diff --git a/drivers/media/pci/sta2x11/Kconfig b/drivers/media/pci/sta2x11/Kconfig
index 6749f67..a94ccad 100644
--- a/drivers/media/pci/sta2x11/Kconfig
+++ b/drivers/media/pci/sta2x11/Kconfig
@@ -2,7 +2,7 @@ config STA2X11_VIP
 	tristate "STA2X11 VIP Video For Linux"
 	depends on STA2X11
 	select VIDEO_ADV7180 if MEDIA_SUBDRV_AUTOSELECT
-	select VIDEOBUF_DMA_CONTIG
+	select VIDEOBUF2_DMA_CONTIG
 	depends on PCI && VIDEO_V4L2 && VIRT_TO_BUS
 	help
 	  Say Y for support for STA2X11 VIP (Video Input Port) capture
diff --git a/drivers/media/pci/sta2x11/sta2x11_vip.c b/drivers/media/pci/sta2x11/sta2x11_vip.c
index ed1337a..834ac55 100644
--- a/drivers/media/pci/sta2x11/sta2x11_vip.c
+++ b/drivers/media/pci/sta2x11/sta2x11_vip.c
@@ -1,7 +1,11 @@
 /*
  * This is the driver for the STA2x11 Video Input Port.
  *
+ * Copyright (C) 2012       ST Microelectronics
+ *     author: Federico Vaga <federico.vaga@gmail.com>
  * Copyright (C) 2010       WindRiver Systems, Inc.
+ *     authors: Andreas Kies <andreas.kies@windriver.com>
+ *              Vlad Lungu   <vlad.lungu@windriver.com>
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -19,36 +23,30 @@
  * The full GNU General Public License is included in this distribution in
  * the file called "COPYING".
  *
- * Author: Andreas Kies <andreas.kies@windriver.com>
- *		Vlad Lungu <vlad.lungu@windriver.com>
- *
  */
 
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
-#include <linux/vmalloc.h>
-
 #include <linux/videodev2.h>
-
 #include <linux/kmod.h>
-
 #include <linux/pci.h>
 #include <linux/interrupt.h>
-#include <linux/mutex.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
 #include <linux/i2c.h>
 #include <linux/delay.h>
 #include <media/v4l2-common.h>
 #include <media/v4l2-device.h>
+#include <media/v4l2-ctrls.h>
 #include <media/v4l2-ioctl.h>
-#include <media/videobuf-dma-contig.h>
+#include <media/v4l2-fh.h>
+#include <media/v4l2-event.h>
+#include <media/videobuf2-dma-contig.h>
 
 #include "sta2x11_vip.h"
 
-#define DRV_NAME "sta2x11_vip"
 #define DRV_VERSION "1.3"
 
 #ifndef PCI_DEVICE_ID_STMICRO_VIP
@@ -63,8 +61,8 @@
 #define DVP_TFS		0x08
 #define DVP_BFO		0x0C
 #define DVP_BFS		0x10
-#define DVP_VTP         0x14
-#define DVP_VBP         0x18
+#define DVP_VTP		0x14
+#define DVP_VBP		0x18
 #define DVP_VMP		0x1C
 #define DVP_ITM		0x98
 #define DVP_ITS		0x9C
@@ -84,13 +82,21 @@
 
 #define DVP_HLFLN_SD	0x00000001
 
-#define REG_WRITE(vip, reg, value) iowrite32((value), (vip->iomem)+(reg))
-#define REG_READ(vip, reg) ioread32((vip->iomem)+(reg))
-
 #define SAVE_COUNT 8
 #define AUX_COUNT 3
 #define IRQ_COUNT 1
 
+
+struct vip_buffer {
+	struct vb2_buffer	vb;
+	struct list_head	list;
+	dma_addr_t		dma;
+};
+static inline struct vip_buffer *to_vip_buffer(struct vb2_buffer *vb2)
+{
+	return container_of(vb2, struct vip_buffer, vb);
+}
+
 /**
  * struct sta2x11_vip - All internal data for one instance of device
  * @v4l2_dev: device registered in v4l layer
@@ -99,29 +105,26 @@
  * @adapter: contains I2C adapter information
  * @register_save_area: All relevant register are saved here during suspend
  * @decoder: contains information about video DAC
+ * @ctrl_hdl: handler for control framework
  * @format: pixel format, fixed UYVY
  * @std: video standard (e.g. PAL/NTSC)
  * @input: input line for video signal ( 0 or 1 )
- * @users: Number of open of device ( max. 1 )
  * @disabled: Device is in power down state
- * @mutex: ensures exclusive opening of device
  * @slock: for excluse acces of registers
- * @vb_vidq: queue maintained by videobuf layer
- * @capture: linked list of capture buffer
- * @active: struct videobuf_buffer currently beingg filled
- * @started: device is ready to capture frame
- * @closing: device will be shut down
+ * @alloc_ctx: context for videobuf2
+ * @vb_vidq: queue maintained by videobuf2 layer
+ * @buffer_list: list of buffer in use
+ * @sequence: sequence number of acquired buffer
+ * @active: current active buffer
+ * @lock: used in videobuf2 callback
  * @tcount: Number of top frames
  * @bcount: Number of bottom frames
  * @overflow: Number of FIFO overflows
- * @mem_spare: small buffer of unused frame
- * @dma_spare: dma addres of mem_spare
  * @iomem: hardware base address
  * @config: I2C and gpio config from platform
  *
  * All non-local data is accessed via this structure.
  */
-
 struct sta2x11_vip {
 	struct v4l2_device v4l2_dev;
 	struct video_device *video_dev;
@@ -129,21 +132,27 @@ struct sta2x11_vip {
 	struct i2c_adapter *adapter;
 	unsigned int register_save_area[IRQ_COUNT + SAVE_COUNT + AUX_COUNT];
 	struct v4l2_subdev *decoder;
+	struct v4l2_ctrl_handler ctrl_hdl;
+
+
 	struct v4l2_pix_format format;
 	v4l2_std_id std;
 	unsigned int input;
-	int users;
 	int disabled;
-	struct mutex mutex;	/* exclusive access during open */
-	spinlock_t slock;	/* spin lock for hardware and queue access */
-	struct videobuf_queue vb_vidq;
-	struct list_head capture;
-	struct videobuf_buffer *active;
-	int started, closing, tcount, bcount;
+	spinlock_t slock;
+
+	struct vb2_alloc_ctx *alloc_ctx;
+	struct vb2_queue vb_vidq;
+	struct list_head buffer_list;
+	unsigned int sequence;
+	struct vip_buffer *active; /* current active buffer */
+	spinlock_t lock; /* Used in videobuf2 callback */
+
+	/* Interrupt counters */
+	int tcount, bcount;
 	int overflow;
-	void *mem_spare;
-	dma_addr_t dma_spare;
-	void *iomem;
+
+	void *iomem;	/* I/O Memory */
 	struct vip_config *config;
 };
 
@@ -206,318 +215,195 @@ static struct v4l2_pix_format formats_60[] = {
 	 .colorspace = V4L2_COLORSPACE_SMPTE170M},
 };
 
