media: imx7.rst: Fix the references to the CSI multiplexer
Commit Message
In imx7s.dtsi the node name for the CSI multiplexer is "csi-mux", not
"csi_mux", so fix all the references in the document.
This fixes the following error when the instructions are followed:
# media-ctl -l "'imx7-mipi-csis.0':1 -> 'csi_mux':1[1]"
Unable to parse link: Invalid argument (22)
While at it, provide the "media-ctl -p" output from 5.2 kernel
version, so that users can see a more updated output.
Fixes: fa88fbdafb4a ("media: imx7.rst: add documentation for i.MX7 media driver")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
---
Documentation/media/v4l-drivers/imx7.rst | 127 +++++++++++------------
1 file changed, 63 insertions(+), 64 deletions(-)
Comments
Oi Fabio,
On Sat 29 Jun 2019 at 13:16, Fabio Estevam wrote:
> In imx7s.dtsi the node name for the CSI multiplexer is "csi-mux", not
> "csi_mux", so fix all the references in the document.
>
> This fixes the following error when the instructions are followed:
>
> # media-ctl -l "'imx7-mipi-csis.0':1 -> 'csi_mux':1[1]"
> Unable to parse link: Invalid argument (22)
Yeah, it was a last minute rename that did not reflect in the
documentation.
>
> While at it, provide the "media-ctl -p" output from 5.2 kernel
> version, so that users can see a more updated output.
Also thanks for this.
>
> Fixes: fa88fbdafb4a ("media: imx7.rst: add documentation for i.MX7 media driver")
> Signed-off-by: Fabio Estevam <festevam@gmail.com>
>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
---
Cheers,
Rui
>
> ---
> Documentation/media/v4l-drivers/imx7.rst | 127 +++++++++++------------
> 1 file changed, 63 insertions(+), 64 deletions(-)
>
> diff --git a/Documentation/media/v4l-drivers/imx7.rst b/Documentation/media/v4l-drivers/imx7.rst
> index fe411f65c01c..ab9e17d111bf 100644
> --- a/Documentation/media/v4l-drivers/imx7.rst
> +++ b/Documentation/media/v4l-drivers/imx7.rst
> @@ -41,7 +41,7 @@ data from MIPI CSI-2 camera sensor. It has one source pad, corresponding to the
> virtual channel 0. This module is compliant to previous version of Samsung
> D-phy, and supports two D-PHY Rx Data lanes.
>
> -csi_mux
> +csi-mux
> -------
>
> This is the video multiplexer. It has two sink pads to select from either camera
> @@ -56,7 +56,7 @@ can interface directly with Parallel and MIPI CSI-2 buses. It has 256 x 64 FIFO
> to store received image pixel data and embedded DMA controllers to transfer data
> from the FIFO through AHB bus.
>
> -This entity has one sink pad that receives from the csi_mux entity and a single
> +This entity has one sink pad that receives from the csi-mux entity and a single
> source pad that routes video frames directly to memory buffers. This pad is
> routed to a capture device node.
>
> @@ -81,14 +81,14 @@ an output of 800x600, and BGGR 10 bit bayer format:
>
> # Setup links
> media-ctl -l "'ov2680 1-0036':0 -> 'imx7-mipi-csis.0':0[1]"
> - media-ctl -l "'imx7-mipi-csis.0':1 -> 'csi_mux':1[1]"
> - media-ctl -l "'csi_mux':2 -> 'csi':0[1]"
> + media-ctl -l "'imx7-mipi-csis.0':1 -> 'csi-mux':1[1]"
> + media-ctl -l "'csi-mux':2 -> 'csi':0[1]"
> media-ctl -l "'csi':1 -> 'csi capture':0[1]"
>
> # Configure pads for pipeline
> media-ctl -V "'ov2680 1-0036':0 [fmt:SBGGR10_1X10/800x600 field:none]"
> - media-ctl -V "'csi_mux':1 [fmt:SBGGR10_1X10/800x600 field:none]"
> - media-ctl -V "'csi_mux':2 [fmt:SBGGR10_1X10/800x600 field:none]"
> + media-ctl -V "'csi-mux':1 [fmt:SBGGR10_1X10/800x600 field:none]"
> + media-ctl -V "'csi-mux':2 [fmt:SBGGR10_1X10/800x600 field:none]"
> media-ctl -V "'imx7-mipi-csis.0':0 [fmt:SBGGR10_1X10/800x600 field:none]"
> media-ctl -V "'csi':0 [fmt:SBGGR10_1X10/800x600 field:none]"
>
> @@ -97,64 +97,63 @@ the resolutions supported by the sensor.
