media: dt-bindings: rcar_vin: Document RZ/G1 per-board settings
Commit Message
The R-Car Gen2 per-board settings apply to RZ/G1, too.
Fixes: 1d14a5eaa156b0b3 ("media: dt-bindings: media: rcar_vin: add device tree support for r8a774[35]")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
Documentation/devicetree/bindings/media/renesas,vin.txt | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
Comments
Hi Geert,
Thanks for your work.
On 2019-10-24 15:14:23 +0200, Geert Uytterhoeven wrote:
> The R-Car Gen2 per-board settings apply to RZ/G1, too.
>
> Fixes: 1d14a5eaa156b0b3 ("media: dt-bindings: media: rcar_vin: add device tree support for r8a774[35]")
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> ---
> Documentation/devicetree/bindings/media/renesas,vin.txt | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/media/renesas,vin.txt b/Documentation/devicetree/bindings/media/renesas,vin.txt
> index aa217b0962797712..221fcc416d1ac598 100644
> --- a/Documentation/devicetree/bindings/media/renesas,vin.txt
> +++ b/Documentation/devicetree/bindings/media/renesas,vin.txt
> @@ -43,7 +43,7 @@ on Gen3 and RZ/G2 platforms to a CSI-2 receiver.
> Additionally, an alias named vinX will need to be created to specify
> which video input device this is.
>
> -The per-board settings Gen2 platforms:
> +The per-board settings for Gen2 and RZ/G1 platforms:
>
> - port - sub-node describing a single endpoint connected to the VIN
> from external SoC pins as described in video-interfaces.txt[1].
> @@ -63,7 +63,7 @@ The per-board settings Gen2 platforms:
> - data-enable-active: polarity of CLKENB signal, see [1] for
> description. Default is active high.
>
> -The per-board settings Gen3 and RZ/G2 platforms:
> +The per-board settings for Gen3 and RZ/G2 platforms:
>
> Gen3 and RZ/G2 platforms can support both a single connected parallel input
> source from external SoC pins (port@0) and/or multiple parallel input sources
> --
> 2.17.1
>
On Thu, 24 Oct 2019 15:14:23 +0200, Geert Uytterhoeven wrote:
> The R-Car Gen2 per-board settings apply to RZ/G1, too.
>
> Fixes: 1d14a5eaa156b0b3 ("media: dt-bindings: media: rcar_vin: add device tree support for r8a774[35]")
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
> ---
> Documentation/devicetree/bindings/media/renesas,vin.txt | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
Acked-by: Rob Herring <robh@kernel.org>
@@ -43,7 +43,7 @@ on Gen3 and RZ/G2 platforms to a CSI-2 receiver.
Additionally, an alias named vinX will need to be created to specify
which video input device this is.
-The per-board settings Gen2 platforms:
+The per-board settings for Gen2 and RZ/G1 platforms:
- port - sub-node describing a single endpoint connected to the VIN
from external SoC pins as described in video-interfaces.txt[1].
@@ -63,7 +63,7 @@ The per-board settings Gen2 platforms:
- data-enable-active: polarity of CLKENB signal, see [1] for
description. Default is active high.
-The per-board settings Gen3 and RZ/G2 platforms:
+The per-board settings for Gen3 and RZ/G2 platforms:
Gen3 and RZ/G2 platforms can support both a single connected parallel input
source from external SoC pins (port@0) and/or multiple parallel input sources