-/**
- * buf_setup - Get size and number of video buffer
- * @vq: queue in videobuf
- * @count: Number of buffers (1..MAX_FRAMES).
- *		0 use default value.
- * @size:  size of buffer in bytes
- *
- * returns size and number of buffers
- * a preset value of 0 returns the default number.
- * return value: 0, always succesfull.
- */
-static int buf_setup(struct videobuf_queue *vq, unsigned int *count,
-		     unsigned int *size)
+/* Write VIP register */
+static inline void reg_write(struct sta2x11_vip *vip, unsigned int reg, u32 val)
 {
-	struct sta2x11_vip *vip = vq->priv_data;
-
-	*size = vip->format.width * vip->format.height * 2;
-	if (0 == *count || MAX_FRAMES < *count)
-		*count = MAX_FRAMES;
-	return 0;
-};
-
-/**
- * buf_prepare - prepare buffer for usage
- * @vq: queue in videobuf layer
- * @vb: buffer to be prepared
- * @field: type of video data (interlaced/non-interlaced)
- *
- * Allocate or realloc buffer
- * return value: 0, successful.
- *
- * -EINVAL, supplied buffer is too small.
- *
- *  other, buffer could not be locked.
- */
-static int buf_prepare(struct videobuf_queue *vq, struct videobuf_buffer *vb,
-		       enum v4l2_field field)
+	iowrite32((val), (vip->iomem)+(reg));
+}
+/* Read VIP register */
+static inline u32 reg_read(struct sta2x11_vip *vip, unsigned int reg)
 {
-	struct sta2x11_vip *vip = vq->priv_data;
-	int ret;
-
-	vb->size = vip->format.width * vip->format.height * 2;
-	if ((0 != vb->baddr) && (vb->bsize < vb->size))
-		return -EINVAL;
-	vb->width = vip->format.width;
-	vb->height = vip->format.height;
-	vb->field = field;
-
-	if (VIDEOBUF_NEEDS_INIT == vb->state) {
-		ret = videobuf_iolock(vq, vb, NULL);
-		if (ret)
-			goto fail;
-	}
-	vb->state = VIDEOBUF_PREPARED;
-	return 0;
-fail:
-	videobuf_dma_contig_free(vq, vb);
-	vb->state = VIDEOBUF_NEEDS_INIT;
-	return ret;
+	return  ioread32((vip->iomem)+(reg));
 }
-
-/**
- * buf_queu - queue buffer for filling
- * @vq: queue in videobuf layer
- * @vb: buffer to be queued
- *
- * if capturing is already running, the buffer will be queued. Otherwise
- * capture is started and the buffer is used directly.
- */
-static void buf_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb)
+/* Start DMA acquisition */
+static void start_dma(struct sta2x11_vip *vip, struct vip_buffer *vip_buf)
 {
-	struct sta2x11_vip *vip = vq->priv_data;
-	u32 dma;
+	unsigned long offset = 0;
+
+	if (vip->format.field == V4L2_FIELD_INTERLACED)
+		offset = vip->format.width * 2;
 
-	vb->state = VIDEOBUF_QUEUED;
+	spin_lock_irq(&vip->slock);
+	/* Enable acquisition */
+	reg_write(vip, DVP_CTL, reg_read(vip, DVP_CTL) | DVP_CTL_ENA);
+	/* Set Top and Bottom Field memory address */
+	reg_write(vip, DVP_VTP, (u32)vip_buf->dma);
+	reg_write(vip, DVP_VBP, (u32)vip_buf->dma + offset);
+	spin_unlock_irq(&vip->slock);
+}
 
-	if (vip->active) {
-		list_add_tail(&vb->queue, &vip->capture);
+/* Fetch the next buffer to activate */
+static void vip_active_buf_next(struct sta2x11_vip *vip)
+{
+	/* Get the next buffer */
+	spin_lock(&vip->lock);
+	if (list_empty(&vip->buffer_list)) {/* No available buffer */
+		spin_unlock(&vip->lock);
 		return;
 	}
-
-	vip->started = 1;
+	vip->active = list_first_entry(&vip->buffer_list,
+				       struct vip_buffer,
+				       list);
+	/* Reset Top and Bottom counter */
 	vip->tcount = 0;
 	vip->bcount = 0;
-	vip->active = vb;
-	vb->state = VIDEOBUF_ACTIVE;
+	spin_unlock(&vip->lock);
+	if (vb2_is_streaming(&vip->vb_vidq)) {	/* streaming is on */
+		start_dma(vip, vip->active);	/* start dma capture */
+	}
+}
 
-	dma = videobuf_to_dma_contig(vb);
 
-	REG_WRITE(vip, DVP_TFO, (0 << 16) | (0));
-	/* despite of interlace mode, upper and lower frames start at zero */
-	REG_WRITE(vip, DVP_BFO, (0 << 16) | (0));
+/* Videobuf2 Operations */
+static int queue_setup(struct vb2_queue *vq, const struct v4l2_format *fmt,
+		       unsigned int *nbuffers, unsigned int *nplanes,
+		       unsigned int sizes[], void *alloc_ctxs[])
+{
+	struct sta2x11_vip *vip = vb2_get_drv_priv(vq);
 
-	switch (vip->format.field) {
-	case V4L2_FIELD_INTERLACED:
-		REG_WRITE(vip, DVP_TFS,
-			  ((vip->format.height / 2 - 1) << 16) |
-			  (2 * vip->format.width - 1));
-		REG_WRITE(vip, DVP_BFS, ((vip->format.height / 2 - 1) << 16) |
-			  (2 * vip->format.width - 1));
-		REG_WRITE(vip, DVP_VTP, dma);
-		REG_WRITE(vip, DVP_VBP, dma + vip->format.width * 2);
-		REG_WRITE(vip, DVP_VMP, 4 * vip->format.width);
-		break;
-	case V4L2_FIELD_TOP:
-		REG_WRITE(vip, DVP_TFS,
-			  ((vip->format.height - 1) << 16) |
-			  (2 * vip->format.width - 1));
-		REG_WRITE(vip, DVP_BFS, ((0) << 16) |
-			  (2 * vip->format.width - 1));
-		REG_WRITE(vip, DVP_VTP, dma);
-		REG_WRITE(vip, DVP_VBP, dma);
-		REG_WRITE(vip, DVP_VMP, 2 * vip->format.width);
-		break;
-	case V4L2_FIELD_BOTTOM:
-		REG_WRITE(vip, DVP_TFS, ((0) << 16) |
-			  (2 * vip->format.width - 1));
-		REG_WRITE(vip, DVP_BFS,
-			  ((vip->format.height) << 16) |
-			  (2 * vip->format.width - 1));
-		REG_WRITE(vip, DVP_VTP, dma);
-		REG_WRITE(vip, DVP_VBP, dma);
-		REG_WRITE(vip, DVP_VMP, 2 * vip->format.width);
-		break;
+	if (!(*nbuffers) || *nbuffers < MAX_FRAMES)
+		*nbuffers = MAX_FRAMES;
 
-	default:
-		pr_warning("VIP: unknown field format\n");
-		return;
-	}
+	*nplanes = 1;
+	sizes[0] = vip->format.sizeimage;
+	alloc_ctxs[0] = vip->alloc_ctx;
 
-	REG_WRITE(vip, DVP_CTL, DVP_CTL_ENA);
-}
+	vip->sequence = 0;
+	vip->active = NULL;
+	vip->tcount = 0;
+	vip->bcount = 0;
 
-/**
- * buff_release - release buffer
- * @vq: queue in videobuf layer
- * @vb: buffer to be released
- *
- * release buffer in videobuf layer
- */
-static void buf_release(struct videobuf_queue *vq, struct videobuf_buffer *vb)
+	return 0;
+};
+static int buffer_init(struct vb2_buffer *vb)
 {
+	struct vip_buffer *vip_buf = to_vip_buffer(vb);
 
-	videobuf_dma_contig_free(vq, vb);
-	vb->state = VIDEOBUF_NEEDS_INIT;
+	vip_buf->dma = vb2_dma_contig_plane_dma_addr(vb, 0);
+	INIT_LIST_HEAD(&vip_buf->list);
+	return 0;
 }
 
