[v4,1/5] media: dt-bindings: media: i2c: Deprecate usage of the clock-frequency property
Commit Message
Deprecate usage of the clock-frequency property. The preferred method to
set clock rates is to use assigned-clock-rates.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
Documentation/devicetree/bindings/media/i2c/ov5645.txt | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
Comments
On Thu, Mar 19, 2020 at 12:19:19PM +0000, Lad Prabhakar wrote:
> Deprecate usage of the clock-frequency property. The preferred method to
> set clock rates is to use assigned-clock-rates.
Somewhere here and in the subject you should have 'ov5645'. Otherwise,
Acked-by: Rob Herring <robh@kernel.org>
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
> Documentation/devicetree/bindings/media/i2c/ov5645.txt | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
@@ -8,7 +8,6 @@ Required Properties:
- compatible: Value should be "ovti,ov5645".
- clocks: Reference to the xclk clock.
- clock-names: Should be "xclk".
-- clock-frequency: Frequency of the xclk clock.
- enable-gpios: Chip enable GPIO. Polarity is GPIO_ACTIVE_HIGH. This corresponds
to the hardware pin PWDNB which is physically active low.
- reset-gpios: Chip reset GPIO. Polarity is GPIO_ACTIVE_LOW. This corresponds to
@@ -37,7 +36,8 @@ Example:
clocks = <&clks 200>;
clock-names = "xclk";
- clock-frequency = <24000000>;
+ assigned-clocks = <&clks 200>;
+ assigned-clock-rates = <24000000>;
vdddo-supply = <&camera_dovdd_1v8>;
vdda-supply = <&camera_avdd_2v8>;