Message ID | 20210311234042.1588310-1-robh@kernel.org (mailing list archive) |
---|---|
State | Not Applicable, archived |
Headers |
Received: from vger.kernel.org ([23.128.96.18]) by www.linuxtv.org with esmtp (Exim 4.92) (envelope-from <linux-media-owner@vger.kernel.org>) id 1lKUwB-00CLQr-Ro; Thu, 11 Mar 2021 23:41:52 +0000 Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231168AbhCKXlS (ORCPT <rfc822;mkrufky@linuxtv.org> + 1 other); Thu, 11 Mar 2021 18:41:18 -0500 Received: from mail-il1-f175.google.com ([209.85.166.175]:35161 "EHLO mail-il1-f175.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S231157AbhCKXkq (ORCPT <rfc822;linux-media@vger.kernel.org>); Thu, 11 Mar 2021 18:40:46 -0500 Received: by mail-il1-f175.google.com with SMTP id h18so982102ils.2; Thu, 11 Mar 2021 15:40:45 -0800 (PST) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:mime-version :content-transfer-encoding; bh=n2sTZeIKn/ut99wwHC5Vg6UPseHZk+tqoKh8lUL2TvQ=; b=GXSc0Eo+cmgaTISPlnyP7qyFghNCZNt4pbgbnNziZb8Iv2qW7DfWrm+iNflEESVBqv djHFMsGD3wtJRbtGjGZSCRionh1UIr4wTg3GFsN5EdZmH9g1tCxWRtgYW6YenLrO90wW ++tcnumdWGBUNoUJ3IKsQUVk1PSalZguXgSbpXpQorFKlC1L5D45HmAUW6KR2y9CbzTY SvKgvzF0mjw4TFkqXIyfJ1FkSOo6JOMKOcZyAuGgemLpIpgaGxu0wYCatTHn1yXIWmnR x22sf6gVRTzP8xZowEsQLjWK8X3xn6FbHgZq1bOkVTViCHdJoe31XO8PddUxkOejJ66F eJCg== X-Gm-Message-State: AOAM531ybGf4SZ+2+WhpS+brkbaDxfAOR6nGmebv03RDdrp1qkJjWm7s 7gJoZO8iX7taBSmwECKAx0rbKCp5gQ== X-Google-Smtp-Source: ABdhPJzOJCcn0MxQ/FQUm4OPUFAamQ9LTRYrDIL12ik9Q7r+rHgRS52Z5CmXjBUN5YXhnE9C+QrFUA== X-Received: by 2002:a92:1e12:: with SMTP id e18mr717987ile.270.1615506045159; Thu, 11 Mar 2021 15:40:45 -0800 (PST) Received: from xps15.herring.priv ([64.188.179.253]) by smtp.googlemail.com with ESMTPSA id p13sm2097921ilp.1.2021.03.11.15.40.43 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 11 Mar 2021 15:40:44 -0800 (PST) From: Rob Herring <robh@kernel.org> To: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org, Sakari Ailus <sakari.ailus@linux.intel.com>, Laurent Pinchart <laurent.pinchart@ideasonboard.com>, Mauro Carvalho Chehab <mchehab@kernel.org>, linux-media@vger.kernel.org Subject: [PATCH] dt-bindings: media: Convert video-mux to DT schema Date: Thu, 11 Mar 2021 16:40:42 -0700 Message-Id: <20210311234042.1588310-1-robh@kernel.org> X-Mailer: git-send-email 2.27.0 MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Precedence: bulk List-ID: <linux-media.vger.kernel.org> X-Mailing-List: linux-media@vger.kernel.org X-LSpam-Score: -2.9 (--) X-LSpam-Report: No, score=-2.9 required=5.0 tests=BAYES_00=-1.9,MAILING_LIST_MULTI=-1 autolearn=ham autolearn_force=no |
Series |
dt-bindings: media: Convert video-mux to DT schema
|
|
Commit Message
Rob Herring
March 11, 2021, 11:40 p.m. UTC
Now that we have the graph schema, convert the video-mux binding to DT
schema.
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-media@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
---
.../devicetree/bindings/media/video-mux.txt | 60 ------------
.../devicetree/bindings/media/video-mux.yaml | 93 +++++++++++++++++++
2 files changed, 93 insertions(+), 60 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/media/video-mux.txt
create mode 100644 Documentation/devicetree/bindings/media/video-mux.yaml
Comments
Hi Rob, Thank you for the patch. On Thu, Mar 11, 2021 at 04:40:42PM -0700, Rob Herring wrote: > Now that we have the graph schema, convert the video-mux binding to DT > schema. > > Cc: Sakari Ailus <sakari.ailus@linux.intel.com> > Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > Cc: Mauro Carvalho Chehab <mchehab@kernel.org> > Cc: linux-media@vger.kernel.org > Signed-off-by: Rob Herring <robh@kernel.org> > --- > .../devicetree/bindings/media/video-mux.txt | 60 ------------ > .../devicetree/bindings/media/video-mux.yaml | 93 +++++++++++++++++++ > 2 files changed, 93 insertions(+), 60 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/media/video-mux.txt > create mode 100644 Documentation/devicetree/bindings/media/video-mux.yaml > > diff --git a/Documentation/devicetree/bindings/media/video-mux.txt b/Documentation/devicetree/bindings/media/video-mux.txt > deleted file mode 100644 > index 63b9dc913e45..000000000000 > --- a/Documentation/devicetree/bindings/media/video-mux.txt > +++ /dev/null > @@ -1,60 +0,0 @@ > -Video Multiplexer > -================= > - > -Video multiplexers allow to select between multiple input ports. Video received > -on the active input port is passed through to the output port. Muxes described > -by this binding are controlled by a multiplexer controller that is described by > -the bindings in Documentation/devicetree/bindings/mux/mux-controller.txt > - > -Required properties: > -- compatible : should be "video-mux" > -- mux-controls : mux controller node to use for operating the mux > -- #address-cells: should be <1> > -- #size-cells: should be <0> > -- port@*: at least three port nodes containing endpoints connecting to the > - source and sink devices according to of_graph bindings. The last port is > - the output port, all others are inputs. > - > -Optionally, #address-cells, #size-cells, and port nodes can be grouped under a > -ports node as described in Documentation/devicetree/bindings/graph.txt. > - > -Example: > - > - mux: mux-controller { > - compatible = "gpio-mux"; > - #mux-control-cells = <0>; > - > - mux-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; > - }; > - > - video-mux { > - compatible = "video-mux"; > - mux-controls = <&mux>; > - #address-cells = <1>; > - #size-cells = <0>; > - > - port@0 { > - reg = <0>; > - > - mux_in0: endpoint { > - remote-endpoint = <&video_source0_out>; > - }; > - }; > - > - port@1 { > - reg = <1>; > - > - mux_in1: endpoint { > - remote-endpoint = <&video_source1_out>; > - }; > - }; > - > - port@2 { > - reg = <2>; > - > - mux_out: endpoint { > - remote-endpoint = <&capture_interface_in>; > - }; > - }; > - }; > -}; > diff --git a/Documentation/devicetree/bindings/media/video-mux.yaml b/Documentation/devicetree/bindings/media/video-mux.yaml > new file mode 100644 > index 000000000000..780fbbd46a38 > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/video-mux.yaml > @@ -0,0 +1,93 @@ > +# SPDX-License-Identifier: GPL-2.0 > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/media/video-mux.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Video Multiplexer > + > +maintainers: > + - Sakari Ailus <sakari.ailus@linux.intel.com> > + - Laurent Pinchart <laurent.pinchart@ideasonboard.com> > + > +description: > + Video multiplexers allow to select between multiple input ports. Video > + received on the active input port is passed through to the output port. Muxes > + described by this binding are controlled by a multiplexer controller. > + > +properties: > + compatible: > + const: video-mux > + > + mux-controls: > + maxItems: 1 > + > + '#address-cells': > + const: 1 > + > + '#size-cells': > + const: 0 > + > + ports: > + $ref: /schemas/graph.yaml#/properties/ports > + > + patternProperties: > + '^port@': > + $ref: /schemas/graph.yaml#/properties/port Should we require at least port@0, port@1 and port@2 ? > + > +patternProperties: > + '^port@': > + $ref: /schemas/graph.yaml#/properties/port > + description: > + At least three port nodes containing endpoints connecting to the source > + and sink devices according to of_graph bindings. The last port is the > + output port, all others are inputs. > + > +required: > + - compatible > + - mux-controls Should a constraint be added to ensure that either a ports node or port@0, port@1 and port@2 nodes exists ? Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/gpio/gpio.h> > + > + mux: mux-controller { > + compatible = "gpio-mux"; > + #mux-control-cells = <0>; > + > + mux-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; > + }; > + > + video-mux { > + compatible = "video-mux"; > + mux-controls = <&mux>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + > + mux_in0: endpoint { > + remote-endpoint = <&video_source0_out>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + > + mux_in1: endpoint { > + remote-endpoint = <&video_source1_out>; > + }; > + }; > + > + port@2 { > + reg = <2>; > + > + mux_out: endpoint { > + remote-endpoint = <&capture_interface_in>; > + }; > + }; > + }; > +...
Hi Laurent, On Fri, Mar 12, 2021 at 03:25:11AM +0200, Laurent Pinchart wrote: > Hi Rob, > > Thank you for the patch. > > On Thu, Mar 11, 2021 at 04:40:42PM -0700, Rob Herring wrote: > > Now that we have the graph schema, convert the video-mux binding to DT > > schema. > > > > Cc: Sakari Ailus <sakari.ailus@linux.intel.com> > > Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > > Cc: Mauro Carvalho Chehab <mchehab@kernel.org> > > Cc: linux-media@vger.kernel.org > > Signed-off-by: Rob Herring <robh@kernel.org> > > --- > > .../devicetree/bindings/media/video-mux.txt | 60 ------------ > > .../devicetree/bindings/media/video-mux.yaml | 93 +++++++++++++++++++ > > 2 files changed, 93 insertions(+), 60 deletions(-) > > delete mode 100644 Documentation/devicetree/bindings/media/video-mux.txt > > create mode 100644 Documentation/devicetree/bindings/media/video-mux.yaml > > > > diff --git a/Documentation/devicetree/bindings/media/video-mux.txt b/Documentation/devicetree/bindings/media/video-mux.txt > > deleted file mode 100644 > > index 63b9dc913e45..000000000000 > > --- a/Documentation/devicetree/bindings/media/video-mux.txt > > +++ /dev/null > > @@ -1,60 +0,0 @@ > > -Video Multiplexer > > -================= > > - > > -Video multiplexers allow to select between multiple input ports. Video received > > -on the active input port is passed through to the output port. Muxes described > > -by this binding are controlled by a multiplexer controller that is described by > > -the bindings in Documentation/devicetree/bindings/mux/mux-controller.txt > > - > > -Required properties: > > -- compatible : should be "video-mux" > > -- mux-controls : mux controller node to use for operating the mux > > -- #address-cells: should be <1> > > -- #size-cells: should be <0> > > -- port@*: at least three port nodes containing endpoints connecting to the > > - source and sink devices according to of_graph bindings. The last port is > > - the output port, all others are inputs. > > - > > -Optionally, #address-cells, #size-cells, and port nodes can be grouped under a > > -ports node as described in Documentation/devicetree/bindings/graph.txt. > > - > > -Example: > > - > > - mux: mux-controller { > > - compatible = "gpio-mux"; > > - #mux-control-cells = <0>; > > - > > - mux-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; > > - }; > > - > > - video-mux { > > - compatible = "video-mux"; > > - mux-controls = <&mux>; > > - #address-cells = <1>; > > - #size-cells = <0>; > > - > > - port@0 { > > - reg = <0>; > > - > > - mux_in0: endpoint { > > - remote-endpoint = <&video_source0_out>; > > - }; > > - }; > > - > > - port@1 { > > - reg = <1>; > > - > > - mux_in1: endpoint { > > - remote-endpoint = <&video_source1_out>; > > - }; > > - }; > > - > > - port@2 { > > - reg = <2>; > > - > > - mux_out: endpoint { > > - remote-endpoint = <&capture_interface_in>; > > - }; > > - }; > > - }; > > -}; > > diff --git a/Documentation/devicetree/bindings/media/video-mux.yaml b/Documentation/devicetree/bindings/media/video-mux.yaml > > new file mode 100644 > > index 000000000000..780fbbd46a38 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/media/video-mux.yaml > > @@ -0,0 +1,93 @@ > > +# SPDX-License-Identifier: GPL-2.0 > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/media/video-mux.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Video Multiplexer > > + > > +maintainers: > > + - Sakari Ailus <sakari.ailus@linux.intel.com> > > + - Laurent Pinchart <laurent.pinchart@ideasonboard.com> > > + > > +description: > > + Video multiplexers allow to select between multiple input ports. Video > > + received on the active input port is passed through to the output port. Muxes > > + described by this binding are controlled by a multiplexer controller. > > + > > +properties: > > + compatible: > > + const: video-mux > > + > > + mux-controls: > > + maxItems: 1 > > + > > + '#address-cells': > > + const: 1 > > + > > + '#size-cells': > > + const: 0 > > + > > + ports: > > + $ref: /schemas/graph.yaml#/properties/ports > > + > > + patternProperties: > > + '^port@': > > + $ref: /schemas/graph.yaml#/properties/port > > Should we require at least port@0, port@1 and port@2 ? > > > + > > +patternProperties: > > + '^port@': > > + $ref: /schemas/graph.yaml#/properties/port > > + description: > > + At least three port nodes containing endpoints connecting to the source > > + and sink devices according to of_graph bindings. The last port is the > > + output port, all others are inputs. > > + > > +required: > > + - compatible > > + - mux-controls > > Should a constraint be added to ensure that either a ports node or > port@0, port@1 and port@2 nodes exists ? It's not meaningful to have this device without such nodes. But a mux with more ports could be connected in a way that leaves one or both of ports 1 and 2 unconnected. It's still not a likely configuration but a possible one. Either way, Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> > > Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > > > + > > +additionalProperties: false > > + > > +examples: > > + - | > > + #include <dt-bindings/gpio/gpio.h> > > + > > + mux: mux-controller { > > + compatible = "gpio-mux"; > > + #mux-control-cells = <0>; > > + > > + mux-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; > > + }; > > + > > + video-mux { > > + compatible = "video-mux"; > > + mux-controls = <&mux>; > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + port@0 { > > + reg = <0>; > > + > > + mux_in0: endpoint { > > + remote-endpoint = <&video_source0_out>; > > + }; > > + }; > > + > > + port@1 { > > + reg = <1>; > > + > > + mux_in1: endpoint { > > + remote-endpoint = <&video_source1_out>; > > + }; > > + }; > > + > > + port@2 { > > + reg = <2>; > > + > > + mux_out: endpoint { > > + remote-endpoint = <&capture_interface_in>; > > + }; > > + }; > > + }; > > +...