-static struct videobuf_queue_ops vip_qops = {
-	.buf_setup = buf_setup,
-	.buf_prepare = buf_prepare,
-	.buf_queue = buf_queue,
-	.buf_release = buf_release,
-};
-
-/**
- * vip_open - open video device
- * @file: descriptor of device
- *
- * open device, make sure it is only opened once.
- * return value: 0, no error.
- *
- * -EBUSY, device is already opened
- *
- * -ENOMEM, no memory for auxiliary DMA buffer
- */
-static int vip_open(struct file *file)
+static int buffer_prepare(struct vb2_buffer *vb)
 {
-	struct video_device *dev = video_devdata(file);
-	struct sta2x11_vip *vip = video_get_drvdata(dev);
+	struct sta2x11_vip *vip = vb2_get_drv_priv(vb->vb2_queue);
+	struct vip_buffer *vip_buf = to_vip_buffer(vb);
+	unsigned long size;
+
+	size = vip->format.sizeimage;
+	if (vb2_plane_size(vb, 0) < size) {
+		v4l2_err(&vip->v4l2_dev, "buffer too small (%lu < %lu)\n",
+			 vb2_plane_size(vb, 0), size);
+		return -EINVAL;
+	}
 
-	mutex_lock(&vip->mutex);
-	vip->users++;
+	vb2_set_plane_payload(&vip_buf->vb, 0, size);
 
-	if (vip->users > 1) {
-		vip->users--;
-		mutex_unlock(&vip->mutex);
-		return -EBUSY;
+	return 0;
+}
+static void buffer_queue(struct vb2_buffer *vb)
+{
+	struct sta2x11_vip *vip = vb2_get_drv_priv(vb->vb2_queue);
+	struct vip_buffer *vip_buf = to_vip_buffer(vb);
+
+	spin_lock(&vip->lock);
+	list_add_tail(&vip_buf->list, &vip->buffer_list);
+	if (!vip->active) {	/* No active buffer, active the first one */
+		vip->active = list_first_entry(&vip->buffer_list,
+					       struct vip_buffer,
+					       list);
+		if (vb2_is_streaming(&vip->vb_vidq))	/* streaming is on */
+			start_dma(vip, vip_buf);	/* start dma capture */
 	}
+	spin_unlock(&vip->lock);
+}
+static int buffer_finish(struct vb2_buffer *vb)
+{
+	struct sta2x11_vip *vip = vb2_get_drv_priv(vb->vb2_queue);
+	struct vip_buffer *vip_buf = to_vip_buffer(vb);
 
-	file->private_data = dev;
-	vip->overflow = 0;
-	vip->started = 0;
-	vip->closing = 0;
-	vip->active = NULL;
+	/* Buffer handled, remove it from the list */
+	spin_lock(&vip->lock);
+	list_del_init(&vip_buf->list);
+	spin_unlock(&vip->lock);
 
-	INIT_LIST_HEAD(&vip->capture);
-	vip->mem_spare = dma_alloc_coherent(&vip->pdev->dev, 64,
-					    &vip->dma_spare, GFP_KERNEL);
-	if (!vip->mem_spare) {
-		vip->users--;
-		mutex_unlock(&vip->mutex);
-		return -ENOMEM;
-	}
+	vip_active_buf_next(vip);
 
-	mutex_unlock(&vip->mutex);
-	videobuf_queue_dma_contig_init_cached(&vip->vb_vidq,
-					      &vip_qops,
-					      &vip->pdev->dev,
-					      &vip->slock,
-					      V4L2_BUF_TYPE_VIDEO_CAPTURE,
-					      V4L2_FIELD_INTERLACED,
-					      sizeof(struct videobuf_buffer),
-					      vip, NULL);
-	REG_READ(vip, DVP_ITS);
-	REG_WRITE(vip, DVP_HLFLN, DVP_HLFLN_SD);
-	REG_WRITE(vip, DVP_ITM, DVP_IT_VSB | DVP_IT_VST);
-	REG_WRITE(vip, DVP_CTL, DVP_CTL_RST);
-	REG_WRITE(vip, DVP_CTL, 0);
-	REG_READ(vip, DVP_ITS);
 	return 0;
 }
 
-/**
- * vip_close - close video device
- * @file: descriptor of device
- *
- * close video device, wait until all pending operations are finished
- * ( maximum FRAME_MAX buffers pending )
- * Turn off interrupts.
- *
- * return value: 0, always succesful.
- */
-static int vip_close(struct file *file)
+static int start_streaming(struct vb2_queue *vq, unsigned int count)
 {
-	struct video_device *dev = video_devdata(file);
-	struct sta2x11_vip *vip = video_get_drvdata(dev);
+	struct sta2x11_vip *vip = vb2_get_drv_priv(vq);
 
-	vip->closing = 1;
-	if (vip->active)
-		videobuf_waiton(&vip->vb_vidq, vip->active, 0, 0);
 	spin_lock_irq(&vip->slock);
-
-	REG_WRITE(vip, DVP_ITM, 0);
-	REG_WRITE(vip, DVP_CTL, DVP_CTL_RST);
-	REG_WRITE(vip, DVP_CTL, 0);
-	REG_READ(vip, DVP_ITS);
-
-	vip->started = 0;
-	vip->active = NULL;
-
+	/* Enable interrupt VSYNC Top and Bottom*/
+	reg_write(vip, DVP_ITM, DVP_IT_VSB | DVP_IT_VST);
 	spin_unlock_irq(&vip->slock);
 
-	videobuf_stop(&vip->vb_vidq);
-	videobuf_mmap_free(&vip->vb_vidq);
+	if (count)
+		start_dma(vip, vip->active);
 
-	dma_free_coherent(&vip->pdev->dev, 64, vip->mem_spare, vip->dma_spare);
-	file->private_data = NULL;
-	mutex_lock(&vip->mutex);
-	vip->users--;
-	mutex_unlock(&vip->mutex);
 	return 0;
 }
 
-/**
- * vip_read - read from video input
- * @file: descriptor of device
- * @data: user buffer
- * @count: number of bytes to be read
- * @ppos: position within stream
- *
- * read video data from video device.
- * handling is done in generic videobuf layer
- * return value: provided by videobuf layer
- */
-static ssize_t vip_read(struct file *file, char __user *data,
-			size_t count, loff_t *ppos)
+/* abort streaming and wait for last buffer */
+static int stop_streaming(struct vb2_queue *vq)
 {
-	struct video_device *dev = file->private_data;
-	struct sta2x11_vip *vip = video_get_drvdata(dev);
-
-	return videobuf_read_stream(&vip->vb_vidq, data, count, ppos, 0,
-				    file->f_flags & O_NONBLOCK);
+	struct sta2x11_vip *vip = vb2_get_drv_priv(vq);
+	struct vip_buffer *vip_buf, *node;
+
+	/* Disable acquisition */
+	reg_write(vip, DVP_CTL, reg_read(vip, DVP_CTL) & ~DVP_CTL_ENA);
+	/* Disable all interrupts */
+	reg_write(vip, DVP_ITM, 0);
+
+	/* Release all active buffers */
+	spin_lock(&vip->lock);
+	list_for_each_entry_safe(vip_buf, node, &vip->buffer_list, list) {
+		vb2_buffer_done(&vip_buf->vb, VB2_BUF_STATE_ERROR);
+		list_del(&vip_buf->list);
+	}
+	spin_unlock(&vip->lock);
+	return 0;
 }
 
-/**
- * vip_mmap - map user buffer
- * @file: descriptor of device
- * @vma: user buffer
- *
- * map user space buffer into kernel mode, including DMA address.
- * handling is done in generic videobuf layer.
- * return value: provided by videobuf layer
- */
-static int vip_mmap(struct file *file, struct vm_area_struct *vma)
-{
-	struct video_device *dev = file->private_data;
-	struct sta2x11_vip *vip = video_get_drvdata(dev);
+static struct vb2_ops vip_video_qops = {
+	.queue_setup		= queue_setup,
+	.buf_init		= buffer_init,
+	.buf_prepare		= buffer_prepare,
+	.buf_finish		= buffer_finish,
+	.buf_queue		= buffer_queue,
+	.start_streaming	= start_streaming,
+	.stop_streaming		= stop_streaming,
+};
 
