diff mbox

[v8,3/3] uvcvideo: handle control pipe protocol STALLs

Message ID 1525792064-30836-4-git-send-email-guennadi.liakhovetski@intel.com (mailing list archive)
State Accepted, archived
Delegated to: Laurent Pinchart
Headers

Commit Message

Guennadi Liakhovetski May 8, 2018, 3:07 p.m. UTC 
  When a command ends up in a STALL on the control pipe, use the Request
Error Code control to provide a more precise error information to the
user. For example, if a camera is still busy processing a control,
when the same or an interrelated control set request arrives, the
camera can react with a STALL and then return the "Not ready" status
in response to a UVC_VC_REQUEST_ERROR_CODE_CONTROL command. With this
patch the user would then get an EBUSY error code instead of a
generic EPIPE.

Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com>
---

v8:

* restrict UVC_VC_REQUEST_ERROR_CODE_CONTROL to the control interface
* fix the wIndex value
* improve error codes
* cosmetic changes

 drivers/media/usb/uvc/uvc_video.c | 52 ++++++++++++++++++++++++++++++++++-----
 1 file changed, 46 insertions(+), 6 deletions(-)

Comments

Laurent Pinchart July 17, 2018, 8:58 p.m. UTC | #1 
Hi Guennadi,

Thank you for the patch.

On Tuesday, 8 May 2018 18:07:44 EEST Guennadi Liakhovetski wrote:
> When a command ends up in a STALL on the control pipe, use the Request
> Error Code control to provide a more precise error information to the
> user. For example, if a camera is still busy processing a control,
> when the same or an interrelated control set request arrives, the
> camera can react with a STALL and then return the "Not ready" status
> in response to a UVC_VC_REQUEST_ERROR_CODE_CONTROL command. With this
> patch the user would then get an EBUSY error code instead of a
> generic EPIPE.
> 
> Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com>

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> ---
> 
> v8:
> 
> * restrict UVC_VC_REQUEST_ERROR_CODE_CONTROL to the control interface
> * fix the wIndex value
> * improve error codes
> * cosmetic changes
> 
>  drivers/media/usb/uvc/uvc_video.c | 52 +++++++++++++++++++++++++++++++-----
>  1 file changed, 46 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/media/usb/uvc/uvc_video.c
> b/drivers/media/usb/uvc/uvc_video.c index aa0082f..ce65cd6 100644
> --- a/drivers/media/usb/uvc/uvc_video.c
> +++ b/drivers/media/usb/uvc/uvc_video.c
> @@ -73,17 +73,57 @@ int uvc_query_ctrl(struct uvc_device *dev, u8 query, u8
> unit, u8 intfnum, u8 cs, void *data, u16 size)
>  {
>  	int ret;
> +	u8 error;
> +	u8 tmp;
> 
>  	ret = __uvc_query_ctrl(dev, query, unit, intfnum, cs, data, size,
>  				UVC_CTRL_CONTROL_TIMEOUT);
> -	if (ret != size) {
> -		uvc_printk(KERN_ERR, "Failed to query (%s) UVC control %u on "
> -			"unit %u: %d (exp. %u).\n", uvc_query_name(query), cs,
> -			unit, ret, size);
> -		return -EIO;
> +	if (likely(ret == size))
> +		return 0;
> +
> +	uvc_printk(KERN_ERR,
> +		   "Failed to query (%s) UVC control %u on unit %u: %d (exp. %u).\n",
> +		   uvc_query_name(query), cs, unit, ret, size);
> +
> +	if (ret != -EPIPE)
> +		return ret;
> +
> +	tmp = *(u8 *)data;
> +
> +	ret = __uvc_query_ctrl(dev, UVC_GET_CUR, 0, intfnum,
> +			       UVC_VC_REQUEST_ERROR_CODE_CONTROL, data, 1,
> +			       UVC_CTRL_CONTROL_TIMEOUT);
> +
> +	error = *(u8 *)data;
> +	*(u8 *)data = tmp;
> +
> +	if (ret != 1)
> +		return ret < 0 ? ret : -EPIPE;
> +
> +	uvc_trace(UVC_TRACE_CONTROL, "Control error %u\n", error);
> +
> +	switch (error) {
> +	case 0:
> +		/* Cannot happen - we received a STALL */
> +		return -EPIPE;
> +	case 1: /* Not ready */
> +		return -EBUSY;
> +	case 2: /* Wrong state */
> +		return -EILSEQ;
> +	case 3: /* Power */
> +		return -EREMOTE;
> +	case 4: /* Out of range */
> +		return -ERANGE;
> +	case 5: /* Invalid unit */
> +	case 6: /* Invalid control */
> +	case 7: /* Invalid Request */
> +	case 8: /* Invalid value within range */
> +		return -EINVAL;
> +	default: /* reserved or unknown */
> +		break;
>  	}
> 
> -	return 0;
> +	return -EPIPE;
>  }
> 
>  static void uvc_fixup_video_ctrl(struct uvc_streaming *stream,
Laurent Pinchart July 17, 2018, 11:17 p.m. UTC | #2 
Hi Guennadi,