Hi Sakari, On Fri, Mar 12, 2021 at 09:29:04AM +0200, Sakari Ailus wrote: > On Fri, Mar 12, 2021 at 03:25:11AM +0200, Laurent Pinchart wrote: > > On Thu, Mar 11, 2021 at 04:40:42PM -0700, Rob Herring wrote: > > > Now that we have the graph schema, convert the video-mux binding to DT > > > schema. > > > > > > Cc: Sakari Ailus <sakari.ailus@linux.intel.com> > > > Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > > > Cc: Mauro Carvalho Chehab <mchehab@kernel.org> > > > Cc: linux-media@vger.kernel.org > > > Signed-off-by: Rob Herring <robh@kernel.org> > > > --- > > > .../devicetree/bindings/media/video-mux.txt | 60 ------------ > > > .../devicetree/bindings/media/video-mux.yaml | 93 +++++++++++++++++++ > > > 2 files changed, 93 insertions(+), 60 deletions(-) > > > delete mode 100644 Documentation/devicetree/bindings/media/video-mux.txt > > > create mode 100644 Documentation/devicetree/bindings/media/video-mux.yaml > > > > > > diff --git a/Documentation/devicetree/bindings/media/video-mux.txt b/Documentation/devicetree/bindings/media/video-mux.txt > > > deleted file mode 100644 > > > index 63b9dc913e45..000000000000 > > > --- a/Documentation/devicetree/bindings/media/video-mux.txt > > > +++ /dev/null > > > @@ -1,60 +0,0 @@ > > > -Video Multiplexer > > > -================= > > > - > > > -Video multiplexers allow to select between multiple input ports. Video received > > > -on the active input port is passed through to the output port. Muxes described > > > -by this binding are controlled by a multiplexer controller that is described by > > > -the bindings in Documentation/devicetree/bindings/mux/mux-controller.txt > > > - > > > -Required properties: > > > -- compatible : should be "video-mux" > > > -- mux-controls : mux controller node to use for operating the mux > > > -- #address-cells: should be <1> > > > -- #size-cells: should be <0> > > > -- port@*: at least three port nodes containing endpoints connecting to the > > > - source and sink devices according to of_graph bindings. The last port is > > > - the output port, all others are inputs. > > > - > > > -Optionally, #address-cells, #size-cells, and port nodes can be grouped under a > > > -ports node as described in Documentation/devicetree/bindings/graph.txt. > > > - > > > -Example: > > > - > > > - mux: mux-controller { > > > - compatible = "gpio-mux"; > > > - #mux-control-cells = <0>; > > > - > > > - mux-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; > > > - }; > > > - > > > - video-mux { > > > - compatible = "video-mux"; > > > - mux-controls = <&mux>; > > > - #address-cells = <1>; > > > - #size-cells = <0>; > > > - > > > - port@0 { > > > - reg = <0>; > > > - > > > - mux_in0: endpoint { > > > - remote-endpoint = <&video_source0_out>; > > > - }; > > > - }; > > > - > > > - port@1 { > > > - reg = <1>; > > > - > > > - mux_in1: endpoint { > > > - remote-endpoint = <&video_source1_out>; > > > - }; > > > - }; > > > - > > > - port@2 { > > > - reg = <2>; > > > - > > > - mux_out: endpoint { > > > - remote-endpoint = <&capture_interface_in>; > > > - }; > > > - }; > > > - }; > > > -}; > > > diff --git a/Documentation/devicetree/bindings/media/video-mux.yaml b/Documentation/devicetree/bindings/media/video-mux.yaml > > > new file mode 100644 > > > index 000000000000..780fbbd46a38 > > > --- /dev/null > > > +++ b/Documentation/devicetree/bindings/media/video-mux.yaml > > > @@ -0,0 +1,93 @@ > > > +# SPDX-License-Identifier: GPL-2.0 > > > +%YAML 1.2 > > > +--- > > > +$id: http://devicetree.org/schemas/media/video-mux.yaml# > > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > > + > > > +title: Video Multiplexer > > > + > > > +maintainers: > > > + - Sakari Ailus <sakari.ailus@linux.intel.com> > > > + - Laurent Pinchart <laurent.pinchart@ideasonboard.com> > > > + > > > +description: > > > + Video multiplexers allow to select between multiple input ports. Video > > > + received on the active input port is passed through to the output port. Muxes > > > + described by this binding are controlled by a multiplexer controller. > > > + > > > +properties: > > > + compatible: > > > + const: video-mux > > > + > > > + mux-controls: > > > + maxItems: 1 > > > + > > > + '#address-cells': > > > + const: 1 > > > + > > > + '#size-cells': > > > + const: 0 > > > + > > > + ports: > > > + $ref: /schemas/graph.yaml#/properties/ports > > > + > > > + patternProperties: > > > + '^port@': > > > + $ref: /schemas/graph.yaml#/properties/port > > > > Should we require at least port@0, port@1 and port@2 ? > > > > > + > > > +patternProperties: > > > + '^port@': > > > + $ref: /schemas/graph.yaml#/properties/port > > > + description: > > > + At least three port nodes containing endpoints connecting to the source > > > + and sink devices according to of_graph bindings. The last port is the > > > + output port, all others are inputs. > > > + > > > +required: > > > + - compatible > > > + - mux-controls > > > > Should a constraint be added to ensure that either a ports node or > > port@0, port@1 and port@2 nodes exists ? > > It's not meaningful to have this device without such nodes. But a mux with > more ports could be connected in a way that leaves one or both of ports 1 > and 2 unconnected. It's still not a likely configuration but a possible > one. Those ports wouldn't be connected, but they could still exist in DT. > Either way, > > Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> > > > Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > > > > > + > > > +additionalProperties: false > > > + > > > +examples: > > > + - | > > > + #include <dt-bindings/gpio/gpio.h> > > > + > > > + mux: mux-controller { > > > + compatible = "gpio-mux"; > > > + #mux-control-cells = <0>; > > > + > > > + mux-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; > > > + }; > > > + > > > + video-mux { > > > + compatible = "video-mux"; > > > + mux-controls = <&mux>; > > > + #address-cells = <1>; > > > + #size-cells = <0>; > > > + > > > + port@0 { > > > + reg = <0>; > > > + > > > + mux_in0: endpoint { > > > + remote-endpoint = <&video_source0_out>; > > > + }; > > > + }; > > > + > > > + port@1 { > > > + reg = <1>; > > > + > > > + mux_in1: endpoint { > > > + remote-endpoint = <&video_source1_out>; > > > + }; > > > + }; > > > + > > > + port@2 { > > > + reg = <2>; > > > + > > > + mux_out: endpoint { > > > + remote-endpoint = <&capture_interface_in>; > > > + }; > > > + }; > > > + }; > > > +...