-	return videobuf_mmap_mapper(&vip->vb_vidq, vma);
-}
 
-/**
- * vip_poll - poll for event
- * @file: descriptor of device
- * @wait: contains events to be waited for
- *
- * wait for event related to video device.
- * handling is done in generic videobuf layer.
- * return value: provided by videobuf layer
- */
-static unsigned int vip_poll(struct file *file, struct poll_table_struct *wait)
-{
-	struct video_device *dev = file->private_data;
-	struct sta2x11_vip *vip = video_get_drvdata(dev);
+/* File Operations */
+static const struct v4l2_file_operations vip_fops = {
+	.owner = THIS_MODULE,
+	.open = v4l2_fh_open,
+	.release = vb2_fop_release,
+	.unlocked_ioctl = video_ioctl2,
+	.read = vb2_fop_read,
+	.mmap = vb2_fop_mmap,
+	.poll = vb2_fop_poll
+};
 
-	return videobuf_poll_stream(file, &vip->vb_vidq, wait);
-}
 
 /**
  * vidioc_querycap - return capabilities of device
- * @file: descriptor of device (not used)
- * @priv: points to current videodevice
+ * @file: descriptor of device
  * @cap: contains return values
  *
  * the capabilities of the device are returned
@@ -527,25 +413,22 @@ static unsigned int vip_poll(struct file *file, struct poll_table_struct *wait)
 static int vidioc_querycap(struct file *file, void *priv,
 			   struct v4l2_capability *cap)
 {
-	struct video_device *dev = priv;
-	struct sta2x11_vip *vip = video_get_drvdata(dev);
+	struct sta2x11_vip *vip = video_drvdata(file);
 
-	memset(cap, 0, sizeof(struct v4l2_capability));
-	strcpy(cap->driver, DRV_NAME);
-	strcpy(cap->card, DRV_NAME);
-	cap->version = 0;
+	strcpy(cap->driver, KBUILD_MODNAME);
+	strcpy(cap->card, KBUILD_MODNAME);
 	snprintf(cap->bus_info, sizeof(cap->bus_info), "PCI:%s",
 		 pci_name(vip->pdev));
-	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE |
-	    V4L2_CAP_STREAMING;
+	cap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE |
+			   V4L2_CAP_STREAMING;
+	cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS;
 
 	return 0;
 }
 
 /**
  * vidioc_s_std - set video standard
- * @file: descriptor of device (not used)
- * @priv: points to current videodevice
+ * @file: descriptor of device
  * @std: contains standard to be set
  *
  * the video standard is set
@@ -558,8 +441,7 @@ static int vidioc_querycap(struct file *file, void *priv,
  */
 static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id *std)
 {
-	struct video_device *dev = priv;
-	struct sta2x11_vip *vip = video_get_drvdata(dev);
+	struct sta2x11_vip *vip = video_drvdata(file);
 	v4l2_std_id oldstd = vip->std, newstd;
 	int status;
 
@@ -592,8 +474,7 @@ static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id *std)
 
 /**
  * vidioc_g_std - get video standard
- * @file: descriptor of device (not used)
- * @priv: points to current videodevice
+ * @file: descriptor of device
  * @std: contains return values
  *
  * the current video standard is returned
@@ -602,8 +483,7 @@ static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id *std)
  */
 static int vidioc_g_std(struct file *file, void *priv, v4l2_std_id *std)
 {
-	struct video_device *dev = priv;
-	struct sta2x11_vip *vip = video_get_drvdata(dev);
+	struct sta2x11_vip *vip = video_drvdata(file);
 
 	*std = vip->std;
 	return 0;
@@ -611,8 +491,7 @@ static int vidioc_g_std(struct file *file, void *priv, v4l2_std_id *std)
 
 /**
  * vidioc_querystd - get possible video standards
- * @file: descriptor of device (not used)
- * @priv: points to current videodevice
+ * @file: descriptor of device
  * @std: contains return values
  *
  * all possible video standards are returned
@@ -621,79 +500,11 @@ static int vidioc_g_std(struct file *file, void *priv, v4l2_std_id *std)
  */
 static int vidioc_querystd(struct file *file, void *priv, v4l2_std_id *std)
 {
-	struct video_device *dev = priv;
-	struct sta2x11_vip *vip = video_get_drvdata(dev);
+	struct sta2x11_vip *vip = video_drvdata(file);
 
 	return v4l2_subdev_call(vip->decoder, video, querystd, std);
-
 }
 
-/**
- * vidioc_queryctl - get possible control settings
- * @file: descriptor of device (not used)
- * @priv: points to current videodevice
- * @ctrl: contains return values
- *
- * return possible values for a control
- * return value: delivered by video DAC routine.
- */
-static int vidioc_queryctrl(struct file *file, void *priv,
-			    struct v4l2_queryctrl *ctrl)
-{
-	struct video_device *dev = priv;
-	struct sta2x11_vip *vip = video_get_drvdata(dev);
-
-	return v4l2_subdev_call(vip->decoder, core, queryctrl, ctrl);
-}
-
-/**
- * vidioc_g_ctl - get control value
- * @file: descriptor of device (not used)
- * @priv: points to current videodevice
- * @ctrl: contains return values
- *
- * return setting for a control value
- * return value: delivered by video DAC routine.
- */
-static int vidioc_g_ctrl(struct file *file, void *priv,
-			 struct v4l2_control *ctrl)
-{
-	struct video_device *dev = priv;
-	struct sta2x11_vip *vip = video_get_drvdata(dev);
-
-	return v4l2_subdev_call(vip->decoder, core, g_ctrl, ctrl);
-}
-
-/**
- * vidioc_s_ctl - set control value
- * @file: descriptor of device (not used)
- * @priv: points to current videodevice
- * @ctrl: contains value to be set
- *
- * set value for a specific control
- * return value: delivered by video DAC routine.
- */
-static int vidioc_s_ctrl(struct file *file, void *priv,
-			 struct v4l2_control *ctrl)
-{
-	struct video_device *dev = priv;
-	struct sta2x11_vip *vip = video_get_drvdata(dev);
-
-	return v4l2_subdev_call(vip->decoder, core, s_ctrl, ctrl);
-}
-
-/**
- * vidioc_enum_input - return name of input line
- * @file: descriptor of device (not used)
- * @priv: points to current videodevice
- * @inp: contains return values
- *
- * the user friendly name of the input line is returned
- *
- * return value: 0, no error.
- *
- * -EINVAL, input line number out of range
- */
 static int vidioc_enum_input(struct file *file, void *priv,
 			     struct v4l2_input *inp)
 {
@@ -709,8 +520,7 @@ static int vidioc_enum_input(struct file *file, void *priv,
 
 /**
  * vidioc_s_input - set input line
- * @file: descriptor of device ( not used)
- * @priv: points to current videodevice
+ * @file: descriptor of device
  * @i: new input line number
  *
  * the current active input line is set
@@ -721,8 +531,7 @@ static int vidioc_enum_input(struct file *file, void *priv,
  */
 static int vidioc_s_input(struct file *file, void *priv, unsigned int i)
 {
-	struct video_device *dev = priv;
-	struct sta2x11_vip *vip = video_get_drvdata(dev);
+	struct sta2x11_vip *vip = video_drvdata(file);
 	int ret;
 
 	if (i > 1)
@@ -737,8 +546,7 @@ static int vidioc_s_input(struct file *file, void *priv, unsigned int i)
 