>
> .. code-block:: none
>
> - root@imx7s-warp:~# media-ctl -p
> - Media controller API version 4.17.0
> -
> - Media device information
> - ------------------------
> - driver imx-media
> - model imx-media
> - serial
> - bus info
> - hw revision 0x0
> - driver version 4.17.0
> -
> - Device topology
> - - entity 1: csi (2 pads, 2 links)
> - type V4L2 subdev subtype Unknown flags 0
> - device node name /dev/v4l-subdev0
> - pad0: Sink
> - [fmt:SBGGR10_1X10/800x600 field:none]
> - <- "csi_mux":2 [ENABLED]
> - pad1: Source
> - [fmt:SBGGR10_1X10/800x600 field:none]
> - -> "csi capture":0 [ENABLED]
> -
> - - entity 4: csi capture (1 pad, 1 link)
> - type Node subtype V4L flags 0
> - device node name /dev/video0
> - pad0: Sink
> - <- "csi":1 [ENABLED]
> -
> - - entity 10: csi_mux (3 pads, 2 links)
> - type V4L2 subdev subtype Unknown flags 0
> - device node name /dev/v4l-subdev1
> - pad0: Sink
> - [fmt:unknown/0x0]
> - pad1: Sink
> - [fmt:unknown/800x600 field:none]
> - <- "imx7-mipi-csis.0":1 [ENABLED]
> - pad2: Source
> - [fmt:unknown/800x600 field:none]
> - -> "csi":0 [ENABLED]
> -
> - - entity 14: imx7-mipi-csis.0 (2 pads, 2 links)
> - type V4L2 subdev subtype Unknown flags 0
> - device node name /dev/v4l-subdev2
> - pad0: Sink
> - [fmt:SBGGR10_1X10/800x600 field:none]
> - <- "ov2680 1-0036":0 [ENABLED]
> - pad1: Source
> - [fmt:SBGGR10_1X10/800x600 field:none]
> - -> "csi_mux":1 [ENABLED]
> -
> - - entity 17: ov2680 1-0036 (1 pad, 1 link)
> - type V4L2 subdev subtype Sensor flags 0
> - device node name /dev/v4l-subdev3
> - pad0: Source
> - [fmt:SBGGR10_1X10/800x600 field:none]
> - -> "imx7-mipi-csis.0":0 [ENABLED]
> -
> +# media-ctl -p
> +Media controller API version 5.2.0
> +
> +Media device information
> +------------------------
> +driver imx7-csi
> +model imx-media
> +serial
> +bus info
> +hw revision 0x0
> +driver version 5.2.0
> +
> +Device topology
> +- entity 1: csi (2 pads, 2 links)
> + type V4L2 subdev subtype Unknown flags 0
> + device node name /dev/v4l-subdev0
> + pad0: Sink
> + [fmt:SBGGR10_1X10/800x600 field:none colorspace:srgb xfer:srgb ycbcr:601 quantization:full-range]
> + <- "csi-mux":2 [ENABLED]
> + pad1: Source
> + [fmt:SBGGR10_1X10/800x600 field:none colorspace:srgb xfer:srgb ycbcr:601 quantization:full-range]
> + -> "csi capture":0 [ENABLED]
> +
> +- entity 4: csi capture (1 pad, 1 link)
> + type Node subtype V4L flags 0
> + device node name /dev/video0
> + pad0: Sink
> + <- "csi":1 [ENABLED]
> +
> +- entity 10: csi-mux (3 pads, 2 links)
> + type V4L2 subdev subtype Unknown flags 0
> + device node name /dev/v4l-subdev1
> + pad0: Sink
> + [fmt:Y8_1X8/1x1 field:none]
> + pad1: Sink
> + [fmt:SBGGR10_1X10/800x600 field:none]
> + <- "imx7-mipi-csis.0":1 [ENABLED]
> + pad2: Source
> + [fmt:SBGGR10_1X10/800x600 field:none]
> + -> "csi":0 [ENABLED]
> +
> +- entity 14: imx7-mipi-csis.0 (2 pads, 2 links)
> + type V4L2 subdev subtype Unknown flags 0
> + device node name /dev/v4l-subdev2
> + pad0: Sink
> + [fmt:SBGGR10_1X10/800x600 field:none]
> + <- "ov2680 1-0036":0 [ENABLED]
> + pad1: Source
> + [fmt:SBGGR10_1X10/800x600 field:none]
> + -> "csi-mux":1 [ENABLED]
> +
> +- entity 17: ov2680 1-0036 (1 pad, 1 link)
> + type V4L2 subdev subtype Sensor flags 0
> + device node name /dev/v4l-subdev3
> + pad0: Source
> + [fmt:SBGGR10_1X10/800x600@1/30 field:none colorspace:srgb]
> + -> "imx7-mipi-csis.0":0 [ENABLED]
>
> References
> ----------
Em Sat, 29 Jun 2019 09:16:23 -0300
Fabio Estevam <festevam@gmail.com> escreveu:
> In imx7s.dtsi the node name for the CSI multiplexer is "csi-mux", not
> "csi_mux", so fix all the references in the document.
