB444, YUV420 8-bit, YUV422 8-bit and YUV420 10-bit.
> +
> +properties:
> + compatible:
> + const: st,st-mipid02
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + maxItems: 1
> +
> + clock-names:
> + description:
> + Reference to the xclk input clock.
> + items:
> + - const: xclk
> +
> + VDDE-supply:
> + description:
> + Sensor digital IO supply. Must be 1.8 volts.
> +
> + VDDIN-supply:
> + description:
> + Sensor internal regulator supply. Must be 1.8 volts.
> +
> + reset-gpios:
> + description:
> + Reference to the GPIO connected to the xsdn pin, if any.
> + This is an active low signal to the mipid02.
> +
> + ports:
> + $ref: /schemas/graph.yaml#/properties/ports
> + properties:
> + port@0:
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + unevaluatedProperties: false
> + description: CSI-2 first input port
> + properties:
> + endpoint:
> + $ref: /schemas/media/video-interfaces.yaml#
> + unevaluatedProperties: false
> +
> + properties:
> + data-lanes:
> + description:
> + Single-lane operation shall be <1> or <2> .
> + Dual-lane operation shall be <1 2> or <2 1> .
> + minItems: 1
> + maxItems: 2
> + lane-polarity:
> + description:
> + Any lane can be inverted or not.
> + minItems: 1
> + maxItems: 2
> +
> + required:
> + - data-lanes
> +
> + port@1:
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + unevaluatedProperties: false
> + description: CSI-2 second input port
> + properties:
> + endpoint:
> + $ref: /schemas/media/video-interfaces.yaml#
> + unevaluatedProperties: false
> +
> + properties:
> + data-lanes:
> + description:
> + Single-lane operation shall be <1> or <2> .
> + maxItems: 1
> + lane-polarity:
> + description:
> + Any lane can be inverted or not.
> + maxItems: 1
> +
> + required:
> + - data-lanes
> +
> + port@2:
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + unevaluatedProperties: false
> + description: Output port
> + properties:
> + endpoint:
> + $ref: /schemas/media/video-interfaces.yaml#
> + unevaluatedProperties: false
> +
> + properties:
> + bus-width:
> + enum: [6, 7, 8, 10, 12]
> + hsync-active: true
> + vsync-active: true
> +
> + required:
> + - bus-width
> +
> + anyOf:
> + - required:
> + - port@0
> + - required:
> + - port@1
> +
> + required:
> + - port@2
> +
> +additionalProperties: false
> +
> +required:
> + - compatible
> + - reg
> + - clocks
> + - clock-names
> + - VDDE-supply
> + - VDDIN-supply
> + - ports
> +
> +examples:
> + - |
> + i2c {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + mipid02: csi2rx@14 {
> + compatible = "st,st-mipid02";
> + reg = <0x14>;
> + status = "okay";
> + clocks = <&clk_ext_camera_12>;
> + clock-names = "xclk";
> + VDDE-supply = <&vdd>;
> + VDDIN-supply = <&vdd>;
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + port@0 {
> + reg = <0>;
> +
> + ep0: endpoint {
> + data-lanes = <1 2>;
> + remote-endpoint = <&mipi_csi2_in>;
> + };
> + };
> + port@2 {
> + reg = <2>;
> +
> + ep2: endpoint {
> + bus-width = <8>;
> + hsync-active = <0>;
> + vsync-active = <0>;
> + remote-endpoint = <¶llel_out>;
> + };
> + };
> + };
> + };
> + };
> +
> +...
> diff --git a/MAINTAINERS b/MAINTAINERS
> index a34ec41fbf7a9..0133f746fdf80 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -19439,7 +19439,7 @@ M: Sylvain Petinot <sylvain.petinot@foss.st.com>
> L: linux-media@vger.kernel.org
> S: Maintained
> T: git git://linuxtv.org/media_tree.git
> -F: Documentation/devicetree/bindings/media/i2c/st,st-mipid02.txt
> +F: Documentation/devicetree/bindings/media/i2c/st,st-mipid02.yaml
> F: drivers/media/i2c/st-mipid02.c
>
> ST STM32 I2C/SMBUS DRIVER
On 27/09/2022 20:46, Marek Vasut wrote:
> Convert the text STMIPID02 DT bindings to YAML DT format to permit
> validation of DTs using this I2C CSI-2 to CPI bridge.
>
> Signed-off-by: Marek Vasut <marex@denx.de>
> ---
Thank you for your patch. There is something to discuss/improve.
> +properties:
> + compatible:
> + const: st,st-mipid02
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + maxItems: 1
> +
> + clock-names:
> + description:
> + Reference to the xclk input clock.