 /**
  * vidioc_g_input - return input line
- * @file: descriptor of device ( not used)
- * @priv: points to current videodevice
+ * @file: descriptor of device
  * @i: returned input line number
  *
  * the current active input line is returned
@@ -747,8 +555,7 @@ static int vidioc_s_input(struct file *file, void *priv, unsigned int i)
  */
 static int vidioc_g_input(struct file *file, void *priv, unsigned int *i)
 {
-	struct video_device *dev = priv;
-	struct sta2x11_vip *vip = video_get_drvdata(dev);
+	struct sta2x11_vip *vip = video_drvdata(file);
 
 	*i = vip->input;
 	return 0;
@@ -756,8 +563,6 @@ static int vidioc_g_input(struct file *file, void *priv, unsigned int *i)
 
 /**
  * vidioc_enum_fmt_vid_cap - return video capture format
- * @file: descriptor of device ( not used)
- * @priv: points to current videodevice
  * @f: returned format information
  *
  * returns name and format of video capture
@@ -780,8 +585,7 @@ static int vidioc_enum_fmt_vid_cap(struct file *file, void *priv,
 
 /**
  * vidioc_try_fmt_vid_cap - set video capture format
- * @file: descriptor of device ( not used)
- * @priv: points to current videodevice
+ * @file: descriptor of device
  * @f: new format
  *
  * new video format is set which includes width and
@@ -797,12 +601,11 @@ static int vidioc_enum_fmt_vid_cap(struct file *file, void *priv,
 static int vidioc_try_fmt_vid_cap(struct file *file, void *priv,
 				  struct v4l2_format *f)
 {
-	struct video_device *dev = priv;
-	struct sta2x11_vip *vip = video_get_drvdata(dev);
+	struct sta2x11_vip *vip = video_drvdata(file);
 	int interlace_lim;
 
 	if (V4L2_PIX_FMT_UYVY != f->fmt.pix.pixelformat)
-		return -EINVAL;
+		v4l2_warn(&vip->v4l2_dev, "Invalid format, only UYVY supported\n");
 
 	if (V4L2_STD_525_60 & vip->std)
 		interlace_lim = 240;
@@ -810,6 +613,7 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv,
 		interlace_lim = 288;
 
 	switch (f->fmt.pix.field) {
+	default:
 	case V4L2_FIELD_ANY:
 		if (interlace_lim < f->fmt.pix.height)
 			f->fmt.pix.field = V4L2_FIELD_INTERLACED;
@@ -823,10 +627,10 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv,
 		break;
 	case V4L2_FIELD_INTERLACED:
 		break;
-	default:
-		return -EINVAL;
 	}
 
+	/* It is the only supported format */
+	f->fmt.pix.pixelformat = V4L2_PIX_FMT_UYVY;
 	f->fmt.pix.height &= ~1;
 	if (2 * interlace_lim < f->fmt.pix.height)
 		f->fmt.pix.height = 2 * interlace_lim;
@@ -842,8 +646,7 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv,
 
 /**
  * vidioc_s_fmt_vid_cap - set current video format parameters
- * @file: descriptor of device ( not used)
- * @priv: points to current videodevice
+ * @file: descriptor of device
  * @f: returned format information
  *
  * set new capture format
@@ -854,22 +657,63 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv,
 static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
 				struct v4l2_format *f)
 {
-	struct video_device *dev = priv;
-	struct sta2x11_vip *vip = video_get_drvdata(dev);
+	struct sta2x11_vip *vip = video_drvdata(file);
+	unsigned int t_stop, b_stop, pitch;
 	int ret;
 
 	ret = vidioc_try_fmt_vid_cap(file, priv, f);
 	if (ret)
 		return ret;
 
-	memcpy(&vip->format, &f->fmt.pix, sizeof(struct v4l2_pix_format));
+	if (vb2_is_busy(&vip->vb_vidq)) {
+		/* Can't change format during acquisition */
+		v4l2_err(&vip->v4l2_dev, "device busy\n");
+		return -EBUSY;
+	}
+	vip->format = f->fmt.pix;
+	switch (vip->format.field) {
+	case V4L2_FIELD_INTERLACED:
+		t_stop = ((vip->format.height / 2 - 1) << 16) |
+			 (2 * vip->format.width - 1);
+		b_stop = t_stop;
+		pitch = 4 * vip->format.width;
+		break;
+	case V4L2_FIELD_TOP:
+		t_stop = ((vip->format.height - 1) << 16) |
+			 (2 * vip->format.width - 1);
+		b_stop = (0 << 16) | (2 * vip->format.width - 1);
+		pitch = 2 * vip->format.width;
+		break;
+	case V4L2_FIELD_BOTTOM:
+		t_stop = (0 << 16) | (2 * vip->format.width - 1);
+		b_stop = (vip->format.height << 16) |
+			 (2 * vip->format.width - 1);
+		pitch = 2 * vip->format.width;
+		break;
+	default:
+		v4l2_err(&vip->v4l2_dev, "unknown field format\n");
+		return -EINVAL;
+	}
+
+	spin_lock_irq(&vip->slock);
+	/* Y-X Top Field Offset */
+	reg_write(vip, DVP_TFO, 0);
+	/* Y-X Bottom Field Offset */
+	reg_write(vip, DVP_BFO, 0);
+	/* Y-X Top Field Stop*/
+	reg_write(vip, DVP_TFS, t_stop);
+	/* Y-X Bottom Field Stop */
+	reg_write(vip, DVP_BFS, b_stop);
+	/* Video Memory Pitch */
+	reg_write(vip, DVP_VMP, pitch);
+	spin_unlock_irq(&vip->slock);
+
 	return 0;
 }
 
 /**
  * vidioc_g_fmt_vid_cap - get current video format parameters
- * @file: descriptor of device ( not used)
- * @priv: points to current videodevice
+ * @file: descriptor of device
  * @f: contains format information
  *
  * returns current video format parameters
@@ -879,150 +723,47 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
 static int vidioc_g_fmt_vid_cap(struct file *file, void *priv,
 				struct v4l2_format *f)
 {
-	struct video_device *dev = priv;
-	struct sta2x11_vip *vip = video_get_drvdata(dev);
-
-	memcpy(&f->fmt.pix, &vip->format, sizeof(struct v4l2_pix_format));
-	return 0;
-}
-
-/**
- * vidioc_reqfs - request buffer
- * @file: descriptor of device ( not used)
- * @priv: points to current videodevice
- * @p: video buffer
- *
- * Handling is done in generic videobuf layer.
- */
-static int vidioc_reqbufs(struct file *file, void *priv,
-			  struct v4l2_requestbuffers *p)
-{
-	struct video_device *dev = priv;
-	struct sta2x11_vip *vip = video_get_drvdata(dev);
-
-	return videobuf_reqbufs(&vip->vb_vidq, p);
-}
-
-/**
- * vidioc_querybuf - query buffer
- * @file: descriptor of device ( not used)
- * @priv: points to current videodevice
- * @p: video buffer
- *
- * query buffer state.
- * Handling is done in generic videobuf layer.
- */
-static int vidioc_querybuf(struct file *file, void *priv, struct v4l2_buffer *p)
-{
-	struct video_device *dev = priv;
-	struct sta2x11_vip *vip = video_get_drvdata(dev);
+	struct sta2x11_vip *vip = video_drvdata(file);
 
-	return videobuf_querybuf(&vip->vb_vidq, p);
-}
+	f->fmt.pix = vip->format;
 