On Thu, Mar 11, 2021 at 6:25 PM Laurent Pinchart <laurent.pinchart@ideasonboard.com> wrote: > > Hi Rob, > > Thank you for the patch. > > On Thu, Mar 11, 2021 at 04:40:42PM -0700, Rob Herring wrote: > > Now that we have the graph schema, convert the video-mux binding to DT > > schema. > > > > Cc: Sakari Ailus <sakari.ailus@linux.intel.com> > > Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > > Cc: Mauro Carvalho Chehab <mchehab@kernel.org> > > Cc: linux-media@vger.kernel.org > > Signed-off-by: Rob Herring <robh@kernel.org> > > --- > > .../devicetree/bindings/media/video-mux.txt | 60 ------------ > > .../devicetree/bindings/media/video-mux.yaml | 93 +++++++++++++++++++ > > 2 files changed, 93 insertions(+), 60 deletions(-) > > delete mode 100644 Documentation/devicetree/bindings/media/video-mux.txt > > create mode 100644 Documentation/devicetree/bindings/media/video-mux.yaml > > > > diff --git a/Documentation/devicetree/bindings/media/video-mux.txt b/Documentation/devicetree/bindings/media/video-mux.txt > > deleted file mode 100644 > > index 63b9dc913e45..000000000000 > > --- a/Documentation/devicetree/bindings/media/video-mux.txt > > +++ /dev/null > > @@ -1,60 +0,0 @@ > > -Video Multiplexer > > -================= > > - > > -Video multiplexers allow to select between multiple input ports. Video received > > -on the active input port is passed through to the output port. Muxes described > > -by this binding are controlled by a multiplexer controller that is described by > > -the bindings in Documentation/devicetree/bindings/mux/mux-controller.txt > > - > > -Required properties: > > -- compatible : should be "video-mux" > > -- mux-controls : mux controller node to use for operating the mux > > -- #address-cells: should be <1> > > -- #size-cells: should be <0> > > -- port@*: at least three port nodes containing endpoints connecting to the > > - source and sink devices according to of_graph bindings. The last port is > > - the output port, all others are inputs. > > - > > -Optionally, #address-cells, #size-cells, and port nodes can be grouped under a > > -ports node as described in Documentation/devicetree/bindings/graph.txt. > > - > > -Example: > > - > > - mux: mux-controller { > > - compatible = "gpio-mux"; > > - #mux-control-cells = <0>; > > - > > - mux-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; > > - }; > > - > > - video-mux { > > - compatible = "video-mux"; > > - mux-controls = <&mux>; > > - #address-cells = <1>; > > - #size-cells = <0>; > > - > > - port@0 { > > - reg = <0>; > > - > > - mux_in0: endpoint { > > - remote-endpoint = <&video_source0_out>; > > - }; > > - }; > > - > > - port@1 { > > - reg = <1>; > > - > > - mux_in1: endpoint { > > - remote-endpoint = <&video_source1_out>; > > - }; > > - }; > > - > > - port@2 { > > - reg = <2>; > > - > > - mux_out: endpoint { > > - remote-endpoint = <&capture_interface_in>; > > - }; > > - }; > > - }; > > -}; > > diff --git a/Documentation/devicetree/bindings/media/video-mux.yaml b/Documentation/devicetree/bindings/media/video-mux.yaml > > new file mode 100644 > > index 000000000000..780fbbd46a38 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/media/video-mux.yaml > > @@ -0,0 +1,93 @@ > > +# SPDX-License-Identifier: GPL-2.0 > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/media/video-mux.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Video Multiplexer > > + > > +maintainers: > > + - Sakari Ailus <sakari.ailus@linux.intel.com> > > + - Laurent Pinchart <laurent.pinchart@ideasonboard.com> > > + > > +description: > > + Video multiplexers allow to select between multiple input ports. Video > > + received on the active input port is passed through to the output port. Muxes > > + described by this binding are controlled by a multiplexer controller. > > + > > +properties: > > + compatible: > > + const: video-mux > > + > > + mux-controls: > > + maxItems: 1 > > + > > + '#address-cells': > > + const: 1 > > + > > + '#size-cells': > > + const: 0 > > + > > + ports: > > + $ref: /schemas/graph.yaml#/properties/ports > > + > > + patternProperties: > > + '^port@': > > + $ref: /schemas/graph.yaml#/properties/port > > Should we require at least port@0, port@1 and port@2 ? Is the numbering defined to be 0-N or it's defined by the mux values? Even if the former case, a port could be missing if the input is not hooked up. > > +patternProperties: > > + '^port@': > > + $ref: /schemas/graph.yaml#/properties/port > > + description: > > + At least three port nodes containing endpoints connecting to the source > > + and sink devices according to of_graph bindings. The last port is the > > + output port, all others are inputs. > > + > > +required: > > + - compatible > > + - mux-controls > > Should a constraint be added to ensure that either a ports node or > port@0, port@1 and port@2 nodes exists ? I kind of figured missing mux entries in a mux node was obvious enough. Though given the above, I don't think we can. Also, we don't have any users with 'ports', so I debated doing away with that. Supporting either way is kind of pointless. > > Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Thanks, Rob
