On 27 June 2009 12:09:20 O&M Ugarcina wrote:
> Hello Igor ,
>
> I want to thank you for making those patches available . I have been
> able to patch the latest HG pull and to compile and install the drivers
> . I decided to install the whole lot as it was a bit hard to workout
> just the ko's responsible for the S350 . After installing the card I
> have this from dmesg :
>
> saa7130/34: v4l2 driver version 0.2.15 loaded
> saa7134 0000:04:01.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
> saa7130[0]: found at 0000:04:01.0, rev: 1, irq: 22, latency: 64, mmio:
> 0xfeaffc00
> saa7130[0]: subsystem: 185b:c900, board: Compro VideoMate S350/S300
> [card=169,autodetected]
> saa7130[0]: board init: gpio is 843f00
> input: saa7134 IR (Compro VideoMate S3 as
> /devices/pci0000:00/0000:00:1e.0/0000:04:01.0/input/input5
> iTCO_vendor_support: vendor-support=0
> iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
> iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2, TCOBASE=0x0860)
> iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
> parport_pc 00:0b: reported by Plug and Play ACPI
> parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
> saa7130[0]: i2c eeprom 00: 5b 18 00 c9 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
> saa7130[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff ff ff ff ff ff ff ff ff ff
> saa7130[0]: i2c eeprom 20: 01 40 01 02 02 01 03 01 08 ff 00 87 ff ff ff ff
> saa7130[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7130[0]: i2c eeprom 40: ff d6 00 c0 86 1c 02 01 02 ff ff ff ff ff ff ff
> saa7130[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff cb
> saa7130[0]: i2c eeprom 60: 30 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7130[0]: i2c eeprom 70: 00 00 00 10 03 9c ff ff ff ff ff ff ff ff ff ff
> saa7130[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7130[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7130[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7130[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7130[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7130[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7130[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7130[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7130[0]: registered device video0 [v4l2]
> saa7130[0]: registered device vbi0
> i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
> i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI region
> SMRG [0x400-0x40f]
> ACPI: Device needs an ACPI driver
> ppdev: user-space parallel port driver
> dvb_init() allocating 1 frontend
> HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
> HDA Intel 0000:00:1b.0: setting latency timer to 64
> cx88/0: cx2388x v4l2 driver version 0.0.7 loaded
> cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.7 loaded
> DVB: registering new adapter (saa7130[0])
> DVB: registering adapter 0 frontend 0 (Zarlink ZL10313 DVB-S).
>
>
> I was able to tune into my favourite satellite with mythtv with no
> problems . I also was able to tune to another satellite using the mythtv
> configuration for 4 way diseqc . So 4 way diseqc works fine for me .
> Picture is satble and very good , sound also is ok . I will just run it
> now to see how the system stability is over a longer period of time .
>
> One small issue I have noticed : and that is in mythtv the signal
> strength indicator shows very low with S350 now . Before I was getting
> with TT1500S around 79 to 89% while now with S350 I see about 18% for
> the same channel .
It is not about more or less sensitivity, it is about how to represent :(
I have positive reports about Compro S350 in russian also.
http://forum.free-x.de/wbb/index.php?page=Thread&threadID=474
I will try to push :)
>
> Best Regards
>
> Milorad
Best Regards
Igor
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
# HG changeset patch
# User Igor M. Liplianin <liplianin@me.by>
# Date 1245768974 -10800
# Node ID 170087b85e38857ab2ce629777ce4adb548c42b6
# Parent ae94525150167d61862a860b92a03dcb0f1c584b
Add support for Compro VideoMate S350 DVB-S PCI card.
From: Igor M. Liplianin <liplianin@me.by>
Add Compro VideoMate S350 DVB-S driver.
The card uses zl10313, zl10039, saa7130 integrated circuits.
Signed-off-by: Igor M. Liplianin <liplianin@me.by>
@@ -2823,3 +2823,51 @@
[0x13] = KEY_CAMERA,
};
EXPORT_SYMBOL_GPL(ir_codes_evga_indtube);
+
+IR_KEYTAB_TYPE ir_codes_videomate_s350[IR_KEYTAB_SIZE] = {
+ [0x00] = KEY_TV,
+ [0x01] = KEY_DVD,
+ [0x04] = KEY_RECORD,
+ [0x05] = KEY_VIDEO, /* TV/Video */
+ [0x07] = KEY_STOP,
+ [0x08] = KEY_PLAYPAUSE,
+ [0x0a] = KEY_REWIND,
+ [0x0f] = KEY_FASTFORWARD,
+ [0x10] = KEY_CHANNELUP,
+ [0x12] = KEY_VOLUMEUP,
+ [0x13] = KEY_CHANNELDOWN,
+ [0x14] = KEY_MUTE,
+ [0x15] = KEY_VOLUMEDOWN,
+ [0x16] = KEY_1,
+ [0x17] = KEY_2,
+ [0x18] = KEY_3,
+ [0x19] = KEY_4,
+ [0x1a] = KEY_5,
+ [0x1b] = KEY_6,
+ [0x1c] = KEY_7,
+ [0x1d] = KEY_8,
+ [0x1e] = KEY_9,
+ [0x1f] = KEY_0,
+ [0x21] = KEY_SLEEP,
+ [0x24] = KEY_ZOOM,
+ [0x25] = KEY_LAST, /* Recall */
+ [0x26] = KEY_SUBTITLE, /* CC */
+ [0x27] = KEY_LANGUAGE, /* MTS */
+ [0x29] = KEY_CHANNEL, /* SURF */
+ [0x2b] = KEY_A,
+ [0x2c] = KEY_B,
+ [0x2f] = KEY_SHUFFLE, /* Snapshot */
+ [0x23] = KEY_RADIO,
+ [0x02] = KEY_PREVIOUSSONG,
+ [0x06] = KEY_NEXTSONG,
+ [0x03] = KEY_EPG,
+ [0x09] = KEY_SETUP,
+ [0x22] = KEY_BACKSPACE,
+ [0x0c] = KEY_UP,
+ [0x0e] = KEY_DOWN,
+ [0x0b] = KEY_LEFT,
+ [0x0d] = KEY_RIGHT,
+ [0x11] = KEY_ENTER,
+ [0x20] = KEY_TEXT,
+};
+EXPORT_SYMBOL_GPL(ir_codes_videomate_s350);
@@ -47,6 +47,7 @@
select DVB_TDA10048 if !DVB_FE_CUSTOMISE
select MEDIA_TUNER_TDA18271 if !MEDIA_TUNER_CUSTOMISE
select MEDIA_TUNER_TDA8290 if !MEDIA_TUNER_CUSTOMISE
+ select DVB_ZL10039 if !DVB_FE_CUSTOMISE
---help---
This adds support for DVB cards based on the
Philips saa7134 chip.