This usually goes to "clocks", but on the other hand it does not bring
any value (xclk is obvious from clock-names), so I propose to skip
entire description.
> + items:
> + - const: xclk
> +
> + VDDE-supply:
> + description:
> + Sensor digital IO supply. Must be 1.8 volts.
> +
> + VDDIN-supply:
> + description:
> + Sensor internal regulator supply. Must be 1.8 volts.
> +
> + reset-gpios:
> + description:
> + Reference to the GPIO connected to the xsdn pin, if any.
> + This is an active low signal to the mipid02.
> +
> + ports:
> + $ref: /schemas/graph.yaml#/properties/ports
> + properties:
> + port@0:
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + unevaluatedProperties: false
> + description: CSI-2 first input port
> + properties:
> + endpoint:
> + $ref: /schemas/media/video-interfaces.yaml#
> + unevaluatedProperties: false
> +
> + properties:
> + data-lanes:
> + description:
> + Single-lane operation shall be <1> or <2> .
> + Dual-lane operation shall be <1 2> or <2 1> .
> + minItems: 1
> + maxItems: 2
Blank line
> + lane-polarity:
The property is "lane-polarities"
> + description:
> + Any lane can be inverted or not.
> + minItems: 1
> + maxItems: 2
> +
> + required:
> + - data-lanes
> +
> + port@1:
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + unevaluatedProperties: false
> + description: CSI-2 second input port
> + properties:
> + endpoint:
> + $ref: /schemas/media/video-interfaces.yaml#
> + unevaluatedProperties: false
> +
> + properties:
> + data-lanes:
> + description:
> + Single-lane operation shall be <1> or <2> .
> + maxItems: 1
Blank line
> + lane-polarity:
lane-polarities
> + description:
> + Any lane can be inverted or not.
> + maxItems: 1
> +
> + required:
> + - data-lanes
> +
> + port@2:
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + unevaluatedProperties: false
> + description: Output port
> + properties:
> + endpoint:
> + $ref: /schemas/media/video-interfaces.yaml#
> + unevaluatedProperties: false
> +
> + properties:
> + bus-width:
> + enum: [6, 7, 8, 10, 12]
Blank line
> + hsync-active: true
> + vsync-active: true
You do not need these two - they come from video-interfaces.yaml
> +
> + required:
> + - bus-width
> +
> + anyOf:
> + - required:
> + - port@0
> + - required:
> + - port@1
> +
> + required:
> + - port@2
> +
Best regards,
Krzysztof
deleted file mode 100644
@@ -1,82 +0,0 @@
-STMicroelectronics MIPID02 CSI-2 to PARALLEL bridge
-
-MIPID02 has two CSI-2 input ports, only one of those ports can be active at a
-time. Active port input stream will be de-serialized and its content outputted
-through PARALLEL output port.
-CSI-2 first input port is a dual lane 800Mbps per lane whereas CSI-2 second
-input port is a single lane 800Mbps. Both ports support clock and data lane
-polarity swap. First port also supports data lane swap.
-PARALLEL output port has a maximum width of 12 bits.
-Supported formats are RAW6, RAW7, RAW8, RAW10, RAW12, RGB565, RGB888, RGB444,
-YUV420 8-bit, YUV422 8-bit and YUV420 10-bit.
-
-Required Properties:
-- compatible: shall be "st,st-mipid02"
-- clocks: reference to the xclk input clock.
-- clock-names: shall be "xclk".
-- VDDE-supply: sensor digital IO supply. Must be 1.8 volts.
-- VDDIN-supply: sensor internal regulator supply. Must be 1.8 volts.
-
-Optional Properties:
-- reset-gpios: reference to the GPIO connected to the xsdn pin, if any.
- This is an active low signal to the mipid02.
-
-Required subnodes:
- - ports: A ports node with one port child node per device input and output
- port, in accordance with the video interface bindings defined in
- Documentation/devicetree/bindings/media/video-interfaces.txt. The
- port nodes are numbered as follows:
-
- Port Description
- -----------------------------
- 0 CSI-2 first input port
- 1 CSI-2 second input port
- 2 PARALLEL output
-
-Endpoint node required property for CSI-2 connection is:
-- data-lanes: shall be <1> for Port 1. for Port 0 dual-lane operation shall be
-<1 2> or <2 1>. For Port 0 single-lane operation shall be <1> or <2>.
-Endpoint node optional property for CSI-2 connection is:
-- lane-polarities: any lane can be inverted or not.
-
-Endpoint node required property for PARALLEL connection is:
-- bus-width: shall be set to <6>, <7>, <8>, <10> or <12>.
-Endpoint node optional properties for PARALLEL connection are:
-- hsync-active: active state of the HSYNC signal, 0/1 for LOW/HIGH respectively.