>
> This fixes the following error when the instructions are followed:
>
> # media-ctl -l "'imx7-mipi-csis.0':1 -> 'csi_mux':1[1]"
> Unable to parse link: Invalid argument (22)
>
> While at it, provide the "media-ctl -p" output from 5.2 kernel
> version, so that users can see a more updated output.
>
> Fixes: fa88fbdafb4a ("media: imx7.rst: add documentation for i.MX7 media driver")
> Signed-off-by: Fabio Estevam <festevam@gmail.com>
> ---
> Documentation/media/v4l-drivers/imx7.rst | 127 +++++++++++------------
> 1 file changed, 63 insertions(+), 64 deletions(-)
>
> diff --git a/Documentation/media/v4l-drivers/imx7.rst b/Documentation/media/v4l-drivers/imx7.rst
> index fe411f65c01c..ab9e17d111bf 100644
> --- a/Documentation/media/v4l-drivers/imx7.rst
> +++ b/Documentation/media/v4l-drivers/imx7.rst
> @@ -41,7 +41,7 @@ data from MIPI CSI-2 camera sensor. It has one source pad, corresponding to the
> virtual channel 0. This module is compliant to previous version of Samsung
> D-phy, and supports two D-PHY Rx Data lanes.
>
> -csi_mux
> +csi-mux
> -------
>
> This is the video multiplexer. It has two sink pads to select from either camera
> @@ -56,7 +56,7 @@ can interface directly with Parallel and MIPI CSI-2 buses. It has 256 x 64 FIFO
> to store received image pixel data and embedded DMA controllers to transfer data
> from the FIFO through AHB bus.
>
> -This entity has one sink pad that receives from the csi_mux entity and a single
> +This entity has one sink pad that receives from the csi-mux entity and a single
> source pad that routes video frames directly to memory buffers. This pad is
> routed to a capture device node.
>
> @@ -81,14 +81,14 @@ an output of 800x600, and BGGR 10 bit bayer format:
>
> # Setup links
> media-ctl -l "'ov2680 1-0036':0 -> 'imx7-mipi-csis.0':0[1]"
> - media-ctl -l "'imx7-mipi-csis.0':1 -> 'csi_mux':1[1]"
> - media-ctl -l "'csi_mux':2 -> 'csi':0[1]"
> + media-ctl -l "'imx7-mipi-csis.0':1 -> 'csi-mux':1[1]"
> + media-ctl -l "'csi-mux':2 -> 'csi':0[1]"
> media-ctl -l "'csi':1 -> 'csi capture':0[1]"
>
> # Configure pads for pipeline
> media-ctl -V "'ov2680 1-0036':0 [fmt:SBGGR10_1X10/800x600 field:none]"
> - media-ctl -V "'csi_mux':1 [fmt:SBGGR10_1X10/800x600 field:none]"
> - media-ctl -V "'csi_mux':2 [fmt:SBGGR10_1X10/800x600 field:none]"
> + media-ctl -V "'csi-mux':1 [fmt:SBGGR10_1X10/800x600 field:none]"
> + media-ctl -V "'csi-mux':2 [fmt:SBGGR10_1X10/800x600 field:none]"
> media-ctl -V "'imx7-mipi-csis.0':0 [fmt:SBGGR10_1X10/800x600 field:none]"
> media-ctl -V "'csi':0 [fmt:SBGGR10_1X10/800x600 field:none]"
>
> @@ -97,64 +97,63 @@ the resolutions supported by the sensor.