@@ -5155,6 +5155,25 @@
.gpio = 0x00,
},
},
+ [SAA7134_BOARD_VIDEOMATE_S350] = {
+ /* Jan D. Louw <jd.louw@mweb.co.za */
+ .name = "Compro VideoMate S350/S300",
+ .audio_clock = 0x00187de7,
+ .tuner_type = TUNER_ABSENT,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .mpeg = SAA7134_MPEG_DVB,
+ .inputs = { {
+ .name = name_comp1,
+ .vmux = 0,
+ .amux = LINE1,
+ }, {
+ .name = name_svideo,
+ .vmux = 8, /* Not tested */
+ .amux = LINE1
+ } },
+ },
};
const unsigned int saa7134_bcount = ARRAY_SIZE(saa7134_boards);
@@ -6262,7 +6281,12 @@
.subvendor = 0x1461, /* Avermedia Technologies Inc */
.subdevice = 0xf31d,
.driver_data = SAA7134_BOARD_AVERMEDIA_GO_007_FM_PLUS,
-
+ }, {
+ .vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7130,
+ .subvendor = 0x185b,
+ .subdevice = 0xc900,
+ .driver_data = SAA7134_BOARD_VIDEOMATE_S350,
}, {
/* --- boards without eeprom + subsystem ID --- */
.vendor = PCI_VENDOR_ID_PHILIPS,
@@ -6776,6 +6800,11 @@
saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x80040100, 0x80040100);
saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x80040100, 0x00040100);
break;
+ case SAA7134_BOARD_VIDEOMATE_S350:
+ dev->has_remote = SAA7134_REMOTE_GPIO;
+ saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x00008000, 0x00008000);
+ saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x00008000, 0x00008000);
+ break;
}
return 0;
}
@@ -56,6 +56,7 @@
#include "zl10353.h"
#include "zl10036.h"
+#include "zl10039.h"
#include "mt312.h"
MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
@@ -968,6 +969,10 @@
.tuner_address = 0x60,
};
+static struct mt312_config zl10313_compro_s350_config = {
+ .demod_address = 0x0e,
+};
+
static struct lgdt3305_config hcw_lgdt3305_config = {
.i2c_addr = 0x0e,
.mpeg_mode = LGDT3305_MPEG_SERIAL,
@@ -1477,6 +1482,16 @@
}
}
break;
+ case SAA7134_BOARD_VIDEOMATE_S350:
+ fe0->dvb.frontend = dvb_attach(mt312_attach,
+ &zl10313_compro_s350_config, &dev->i2c_adap);
+ if (fe0->dvb.frontend)
+ if (dvb_attach(zl10039_attach, fe0->dvb.frontend,
+ 0x60, &dev->i2c_adap) == NULL)
+ wprintk("%s: No zl10039 found!\n",
+ __func__);
+
+ break;
default:
wprintk("Huh? unknown DVB card?\n");
break;
@@ -646,6 +646,11 @@
mask_keycode = 0x7f;
polling = 40; /* ms */
break;
+ case SAA7134_BOARD_VIDEOMATE_S350:
+ ir_codes = ir_codes_videomate_s350;
+ mask_keycode = 0x003f00;
+ mask_keydown = 0x040000;
+ break;
}
if (NULL == ir_codes) {
printk("%s: Oops: IR config error [card=%d]\n",
@@ -293,6 +293,7 @@
#define SAA7134_BOARD_BEHOLD_607RDS_MK5 166
#define SAA7134_BOARD_BEHOLD_609RDS_MK3 167
#define SAA7134_BOARD_BEHOLD_609RDS_MK5 168
+#define SAA7134_BOARD_VIDEOMATE_S350 169
#define SAA7134_MAXBOARDS 32
#define SAA7134_INPUT_MAX 8
@@ -163,6 +163,7 @@
extern IR_KEYTAB_TYPE ir_codes_kaiomy[IR_KEYTAB_SIZE];
extern IR_KEYTAB_TYPE ir_codes_dm1105_nec[IR_KEYTAB_SIZE];
extern IR_KEYTAB_TYPE ir_codes_evga_indtube[IR_KEYTAB_SIZE];
+extern IR_KEYTAB_TYPE ir_codes_videomate_s350[IR_KEYTAB_SIZE];
#endif