-LOW being the default.
-- vsync-active: active state of the VSYNC signal, 0/1 for LOW/HIGH respectively.
-LOW being the default.
-
-Example:
-
-mipid02: csi2rx@14 {
- compatible = "st,st-mipid02";
- reg = <0x14>;
- status = "okay";
- clocks = <&clk_ext_camera_12>;
- clock-names = "xclk";
- VDDE-supply = <&vdd>;
- VDDIN-supply = <&vdd>;
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
- port@0 {
- reg = <0>;
-
- ep0: endpoint {
- data-lanes = <1 2>;
- remote-endpoint = <&mipi_csi2_in>;
- };
- };
- port@2 {
- reg = <2>;
-
- ep2: endpoint {
- bus-width = <8>;
- hsync-active = <0>;
- vsync-active = <0>;
- remote-endpoint = <¶llel_out>;
- };
- };
- };
-};
new file mode 100644
@@ -0,0 +1,179 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/st,st-mipid02.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics MIPID02 CSI-2 to PARALLEL bridge
+
+maintainers:
+ - Benjamin Mugnier <benjamin.mugnier@foss.st.com>
+ - Sylvain Petinot <sylvain.petinot@foss.st.com>
+
+description:
+ MIPID02 has two CSI-2 input ports, only one of those ports can be
+ active at a time. Active port input stream will be de-serialized
+ and its content outputted through PARALLEL output port.
+ CSI-2 first input port is a dual lane 800Mbps per lane whereas CSI-2
+ second input port is a single lane 800Mbps. Both ports support clock
+ and data lane polarity swap. First port also supports data lane swap.
+ PARALLEL output port has a maximum width of 12 bits.
+ Supported formats are RAW6, RAW7, RAW8, RAW10, RAW12, RGB565, RGB888,
+ RGB444, YUV420 8-bit, YUV422 8-bit and YUV420 10-bit.
+
+properties:
+ compatible:
+ const: st,st-mipid02
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ description:
+ Reference to the xclk input clock.
+ items:
+ - const: xclk
+
+ VDDE-supply:
+ description:
+ Sensor digital IO supply. Must be 1.8 volts.
+
+ VDDIN-supply:
+ description:
+ Sensor internal regulator supply. Must be 1.8 volts.
+
+ reset-gpios:
+ description:
+ Reference to the GPIO connected to the xsdn pin, if any.
+ This is an active low signal to the mipid02.
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: CSI-2 first input port
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ data-lanes:
+ description:
+ Single-lane operation shall be <1> or <2> .
+ Dual-lane operation shall be <1 2> or <2 1> .
+ minItems: 1
+ maxItems: 2
+ lane-polarity:
+ description:
+ Any lane can be inverted or not.
+ minItems: 1
+ maxItems: 2
+
+ required:
+ - data-lanes
+
+ port@1:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: CSI-2 second input port
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ data-lanes:
+ description:
+ Single-lane operation shall be <1> or <2> .
+ maxItems: 1
+ lane-polarity:
+ description:
+ Any lane can be inverted or not.
+ maxItems: 1
+
+ required:
+ - data-lanes
+
+ port@2:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: Output port
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ bus-width:
+ enum: [6, 7, 8, 10, 12]
+ hsync-active: true
+ vsync-active: true
+
+ required:
+ - bus-width
+
+ anyOf:
+ - required:
+ - port@0
+ - required:
+ - port@1
+
+ required:
+ - port@2
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - VDDE-supply
+ - VDDIN-supply
+ - ports
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ mipid02: csi2rx@14 {
+ compatible = "st,st-mipid02";
+ reg = <0x14>;
+ status = "okay";
+ clocks = <&clk_ext_camera_12>;
+ clock-names = "xclk";
+ VDDE-supply = <&vdd>;
+ VDDIN-supply = <&vdd>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+
+ ep0: endpoint {
+ data-lanes = <1 2>;
+ remote-endpoint = <&mipi_csi2_in>;
+ };
+ };
+ port@2 {
+ reg = <2>;
+
+ ep2: endpoint {
+ bus-width = <8>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ remote-endpoint = <¶llel_out>;
+ };
+ };
+ };
+ };
+ };
+
+...
@@ -19439,7 +19439,7 @@ M: Sylvain Petinot <sylvain.petinot@foss.st.com>
L: linux-media@vger.kernel.org
S: Maintained
T: git git://linuxtv.org/media_tree.git
-F: Documentation/devicetree/bindings/media/i2c/st,st-mipid02.txt
+F: Documentation/devicetree/bindings/media/i2c/st,st-mipid02.yaml
F: drivers/media/i2c/st-mipid02.c
ST STM32 I2C/SMBUS DRIVER