On Tuesday, 17 July 2018 23:58:03 EEST Laurent Pinchart wrote:
> On Tuesday, 8 May 2018 18:07:44 EEST Guennadi Liakhovetski wrote:
> > When a command ends up in a STALL on the control pipe, use the Request
> > Error Code control to provide a more precise error information to the
> > user. For example, if a camera is still busy processing a control,
> > when the same or an interrelated control set request arrives, the
> > camera can react with a STALL and then return the "Not ready" status
> > in response to a UVC_VC_REQUEST_ERROR_CODE_CONTROL command. With this
> > patch the user would then get an EBUSY error code instead of a
> > generic EPIPE.
> > 
> > Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com>
> 
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

Can I push this patch already before 2/3 is ready ?

> > ---
> > 
> > v8:
> > 
> > * restrict UVC_VC_REQUEST_ERROR_CODE_CONTROL to the control interface
> > * fix the wIndex value
> > * improve error codes
> > * cosmetic changes
> > 
> >  drivers/media/usb/uvc/uvc_video.c | 52 +++++++++++++++++++++++++++++-----
> >  1 file changed, 46 insertions(+), 6 deletions(-)
> > 
> > diff --git a/drivers/media/usb/uvc/uvc_video.c
> > b/drivers/media/usb/uvc/uvc_video.c index aa0082f..ce65cd6 100644
> > --- a/drivers/media/usb/uvc/uvc_video.c
> > +++ b/drivers/media/usb/uvc/uvc_video.c
> > @@ -73,17 +73,57 @@ int uvc_query_ctrl(struct uvc_device *dev, u8 query,
> > u8
> > unit, u8 intfnum, u8 cs, void *data, u16 size)
> > 
> >  {
> >  
> >  	int ret;
> > 
> > +	u8 error;
> > +	u8 tmp;
> > 
> >  	ret = __uvc_query_ctrl(dev, query, unit, intfnum, cs, data, size,
> >  	
> >  				UVC_CTRL_CONTROL_TIMEOUT);
> > 
> > -	if (ret != size) {
> > -		uvc_printk(KERN_ERR, "Failed to query (%s) UVC control %u on "
> > -			"unit %u: %d (exp. %u).\n", uvc_query_name(query), cs,
> > -			unit, ret, size);
> > -		return -EIO;
> > +	if (likely(ret == size))
> > +		return 0;
> > +
> > +	uvc_printk(KERN_ERR,
> > +		   "Failed to query (%s) UVC control %u on unit %u: %d (exp. %u).
\n",
> > +		   uvc_query_name(query), cs, unit, ret, size);
> > +
> > +	if (ret != -EPIPE)
> > +		return ret;
> > +
> > +	tmp = *(u8 *)data;
> > +
> > +	ret = __uvc_query_ctrl(dev, UVC_GET_CUR, 0, intfnum,
> > +			       UVC_VC_REQUEST_ERROR_CODE_CONTROL, data, 1,
> > +			       UVC_CTRL_CONTROL_TIMEOUT);
> > +
> > +	error = *(u8 *)data;
> > +	*(u8 *)data = tmp;
> > +
> > +	if (ret != 1)
> > +		return ret < 0 ? ret : -EPIPE;
> > +
> > +	uvc_trace(UVC_TRACE_CONTROL, "Control error %u\n", error);
> > +
> > +	switch (error) {
> > +	case 0:
> > +		/* Cannot happen - we received a STALL */
> > +		return -EPIPE;
> > +	case 1: /* Not ready */
> > +		return -EBUSY;
> > +	case 2: /* Wrong state */
> > +		return -EILSEQ;
> > +	case 3: /* Power */
> > +		return -EREMOTE;
> > +	case 4: /* Out of range */
> > +		return -ERANGE;
> > +	case 5: /* Invalid unit */
> > +	case 6: /* Invalid control */
> > +	case 7: /* Invalid Request */
> > +	case 8: /* Invalid value within range */
> > +		return -EINVAL;
> > +	default: /* reserved or unknown */
> > +		break;
> > 
> >  	}
> > 
> > -	return 0;
> > +	return -EPIPE;
> > 
> >  }
> >  
> >  static void uvc_fixup_video_ctrl(struct uvc_streaming *stream,
diff mbox