-/**
- * vidioc_qbuf - queue a buffer
- * @file: descriptor of device ( not used)
- * @priv: points to current videodevice
- * @p: video buffer
- *
- * Handling is done in generic videobuf layer.
- */
-static int vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *p)
-{
-	struct video_device *dev = priv;
-	struct sta2x11_vip *vip = video_get_drvdata(dev);
-
-	return videobuf_qbuf(&vip->vb_vidq, p);
-}
-
-/**
- * vidioc_dqbuf - dequeue a buffer
- * @file: descriptor of device ( not used)
- * @priv: points to current videodevice
- * @p: video buffer
- *
- * Handling is done in generic videobuf layer.
- */
-static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *p)
-{
-	struct video_device *dev = priv;
-	struct sta2x11_vip *vip = video_get_drvdata(dev);
-
-	return videobuf_dqbuf(&vip->vb_vidq, p, file->f_flags & O_NONBLOCK);
-}
-
-/**
- * vidioc_streamon - turn on streaming
- * @file: descriptor of device ( not used)
- * @priv: points to current videodevice
- * @type: type of capture
- *
- * turn on streaming.
- * Handling is done in generic videobuf layer.
- */
-static int vidioc_streamon(struct file *file, void *priv,
-			   enum v4l2_buf_type type)
-{
-	struct video_device *dev = priv;
-	struct sta2x11_vip *vip = video_get_drvdata(dev);
-
-	return videobuf_streamon(&vip->vb_vidq);
-}
-
-/**
- * vidioc_streamoff - turn off streaming
- * @file: descriptor of device ( not used)
- * @priv: points to current videodevice
- * @type: type of capture
- *
- * turn off streaming.
- * Handling is done in generic videobuf layer.
- */
-static int vidioc_streamoff(struct file *file, void *priv,
-			    enum v4l2_buf_type type)
-{
-	struct video_device *dev = priv;
-	struct sta2x11_vip *vip = video_get_drvdata(dev);
-
-	return videobuf_streamoff(&vip->vb_vidq);
+	return 0;
 }
 
-static const struct v4l2_file_operations vip_fops = {
-	.owner = THIS_MODULE,
-	.open = vip_open,
-	.release = vip_close,
-	.ioctl = video_ioctl2,
-	.read = vip_read,
-	.mmap = vip_mmap,
-	.poll = vip_poll
-};
-
 static const struct v4l2_ioctl_ops vip_ioctl_ops = {
 	.vidioc_querycap = vidioc_querycap,
-	.vidioc_s_std = vidioc_s_std,
+	/* FMT handling */
+	.vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap,
+	.vidioc_g_fmt_vid_cap = vidioc_g_fmt_vid_cap,
+	.vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap,
+	.vidioc_try_fmt_vid_cap = vidioc_try_fmt_vid_cap,
+	/* Buffer handlers */
+	.vidioc_create_bufs = vb2_ioctl_create_bufs,
+	.vidioc_prepare_buf = vb2_ioctl_prepare_buf,
+	.vidioc_reqbufs = vb2_ioctl_reqbufs,
+	.vidioc_querybuf = vb2_ioctl_querybuf,
+	.vidioc_qbuf = vb2_ioctl_qbuf,
+	.vidioc_dqbuf = vb2_ioctl_dqbuf,
+	/* Stream on/off */
+	.vidioc_streamon = vb2_ioctl_streamon,
+	.vidioc_streamoff = vb2_ioctl_streamoff,
+	/* Standard handling */
 	.vidioc_g_std = vidioc_g_std,
+	.vidioc_s_std = vidioc_s_std,
 	.vidioc_querystd = vidioc_querystd,
-	.vidioc_queryctrl = vidioc_queryctrl,
-	.vidioc_g_ctrl = vidioc_g_ctrl,
-	.vidioc_s_ctrl = vidioc_s_ctrl,
+	/* Input handling */
 	.vidioc_enum_input = vidioc_enum_input,
-	.vidioc_try_fmt_vid_cap = vidioc_try_fmt_vid_cap,
-	.vidioc_s_input = vidioc_s_input,
 	.vidioc_g_input = vidioc_g_input,
-	.vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap,
-	.vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap,
-	.vidioc_g_fmt_vid_cap = vidioc_g_fmt_vid_cap,
-	.vidioc_reqbufs = vidioc_reqbufs,
-	.vidioc_querybuf = vidioc_querybuf,
-	.vidioc_qbuf = vidioc_qbuf,
-	.vidioc_dqbuf = vidioc_dqbuf,
-	.vidioc_streamon = vidioc_streamon,
-	.vidioc_streamoff = vidioc_streamoff,
+	.vidioc_s_input = vidioc_s_input,
+	/* Log status ioctl */
+	.vidioc_log_status = v4l2_ctrl_log_status,
+	/* Event handling */
+	.vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
+	.vidioc_unsubscribe_event = v4l2_event_unsubscribe,
 };
 
 static struct video_device video_dev_template = {
-	.name = DRV_NAME,
+	.name = KBUILD_MODNAME,
 	.release = video_device_release,
 	.fops = &vip_fops,
 	.ioctl_ops = &vip_ioctl_ops,
@@ -1036,9 +777,7 @@ static struct video_device video_dev_template = {
  *
  * check for both frame interrupts set ( top and bottom ).
  * check FIFO overflow, but limit number of log messages after open.
- * signal a complete buffer if done.
- * dequeue a new buffer if available.
- * disable VIP if no buffer available.
+ * signal a complete buffer if done
  *
  * return value: IRQ_NONE, interrupt was not generated by VIP
  *
@@ -1046,88 +785,122 @@ static struct video_device video_dev_template = {
  */
 static irqreturn_t vip_irq(int irq, struct sta2x11_vip *vip)
 {
-	u32 status, dma;
-	unsigned long flags;
-	struct videobuf_buffer *vb;
+	unsigned int status;
 
-	status = REG_READ(vip, DVP_ITS);
+	status = reg_read(vip, DVP_ITS);
 
-	if (!status) {
-		pr_debug("VIP: irq ignored\n");
+	if (!status)		/* No interrupt to handle */
 		return IRQ_NONE;
-	}
-
-	if (!vip->started)
-		return IRQ_HANDLED;
 
-	if (status & DVP_IT_VSB)
-		vip->bcount++;
-
-	if (status & DVP_IT_VST)
-		vip->tcount++;
+	if (status & DVP_IT_FIFO)
+		if (vip->overflow++ > 5)
+			pr_info("VIP: fifo overflow\n");
 
-	if ((DVP_IT_VSB | DVP_IT_VST) == (status & (DVP_IT_VST | DVP_IT_VSB))) {
+	if ((status & DVP_IT_VST) && (status & DVP_IT_VSB)) {
 		/* this is bad, we are too slow, hope the condition is gone
 		 * on the next frame */
-		pr_info("VIP: both irqs\n");
 		return IRQ_HANDLED;
 	}
 
-	if (status & DVP_IT_FIFO) {
-		if (5 > vip->overflow++)
-			pr_info("VIP: fifo overflow\n");
+	if (status & DVP_IT_VST)
+		if ((++vip->tcount) < 2)
+			return IRQ_HANDLED;
+	if (status & DVP_IT_VSB) {
+		vip->bcount++;
+		return IRQ_HANDLED;
 	}
 
-	if (2 > vip->tcount)
-		return IRQ_HANDLED;
+	if (vip->active) { /* Acquisition is over on this buffer */
+		/* Disable acquisition */
+		reg_write(vip, DVP_CTL, reg_read(vip, DVP_CTL) & ~DVP_CTL_ENA);
+		/* Remove the active buffer from the list */
+		do_gettimeofday(&vip->active->vb.v4l2_buf.timestamp);
+		vip->active->vb.v4l2_buf.sequence = vip->sequence++;
+		vb2_buffer_done(&vip->active->vb, VB2_BUF_STATE_DONE);
+	}
 