On Fri, Mar 12, 2021 at 3:06 AM Laurent Pinchart <laurent.pinchart@ideasonboard.com> wrote: > > Hi Sakari, > > On Fri, Mar 12, 2021 at 09:29:04AM +0200, Sakari Ailus wrote: > > On Fri, Mar 12, 2021 at 03:25:11AM +0200, Laurent Pinchart wrote: > > > On Thu, Mar 11, 2021 at 04:40:42PM -0700, Rob Herring wrote: > > > > Now that we have the graph schema, convert the video-mux binding to DT > > > > schema. > > > > > > > > Cc: Sakari Ailus <sakari.ailus@linux.intel.com> > > > > Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > > > > Cc: Mauro Carvalho Chehab <mchehab@kernel.org> > > > > Cc: linux-media@vger.kernel.org > > > > Signed-off-by: Rob Herring <robh@kernel.org> > > > > --- > > > > .../devicetree/bindings/media/video-mux.txt | 60 ------------ > > > > .../devicetree/bindings/media/video-mux.yaml | 93 +++++++++++++++++++ > > > > 2 files changed, 93 insertions(+), 60 deletions(-) > > > > delete mode 100644 Documentation/devicetree/bindings/media/video-mux.txt > > > > create mode 100644 Documentation/devicetree/bindings/media/video-mux.yaml > > > > > > > > diff --git a/Documentation/devicetree/bindings/media/video-mux.txt b/Documentation/devicetree/bindings/media/video-mux.txt > > > > deleted file mode 100644 > > > > index 63b9dc913e45..000000000000 > > > > --- a/Documentation/devicetree/bindings/media/video-mux.txt > > > > +++ /dev/null > > > > @@ -1,60 +0,0 @@ > > > > -Video Multiplexer > > > > -================= > > > > - > > > > -Video multiplexers allow to select between multiple input ports. Video received > > > > -on the active input port is passed through to the output port. Muxes described > > > > -by this binding are controlled by a multiplexer controller that is described by > > > > -the bindings in Documentation/devicetree/bindings/mux/mux-controller.txt > > > > - > > > > -Required properties: > > > > -- compatible : should be "video-mux" > > > > -- mux-controls : mux controller node to use for operating the mux > > > > -- #address-cells: should be <1> > > > > -- #size-cells: should be <0> > > > > -- port@*: at least three port nodes containing endpoints connecting to the > > > > - source and sink devices according to of_graph bindings. The last port is > > > > - the output port, all others are inputs. > > > > - > > > > -Optionally, #address-cells, #size-cells, and port nodes can be grouped under a > > > > -ports node as described in Documentation/devicetree/bindings/graph.txt. > > > > - > > > > -Example: > > > > - > > > > - mux: mux-controller { > > > > - compatible = "gpio-mux"; > > > > - #mux-control-cells = <0>; > > > > - > > > > - mux-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; > > > > - }; > > > > - > > > > - video-mux { > > > > - compatible = "video-mux"; > > > > - mux-controls = <&mux>; > > > > - #address-cells = <1>; > > > > - #size-cells = <0>; > > > > - > > > > - port@0 { > > > > - reg = <0>; > > > > - > > > > - mux_in0: endpoint { > > > > - remote-endpoint = <&video_source0_out>; > > > > - }; > > > > - }; > > > > - > > > > - port@1 { > > > > - reg = <1>; > > > > - > > > > - mux_in1: endpoint { > > > > - remote-endpoint = <&video_source1_out>; > > > > - }; > > > > - }; > > > > - > > > > - port@2 { > > > > - reg = <2>; > > > > - > > > > - mux_out: endpoint { > > > > - remote-endpoint = <&capture_interface_in>; > > > > - }; > > > > - }; > > > > - }; > > > > -}; > > > > diff --git a/Documentation/devicetree/bindings/media/video-mux.yaml b/Documentation/devicetree/bindings/media/video-mux.yaml > > > > new file mode 100644 > > > > index 000000000000..780fbbd46a38 > > > > --- /dev/null > > > > +++ b/Documentation/devicetree/bindings/media/video-mux.yaml > > > > @@ -0,0 +1,93 @@ > > > > +# SPDX-License-Identifier: GPL-2.0 > > > > +%YAML 1.2 > > > > +--- > > > > +$id: http://devicetree.org/schemas/media/video-mux.yaml# > > > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > > > + > > > > +title: Video Multiplexer > > > > + > > > > +maintainers: > > > > + - Sakari Ailus <sakari.ailus@linux.intel.com> > > > > + - Laurent Pinchart <laurent.pinchart@ideasonboard.com> > > > > + > > > > +description: > > > > + Video multiplexers allow to select between multiple input ports. Video > > > > + received on the active input port is passed through to the output port. Muxes > > > > + described by this binding are controlled by a multiplexer controller. > > > > + > > > > +properties: > > > > + compatible: > > > > + const: video-mux > > > > + > > > > + mux-controls: > > > > + maxItems: 1 > > > > + > > > > + '#address-cells': > > > > + const: 1 > > > > + > > > > + '#size-cells': > > > > + const: 0 > > > > + > > > > + ports: > > > > + $ref: /schemas/graph.yaml#/properties/ports > > > > + > > > > + patternProperties: > > > > + '^port@': > > > > + $ref: /schemas/graph.yaml#/properties/port > > > > > > Should we require at least port@0, port@1 and port@2 ? > > > > > > > + > > > > +patternProperties: > > > > + '^port@': > > > > + $ref: /schemas/graph.yaml#/properties/port > > > > + description: > > > > + At least three port nodes containing endpoints connecting to the source > > > > + and sink devices according to of_graph bindings. The last port is the > > > > + output port, all others are inputs. > > > > + > > > > +required: > > > > + - compatible > > > > + - mux-controls > > > > > > Should a constraint be added to ensure that either a ports node or > > > port@0, port@1 and port@2 nodes exists ? > > > > It's not meaningful to have this device without such nodes. But a mux with > > more ports could be connected in a way that leaves one or both of ports 1 > > and 2 unconnected. It's still not a likely configuration but a possible > > one. > > Those ports wouldn't be connected, but they could still exist in DT. Could or must? I think we could have both cases. If there's never a connection on a board no point in having the node there. If there's a possible connection (via a connector and overlay), then we may want the node. Rob
Hi Rob, On Fri, Mar 12, 2021 at 08:33:06AM -0700, Rob Herring wrote: > On Fri, Mar 12, 2021 at 3:06 AM Laurent Pinchart wrote: > > On Fri, Mar 12, 2021 at 09:29:04AM +0200, Sakari Ailus wrote: > > > On Fri, Mar 12, 2021 at 03:25:11AM +0200, Laurent Pinchart wrote: > > > > On Thu, Mar 11, 2021 at 04:40:42PM -0700, Rob Herring wrote: > > > > > Now that we have the graph schema, convert the video-mux binding to DT > > > > > schema. > > > > > > > > > > Cc: Sakari Ailus <sakari.ailus@linux.intel.com> > > > > > Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > > > > > Cc: Mauro Carvalho Chehab <mchehab@kernel.org> > > > > > Cc: linux-media@vger.kernel.org > > > > > Signed-off-by: Rob Herring <robh@kernel.org> > > > > > --- > > > > > .../devicetree/bindings/media/video-mux.txt | 60 ------------ > > > > > .../devicetree/bindings/media/video-mux.yaml | 93 +++++++++++++++++++ > > > > > 2 files changed, 93 insertions(+), 60 deletions(-) > > > > > delete mode 