[2/3] pcm990-baseboard: don't use pxa_camera init() callback

  pxa_camera init() is going to be removed.
Configure PXA CIF pins directly in machine init function.

Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
---
 arch/arm/mach-pxa/pcm990-baseboard.c |    8 +-------
 1 files changed, 1 insertions(+), 7 deletions(-)
  

On Tue, 17 Nov 2009, Antonio Ospite wrote:

> pxa_camera init() is going to be removed.
> Configure PXA CIF pins directly in machine init function.

Same comment as to patch 1/3.

> 
> Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>

Even though the change seems obvious, it better be tested - in case 
someone reconfigures camera pins somewhere after 
pcm990_baseboard_init()... Juergen, would you be able to test it?

Thanks
Guennadi

> ---
>  arch/arm/mach-pxa/pcm990-baseboard.c |    8 +-------
>  1 files changed, 1 insertions(+), 7 deletions(-)
> 
> diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
> index bbda570..d5255ae 100644
> --- a/arch/arm/mach-pxa/pcm990-baseboard.c
> +++ b/arch/arm/mach-pxa/pcm990-baseboard.c
> @@ -359,19 +359,12 @@ static unsigned long pcm990_camera_pin_config[] = {
>  	GPIO44_CIF_LV,
>  };
>  
> -static int pcm990_pxacamera_init(struct device *dev)
> -{
> -	pxa2xx_mfp_config(ARRAY_AND_SIZE(pcm990_camera_pin_config));
> -	return 0;
> -}
> -
>  /*
>   * CICR4: PCLK_EN:	Pixel clock is supplied by the sensor
>   *	MCLK_EN:	Master clock is generated by PXA
>   *	PCP:		Data sampled on the falling edge of pixel clock
>   */
>  struct pxacamera_platform_data pcm990_pxacamera_platform_data = {
> -	.init	= pcm990_pxacamera_init,
>  	.flags  = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 | PXA_CAMERA_DATAWIDTH_10 |
>  		PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN/* | PXA_CAMERA_PCP*/,
>  	.mclk_10khz = 1000,
> @@ -532,6 +525,7 @@ void __init pcm990_baseboard_init(void)
>  	pxa_set_ac97_info(NULL);
>  
>  #if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE)
> +	pxa2xx_mfp_config(ARRAY_AND_SIZE(pcm990_camera_pin_config));
>  	pxa_set_camera_info(&pcm990_pxacamera_platform_data);
>  
>  	i2c_register_board_info(0, ARRAY_AND_SIZE(pcm990_i2c_devices));
> -- 
> 1.6.5.2
> 

---
Guennadi Liakhovetski, Ph.D.
Freelance Open-Source Software Developer
http://www.open-technology.de/
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
  

On Mittwoch, 18. November 2009, Guennadi Liakhovetski wrote:
> On Tue, 17 Nov 2009, Antonio Ospite wrote:
> > pxa_camera init() is going to be removed.
> > Configure PXA CIF pins directly in machine init function.
>
> Same comment as to patch 1/3.
>
> > Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
>
> Even though the change seems obvious, it better be tested - in case
> someone reconfigures camera pins somewhere after
> pcm990_baseboard_init()... Juergen, would you be able to test it?

Lets see, if I can grab some hardware.

jbe