From patchwork Tue Jul 2 03:31:02 2013 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Libin Yang X-Patchwork-Id: 19130 Received: from mail.tu-berlin.de ([130.149.7.33]) by www.linuxtv.org with esmtp (Exim 4.72) (envelope-from ) id 1UtrJL-0007QI-Dr; Tue, 02 Jul 2013 05:31:23 +0200 X-tubIT-Incoming-IP: 209.132.180.67 Received: from vger.kernel.org ([209.132.180.67]) by mail.tu-berlin.de (exim-4.72/mailfrontend-8) with esmtp id 1UtrJI-0002z3-l9; Tue, 02 Jul 2013 05:31:22 +0200 Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755046Ab3GBDbS (ORCPT + 1 other); Mon, 1 Jul 2013 23:31:18 -0400 Received: from na3sys009aog128.obsmtp.com ([74.125.149.141]:60214 "EHLO na3sys009aog128.obsmtp.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752701Ab3GBDbR (ORCPT ); Mon, 1 Jul 2013 23:31:17 -0400 Received: from SC-OWA01.marvell.com ([199.233.58.136]) (using TLSv1) by na3sys009aob128.postini.com ([74.125.148.12]) with SMTP ID DSNKUdJJgWV2EldVfKThwxi0dxBx9HbhcA3/@postini.com; Mon, 01 Jul 2013 20:31:17 PDT Received: from maili.marvell.com (10.93.76.43) by sc-owa01.marvell.com (10.93.76.21) with Microsoft SMTP Server id 8.3.213.0; Mon, 1 Jul 2013 20:31:12 -0700 Received: from localhost (unknown [10.38.36.205]) by maili.marvell.com (Postfix) with ESMTP id E86421CCD9C; Mon, 1 Jul 2013 20:31:11 -0700 (PDT) From: Libin Yang To: , CC: , , Libin Yang , Albert Wang Subject: [PATCH v2 1/7] marvell-ccic: add MIPI support for marvell-ccic driver Date: Tue, 2 Jul 2013 11:31:02 +0800 Message-ID: <1372735868-15880-2-git-send-email-lbyang@marvell.com> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: <1372735868-15880-1-git-send-email-lbyang@marvell.com> References: <1372735868-15880-1-git-send-email-lbyang@marvell.com> MIME-Version: 1.0 Sender: linux-media-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org X-PMX-Version: 6.0.0.2142326, Antispam-Engine: 2.7.2.2107409, Antispam-Data: 2013.7.2.32117 X-PMX-Spam: Gauge=IIIIIIIII, Probability=9%, Report=' MULTIPLE_RCPTS 0.1, HTML_00_01 0.05, HTML_00_10 0.05, MSGID_ADDED_BY_MTA 0.05, BODY_SIZE_10000_PLUS 0, __ANY_URI 0, __CP_MEDIA_BODY 0, __CT 0, __CT_TEXT_PLAIN 0, __DATE_TZ_HK 0, __HAS_FROM 0, __HAS_MSGID 0, __HAS_X_MAILER 0, __HAS_X_MAILING_LIST 0, __IN_REP_TO 0, __LINES_OF_YELLING 0, __MIME_TEXT_ONLY 0, __MIME_VERSION 0, __MULTIPLE_RCPTS_CC_X2 0, __SANE_MSGID 0, __SUBJ_ALPHA_END 0, __TO_MALFORMED_2 0, __TO_NO_NAME 0, __URI_NO_PATH 0, __URI_NO_WWW 0, __URI_NS ' This patch adds the MIPI support for marvell-ccic. Board driver should determine whether using MIPI or not. Signed-off-by: Albert Wang Signed-off-by: Libin Yang --- drivers/media/platform/marvell-ccic/cafe-driver.c | 4 +- drivers/media/platform/marvell-ccic/mcam-core.c | 78 ++++++++++++- drivers/media/platform/marvell-ccic/mcam-core.h | 37 +++++- drivers/media/platform/marvell-ccic/mmp-driver.c | 