diff mbox

[v4,13/14] v4l: ti-vpe: Set correct field parameter for output and capture buffers

Message ID 1394711056-10878-14-git-send-email-archit@ti.com (mailing list archive)
State Awaiting Upstream, archived
Delegated to: Kamil Debski
Headers

Commit Message

Archit Taneja March 13, 2014, 11:44 a.m. UTC 
  The vpe driver wasn't setting the correct field parameter for dequed CAPTURE
type buffers for the case where the captured output is progressive.

Set the field to V4L2_FIELD_NONE for the completed destination buffers when
the captured output is progressive.

For OUTPUT type buffers, a queued buffer's field is forced to V4L2_FIELD_NONE
if the pixel format(configured through s_fmt for the buffer type
V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE specifies) the field type isn't interlaced.
If the pixel format specified was V4L2_FIELD_ALTERNATE, and the queued buffer's
field isn't V4L2_FIELD_TOP or V4L2_FIELD_BOTTOM, the vb2 buf_prepare op returns
an error.

This ensures compliance, and that the dequeued output and captured buffers
contain the field type that the driver used internally.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/media/platform/ti-vpe/vpe.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)
diff mbox

Patch

diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c
index c0ae847..362d5be 100644
--- a/drivers/media/platform/ti-vpe/vpe.c
+++ b/drivers/media/platform/ti-vpe/vpe.c
@@ -1296,10 +1296,10 @@  static irqreturn_t vpe_irq(int irq_vpe, void *data)
 		d_buf->timecode = s_buf->timecode;
 	}
 	d_buf->sequence = ctx->sequence;
-	d_buf->field = ctx->field;
 
 	d_q_data = &ctx->q_data[Q_DATA_DST];
 	if (d_q_data->flags & Q_DATA_INTERLACED) {
+		d_buf->field = ctx->field;
 		if (ctx->field == V4L2_FIELD_BOTTOM) {
 			ctx->sequence++;
 			ctx->field = V4L2_FIELD_TOP;
@@ -1308,6 +1308,7 @@  static irqreturn_t vpe_irq(int irq_vpe, void *data)
 			ctx->field = V4L2_FIELD_BOTTOM;
 		}
 	} else {
+		d_buf->field = V4L2_FIELD_NONE;
 		ctx->sequence++;
 	}
 
@@ -1880,6 +1881,16 @@  static int vpe_buf_prepare(struct vb2_buffer *vb)
 	q_data = get_q_data(ctx, vb->vb2_queue->type);
 	num_planes = q_data->fmt->coplanar ? 2 : 1;
 
+	if (vb->vb2_queue->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
+		if (!(q_data->flags & Q_DATA_INTERLACED)) {
+			vb->v4l2_buf.field = V4L2_FIELD_NONE;
+		} else {
+			if (vb->v4l2_buf.field != V4L2_FIELD_TOP &&
+					vb->v4l2_buf.field != V4L2_FIELD_BOTTOM)
+				return -EINVAL;
+		}
+	}
+
 	for (i = 0; i < num_planes; i++) {
 		if (vb2_plane_size(vb, i) < q_data->sizeimage[i]) {
 			vpe_err(ctx->dev,