>
> .. code-block:: none
>
> - root@imx7s-warp:~# media-ctl -p
> - Media controller API version 4.17.0
> -
> - Media device information
> - ------------------------
> - driver imx-media
> - model imx-media
> - serial
> - bus info
> - hw revision 0x0
> - driver version 4.17.0
> -
> - Device topology
> - - entity 1: csi (2 pads, 2 links)
> - type V4L2 subdev subtype Unknown flags 0
> - device node name /dev/v4l-subdev0
> - pad0: Sink
> - [fmt:SBGGR10_1X10/800x600 field:none]
> - <- "csi_mux":2 [ENABLED]
> - pad1: Source
> - [fmt:SBGGR10_1X10/800x600 field:none]
> - -> "csi capture":0 [ENABLED]
> -
> - - entity 4: csi capture (1 pad, 1 link)
> - type Node subtype V4L flags 0
> - device node name /dev/video0
> - pad0: Sink
> - <- "csi":1 [ENABLED]
> -
> - - entity 10: csi_mux (3 pads, 2 links)
> - type V4L2 subdev subtype Unknown flags 0
> - device node name /dev/v4l-subdev1
> - pad0: Sink
> - [fmt:unknown/0x0]
> - pad1: Sink
> - [fmt:unknown/800x600 field:none]
> - <- "imx7-mipi-csis.0":1 [ENABLED]
> - pad2: Source
> - [fmt:unknown/800x600 field:none]
> - -> "csi":0 [ENABLED]
> -
> - - entity 14: imx7-mipi-csis.0 (2 pads, 2 links)
> - type V4L2 subdev subtype Unknown flags 0
> - device node name /dev/v4l-subdev2
> - pad0: Sink
> - [fmt:SBGGR10_1X10/800x600 field:none]
> - <- "ov2680 1-0036":0 [ENABLED]
> - pad1: Source
> - [fmt:SBGGR10_1X10/800x600 field:none]
> - -> "csi_mux":1 [ENABLED]
> -
> - - entity 17: ov2680 1-0036 (1 pad, 1 link)
> - type V4L2 subdev subtype Sensor flags 0
> - device node name /dev/v4l-subdev3
> - pad0: Source
> - [fmt:SBGGR10_1X10/800x600 field:none]
> - -> "imx7-mipi-csis.0":0 [ENABLED]
> -
> +# media-ctl -p
> +Media controller API version 5.2.0
> +
> +Media device information
> +------------------------
> +driver imx7-csi
> +model imx-media
> +serial
> +bus info
> +hw revision 0x0
> +driver version 5.2.0
> +
> +Device topology
> +- entity 1: csi (2 pads, 2 links)
> + type V4L2 subdev subtype Unknown flags 0
> + device node name /dev/v4l-subdev0
> + pad0: Sink
> + [fmt:SBGGR10_1X10/800x600 field:none colorspace:srgb xfer:srgb ycbcr:601 quantization:full-range]
> + <- "csi-mux":2 [ENABLED]
> + pad1: Source
> + [fmt:SBGGR10_1X10/800x600 field:none colorspace:srgb xfer:srgb ycbcr:601 quantization:full-range]
> + -> "csi capture":0 [ENABLED]
> +
> +- entity 4: csi capture (1 pad, 1 link)
> + type Node subtype V4L flags 0
> + device node name /dev/video0
> + pad0: Sink
> + <- "csi":1 [ENABLED]
> +
> +- entity 10: csi-mux (3 pads, 2 links)
> + type V4L2 subdev subtype Unknown flags 0
> + device node name /dev/v4l-subdev1
> + pad0: Sink
> + [fmt:Y8_1X8/1x1 field:none]
> + pad1: Sink
> + [fmt:SBGGR10_1X10/800x600 field:none]
> + <- "imx7-mipi-csis.0":1 [ENABLED]
> + pad2: Source
> + [fmt:SBGGR10_1X10/800x600 field:none]
> + -> "csi":0 [ENABLED]
> +
> +- entity 14: imx7-mipi-csis.0 (2 pads, 2 links)
> + type V4L2 subdev subtype Unknown flags 0
> + device node name /dev/v4l-subdev2
> + pad0: Sink
> + [fmt:SBGGR10_1X10/800x600 field:none]
> + <- "ov2680 1-0036":0 [ENABLED]
> + pad1: Source
> + [fmt:SBGGR10_1X10/800x600 field:none]
> + -> "csi-mux":1 [ENABLED]
> +
> +- entity 17: ov2680 1-0036 (1 pad, 1 link)
> + type V4L2 subdev subtype Sensor flags 0
> + device node name /dev/v4l-subdev3
> + pad0: Source
> + [fmt:SBGGR10_1X10/800x600@1/30 field:none colorspace:srgb]
> + -> "imx7-mipi-csis.0":0 [ENABLED]
Did you check the "make htmldocs" output after this change?