129 ++++++++++++++++++++- include/media/mmp-camera.h | 19 +++ 5 files changed, 256 insertions(+), 11 deletions(-) diff --git a/drivers/media/platform/marvell-ccic/cafe-driver.c b/drivers/media/platform/marvell-ccic/cafe-driver.c index d030f9b..68e82fb 100644 --- a/drivers/media/platform/marvell-ccic/cafe-driver.c +++ b/drivers/media/platform/marvell-ccic/cafe-driver.c @@ -400,7 +400,7 @@ static void cafe_ctlr_init(struct mcam_camera *mcam) } -static void cafe_ctlr_power_up(struct mcam_camera *mcam) +static int cafe_ctlr_power_up(struct mcam_camera *mcam) { /* * Part one of the sensor dance: turn the global @@ -415,6 +415,8 @@ static void cafe_ctlr_power_up(struct mcam_camera *mcam) */ mcam_reg_write(mcam, REG_GPR, GPR_C1EN|GPR_C0EN); /* pwr up, reset */ mcam_reg_write(mcam, REG_GPR, GPR_C1EN|GPR_C0EN|GPR_C0); + + return 0; } static void cafe_ctlr_power_down(struct mcam_camera *mcam) diff --git a/drivers/media/platform/marvell-ccic/mcam-core.c b/drivers/media/platform/marvell-ccic/mcam-core.c index 64ab91e..1e8b3d3 100644 --- a/drivers/media/platform/marvell-ccic/mcam-core.c +++ b/drivers/media/platform/marvell-ccic/mcam-core.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include #include @@ -254,6 +255,45 @@ static void mcam_ctlr_stop(struct mcam_camera *cam) mcam_reg_clear_bit(cam, REG_CTRL0, C0_ENABLE); } +static void mcam_enable_mipi(struct mcam_camera *mcam) +{ + /* Using MIPI mode and enable MIPI */ + cam_dbg(mcam, "camera: DPHY3=0x%x, DPHY5=0x%x, DPHY6=0x%x\n", + mcam->dphy[0], mcam->dphy[1], mcam->dphy[2]); + mcam_reg_write(mcam, REG_CSI2_DPHY3, mcam->dphy[0]); + mcam_reg_write(mcam, REG_CSI2_DPHY5, mcam->dphy[1]); + mcam_reg_write(mcam, REG_CSI2_DPHY6, mcam->dphy[2]); + + if (!mcam->mipi_enabled) { + if (mcam->lane > 4 || mcam->lane <= 0) { + cam_warn(mcam, "lane number error\n"); + mcam->lane = 1; /* set the default value */ + } + /* + * 0x41 actives 1 lane + * 0x43 actives 2 lanes + * 0x45 actives 3 lanes (never happen) + * 0x47 actives 4 lanes + */ + mcam_reg_write(mcam, REG_CSI2_CTRL0, + CSI2_C0_MIPI_EN | CSI2_C0_ACT_LANE(mcam->lane)); + mcam_reg_write(mcam, REG_CLKCTRL, + (mcam->mclk_src << 29) | mcam->mclk_div); + + mcam->mipi_enabled = true; + } +} + +static void mcam_disable_mipi(struct mcam_camera *mcam) +{ + /* Using Parallel mode or disable MIPI */ + mcam_reg_write(mcam, REG_CSI2_CTRL0, 0x0); + mcam_reg_write(mcam, REG_CSI2_DPHY3, 0x0); + mcam_reg_write(mcam, REG_CSI2_DPHY5, 0x0); + mcam_reg_write(mcam, REG_CSI2_DPHY6, 0x0); + mcam->mipi_enabled = false; +} + /* ------------------------------------------------------------------- */ #ifdef MCAM_MODE_VMALLOC @@ -657,6 +697,13 @@ static void mcam_ctlr_image(struct mcam_camera *cam) */ mcam_reg_write_mask(cam, REG_CTRL0, C0_SIF_HVSYNC, C0_SIFM_MASK); + + /* + * This field controls the generation of EOF(DVP only) + */ + if (cam->bus_type != V4L2_MBUS_CSI2) + mcam_reg_set_bit(cam, REG_CTRL0, + C0_EOF_VSYNC | C0_VEDGE_CTRL); } @@ -754,15 +801,21 @@ static void mcam_ctlr_stop_dma(struct mcam_camera *cam) /* * Power up and down. */ -static void mcam_ctlr_power_up(struct mcam_camera *cam) +static int mcam_ctlr_power_up(struct mcam_camera *cam) { unsigned long flags; + int ret; spin_lock_irqsave(&cam->dev_lock, flags); - cam->plat_power_up(cam); + ret = cam->plat_power_up(cam); + if (ret) { + spin_unlock_irqrestore(&cam->dev_lock, flags); + return ret; + } mcam_reg_clear_bit(cam, REG_CTRL1, C1_PWRDWN); spin_unlock_irqrestore(&cam->dev_lock, flags); msleep(5); /* Just to be sure */ + return 0; } static void mcam_ctlr_power_down(struct mcam_camera *cam) @@ -887,6 +940,17 @@ static int mcam_read_setup(struct mcam_camera *cam) spin_lock_irqsave(&cam->dev_lock, flags); clear_bit(CF_DMA_ACTIVE, &cam->flags); mcam_reset_buffers(cam); + /* + * Update CSI2_DPHY value + */ + if (cam->calc_dphy) + cam->calc_dphy(cam); + cam_dbg(cam, "camera: DPHY sets: dphy3=0x%x, dphy5=0x%x, dphy6=0x%x\n", + cam->dphy[0], cam->dphy[1], cam->dphy[2]); + if (cam->bus_type == V4L2_MBUS_CSI2) + mcam_enable_mipi(cam); + else + mcam_disable_mipi(cam); mcam_ctlr_irq_enable(cam); cam->state = S_STREAMING; if (!test_bit(CF_SG_RESTART, &cam->flags)) @@ -1503,7 +1567,9 @@ static int mcam_v4l_open(struct file *filp) ret = mcam_setup_vb2(cam); if (ret) goto out; - mcam_ctlr_power_up(cam); + ret = mcam_ctlr_power_up(cam); + if (ret) + goto out; __mcam_cam_reset(cam); mcam_set_config_needed(cam, 1); } @@ -1526,10 +1592,12 @@ static int mcam_v4l_release(struct file *filp) if (cam->users == 0) { mcam_ctlr_stop_dma(cam); mcam_cleanup_vb2(cam); + mcam_disable_mipi(cam); mcam_ctlr_power_down(cam); if (cam->buffer_mode == B_vmalloc && alloc_bufs_at_read) mcam_free_dma_bufs(cam); } + mutex_unlock(&cam->s_mutex); return 0; } @@ -1816,7 +1884,9 @@ int mccic_resume(struct mcam_camera *cam) mutex_lock(&cam->s_mutex); if (cam->users > 0) { - mcam_ctlr_power_up(cam); + ret = mcam_ctlr_power_up(cam); + if (ret) + return ret; __mcam_cam_reset(cam); } else { mcam_ctlr_power_down(cam); diff --git a/drivers/media/platform/marvell-ccic/mcam-core.h b/drivers/media/platform/marvell-ccic/mcam-core.h index 01dec9e..90162ef 100644 --- a/drivers/media/platform/marvell-ccic/mcam-core.h +++ b/drivers/media/platform/marvell-ccic/mcam-core.h @@ -102,11 +102,28 @@ struct mcam_camera { short int clock_speed; /* Sensor clock speed, default 30 */ short int use_smbus; /* SMBUS or straight I2c? */ enum mcam_buffer_mode buffer_mode; + + int mclk_min; /* The minimal value of mclk */ + int mclk_src; /* which clock source the mclk derives from */ + int mclk_div; /* Clock Divider Value for MCLK */ + + enum v4l2_mbus_type bus_type; + /* MIPI support */ + /* The dphy config value, allocated in board