100644 Documentation/devicetree/bindings/media/video-mux.txt > > > > > create mode 100644 Documentation/devicetree/bindings/media/video-mux.yaml > > > > > > > > > > diff --git a/Documentation/devicetree/bindings/media/video-mux.txt b/Documentation/devicetree/bindings/media/video-mux.txt > > > > > deleted file mode 100644 > > > > > index 63b9dc913e45..000000000000 > > > > > --- a/Documentation/devicetree/bindings/media/video-mux.txt > > > > > +++ /dev/null > > > > > @@ -1,60 +0,0 @@ > > > > > -Video Multiplexer > > > > > -================= > > > > > - > > > > > -Video multiplexers allow to select between multiple input ports. Video received > > > > > -on the active input port is passed through to the output port. Muxes described > > > > > -by this binding are controlled by a multiplexer controller that is described by > > > > > -the bindings in Documentation/devicetree/bindings/mux/mux-controller.txt > > > > > - > > > > > -Required properties: > > > > > -- compatible : should be "video-mux" > > > > > -- mux-controls : mux controller node to use for operating the mux > > > > > -- #address-cells: should be <1> > > > > > -- #size-cells: should be <0> > > > > > -- port@*: at least three port nodes containing endpoints connecting to the > > > > > - source and sink devices according to of_graph bindings. The last port is > > > > > - the output port, all others are inputs. > > > > > - > > > > > -Optionally, #address-cells, #size-cells, and port nodes can be grouped under a > > > > > -ports node as described in Documentation/devicetree/bindings/graph.txt. > > > > > - > > > > > -Example: > > > > > - > > > > > - mux: mux-controller { > > > > > - compatible = "gpio-mux"; > > > > > - #mux-control-cells = <0>; > > > > > - > > > > > - mux-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; > > > > > - }; > > > > > - > > > > > - video-mux { > > > > > - compatible = "video-mux"; > > > > > - mux-controls = <&mux>; > > > > > - #address-cells = <1>; > > > > > - #size-cells = <0>; > > > > > - > > > > > - port@0 { > > > > > - reg = <0>; > > > > > - > > > > > - mux_in0: endpoint { > > > > > - remote-endpoint = <&video_source0_out>; > > > > > - }; > > > > > - }; > > > > > - > > > > > - port@1 { > > > > > - reg = <1>; > > > > > - > > > > > - mux_in1: endpoint { > > > > > - remote-endpoint = <&video_source1_out>; > > > > > - }; > > > > > - }; > > > > > - > > > > > - port@2 { > > > > > - reg = <2>; > > > > > - > > > > > - mux_out: endpoint { > > > > > - remote-endpoint = <&capture_interface_in>; > > > > > - }; > > > > > - }; > > > > > - }; > > > > > -}; > > > > > diff --git a/Documentation/devicetree/bindings/media/video-mux.yaml b/Documentation/devicetree/bindings/media/video-mux.yaml > > > > > new file mode 100644 > > > > > index 000000000000..780fbbd46a38 > > > > > --- /dev/null > > > > > +++ b/Documentation/devicetree/bindings/media/video-mux.yaml > > > > > @@ -0,0 +1,93 @@ > > > > > +# SPDX-License-Identifier: GPL-2.0 > > > > > +%YAML 1.2 > > > > > +--- > > > > > +$id: http://devicetree.org/schemas/media/video-mux.yaml# > > > > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > > > > + > > > > > +title: Video Multiplexer > > > > > + > > > > > +maintainers: > > > > > + - Sakari Ailus <sakari.ailus@linux.intel.com> > > > > > + - Laurent Pinchart <laurent.pinchart@ideasonboard.com> > > > > > + > > > > > +description: > > > > > + Video multiplexers allow to select between multiple input ports. Video > > > > > + received on the active input port is passed through to the output port. Muxes > > > > > + described by this binding are controlled by a multiplexer controller. > > > > > + > > > > > +properties: > > > > > + compatible: > > > > > + const: video-mux > > > > > + > > > > > + mux-controls: > > > > > + maxItems: 1 > > > > > + > > > > > + '#address-cells': > > > > > + const: 1 > > > > > + > > > > > + '#size-cells': > > > > > + const: 0 > > > > > + > > > > > + ports: > > > > > + $ref: /schemas/graph.yaml#/properties/ports > > > > > + > > > > > + patternProperties: > > > > > + '^port@': > > > > > + $ref: /schemas/graph.yaml#/properties/port > > > > > > > > Should we require at least port@0, port@1 and port@2 ? > > > > > > > > > + > > > > > +patternProperties: > > > > > + '^port@': > > > > > + $ref: /schemas/graph.yaml#/properties/port > > > > > + description: > > > > > + At least three port nodes containing endpoints connecting to the source > > > > > + and sink devices according to of_graph bindings. The last port is the > > > > > + output port, all others are inputs. > > > > > + > > > > > +required: > > > > > + - compatible > > > > > + - mux-controls > > > > > > > > Should a constraint be added to ensure that either a ports node or > > > > port@0, port@1 and port@2 nodes exists ? > > > > > > It's not meaningful to have this device without such nodes. But a mux with > > > more ports could be connected in a way that leaves one or both of ports 1 > > > and 2 unconnected. It's still not a likely configuration but a possible > > > one. > > > > Those ports wouldn't be connected, but they could still exist in DT. > > Could or must? I think we could have both cases. If there's never a > connection on a board no point in having the node there. If there's a > possible connection (via a connector and overlay), then we may want > the node. I tend to treat ports as mandatory and endpoints as optional, as the former describe a intrinsic property of the device and the latter a connection in a specific system. Looking at the video-mux driver, it first finds the number of the last port, and then creates N V4L2 subdev pads, regardless of whether a port exists for it. There's thus an implicit assumption that ports will be numbered 0 to N-1 and will all exist. If a port doesn't exist in DT, the driver should still operate correctly as far as I can tell, but it will in any case create N pads. Now, that's a driver implementation, but given that the bindings are for a generic mux device, the driver matters here. I'd be fine making ports optional and modifying the driver, or making them mandatory in DT, but I think it's important to at least synchronize the bindings and the driver.