-	if (status & DVP_IT_VSB)
-		return IRQ_HANDLED;
+	return IRQ_HANDLED;
+}
 
-	spin_lock_irqsave(&vip->slock, flags);
+static void sta2x11_vip_init_register(struct sta2x11_vip *vip)
+{
+	/* Register initialization */
+	spin_lock_irq(&vip->slock);
+	/* Clean interrupt */
+	reg_read(vip, DVP_ITS);
+	/* Enable Half Line per vertical */
+	reg_write(vip, DVP_HLFLN, DVP_HLFLN_SD);
+	/* Reset VIP control */
+	reg_write(vip, DVP_CTL, DVP_CTL_RST);
+	/* Clear VIP control */
+	reg_write(vip, DVP_CTL, 0);
+	spin_unlock_irq(&vip->slock);
+}
+static void sta2x11_vip_clear_register(struct sta2x11_vip *vip)
+{
+	spin_lock_irq(&vip->slock);
+	/* Disable interrupt */
+	reg_write(vip, DVP_ITM, 0);
+	/* Reset VIP Control */
+	reg_write(vip, DVP_CTL, DVP_CTL_RST);
+	/* Clear VIP Control */
+	reg_write(vip, DVP_CTL, 0);
+	/* Clean VIP Interrupt */
+	reg_read(vip, DVP_ITS);
+	spin_unlock_irq(&vip->slock);
+}
+static int sta2x11_vip_init_buffer(struct sta2x11_vip *vip)
+{
+	int err;
 
-	REG_WRITE(vip, DVP_CTL, REG_READ(vip, DVP_CTL) & ~DVP_CTL_ENA);
-	if (vip->active) {
-		v4l2_get_timestamp(&vip->active->ts);
-		vip->active->field_count++;
-		vip->active->state = VIDEOBUF_DONE;
-		wake_up(&vip->active->done);
-		vip->active = NULL;
+	err = dma_set_coherent_mask(&vip->pdev->dev, DMA_BIT_MASK(29));
+	if (err) {
+		v4l2_err(&vip->v4l2_dev, "Cannot configure coherent mask");
+		return err;
 	}
-	if (!vip->closing) {
-		if (list_empty(&vip->capture))
-			goto done;
-
-		vb = list_first_entry(&vip->capture, struct videobuf_buffer,
-				      queue);
-		if (NULL == vb) {
-			pr_info("VIP: no buffer\n");
-			goto done;
-		}
-		vb->state = VIDEOBUF_ACTIVE;
-		list_del(&vb->queue);
-		vip->active = vb;
-		dma = videobuf_to_dma_contig(vb);
-		switch (vip->format.field) {
-		case V4L2_FIELD_INTERLACED:
-			REG_WRITE(vip, DVP_VTP, dma);
-			REG_WRITE(vip, DVP_VBP, dma + vip->format.width * 2);
-			break;
-		case V4L2_FIELD_TOP:
-		case V4L2_FIELD_BOTTOM:
-			REG_WRITE(vip, DVP_VTP, dma);
-			REG_WRITE(vip, DVP_VBP, dma);
-			break;
-		default:
-			pr_warning("VIP: unknown field format\n");
-			goto done;
-			break;
-		}
-		REG_WRITE(vip, DVP_CTL, REG_READ(vip, DVP_CTL) | DVP_CTL_ENA);
+	memset(&vip->vb_vidq, 0, sizeof(struct vb2_queue));
+	vip->vb_vidq.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	vip->vb_vidq.io_modes = VB2_MMAP | VB2_READ;
+	vip->vb_vidq.drv_priv = vip;
+	vip->vb_vidq.buf_struct_size = sizeof(struct vip_buffer);
+	vip->vb_vidq.ops = &vip_video_qops;
+	vip->vb_vidq.mem_ops = &vb2_dma_contig_memops;
+	err = vb2_queue_init(&vip->vb_vidq);
+	if (err)
+		return err;
+	INIT_LIST_HEAD(&vip->buffer_list);
+	spin_lock_init(&vip->lock);
+
+
+	vip->alloc_ctx = vb2_dma_contig_init_ctx(&vip->pdev->dev);
+	if (IS_ERR(vip->alloc_ctx)) {
+		v4l2_err(&vip->v4l2_dev, "Can't allocate buffer context");
+		return PTR_ERR(vip->alloc_ctx);
 	}
-done:
-	spin_unlock_irqrestore(&vip->slock, flags);
-	return IRQ_HANDLED;
+
+	return 0;
+}
+static void sta2x11_vip_release_buffer(struct sta2x11_vip *vip)
+{
+	vb2_dma_contig_cleanup_ctx(vip->alloc_ctx);
+}
+static int sta2x11_vip_init_controls(struct sta2x11_vip *vip)
+{
+	/*
+	 * Inititialize an empty control so VIP can inerithing controls
+	 * from ADV7180
+	 */
+	v4l2_ctrl_handler_init(&vip->ctrl_hdl, 0);
+
+	vip->v4l2_dev.ctrl_handler = &vip->ctrl_hdl;
+	if (vip->ctrl_hdl.error) {
+		int err = vip->ctrl_hdl.error;
+
+		v4l2_ctrl_handler_free(&vip->ctrl_hdl);
+		return err;
+	}
+
+	return 0;
 }
 
 /**
@@ -1212,10 +985,17 @@ static int __devinit sta2x11_vip_init_one(struct pci_dev *pdev,
 	struct sta2x11_vip *vip;
 	struct vip_config *config;
 
+	/* Check if hardware support 26-bit DMA */
+	if (dma_set_mask(&pdev->dev, DMA_BIT_MASK(26))) {
+		dev_err(&pdev->dev, "26-bit DMA addressing not available\n");
+		return -EINVAL;
+	}
+	/* Enable PCI */
 	ret = pci_enable_device(pdev);
 	if (ret)
 		return ret;
 
+	/* Get VIP platform data */
 	config = dev_get_platdata(&pdev->dev);
 	if (!config) {
 		dev_info(&pdev->dev, "VIP slot disabled\n");
@@ -1223,6 +1003,7 @@ static int __devinit sta2x11_vip_init_one(struct pci_dev *pdev,
 		goto disable;
 	}
 
+	/* Power configuration */
 	ret = vip_gpio_reserve(&pdev->dev, config->pwr_pin, 0,
 			       config->pwr_name);
 	if (ret)
@@ -1237,7 +1018,6 @@ static int __devinit sta2x11_vip_init_one(struct pci_dev *pdev,
 			goto disable;
 		}
 	}
-
 	if (config->pwr_pin != -1) {
 		/* Datasheet says 5ms between PWR and RST */
 		usleep_range(5000, 25000);
@@ -1251,17 +1031,20 @@ static int __devinit sta2x11_vip_init_one(struct pci_dev *pdev,
 	}
 	usleep_range(5000, 25000);
 
+	/* Allocate a new VIP instance */
 	vip = kzalloc(sizeof(struct sta2x11_vip), GFP_KERNEL);
 	if (!vip) {
 		ret = -ENOMEM;
 		goto release_gpios;
 	}
-
 	vip->pdev = pdev;
 	vip->std = V4L2_STD_PAL;
 	vip->format = formats_50[0];
 	vip->config = config;
 
+	ret = sta2x11_vip_init_controls(vip);
+	if (ret)
+		goto free_mem;
 	if (v4l2_device_register(&pdev->dev, &vip->v4l2_dev))
 		goto free_mem;
 
@@ -1271,46 +1054,52 @@ static int __devinit sta2x11_vip_init_one(struct pci_dev *pdev,
 
 	pci_set_master(pdev);
 
-	ret = pci_request_regions(pdev, DRV_NAME);
+	ret = pci_request_regions(pdev, KBUILD_MODNAME);
 	if (ret)
 		goto unreg;
 
 	vip->iomem = pci_iomap(pdev, 0, 0x100);
 	if (!vip->iomem) {
-		ret = -ENOMEM; /* FIXME */
+		ret = -ENOMEM;
 		goto release;
 	}
 
 	pci_enable_msi(pdev);
 