file + * dphy[0]: DPHY3 + * dphy[1]: DPHY5 + * dphy[2]: DPHY6 + */ + int *dphy; + bool mipi_enabled; /* flag whether mipi is enable already */ + int lane; /* lane number */ + /* * Callbacks from the core to the platform code. */ - void (*plat_power_up) (struct mcam_camera *cam); + int (*plat_power_up) (struct mcam_camera *cam); void (*plat_power_down) (struct mcam_camera *cam); + void (*calc_dphy) (struct mcam_camera *cam); /* * Everything below here is private to the mcam core and @@ -220,6 +237,17 @@ int mccic_resume(struct mcam_camera *cam); #define REG_Y0BAR 0x00 #define REG_Y1BAR 0x04 #define REG_Y2BAR 0x08 + +/* + * register definitions for MIPI support + */ +#define REG_CSI2_CTRL0 0x100 +#define CSI2_C0_MIPI_EN (0x1 << 0) +#define CSI2_C0_ACT_LANE(n) ((n-1) << 1) +#define REG_CSI2_DPHY3 0x12c +#define REG_CSI2_DPHY5 0x134 +#define REG_CSI2_DPHY6 0x138 + /* ... */ #define REG_IMGPITCH 0x24 /* Image pitch register */ @@ -288,13 +316,16 @@ int mccic_resume(struct mcam_camera *cam); #define C0_YUVE_XUVY 0x00020000 /* 420: .UVY */ #define C0_YUVE_XVUY 0x00030000 /* 420: .VUY */ /* Bayer bits 18,19 if needed */ +#define C0_EOF_VSYNC 0x00400000 /* Generate EOF by VSYNC */ +#define C0_VEDGE_CTRL 0x00800000 /* Detect falling edge of VSYNC */ #define C0_HPOL_LOW 0x01000000 /* HSYNC polarity active low */ #define C0_VPOL_LOW 0x02000000 /* VSYNC polarity active low */ #define C0_VCLK_LOW 0x04000000 /* VCLK on falling edge */ #define C0_DOWNSCALE 0x08000000 /* Enable downscaler */ -#define C0_SIFM_MASK 0xc0000000 /* SIF mode bits */ +/* SIFMODE */ #define C0_SIF_HVSYNC 0x00000000 /* Use H/VSYNC */ -#define CO_SOF_NOSYNC 0x40000000 /* Use inband active signaling */ +#define C0_SOF_NOSYNC 0x40000000 /* Use inband active signaling */ +#define C0_SIFM_MASK 0xc0000000 /* SIF mode bits */ /* Bits below C1_444ALPHA are not present in Cafe */ #define REG_CTRL1 0x40 /* Control 1 */ diff --git a/drivers/media/platform/marvell-ccic/mmp-driver.c b/drivers/media/platform/marvell-ccic/mmp-driver.c index c4c17fe..3b343ce 100644 --- a/drivers/media/platform/marvell-ccic/mmp-driver.c +++ b/drivers/media/platform/marvell-ccic/mmp-driver.c @@ -27,6 +27,7 @@ #include #include #include +#include #include "mcam-core.h" @@ -39,6 +40,7 @@ struct mmp_camera { struct platform_device *pdev; struct mcam_camera mcam; struct list_head devlist; + struct clk *mipi_clk; int irq; }; @@ -113,7 +115,7 @@ static void mmpcam_power_up_ctlr(struct mmp_camera *cam) mdelay(1); } -static void mmpcam_power_up(struct mcam_camera *mcam) +static int mmpcam_power_up(struct mcam_camera *mcam) { struct mmp_camera *cam = mcam_to_cam(mcam); struct mmp_camera_platform_data *pdata; @@ -133,6 +135,12 @@ static void mmpcam_power_up(struct mcam_camera *mcam) mdelay(5); gpio_set_value(pdata->sensor_reset_gpio, 1); /* reset is active low */ mdelay(5); + if (mcam->bus_type == V4L2_MBUS_CSI2) { + cam->mipi_clk = devm_clk_get(mcam->dev, "mipi"); + if ((IS_ERR(cam->mipi_clk) && mcam->dphy[2] == 0)) + return PTR_ERR(cam->mipi_clk); + } + return 0; } static void mmpcam_power_down(struct mcam_camera *mcam) @@ -150,8 +158,109 @@ static void mmpcam_power_down(struct mcam_camera *mcam) pdata = cam->pdev->dev.platform_data; gpio_set_value(pdata->sensor_power_gpio, 0); gpio_set_value(pdata->sensor_reset_gpio, 0); + + if (mcam->bus_type == V4L2_MBUS_CSI2 && !IS_ERR(cam->mipi_clk)) { + if (cam->mipi_clk) + devm_clk_put(mcam->dev, cam->mipi_clk); + cam->mipi_clk = NULL; + } } +/* + * calc the dphy register values + * There are three dphy registers being used. + * dphy[0] - CSI2_DPHY3 + * dphy[1] - CSI2_DPHY5 + * dphy[2] - CSI2_DPHY6 + * CSI2_DPHY3 and CSI2_DPHY6 can be set with a default value + * or be calculated dynamically + */ +void mmpcam_calc_dphy(struct mcam_camera *mcam) +{ + struct mmp_camera *cam = mcam_to_cam(mcam); + struct mmp_camera_platform_data *pdata = cam->pdev->dev.platform_data; + struct device *dev = &cam->pdev->dev; + unsigned long tx_clk_esc; + + /* + * If CSI2_DPHY3 is calculated dynamically, + * pdata->lane_clk should be already set + * either in the board driver statically + * or in the sensor driver dynamically. + */ + /* + * dphy[0] - CSI2_DPHY3: + * bit 0 ~ bit 7: HS Term Enable. + * defines the time that the DPHY + * wait before enabling the data + * lane termination after detecting + * that the sensor has driven the data + * lanes to the LP00 bridge state. + * The value is calculated by: + * (Max T(D_TERM_EN)/Period(DDR)) - 1 + * bit 8 ~ bit 15: HS_SETTLE + * Time interval during which the HS + * receiver shall ignore any Data Lane + * HS transistions. + * The vaule has been calibrated on + * different boards. It seems to work well. + * + * More detail please refer + * MIPI Alliance Spectification for D-PHY + * document for explanation of HS-SETTLE + * and D-TERM-EN. + */ + switch (pdata->dphy3_algo) { + case DPHY3_ALGO_PXA910: + /* + * Calculate CSI2_DPHY3 algo for PXA910 + */ + pdata->dphy[0] = + (((1 + (pdata->lane_clk * 80) / 1000) & 0xff) << 8) + | (1 + pdata->lane_clk * 35 / 1000); + break; + case DPHY3_ALGO_PXA2128: + /* + * Calculate CSI2_DPHY3 algo for PXA2128 + */ + pdata->dphy[0] = + (((2 + (pdata->lane_clk * 110) / 1000) & 0xff) << 8) + | (1 + pdata->lane_clk * 35 / 1000); + break; + default: + /* + * Use default CSI2_DPHY3 value for PXA688/PXA988 + */ + dev_dbg(dev, "camera: use the default CSI2_DPHY3 value\n"); + } + + /* + * mipi_clk will never be changed, it is a fixed value on MMP + */ + if (IS_ERR(cam->mipi_clk)) + return; + + /* get the escape clk, this is hard coded */ + tx_clk_esc = (clk_get_rate(cam->mipi_clk) / 1000000) / 12; + + /* + * dphy[2] - CSI2_DPHY6: + * bit 0 ~ bit 7: CK Term Enable + * Time for the