On Fri, Mar 12, 2021 at 2:48 PM Laurent Pinchart <laurent.pinchart@ideasonboard.com> wrote: > > Hi Rob, > > On Fri, Mar 12, 2021 at 08:33:06AM -0700, Rob Herring wrote: > > On Fri, Mar 12, 2021 at 3:06 AM Laurent Pinchart wrote: > > > On Fri, Mar 12, 2021 at 09:29:04AM +0200, Sakari Ailus wrote: > > > > On Fri, Mar 12, 2021 at 03:25:11AM +0200, Laurent Pinchart wrote: > > > > > On Thu, Mar 11, 2021 at 04:40:42PM -0700, Rob Herring wrote: > > > > > > Now that we have the graph schema, convert the video-mux binding to DT > > > > > > schema. > > > > > > > > > > > > Cc: Sakari Ailus <sakari.ailus@linux.intel.com> > > > > > > Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > > > > > > Cc: Mauro Carvalho Chehab <mchehab@kernel.org> > > > > > > Cc: linux-media@vger.kernel.org > > > > > > Signed-off-by: Rob Herring <robh@kernel.org> > > > > > > --- > > > > > > .../devicetree/bindings/media/video-mux.txt | 60 ------------ > > > > > > .../devicetree/bindings/media/video-mux.yaml | 93 +++++++++++++++++++ > > > > > > 2 files changed, 93 insertions(+), 60 deletions(-) > > > > > > delete mode 100644 Documentation/devicetree/bindings/media/video-mux.txt > > > > > > create mode 100644 Documentation/devicetree/bindings/media/video-mux.yaml > > > > > > > > > > > > diff --git a/Documentation/devicetree/bindings/media/video-mux.txt b/Documentation/devicetree/bindings/media/video-mux.txt > > > > > > deleted file mode 100644 > > > > > > index 63b9dc913e45..000000000000 > > > > > > --- a/Documentation/devicetree/bindings/media/video-mux.txt > > > > > > +++ /dev/null > > > > > > @@ -1,60 +0,0 @@ > > > > > > -Video Multiplexer > > > > > > -================= > > > > > > - > > > > > > -Video multiplexers allow to select between multiple input ports. Video received > > > > > > -on the active input port is passed through to the output port. Muxes described > > > > > > -by this binding are controlled by a multiplexer controller that is described by > > > > > > -the bindings in Documentation/devicetree/bindings/mux/mux-controller.txt > > > > > > - > > > > > > -Required properties: > > > > > > -- compatible : should be "video-mux" > > > > > > -- mux-controls : mux controller node to use for operating the mux > > > > > > -- #address-cells: should be <1> > > > > > > -- #size-cells: should be <0> > > > > > > -- port@*: at least three port nodes containing endpoints connecting to the > > > > > > - source and sink devices according to of_graph bindings. The last port is > > > > > > - the output port, all others are inputs. > > > > > > - > > > > > > -Optionally, #address-cells, #size-cells, and port nodes can be grouped under a > > > > > > -ports node as described in Documentation/devicetree/bindings/graph.txt. > > > > > > - > > > > > > -Example: > > > > > > - > > > > > > - mux: mux-controller { > > > > > > - compatible = "gpio-mux"; > > > > > > - #mux-control-cells = <0>; > > > > > > - > > > > > > - mux-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; > > > > > > - }; > > > > > > - > > > > > > - video-mux { > > > > > > - compatible = "video-mux"; > > > > > > - mux-controls = <&mux>; > > > > > > - #address-cells = <1>; > > > > > > - #size-cells = <0>; > > > > > > - > > > > > > - port@0 { > > > > > > - reg = <0>; > > > > > > - > > > > > > - mux_in0: endpoint { > > > > > > - remote-endpoint = <&video_source0_out>; > > > > > > - }; > > > > > > - }; > > > > > > - > > > > > > - port@1 { > > > > > > - reg = <1>; > > > > > > - > > > > > > - mux_in1: endpoint { > > > > > > - remote-endpoint = <&video_source1_out>; > > > > > > - }; > > > > > > - }; > > > > > > - > > > > > > - port@2 { > > > > > > - reg = <2>; > > > > > > - > > > > > > - mux_out: endpoint { > > > > > > - remote-endpoint = <&capture_interface_in>; > > > > > > - }; > > > > > > - }; > > > > > > - }; > > > > > > -}; > > > > > > diff --git a/Documentation/devicetree/bindings/media/video-mux.yaml b/Documentation/devicetree/bindings/media/video-mux.yaml > > > > > > new file mode 100644 > > > > > > index 000000000000..780fbbd46a38 > > > > > > --- /dev/null > > > > > > +++ b/Documentation/devicetree/bindings/media/video-mux.yaml > > > > > > @@ -0,0 +1,93 @@ > > > > > > +# SPDX-License-Identifier: GPL-2.0 > > > > > > +%YAML 1.2 > > > > > > +--- > > > > > > +$id: http://devicetree.org/schemas/media/video-mux.yaml# > > > > > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > > > > > + > > > > > > +title: Video Multiplexer > > > > > > + > > > > > > +maintainers: > > > > > > + - Sakari Ailus <sakari.ailus@linux.intel.com> > > > > > > + - Laurent Pinchart <laurent.pinchart@ideasonboard.com> > > > > > > + > > > > > > +description: > > > > > > + Video multiplexers allow to select between multiple input ports. Video > > > > > > + received on the active input port is passed through to the output port. Muxes > > > > > > + described by this binding are controlled by a multiplexer controller. > > > > > > + > > > > > > +properties: > > > > > > + compatible: > > > > > > + const: video-mux > > > > > > + > > > > > > + mux-controls: > > > > > > + maxItems: 1 > > > > > > + > > > > > > + '#address-cells': > > > > > > + const: 1 > > > > > > + > > > > > > + '#size-cells': > > > > > > + const: 0 > > > > > > + > > > > > > + ports: > > > > > > + $ref: /schemas/graph.yaml#/properties/ports > > > > > > + > > > > > > + patternProperties: > > > > > > + '^port@': > > > > > > + $ref: /schemas/graph.yaml#/properties/port > > > > > > > > > > Should we require at least port@0, port@1 and port@2 ? > > > > > > > > > > > + > > > > > > +patternProperties: > > > > > > + '^port@': > > > > > > + $ref: /schemas/graph.yaml#/properties/port > > > > > > + description: > > > > > > + At least three port nodes containing endpoints connecting to the source > > > > > > + and sink devices according to of_graph bindings. The last port is the > > > > > > + output port, all others are inputs. > > > > > > + > > > > > > +required: > > > > > > + - compatible > > > > > > + - mux-controls > > > > > > > > > > Should