This code-block is broken, as it starts from column 1.
Please add a tab (or at least 2 spaces) before each line, in order
to make Sphinx process this code block.
Thanks,
Mauro
Hi Mauro,
On Thu, Jul 25, 2019 at 7:41 AM Mauro Carvalho Chehab
<mchehab@kernel.org> wrote:
> Did you check the "make htmldocs" output after this change?
>
> This code-block is broken, as it starts from column 1.
>
> Please add a tab (or at least 2 spaces) before each line, in order
> to make Sphinx process this code block.
Sorry about this.
I will rework the patch and make sure it passes "make htmldocs".
Thanks
@@ -41,7 +41,7 @@ data from MIPI CSI-2 camera sensor. It has one source pad, corresponding to the
virtual channel 0. This module is compliant to previous version of Samsung
D-phy, and supports two D-PHY Rx Data lanes.
-csi_mux
+csi-mux
-------
This is the video multiplexer. It has two sink pads to select from either camera
@@ -56,7 +56,7 @@ can interface directly with Parallel and MIPI CSI-2 buses. It has 256 x 64 FIFO
to store received image pixel data and embedded DMA controllers to transfer data
from the FIFO through AHB bus.
-This entity has one sink pad that receives from the csi_mux entity and a single
+This entity has one sink pad that receives from the csi-mux entity and a single
source pad that routes video frames directly to memory buffers. This pad is
routed to a capture device node.
@@ -81,14 +81,14 @@ an output of 800x600, and BGGR 10 bit bayer format:
# Setup links
media-ctl -l "'ov2680 1-0036':0 -> 'imx7-mipi-csis.0':0[1]"
- media-ctl -l "'imx7-mipi-csis.0':1 -> 'csi_mux':1[1]"
- media-ctl -l "'csi_mux':2 -> 'csi':0[1]"
+ media-ctl -l "'imx7-mipi-csis.0':1 -> 'csi-mux':1[1]"
+ media-ctl -l "'csi-mux':2 -> 'csi':0[1]"
media-ctl -l "'csi':1 -> 'csi capture':0[1]"
# Configure pads for pipeline
media-ctl -V "'ov2680 1-0036':0 [fmt:SBGGR10_1X10/800x600 field:none]"
- media-ctl -V "'csi_mux':1 [fmt:SBGGR10_1X10/800x600 field:none]"
- media-ctl -V "'csi_mux':2 [fmt:SBGGR10_1X10/800x600 field:none]"
+ media-ctl -V "'csi-mux':1 [fmt:SBGGR10_1X10/800x600 field:none]"
+ media-ctl -V "'csi-mux':2 [fmt:SBGGR10_1X10/800x600 field:none]"
media-ctl -V "'imx7-mipi-csis.0':0 [fmt:SBGGR10_1X10/800x600 field:none]"
media-ctl -V "'csi':0 [fmt:SBGGR10_1X10/800x600 field:none]"
@@ -97,64 +97,63 @@ the resolutions supported by the sensor.