-	INIT_LIST_HEAD(&vip->capture);
+	/* Initialize buffer */
+	ret = sta2x11_vip_init_buffer(vip);
+	if (ret)
+		goto unmap;
+
 	spin_lock_init(&vip->slock);
-	mutex_init(&vip->mutex);
-	vip->started = 0;
-	vip->disabled = 0;
 
 	ret = request_irq(pdev->irq,
 			  (irq_handler_t) vip_irq,
-			  IRQF_SHARED, DRV_NAME, vip);
+			  IRQF_SHARED, KBUILD_MODNAME, vip);
 	if (ret) {
 		dev_err(&pdev->dev, "request_irq failed\n");
 		ret = -ENODEV;
-		goto unmap;
+		goto release_buf;
 	}
 
+	/* Alloc, initialize and register video device */
 	vip->video_dev = video_device_alloc();
 	if (!vip->video_dev) {
 		ret = -ENOMEM;
 		goto release_irq;
 	}
 
-	*(vip->video_dev) = video_dev_template;
+	vip->video_dev = &video_dev_template;
+	vip->video_dev->v4l2_dev = &vip->v4l2_dev;
+	vip->video_dev->queue = &vip->vb_vidq;
+	set_bit(V4L2_FL_USE_FH_PRIO, &vip->video_dev->flags);
 	video_set_drvdata(vip->video_dev, vip);
 
 	ret = video_register_device(vip->video_dev, VFL_TYPE_GRABBER, -1);
 	if (ret)
 		goto vrelease;
 
+	/* Get ADV7180 subdevice */
 	vip->adapter = i2c_get_adapter(vip->config->i2c_id);
 	if (!vip->adapter) {
 		ret = -ENODEV;
@@ -1328,10 +1117,11 @@ static int __devinit sta2x11_vip_init_one(struct pci_dev *pdev,
 	}
 
 	i2c_put_adapter(vip->adapter);
-
 	v4l2_subdev_call(vip->decoder, core, init, 0);
 
-	pr_info("STA2X11 Video Input Port (VIP) loaded\n");
+	sta2x11_vip_init_register(vip);
+
+	dev_info(&pdev->dev, "STA2X11 Video Input Port (VIP) loaded\n");
 	return 0;
 
 vunreg:
@@ -1343,10 +1133,12 @@ vrelease:
 		video_device_release(vip->video_dev);
 release_irq:
 	free_irq(pdev->irq, vip);
+release_buf:
+	sta2x11_vip_release_buffer(vip);
 	pci_disable_msi(pdev);
 unmap:
+	vb2_queue_release(&vip->vb_vidq);
 	pci_iounmap(pdev, vip->iomem);
-	mutex_destroy(&vip->mutex);
 release:
 	pci_release_regions(pdev);
 unreg:
@@ -1382,16 +1174,18 @@ static void __devexit sta2x11_vip_remove_one(struct pci_dev *pdev)
 	struct sta2x11_vip *vip =
 	    container_of(v4l2_dev, struct sta2x11_vip, v4l2_dev);
 
+	sta2x11_vip_clear_register(vip);
+
 	video_set_drvdata(vip->video_dev, NULL);
 	video_unregister_device(vip->video_dev);
 	/*do not call video_device_release() here, is already done */
 	free_irq(pdev->irq, vip);
 	pci_disable_msi(pdev);
+	vb2_queue_release(&vip->vb_vidq);
 	pci_iounmap(pdev, vip->iomem);
 	pci_release_regions(pdev);
 
 	v4l2_device_unregister(&vip->v4l2_dev);
-	mutex_destroy(&vip->mutex);
 
 	vip_gpio_release(&pdev->dev, vip->config->pwr_pin,
 			 vip->config->pwr_name);
@@ -1416,9 +1210,6 @@ static void __devexit sta2x11_vip_remove_one(struct pci_dev *pdev)
  *
  * return value: 0 always indicate success,
  * even if device could not be disabled. (workaround for hardware problem)
- *
- * reurn value : 0, always succesful, even if hardware does not not support
- * power down mode.
  */
 static int sta2x11_vip_suspend(struct pci_dev *pdev, pm_message_t state)
 {
@@ -1429,15 +1220,15 @@ static int sta2x11_vip_suspend(struct pci_dev *pdev, pm_message_t state)
 	int i;
 
 	spin_lock_irqsave(&vip->slock, flags);
-	vip->register_save_area[0] = REG_READ(vip, DVP_CTL);
-	REG_WRITE(vip, DVP_CTL, vip->register_save_area[0] & DVP_CTL_DIS);
-	vip->register_save_area[SAVE_COUNT] = REG_READ(vip, DVP_ITM);
-	REG_WRITE(vip, DVP_ITM, 0);
+	vip->register_save_area[0] = reg_read(vip, DVP_CTL);
+	reg_write(vip, DVP_CTL, vip->register_save_area[0] & DVP_CTL_DIS);
+	vip->register_save_area[SAVE_COUNT] = reg_read(vip, DVP_ITM);
+	reg_write(vip, DVP_ITM, 0);
 	for (i = 1; i < SAVE_COUNT; i++)
-		vip->register_save_area[i] = REG_READ(vip, 4 * i);
+		vip->register_save_area[i] = reg_read(vip, 4 * i);
 	for (i = 0; i < AUX_COUNT; i++)
 		vip->register_save_area[SAVE_COUNT + IRQ_COUNT + i] =
-		    REG_READ(vip, registers_to_save[i]);
+		    reg_read(vip, registers_to_save[i]);
 	spin_unlock_irqrestore(&vip->slock, flags);
 	/* save pci state */
 	pci_save_state(pdev);
@@ -1477,7 +1268,7 @@ static int sta2x11_vip_resume(struct pci_dev *pdev)
 	if (vip->disabled) {
 		ret = pci_enable_device(pdev);
 		if (ret) {
-			pr_warning("VIP: Can't enable device.\n");
+			pr_warn("VIP: Can't enable device.\n");
 			return ret;
 		}
 		vip->disabled = 0;
@@ -1488,7 +1279,7 @@ static int sta2x11_vip_resume(struct pci_dev *pdev)
 		 * do not call pci_disable_device on sta2x11 because it
 		 * break all other Bus masters on this EP
 		 */
-		pr_warning("VIP: Can't enable device.\n");
+		pr_warn("VIP: Can't enable device.\n");
 		vip->disabled = 1;
 		return ret;
 	}
@@ -1497,12 +1288,12 @@ static int sta2x11_vip_resume(struct pci_dev *pdev)
 
 	spin_lock_irqsave(&vip->slock, flags);
 	for (i = 1; i < SAVE_COUNT; i++)
-		REG_WRITE(vip, 4 * i, vip->register_save_area[i]);
+		reg_write(vip, 4 * i, vip->register_save_area[i]);
 	for (i = 0; i < AUX_COUNT; i++)
-		REG_WRITE(vip, registers_to_save[i],
+		reg_write(vip, registers_to_save[i],
 			  vip->register_save_area[SAVE_COUNT + IRQ_COUNT + i]);
-	REG_WRITE(vip, DVP_CTL, vip->register_save_area[0]);
-	REG_WRITE(vip, DVP_ITM, vip->register_save_area[SAVE_COUNT]);
+	reg_write(vip, DVP_CTL, vip->register_save_area[0]);
+	reg_write(vip, DVP_ITM, vip->register_save_area[SAVE_COUNT]);
 	spin_unlock_irqrestore(&vip->slock, flags);
 	return 0;
 }
@@ -1515,7 +1306,7 @@ static DEFINE_PCI_DEVICE_TABLE(sta2x11_vip_pci_tbl) = {
 };
 
 static struct pci_driver sta2x11_vip_driver = {
-	.name = DRV_NAME,
+	.name = KBUILD_MODNAME,
 	.probe = sta2x11_vip_init_one,
 	.remove = __devexit_p(sta2x11_vip_remove_one),
 	.id_table = sta2x11_vip_pci_tbl,
