diff mbox

PCTV 290e nanostick and remote control support

Message ID 1313282374.97725.YahooMailClassic@web121715.mail.ne1.yahoo.com (mailing list archive)
State Superseded, archived
Headers

Commit Message

Chris Rankin Aug. 14, 2011, 12:39 a.m. UTC 
  --- On Sat, 13/8/11, Antti Palosaari <crope@iki.fi> wrote:
> Remote is already supported, but from the 3.1 or maybe 3.2
> (I am not sure if Mauro was hurry to sent it 3.1).

Hi,

This appears to be the diff from 3.1 that adds RC support:


It certainly creates a new /dev/input/event? node, and allows me to program all but *one* button on the handset: the "OK" button. At this early stage, it would seem unlikely that this particular button is faulty. Could there be an error in the IR code configuration, please?

Or maybe someone else *does* have a PCTV 290e device where the OK button works?

Thanks,
Chris

--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

--- linux-3.0/drivers/media/video/em28xx/em28xx-cards.c.orig	2011-08-13 20:37:26.000000000 +0100
+++ linux-3.0/drivers/media/video/em28xx/em28xx-cards.c	2011-08-14 00:34:59.000000000 +0100
@@ -1773,13 +1773,13 @@ 
 	/* 2013:024f PCTV Systems nanoStick T2 290e.
 	 * Empia EM28174, Sony CXD2820R and NXP TDA18271HD/C2 */
 	[EM28174_BOARD_PCTV_290E] = {
+		.name          = "PCTV nanoStick T2 290e",
 		.i2c_speed      = EM2874_I2C_SECONDARY_BUS_SELECT |
 			EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_100_KHZ,
-		.xclk          = EM28XX_XCLK_FREQUENCY_12MHZ,
-		.name          = "PCTV Systems nanoStick T2 290e",
 		.tuner_type    = TUNER_ABSENT,
 		.tuner_gpio    = pctv_290e,
 		.has_dvb       = 1,
+		.ir_codes      = RC_MAP_PINNACLE_PCTV_HD,
 	},
 };
 const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);
--- linux-3.0/drivers/media/video/em28xx/em28xx-input.c.orig	2011-08-14 00:30:57.000000000 +0100
+++ linux-3.0/drivers/media/video/em28xx/em28xx-input.c	2011-08-14 00:31:20.000000000 +0100
@@ -372,6 +372,7 @@ 
 		ir->get_key = default_polling_getkey;
 		break;
 	case CHIP_ID_EM2874:
+	case CHIP_ID_EM28174:
 		ir->get_key = em2874_polling_getkey;
 		em28xx_write_regs(dev, EM2874_R50_IR_CONFIG, &ir_config, 1);
 		break;