.. code-block:: none
- root@imx7s-warp:~# media-ctl -p
- Media controller API version 4.17.0
-
- Media device information
- ------------------------
- driver imx-media
- model imx-media
- serial
- bus info
- hw revision 0x0
- driver version 4.17.0
-
- Device topology
- - entity 1: csi (2 pads, 2 links)
- type V4L2 subdev subtype Unknown flags 0
- device node name /dev/v4l-subdev0
- pad0: Sink
- [fmt:SBGGR10_1X10/800x600 field:none]
- <- "csi_mux":2 [ENABLED]
- pad1: Source
- [fmt:SBGGR10_1X10/800x600 field:none]
- -> "csi capture":0 [ENABLED]
-
- - entity 4: csi capture (1 pad, 1 link)
- type Node subtype V4L flags 0
- device node name /dev/video0
- pad0: Sink
- <- "csi":1 [ENABLED]
-
- - entity 10: csi_mux (3 pads, 2 links)
- type V4L2 subdev subtype Unknown flags 0
- device node name /dev/v4l-subdev1
- pad0: Sink
- [fmt:unknown/0x0]
- pad1: Sink
- [fmt:unknown/800x600 field:none]
- <- "imx7-mipi-csis.0":1 [ENABLED]
- pad2: Source
- [fmt:unknown/800x600 field:none]
- -> "csi":0 [ENABLED]
-
- - entity 14: imx7-mipi-csis.0 (2 pads, 2 links)
- type V4L2 subdev subtype Unknown flags 0
- device node name /dev/v4l-subdev2
- pad0: Sink
- [fmt:SBGGR10_1X10/800x600 field:none]
- <- "ov2680 1-0036":0 [ENABLED]
- pad1: Source
- [fmt:SBGGR10_1X10/800x600 field:none]
- -> "csi_mux":1 [ENABLED]
-
- - entity 17: ov2680 1-0036 (1 pad, 1 link)
- type V4L2 subdev subtype Sensor flags 0
- device node name /dev/v4l-subdev3
- pad0: Source
- [fmt:SBGGR10_1X10/800x600 field:none]
- -> "imx7-mipi-csis.0":0 [ENABLED]
-
+# media-ctl -p
+Media controller API version 5.2.0
+
+Media device information
+------------------------
+driver imx7-csi
+model imx-media
+serial
+bus info
+hw revision 0x0
+driver version 5.2.0
+
+Device topology
+- entity 1: csi (2 pads, 2 links)
+ type V4L2 subdev subtype Unknown flags 0
+ device node name /dev/v4l-subdev0
+ pad0: Sink
+ [fmt:SBGGR10_1X10/800x600 field:none colorspace:srgb xfer:srgb ycbcr:601 quantization:full-range]
+ <- "csi-mux":2 [ENABLED]
+ pad1: Source
+ [fmt:SBGGR10_1X10/800x600 field:none colorspace:srgb xfer:srgb ycbcr:601 quantization:full-range]
+ -> "csi capture":0 [ENABLED]
+
+- entity 4: csi capture (1 pad, 1 link)
+ type Node subtype V4L flags 0
+ device node name /dev/video0
+ pad0: Sink
+ <- "csi":1 [ENABLED]
+
+- entity 10: csi-mux (3 pads, 2 links)
+ type V4L2 subdev subtype Unknown flags 0
+ device node name /dev/v4l-subdev1
+ pad0: Sink
+ [fmt:Y8_1X8/1x1 field:none]
+ pad1: Sink
+ [fmt:SBGGR10_1X10/800x600 field:none]
+ <- "imx7-mipi-csis.0":1 [ENABLED]
+ pad2: Source
+ [fmt:SBGGR10_1X10/800x600 field:none]
+ -> "csi":0 [ENABLED]
+
+- entity 14: imx7-mipi-csis.0 (2 pads, 2 links)
+ type V4L2 subdev subtype Unknown flags 0
+ device node name /dev/v4l-subdev2
+ pad0: Sink
+ [fmt:SBGGR10_1X10/800x600 field:none]
+ <- "ov2680 1-0036":0 [ENABLED]
+ pad1: Source
+ [fmt:SBGGR10_1X10/800x600 field:none]
+ -> "csi-mux":1 [ENABLED]
+
+- entity 17: ov2680 1-0036 (1 pad, 1 link)
+ type V4L2 subdev subtype Sensor flags 0
+ device node name /dev/v4l-subdev3
+ pad0: Source
+ [fmt:SBGGR10_1X10/800x600@1/30 field:none colorspace:srgb]
+ -> "imx7-mipi-csis.0":0 [ENABLED]
References
----------