LinuxTV Patchwork [RFC,V0,4/7,media] dt-bindings: mt8183: Added camera ISP Pass 1 dt-bindings

login
register
mail settings
Submitter Frederic Chen
Date Feb. 5, 2019, 6:42 a.m.
Message ID <1549348966-14451-5-git-send-email-frederic.chen@mediatek.com>
Download mbox | patch
Permalink /patch/54297/
State RFC
Delegated to: Hans Verkuil
Headers show

Comments

Frederic Chen - Feb. 5, 2019, 6:42 a.m.
From: Jungo Lin <jungo.lin@mediatek.com>

This patch adds DT binding document for the Pass 1 (P1) unit in
Mediatek's camera ISP system. The Pass 1 unit grabs the sensor data
out from the sensor interface, applies ISP effects and writes the
image data to DRAM.

Signed-off-by: Jungo Lin <jungo.lin@mediatek.com>
Signed-off-by: Frederic Chen <frederic.chen@mediatek.com>
---
 .../bindings/media/mediatek,mt8183-camisp.txt      | 59 ++++++++++++++++++++++
 1 file changed, 59 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/mediatek,mt8183-camisp.txt

Patch

diff --git a/Documentation/devicetree/bindings/media/mediatek,mt8183-camisp.txt b/Documentation/devicetree/bindings/media/mediatek,mt8183-camisp.txt
new file mode 100644
index 0000000..ba16b4e
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek,mt8183-camisp.txt
@@ -0,0 +1,59 @@ 
+* Mediatek Image Signal Processor Pass 1 (ISP P1)
+
+The Pass 1 unit of Mediatek's camera ISP system grabs the sensor data out
+from the sensor interface, applies ISP effects and writes the image data
+to DRAM. Furthermore, Pass 1 unit has the ability to output two different
+resolutions frames at the same time to increase the performance of the
+camera application.
+
+Required properties:
+- compatible: "mediatek,mt8183-camisp" for MT8183
+- reg: Must contain an entry for each entry in reg-names.
+- interrupts: interrupt number to the cpu.
+- iommus: should point to the respective IOMMU block with master port
+  as argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
+  for details.
+- power-domains : a phandle to the power domain of this local arbiter.
+- mediatek,smi : a phandle to the smi_common node.
+- clocks: device clocks, see
+  Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
+- clock-names: must be "CAMSYS_CAM_CGPDN" and "CAMSYS_CAMTG_CGPDN".
+- mediatek,larb: must contain the local arbiters in the current SOCs, see
+  Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
+  for details.
+- mediatek,vpu : the node of video processor unit
+- smem_device : the shared memory device managing the shared memory between
+  Pass 1 unit and the video processor unit
+
+Example:
+	camisp: camisp@1a000000 {
+		compatible = "mediatek,mt8183-camisp", "syscon";
+		reg = <0 0x1a000000 0 0x1000>,
+		      <0 0x1a003000 0 0x1000>,
+		      <0 0x1a004000 0 0x2000>,
+		      <0 0x1a006000 0 0x2000>;
+		reg-names = "camisp",
+		            "cam1",
+		            "cam2",
+		            "cam3";
+		interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_LOW>,
+				<GIC_SPI 254 IRQ_TYPE_LEVEL_LOW>,
+				<GIC_SPI 255 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "cam1",
+		            "cam2",
+		            "cam3";
+		iommus = <&iommu M4U_PORT_CAM_LSCI0>,
+				<&iommu M4U_PORT_CAM_LSCI1>,
+				<&iommu M4U_PORT_CAM_BPCI>;
+		#clock-cells = <1>;
+		power-domains = <&scpsys MT8183_POWER_DOMAIN_CAM>;
+		/* Camera CCF */
+		clocks = <&camsys CLK_CAM_CAM>,
+				<&camsys CLK_CAM_CAMTG>;
+		clock-names = "CAMSYS_CAM_CGPDN",
+				"CAMSYS_CAMTG_CGPDN";
+		mediatek,larb = <&larb3>,
+				<&larb6>;
+		mediatek,vpu = <&vpu>;
+		smem_device = <&cam_smem>;
+	};

Privacy Policy