Clock Lane receiver to enable the HS line + * termination. The value is calculated similarly with + * HS Term Enable + * bit 8 ~ bit 15: CK Settle + * Time interval during which the HS receiver shall ignore + * any Clock Lane HS transitions. + * The value is calibrated on the boards. + */ + pdata->dphy[2] = + ((((534 * tx_clk_esc) / 2000 - 1) & 0xff) << 8) + | (((38 * tx_clk_esc) / 1000 - 1) & 0xff); + + dev_dbg(dev, "camera: DPHY sets: dphy3=0x%x, dphy5=0x%x, dphy6=0x%x\n", + pdata->dphy[0], pdata->dphy[1], pdata->dphy[2]); +} static irqreturn_t mmpcam_irq(int irq, void *data) { @@ -174,17 +283,30 @@ static int mmpcam_probe(struct platform_device *pdev) struct mmp_camera_platform_data *pdata; int ret; + pdata = pdev->dev.platform_data; + if (!pdata) + return -ENODEV; + cam = kzalloc(sizeof(*cam), GFP_KERNEL); if (cam == NULL) return -ENOMEM; cam->pdev = pdev; + cam->mipi_clk = NULL; INIT_LIST_HEAD(&cam->devlist); mcam = &cam->mcam; mcam->plat_power_up = mmpcam_power_up; mcam->plat_power_down = mmpcam_power_down; + mcam->calc_dphy = mmpcam_calc_dphy; mcam->dev = &pdev->dev; mcam->use_smbus = 0; + mcam->mclk_min = pdata->mclk_min; + mcam->mclk_src = pdata->mclk_src; + mcam->mclk_div = pdata->mclk_div; + mcam->bus_type = pdata->bus_type; + mcam->dphy = pdata->dphy; + mcam->mipi_enabled = false; + mcam->lane = pdata->lane; mcam->chip_id = V4L2_IDENT_ARMADA610; mcam->buffer_mode = B_DMA_sg; spin_lock_init(&mcam->dev_lock); @@ -223,7 +345,6 @@ static int mmpcam_probe(struct platform_device *pdev) * Find the i2c adapter. This assumes, of course, that the * i2c bus is already up and functioning. */ - pdata = pdev->dev.platform_data; mcam->i2c_adapter = platform_get_drvdata(pdata->i2c_device); if (mcam->i2c_adapter == NULL) { ret = -ENODEV; @@ -250,7 +371,9 @@ static int mmpcam_probe(struct platform_device *pdev) /* * Power the device up and hand it off to the core. */ - mmpcam_power_up(mcam); + ret = mmpcam_power_up(mcam); + if (ret) + goto out_gpio2; ret = mccic_register(mcam); if (ret) goto out_gpio2; diff --git a/include/media/mmp-camera.h b/include/media/mmp-camera.h index 7611963..b099d4b 100644 --- a/include/media/mmp-camera.h +++ b/include/media/mmp-camera.h @@ -1,9 +1,28 @@ +#include /* * Information for the Marvell Armada MMP camera */ +enum dphy3_algo { + DPHY3_ALGO_DEFAULT = 0, + DPHY3_ALGO_PXA910, + DPHY3_ALGO_PXA2128 +}; + struct mmp_camera_platform_data { struct platform_device *i2c_device; int sensor_power_gpio; int sensor_reset_gpio; + enum v4l2_mbus_type bus_type; + int mclk_min; + int mclk_src; + int mclk_div; + /* + * MIPI support + */ + int dphy[3]; /* DPHY: CSI2_DPHY3, CSI2_DPHY5, CSI2_DPHY6 */ + enum dphy3_algo dphy3_algo; /* algos for calculate CSI2_DPHY3 */ + int mipi_enabled; /* MIPI enabled flag */ + int lane; /* ccic used lane number; 0 means DVP mode */ + int lane_clk; };