Patch

diff --git a/drivers/media/usb/uvc/uvc_video.c b/drivers/media/usb/uvc/uvc_video.c
index aa0082f..ce65cd6 100644
--- a/drivers/media/usb/uvc/uvc_video.c
+++ b/drivers/media/usb/uvc/uvc_video.c
@@ -73,17 +73,57 @@  int uvc_query_ctrl(struct uvc_device *dev, u8 query, u8 unit,
 			u8 intfnum, u8 cs, void *data, u16 size)
 {
 	int ret;
+	u8 error;
+	u8 tmp;
 
 	ret = __uvc_query_ctrl(dev, query, unit, intfnum, cs, data, size,
 				UVC_CTRL_CONTROL_TIMEOUT);
-	if (ret != size) {
-		uvc_printk(KERN_ERR, "Failed to query (%s) UVC control %u on "
-			"unit %u: %d (exp. %u).\n", uvc_query_name(query), cs,
-			unit, ret, size);
-		return -EIO;
+	if (likely(ret == size))
+		return 0;
+
+	uvc_printk(KERN_ERR,
+		   "Failed to query (%s) UVC control %u on unit %u: %d (exp. %u).\n",
+		   uvc_query_name(query), cs, unit, ret, size);
+
+	if (ret != -EPIPE)
+		return ret;
+
+	tmp = *(u8 *)data;
+
+	ret = __uvc_query_ctrl(dev, UVC_GET_CUR, 0, intfnum,
+			       UVC_VC_REQUEST_ERROR_CODE_CONTROL, data, 1,
+			       UVC_CTRL_CONTROL_TIMEOUT);
+
+	error = *(u8 *)data;
+	*(u8 *)data = tmp;
+
+	if (ret != 1)
+		return ret < 0 ? ret : -EPIPE;
+
+	uvc_trace(UVC_TRACE_CONTROL, "Control error %u\n", error);
+
+	switch (error) {
+	case 0:
+		/* Cannot happen - we received a STALL */
+		return -EPIPE;
+	case 1: /* Not ready */
+		return -EBUSY;
+	case 2: /* Wrong state */
+		return -EILSEQ;
+	case 3: /* Power */
+		return -EREMOTE;
+	case 4: /* Out of range */
+		return -ERANGE;
+	case 5: /* Invalid unit */
+	case 6: /* Invalid control */
+	case 7: /* Invalid Request */
+	case 8: /* Invalid value within range */
+		return -EINVAL;
+	default: /* reserved or unknown */
+		break;
 	}
 
-	return 0;
+	return -EPIPE;
 }
 
 static void uvc_fixup_video_ctrl(struct uvc_streaming *stream,