[v2,2/3] media: imx-pxp: Check for pxp_soft_reset() error
Commit Message
pxp_soft_reset() may fail with a timeout, so it is better to propagate
the error in this case.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
---
Changes since v1:
- None
drivers/media/platform/imx-pxp.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
Comments
On Mon, 2018-11-05 at 18:45 -0200, Fabio Estevam wrote:
> pxp_soft_reset() may fail with a timeout, so it is better to propagate
> the error in this case.
>
> Signed-off-by: Fabio Estevam <festevam@gmail.com>
> ---
> Changes since v1:
> - None
>
> drivers/media/platform/imx-pxp.c | 12 +++++++++---
> 1 file changed, 9 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/media/platform/imx-pxp.c b/drivers/media/platform/imx-pxp.c
> index 27780f1..b3700b8 100644
> --- a/drivers/media/platform/imx-pxp.c
> +++ b/drivers/media/platform/imx-pxp.c
> @@ -1607,7 +1607,7 @@ static const struct v4l2_m2m_ops m2m_ops = {
> .job_abort = pxp_job_abort,
> };
>
> -static void pxp_soft_reset(struct pxp_dev *dev)
> +static int pxp_soft_reset(struct pxp_dev *dev)
> {
> int ret;
> u32 val;
> @@ -1619,11 +1619,15 @@ static void pxp_soft_reset(struct pxp_dev *dev)
>
> ret = readl_poll_timeout(dev->mmio + HW_PXP_CTRL, val,
> val & BM_PXP_CTRL_CLKGATE, 0, 100);
> - if (ret < 0)
> + if (ret < 0) {
> pr_err("PXP reset timeout\n");
> + return ret;
> + }
>
> writel(BM_PXP_CTRL_SFTRST, dev->mmio + HW_PXP_CTRL_CLR);
I'm not sure if we should clear SFTRST again after a timeout. It
probably doesn't matter as something went wrong anyway and the next
probe will try to clear it again.
> writel(BM_PXP_CTRL_CLKGATE, dev->mmio + HW_PXP_CTRL_CLR);
Clearing CLKGATE if it was not set by the SFTRST in time should have no
effect, so we could do this unconditionally as well.
> +
> + return 0;
So you could just "return ret;" here instead of breaking out above.
I have no preference either way.
> }
>
> static int pxp_probe(struct platform_device *pdev)
> @@ -1670,7 +1674,9 @@ static int pxp_probe(struct platform_device *pdev)
> if (ret < 0)
> return ret;
>
> - pxp_soft_reset(dev);
> + ret = pxp_soft_reset(dev);
> + if (ret < 0)
> + return ret;
This should "goto err_clk;" instead, though. With that changed,
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
regards
Philipp
@@ -1607,7 +1607,7 @@ static const struct v4l2_m2m_ops m2m_ops = {
.job_abort = pxp_job_abort,
};
-static void pxp_soft_reset(struct pxp_dev *dev)
+static int pxp_soft_reset(struct pxp_dev *dev)
{
int ret;
u32 val;
@@ -1619,11 +1619,15 @@ static void pxp_soft_reset(struct pxp_dev *dev)
ret = readl_poll_timeout(dev->mmio + HW_PXP_CTRL, val,
val & BM_PXP_CTRL_CLKGATE, 0, 100);
- if (ret < 0)
+ if (ret < 0) {
pr_err("PXP reset timeout\n");
+ return ret;
+ }
writel(BM_PXP_CTRL_SFTRST, dev->mmio + HW_PXP_CTRL_CLR);
writel(BM_PXP_CTRL_CLKGATE, dev->mmio + HW_PXP_CTRL_CLR);
+
+ return 0;
}
static int pxp_probe(struct platform_device *pdev)
@@ -1670,7 +1674,9 @@ static int pxp_probe(struct platform_device *pdev)
if (ret < 0)
return ret;
- pxp_soft_reset(dev);
+ ret = pxp_soft_reset(dev);
+ if (ret < 0)
+ return ret;
spin_lock_init(&dev->irqlock);