a constraint be added to ensure that either a ports node or > > > > > port@0, port@1 and port@2 nodes exists ? > > > > > > > > It's not meaningful to have this device without such nodes. But a mux with > > > > more ports could be connected in a way that leaves one or both of ports 1 > > > > and 2 unconnected. It's still not a likely configuration but a possible > > > > one. > > > > > > Those ports wouldn't be connected, but they could still exist in DT. > > > > Could or must? I think we could have both cases. If there's never a > > connection on a board no point in having the node there. If there's a > > possible connection (via a connector and overlay), then we may want > > the node. > > I tend to treat ports as mandatory and endpoints as optional, as the > former describe a intrinsic property of the device and the latter a > connection in a specific system. > > Looking at the video-mux driver, it first finds the number of the last > port, and then creates N V4L2 subdev pads, regardless of whether a port > exists for it. There's thus an implicit assumption that ports will be > numbered 0 to N-1 and will all exist. If a port doesn't exist in DT, the > driver should still operate correctly as far as I can tell, but it will > in any case create N pads. > > Now, that's a driver implementation, but given that the bindings are for > a generic mux device, the driver matters here. I'd be fine making ports > optional and modifying the driver, or making them mandatory in DT, but I > think it's important to at least synchronize the bindings and the > driver. I guess we can always loosen the constraints if the need arises, so I've made the port nodes required and applied: diff --git a/Documentation/devicetree/bindings/media/video-mux.yaml b/Documentation/devicetree/bindings/media/video-mux.yaml index 780fbbd46a38..2f28a7dad93f 100644 --- a/Documentation/devicetree/bindings/media/video-mux.yaml +++ b/Documentation/devicetree/bindings/media/video-mux.yaml @@ -35,6 +35,11 @@ properties: '^port@': $ref: /schemas/graph.yaml#/properties/port + required: + - port@0 + - port@1 + - port@2 + patternProperties: '^port@': $ref: /schemas/graph.yaml#/properties/port @@ -47,6 +52,14 @@ required: - compatible - mux-controls +oneOf: + - required: + - ports + - required: + - port@0 + - port@1 + - port@2 + additionalProperties: false examples:
diff --git a/Documentation/devicetree/bindings/media/video-mux.txt b/Documentation/devicetree/bindings/media/video-mux.txt deleted file mode 100644 index 63b9dc913e45..000000000000 --- a/Documentation/devicetree/bindings/media/video-mux.txt +++ /dev/null @@ -1,60 +0,0 @@ -Video Multiplexer -================= - -Video multiplexers allow to select between multiple input ports. Video received -on the active input port is passed through to the output port. Muxes described -by this binding are controlled by a multiplexer controller that is described by -the bindings in Documentation/devicetree/bindings/mux/mux-controller.txt - -Required properties: -- compatible : should be "video-mux" -- mux-controls : mux controller node to use for operating the mux -- #address-cells: should be <1> -- #size-cells: should be <0> -- port@*: at least three port nodes containing endpoints connecting to the - source and sink devices according to of_graph bindings. The last port is - the output port, all others are inputs. - -Optionally, #address-cells, #size-cells, and port nodes can be grouped under a -ports node as described in Documentation/devicetree/bindings/graph.txt. - -Example: - - mux: mux-controller { - compatible = "gpio-mux"; - #mux-control-cells = <0>; - - mux-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; - }; - - video-mux { - compatible = "video-mux"; - mux-controls = <&mux>; - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - mux_in0: endpoint { - remote-endpoint = <&video_source0_out>; - }; - }; - - port@1 { - reg = <1>; - - mux_in1: endpoint { - remote-endpoint = <&video_source1_out>; - }; - }; - - port@2 { - reg = <2>; - - mux_out: endpoint { - remote-endpoint = <&capture_interface_in>; - }; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/media/video-mux.yaml b/Documentation/devicetree/bindings/media/video-mux.yaml new file mode 100644 index 000000000000..780fbbd46a38 --- /dev/null +++ b/Documentation/devicetree/bindings/media/video-mux.yaml @@ -0,0 +1,93 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/video-mux.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Video Multiplexer + +maintainers: + - Sakari Ailus <sakari.ailus@linux.intel.com> + - Laurent Pinchart <laurent.pinchart@ideasonboard.com> + +description: + Video multiplexers allow to select between multiple input ports. Video + received on the active input port is passed through to the output port. Muxes + described by this binding are controlled by a multiplexer controller. + +properties: + compatible: + const: video-mux + + mux-controls: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + patternProperties: + '^port@': + $ref: /schemas/graph.yaml#/properties/port + +patternProperties: + '^port@': + $ref: /schemas/graph.yaml#/properties/port + description: + At least three port nodes containing endpoints connecting to the source + and sink devices according to of_graph bindings. The last port is the + output port, all others are inputs. + +required: + - compatible + - mux-controls + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + mux: mux-controller { + compatible = "gpio-mux"; + #mux-control-cells = <0>; + + mux-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; + }; + + video-mux { + compatible = "video-mux"; + mux-controls = <&mux>; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mux_in0: endpoint { + remote-endpoint = <&video_source0_out>; + }; + }; + + port@1 { + reg = <1>; + + mux_in1: endpoint { + remote-endpoint = <&video_source1_out>; + }; + }; + + port@2 { + reg = <2>; + + mux_out: endpoint { + remote-endpoint = <&capture_interface_in>; + }; + }; + }; +...